Photochemical reaction of sulfur hexafluoride with water in low-temperature xenon matrices

Sulfur hexafluoride SF(6) is a very stable molecule with which very few reactions with other molecules have been reported. Here, we report a photochemical reaction of SF(6) with water molecules using a matrix-isolation technique, where SF(6) and H(2)O were co-condensed in Xe matrices, and the products were observed using infrared spectroscopy. Irradiation at 193 nm from an ArF excimer laser caused the simultaneous decomposition of SF(6) and H(2)O, which resulted in the production of novel species. Infrared spectra and molecular orbital calculations of the species showed that the product was a SF(4)?HF?HOF complex, which consists of hydrogen bonds and charge transfer interaction between S and F atoms. The assignment of the species was confirmed by isotope shifts using D and (18)O isotope substitutions.     

Some reactions of ammonium or hydrazinium fluorides with xenon difluoride or xenon hexafluoride

The reactions between ammonium fluoride, hydrazinium(1+) fluoride, hydrazinium(2+) fluoride and XeF₂ or XeF₆ were studied. It was found that Xe, HF, N₂ were formed in these reactions. Interestingly enough, beside of these gases nitrogen fluorides in different quantities were formed also. The courses and the products of the above reactions are compared with analogous reactions with KrF₂.     

The structure of xenon hexafluoride in the solid state

According to single crystal X-ray diffraction, neutron powder diffraction, solid state MAS NMR data, and differential scanning calorimetry, XeF₆ exists in at least six different modifications. Three of them are formed at temperatures above room temperature, one exists at room temperature, while two have been found at low temperatures. In the high temperature modifications XeF₆ forms a non-symmetric tetramer, better described as a cyclic trimer with a weakly associated monomer. The normal temperature modification is the previously described cubic phase IV, having disordered tetrameric and hexameric units. The low temperature modifications are regular tetramers. Only in presence of HF symmetric dimers are formed.     

Gas-phase reactions of atomic lanthanide cations with sulfur hexafluoride: periodicity in reactivity

Room-temperature reactions of sulfur hexafluoride (SF6) have been surveyed systematically with atomic lanthanide cations (Ln+, excluding Pm+) in the gas phase, using an inductively coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and product distributions were measured in helium at a pressure of 0.35 Torr and temperature of 295 K. All the Ln+ cations were observed to react efficiently (k/kc > 0.24) and predominantly by single and multiple F atom and fluoride abstraction to produce both LnFn+ and SFn+(where n = 1, 2, 3). The observed periodic trend in reaction efficiency along the lanthanide row matches the periodic trend in the electron-promotion energy of the Ln+ cation. A remarkable Arrhenius-like correlation is observed for the dependence of reactivity on promotion energy: the early and late lanthanide cations exhibit effective temperatures of 45 500 and 14 000 K, respectively. SFn+ product ions are observed to be unreactive with SF6, whereas up to two molecules of SF6 have been observed to add to LnFn+ product ions under the experimental operating conditions of the ICP/SIFT tandem mass spectrometer.     

Features of sulfur hexafluoride adsorption on carbon adsorbents

The isotherms describing excess adsorption of SF₆ and N₆I₆ on carbon adsorbents with different pore structures were measured at pressures of 0.001—2.4 and 0.0001—0.1 MPa, respectively, and temperatures of 298—408 E. A linear dependence of Henry"s constant on temperature in the lnK—10³/O coordinates was found for all the samples. The specific surface areas of the samples determined by the BET method from the SF₆ adsorption are lower than those derived from benzene adsorption. The most pronounced difference was found for the grafitized carbon black. When SF₆ was adsorbed on supermicroporous carbon AC-71 and on microporous carbons PAC and CMS, a hysteresis was found, which, unlike that on mesoporous carbon adsorbents, is observed in the initial region of the equilibrium pressures.     

Low-energy electron collisions with sulfur hexafluoride, SF(6)

We report calculated cross sections for elastic and electronically inelastic collisions of low-energy electrons with sulfur hexafluoride, SF(6). Elastic cross sections are computed within the fixed-nuclei approximation, with polarization effects incorporated. Inelastic cross sections for nine low-lying states are computed in a few-channel approximation. We compare our cross sections to previous experimental and computational results where possible.     

Infrared laser enhancement of the reaction of sulfur hexafluoride with sodium vapor

The vibrational energy dependence of the rate of the gas phase reaction of Na with SF₆ has been determined in a diffusion cloud experiment using CO₂ laser excitation. The “conversion efficiency” of ca. 40% for vibrational energy suggests a preference for vibrational over the translational energy when compared with “prior” statistical expectation.     

Upper critical solution temperatures of mixtures containing sulphur hexafluoride

The upper critical solution temperatures, UCST, of a number of mixtures of simple organic substances, including C₅ to C₁₀ alkanes, with sulphur hexafluoride are reported. These UCST are analysed in terms of the one fluid model in order to estimate an interaction parameter, ξ, which is a measure of the strength of the interactions between sulphur hexafluoride+organic molecule. The values of ξ are discussed briefly.Several of the systems studied exhibited the barotropic phenomenon.     

