锡存在下取代的炔丙基溴与醛反应的选择性

报道三甲基硅基和苯基取代的炔丙基溴在锡存在下与醛的反应, 并讨论了反应的选择性。三甲基硅基炔丙基溴与醛的反应产率约为71-84%。产物中丙二烯醇与高炔丙基醇之比在44 :56到25 : 75之间, 苯基炔丙基溴的反应得到了产物丙二烯醇。     

One-pot, solvent-free regioselective addition reactions of propargyl bromide to carbonyl compounds mediated by Zn-Cu couple

A Barbier-type propargylation of carbonyl compounds with propargyl bromide has been achieved with reactive zinc-copper couple under solvent-free conditions. The reaction of aldehydes with propargyl bromide produced the unique homopropargyl alcohols in excellent yields at room temperature without the formation of homoallenyl alcohols. The ketones reacted with propargyl bromide to give the corresponding homopropargyl alcohols in good to excellent yields at −14 to −16 °C. The advantages of this method are excellent yields, short reaction time, high regioselectivity, and avoidance of the use of organic solvents.     

Synthesis,cure, and composite properties of mixed allyl/propargyl cyclopentadiene resins

A series of thermosetting resins were synthesized via phase transfer reaction of allyl chloride and propargyl bromide with cyclopentadiene in the presence of a strong base. Feed ratios of 1 : 1, 3 : 1, and 5 : 1 allyl chloride to propargyl bromide were used to give resins with varying amounts of propargyl and allyl functionality. In all cases the resins could be thermally cured, without added catalyst, at temperatures below 275°C to give black, glassy, brittle materials with densities of 1.15. TGA evaluation of the resins, with heating to 1000°C, resulted in carbon yields ranging from 48 to 66% with increasing propargyl functionality causing increased values. Physical mixtures of ACP and PCP resins were also made and evaluated. Cure of the mixed materials also occurred below 275°C, and carbon yields were comparable to the corresponding APCP resin. APCP/carbon fiber composites gave good mechanical properties with flexural modulus values of 115–130 GPa and flexural strength values of 1000 MPa. Carbonization of 1 : 1 APCP/carbon fiber composites provided materials with interlaminar strength values of approximately 1.14 MPa. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2869–2876, 1998     

锡-铟促进和微波辐射辅助下醛和炔丙基溴的炔丙基化反应

A rapid and regioselective preparation of homopropargyl alcohols was reported. In the presence of SnCl2C6HsMe3NBr and microwave irradiation, the mixture of tin-indium and propargyl bromide reacted quickly with aldehydes in aqueous media to produce the homopropargyl alcohols exclusively in high yields. For benzaldehydes bearing different substituents, electronic effect of the substituents affected the reaction, the electron-withdrawing groups promoting the reaction and the electron-donating groups impeding the reaction. The reactions of benzaldehydes bearing an ortho substituent group on the phenyl ring with propargyl bromide may yield a mixture of regioisomers （homopropargyl and homoallenyl alcohols） or a single homoallenic alcohol due to the steric effect.     

Assembly of conjugated enynes and substituted indoles via CuI/amino acid-catalyzed coupling of 1-alkynes with vinyl iodides and 2-bromotrifluoroacetanilides

Cross-coupling of 1-alkynes with vinyl iodides occurs at 80 degrees C in dioxane catalyzed by CuI/N,N-dimethylglycine to afford conjugated enynes in good to excellent yields. Heating a mixture of 2-bromotrifluoroacetanilide, 1-alkyne, 2 mol % of CuI, 6 mol % of L-proline, and K(2)CO(3) in DMF at 80 degrees C leads to the formation of the corresponding indole. This conversion involves a CuI/L-proline-catalyzed coupling between aryl bromide and the 1-alkyne followed by a CuI-mediated cyclization process. An ortho-substituent effect directed by NHCOCF3 enables the reaction to proceed under these mild conditions. Both aryl acetylenes and O-protected propargyl alcohol can be applied, leading to 5-, 6-, or 7-substituted 2-aryl and protected 2-hydroxymethyl indoles in good yields. With simple aliphatic alkynes, however, lower yields were observed.     

Synthesis and structure of some substituted 2-amino-4-aryl-7-propargyloxy-4H-chromene-3-carbonitriles

A series of 2-amino-7-hydroxy-4H-chromene-3-carbonitriles 4a–l were synthesized through three-component reaction using sodium carbonate as a catalyst. The reaction was carried out in 96% ethanol-water medium (1:20 ratio in volume). Propargyl ether compounds 5a–l of these chromene-3-carbonitriles were successfully synthesized from corresponding hydroxyl chromene derivatives by reaction with propargyl bromide. Two different procedures were applied in this process: the procedure that used potassium carbonate in dried acetone and the procedure that used sodium hydride in dried DMF. The latter gave the ethers 5a–l in higher yields. The single-crystal X-ray structure of propargyl ether 5g has been recorded.     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Synthesis of Fréchet type dendritic benzyl propargyl ether and Fréchet type triazole dendrimer

Fréchet type dendritic benzyl propargyl ethers were synthesized by the reaction of propargyl bromide with the corresponding Fréchet type dendritic benzyl alcohol. A propargyl focal point functionalized dendrons were applied for the construction of symmetric and unsymmetric dendrimers containing 1,2,3-triazole rings as connectors via click chemistry with a tripodal azide core or a azide focal point functionalized Fréchet type dendrons.     

Propargyl bromide as an excellent alpha-bromoacetone equivalent: convenient and new route to alpha-aroylacetones

[reaction: see text] A variety of alpha-aroylacetones 4a-g have been prepared in excellent yields following a new protocol wherein alpha-aminonitriles 1a-g as the aryl acyl anion equivalents readily react with propargyl bromide as the alpha-bromoacetone equivalent. The alkylated product undergoes one-pot unmasking of the keto functionality along with Markovnikov's hydration of the terminal alkyne with CuSO4 x 5H2O in aqueous methanol at 60 degrees C to furnish the desired target in excellent isolated yields.     

Zn(II)/amine-catalyzed coupling reaction of alkylidenemalonates with propargyl alcohol: a one-pot synthesis of methylenetetrahydrofurans

[reaction: see text] A metal-catalyzed tandem 1,4-addition/cyclization between propargyl alcohol and a Michael acceptor, such as alkylidene malonate, has been developed. In the presence of catalytic amounts of zinc triflate [Zn(OTf)(2)] and triethylamine (Et(3)N), various 2-alkylidene-1,3-dicarbonyl compounds reacted with propargyl alcohol to give 3- or 4-methylene tetrahydrofurans in excellent yields.     

A simple approach to highly functionalized benzo[b]furans from phenols and aryl iodides via aryl propargyl ethers

A variety of mono- and disubstituted phenols are alkylated with propargyl bromide to give phenyl 2-propynyl ethers, which were further coupled with aryl iodides under Sonogashira reaction conditions to give 3-phenoxy-1-aryl-1-propyne derivatives. The latter compounds underwent an initial Claisen rearrangement followed by ring closure to give functionalized benzo[b]furans in moderate to good yields.     

镝促进下醛、酮与炔丙基溴及苯基炔丙基溴的高 选择性反应

在金属镝的促进下,醛、酮可与炔丙基溴反应,高选择性高产率地得到相应的高炔丙醇,没有发现连二烯醇的存在。当用苯基炔丙基溴代替炔丙基溴与醛、酮反应时,主要得到了相应的连二烯醇,而没有发现高炔丙醇的存在,由此提出了六元环过渡态的反应机理。     

In-MEDIATED ALLYLATION OF α-KETO ESTERS WITH ALLYL HALIDES*

The chemoselective reaction of α-keto esters with allyl halides, propargyl bromides, and allenyl bromide using indium metal afforded α-hydroxy-γ,δ-unsaturated esters in good to excellent yields under mild conditions.

     

Indium-mediated vic-diallylation/propargylation of phenacyl bromides: a facile synthesis of 4-arylocta-1,7-dien-4-ol derivatives

Phenacyl bromides undergo smooth vic-diallylation and dipropargylation with allyl and propargyl indium reagents generated in situ from metallic indium and allyl or propargyl bromide to produce 4-arylocta-1,7-dien-4-ol derivatives in good yields. Phenacyl chloride and azide also participated effectively in bis-allylation. Similar results are also obtained from in situ generated allyl or propargyl zinc bromide.     