Fluorination of polymers by sulfur hexafluoride gas under electric discharge

Fluorination of low-density polyethylene, polyacetylene, and poly(vinyl alcohol) was carried out using SF₆ gas under electric discharge. The polymers were partially fluorinated and the extent of fluorination was more in the case of poly (vinyl alcohol) than the other two polymers. The fluorinated polymers were characterized by elemental analysis (Fluorine), IR, and x-ray diffraction. Optical transparency of the films was also measured. The fluorinated polymers show better solvent resistance and decreased transparency than the virgin polymer. © 1994 John Wiley & Sons, Inc.     

Extraction of polychlorinated biphenyl with supercritical carbon dioxide, sulfur hexafluoride and subcritical water

In the extraction of spiked PCB from soil, three extracting fluids were investigated: supercritical carbon dioxide (CO2), supercritical sulfur hexafluoride (SF6) and subcritical water. Among the tested fluids SF6 appeared to be appropriate especially for the extraction of low polar PCB. CO2 and water were found to be suitable for the quantitative extraction of all PCB. Water was judged as the best because of its low price, good availability and environmental safety.     

Extraction of polychlorinated biphenyl with supercritical carbon dioxide, sulfur hexafluoride and subcritical water

In the extraction of spiked PCB from soil, three extracting fluids were investigated: supercritical carbon dioxide (CO₂), supercritical sulfur hexafluoride (SF₆) and subcritical water. Among the tested fluids SF₆ appeared to be appropriate especially for the extraction of low polar PCB. CO₂ and water were found to be suitable for the quantitative extraction of all PCB. Water was judged as the best because of its low price, good availability and environmental safety.     

Heterogeneous interactions of calcite aerosol with sulfur dioxide and sulfur dioxide-nitric acid mixtures

The heterogeneous chemistry of sulfur dioxide with CaCO(3) (calcite) aerosol as a function of relative humidity (RH) has been studied under isolated particle conditions in an atmospheric reaction chamber using infrared absorption spectroscopy. The reaction of SO(2) with calcite produced gas phase CO(2) as a product in addition to the conversion of the particulate carbonate to sulfite. The reaction extent was found to increase with elevated RH, as has been observed for the similar reaction with HNO(3), but much higher relative humidities were needed to significantly enhance the reaction. Mixed experiments in which calcite aerosol was exposed to both HNO(3) and SO(2) were also performed. The overall reaction extent at a given relative humidity did not appear to be increased by having both reactant gases present. The role of carbonate aerosol as an atmospheric sink for sulfur dioxide and particulate nitrogen and sulfur correlations are discussed.     

Polymer film deposition in inductively coupled radio-frequency discharge plasma of perfluorocyclobutane mixed with sulfur hexafluoride

The effect of an SF₆ admixture on the rate of formation and the composition of a polymer film deposited on a substrate in low-pressure inductively coupled radiofrequency (RF) discharge plasma of C₄F₈ + SF₆ under the ion bombardment of the surface was studied. As found by spectroscopic measurements, the relative concentration of CF ₂ ^· and C ₂ ^· radicals increased as the concentration of SF₆ (<40%) in the mixture was increased. As demonstrated using X-ray photoelectron spectroscopy, the F/C ratio in the film decreased with the increasing amount of SF₆ and RF bias power. The mechanism of the ion-enhanced growth of a fluorocarbon film is discussed.     

The Gas-Solid Interface the adsorption of nitrogen,argon, neopentane,sulfur dioxide,carbon dioxide and sulfur hexafluoride on rhombic sulfur

Physical adsorption of the title compounds on rhombic sulfur of 0.4 to 0.5 m²/g is reported. The isotherms are of type II for N₂, Ar and C₅H₁₂, of type III for SO₂ and CO₂, and linear for SF₆. There is no hysteresis. The method of Ross & Olivier shows that the surface is relatively heterogenous (γ 17). Isosteric heats of adsorption and c values of the B.E.T. equation are also reported.     

Liquid crystals with partially fluorinated side chains: Highly polar materials with very low birefringence

Highly polar liquid crystals with very low birefringence were synthesized by a reaction sequence starting with the radical addition of a secondary alcohol to pentafluoropropene and perfluoropropene, respectively. The mesophases and electrooptical properties of the new materials were interpreted using a detailed computational analysis of the conformational equilibrium.     

Inorganic volatile fluorides obtained from electrical decomposition of sulfur hexafluoride in a quartz tube

Recent investigations on sulfur hexafluoride decomposition have shown the need of a rapid and efficient method for the qualitative and quantitative analysis of the reaction products. An analytical method for characterizing the gas mixture obtained from the decomposition of sulfur hexafluoride in a quartz reactor submitted to an r.f. discharge, is presented. A combination of gas-chromatographic, mass spectrometric and infrared spectrophotometric techniques has shown the presence of SF₆, SO₂F₂, SOF₄, SOF₂, SiF₄ and F₂ in the gas mixtures examined. For quantitative purposes a gas-chromatographic method has been found to be most suitable.     

Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces

The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.