Synthesis and properties of poly‐(2‐ethynylpyridinium bromide) having propargyl side chains

Poly‐(2‐ethynylpyridinum bromide) (PEPBP) having propargyl side chains was prepared by the direct polymerization of 2‐ethynylpyridine and propargyl bromide under mild reaction conditions without any initiator and catalysts. The polymerization proceeded well to give PEPBP with propargyl side chains in relatively high yields. Various spectral data for the polymer structure indicated that the conjugated polymer system having N‐propargylpyridinum substituent was formed. This ionic polymer was completely soluble in water, methanol, dimethylformamide, dimethyl sulfoxide, and N,N‐dimethylacetamide and well processable into thin homogeneous film. The photoluminescence intensity (λ_max = 760 nm) of this polymer increased as the temperature was increased. At 1 KHz and room temperature, this polymer has k′ = 2.9 and σ = 7.3 × 10^?10 (S/cm). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3151–3158, 2001     

Novel gallium-mediated C3-allylation of indoles and pyrroles in aqueous media promoted by Bu4NBr

A mild and efficient protocol for the coupling of indoles and pyrroles with allyl halides such as allyl bromide, crotyl bromide and propargyl bromide in the presence of gallium metal in a Bu₄NBr-DMF-H₂O system has been developed. The reaction is equally effective when cadmium is used in lieu of gallium and the corresponding 3-allyl indoles and 3-allyl pyrroles were obtained in almost comparable yields.     

Highly Selective Synthesis of Acetylenic Alcohols Promoted by Metallic Dysprosium in the Presence of Mercuric Chloride

Promoted by metallic dysprosium, carbonyl compounds react smoothly with propargyl bromide to afford the corresponding homopropargylic alcohols in good to excellent yields without observation of allenic alcohols. In addition, this reaction is regioselective and chemoselective.     

Diastereoselective synthesis of enantioenriched homopropargyl amino alcohols from α-dibenzylamino aldehydes and their use as chiral synthons

Homochiral α-dibenzylamino aldehydes, prepared from the corresponding α-amino acids, react with propargyl bromide and zinc in DMF/THF (1:1) or DMF/Et₂O (1:1) at 20 °C to afford, in good yields and dr, homopropargylic 1,2-amino alcohols. anti Diastereomers were always formed as major products in this reaction. These compounds are versatile intermediates for a variety of synthetic targets: γ-amino-β-hydroxy-ketones, 4-amino-1,3-diols, 1,7-diamino-2,6-diols, and ω-amino-δ-hydroxy esters.     

Lewis acid-promoted reactions of ethenetricarboxylates with γ-CF3-substituted propargyl alcohols

The Lewis acid-promoted reaction of an ethenetricarboxylate derivative (1) with CF₃-substituted propargyl alcohols has been examined. Reaction of γ-CF₃ propargyl alcohols in the presence of zinc bromide gave five-membered CF₃-containing tetrahydrofurans in 66-85% yield. The CF₃ group activates alkyne as an electron-withdrawing group. On the other hand, reaction of γ-trifluoromethyl-α-aryl propargyl alcohols 2 with 1 in the presence of 1 equiv of SnCl₄ gave cyclobutane derivatives 6 in 29-49% yield. Formation of cyclobutane 6a arises from the [2+2] cycloaddition between ethenetricarboxylate 1 and chloroallene 8, which is produced by the reaction of propargyl alcohol 2a and SnCl₄.     

Facile one-pot synthesis of photochromic pyrans

[reaction: see text]. Photochromic pyrans, including [3H]naphtho[2,1-b]pyrans, [2H]naphtho[1,2-b]pyrans, indeno-fused naphtho[1,2-b]pyrans, and heteroannulated pyrans, were synthesized in excellent yields through a facile one-pot procedure by reaction of propargyl alcohol and naphthol or phenol derivatives in the presence of 5 mol % PPTS and 2 equiv of (MeO)3CH. Symmetrical and nonsymmetrical bispyrans can also be prepared using the protocol.