焦炉烟气中全量多环芳烃分析方法

报道了利用处在制串联采样装置。优选出了比较理想的前处理方法，并用此方法对焦炉烟气中的全量多环芳烃进行了研究。滤膜颗粒物中的多环芳烃有６途中 ，聚氨酯泡沫吸附剂中有４９种。     

GC/MS法研究焦炉烟气中多环芳烃类污染物

焦炉烟气中的有机污染物种类繁多 ,但是对人类和生态环境有严重危害的主要是多环芳烃类化合物 [1～ 3] .由于该类化合物结构复杂 ,含量不等 ,因此 ,对其进行分析测试难度很大 .近年来 ,采用色谱 /质谱 (GC/ MS)联机、色谱 /红外 (GC/IR)联机、液相色谱 /质谱联机 (LC/ MS)以及超临界色谱 /质谱联机 (SFC/ MS)等新技术 ,对环境中的多环芳烃类化合物取得了高灵敏度和高选择性的定量分析结果 ,并获得了许多结构信息 .但在我国 ,只对个别地区进行了研究 [4～ 6] ,目前还难以普遍实现 .本文利用气相色谱 /质谱联用法 ,对鞍山钢铁公司炼焦…     

香烟烟雾冷凝液中多环芳烃的测定

吸烟对人的健康是有害的,它比大气污染对肺癌增长更具有直接关系。研究香烟烟雾冷凝液,发现其中有为数众多的多环芳烃,它就是引起癌变的原因。测香烟烟雾中的多环芳烃,将为生产无毒香烟提供科学依据,并对宣传戒烟也有积极作用。     

烟气中多环芳烃吸附脱除的研究

针对热电厂烟气中排放的多环芳烃（PAHs）污染物，在实验室规模上研究了六种吸附剂对烟气中典型的PAHs, 如萘（Nap）、芴（Flu）、菲（Phe）的吸附脱除行为。考察了吸附剂结构特征与Nap，Flu，Phe高温脱除的相关性，并对煤质活性炭（AC-1）在160 ℃～200 ℃下的吸附等温线进行了研究。结果表明，吸附剂对PAHs的吸附能力与其结构参数中BET表面积和微孔体积具有紧密相关性，而与中孔体积没有明显关系；活性炭表现出很好的脱除烟气中PAHs的作用；吸附剂对PAHs的吸附能力随着PAHs的质量分数增大而增大，随吸附温度的增加而减小；随着PAHs的碳原子数和芳环数增加，其在吸附剂上的吸附能力也增强。     

分子印迹聚合物选择性降低烟气中稠环芳烃类物质

以芘(PYR)为模板,由热引发本体聚合合成了芘分子印迹聚合物(MIP),考察了印迹聚合物的选择性吸附性能,采用Scatchard模型分析了印迹聚合物的结合特性,用离线固相萃取实验考察了印迹聚合物对同类底物的吸附能力,并将芘分子印迹聚合物应用到卷烟滤嘴中,用GC/MS法考察了卷烟主流烟气中稠环芳烃类物质释放量的变化。结果表明,芘分子印迹聚合物具有选择性降低卷烟烟气中稠环芳烃类物质的功能,当MIP添加量为1.5 mg时,能将卷烟烟气中的苯并[a]芘(B[a]P)、苯并(a)蒽(B[a]A)和苣(CHR)的释放量分别降低31.08%、25.69%和27.33%。     

烟气催化脱硝装置对多环芳烃排放特性的影响

通过对装有选择性催化还原(SCR)脱硝装置的燃煤锅炉排放烟气中的多环芳烃(PAHs)进行测试,分析比较了工业锅炉排放的PAHs经过SCR脱硝装置前后的排放特性变化.实验结果表明,烟气催化脱硝装置促进了PAHs含量的增加,特别是低环多环芳烃含量的增加,并提高了其毒性当量,但对PAHs在气相与颗粒相的分布影响不大.     

分子印迹聚合物选择性降低烟气中稠环芳烃类物质

以芘(PYR)为模板,由热引发本体聚合合成了芘分子印迹聚合物(MIP),考察了印迹聚合物的选择性吸附性能,采用Scatchard模型分析了印迹聚合物的结合特性,用离线固相萃取实验考察了印迹聚合物对同类底物的吸附能力,并将芘分子印迹聚合物应用到卷烟滤嘴中,用GC/MS法考察了卷烟主流烟气中稠环芳烃类物质释放量的变化。 结果表明,芘分子印迹聚合物具有选择性降低卷烟烟气中稠环芳烃类物质的功能,当MIP添加量为1.5 mg时,能将卷烟烟气中的苯并[a]芘(B[a]P)、苯并(a)蒽(B[a]A)和苣(CHR)的释放量分别降低31.08%、25.69%和27.33%。     

β-环糊精对燃煤焦油和烟气中环芳烃的清除作用

采用三维荧光法测定了7处产地煤样燃烧的焦油和烟气中多环芳烃（PAHs）的含量,焦油中PAHs含量为0.201～0.419 mg/g,烟气中PAHs含量为1.1～3.2 μg/g;测试了β-环糊精（β-CD）溶液对煤烟气中多环芳烃的清除作用,最高去除率可达65.6%。 结果表明：不同产地煤的烟气中PAHs含量不同, 煤焦油中PAHs浓度(mol/L)在10-5数量级,远高于烟气中的浓度(mol/L,10-7数量级)。 用β-CD去除不同产地煤燃烧烟气中多环芳烃的去除率不同。 所选7种煤平均清除率为38.4%。 β-CD溶液有希望成为煤烟气中多环芳烃的清除剂。     

HPLC法测定矿物油中多环芳烃

选择使用广泛且组成较复杂的润滑油基础油为代表,进行矿物油中多环芳烃的眦测定方法研究.探讨了样品的提取、固相萃取柱净化等前处理方法,同时也对眦的仪器测定条件进行了优化.     

多环芳烃暴露的生物标志物——尿中羟基多环芳烃

多环芳烃(PAHs) 是典型的持久性有机污染物,在职业高PAHs 暴露环境下,容易诱发肺癌、皮肤癌等癌症。对PAHs 的暴露评价可为流行病学研究和污染物风险评价等提供有效的数据。由于暴露途径的复杂化,采用尿样中PAHs 的代谢产物———羟基多环芳烃作为标志物来综合评价人体对PAHs 的内暴露情况已经成为研究的热点。本文系统介绍了多环芳烃的吸收、代谢、尿中PAHs 代谢产物的主要存在形式、主要的生物标志物以及它们的主要影响因素。     

Solubilities of families of heterocyclic polynuclear aromatics in organic solvents and their mixtures

The solubilities of anthracene, acridine, xanthene, thioxanthene, carbazole, dibenzofuran, and dibenzothiophene have been experimentally determined in benzene, cyclohexane, thiophene, and pyridine from ambient temperature to approximately 440 K. The results have been correlated using the classical equation for solid-liquid solubility to obtain the experimental activity coefficient of the solute in the solvent. These experimental activity coefficients have been regressed, using three common solution models, to find the binary interaction parameters needed in those models. The solubilities of biphenyl, dibenzofuran, and dibenzothiophene have been experimentally determined in five binary mixtures of the solvents. The experimental activity coefficients have been found and compared to the values predicted by the four solution models, using the binary interaction parameters obtained from the solubilities in the pure solvents and solventsolvent binary interaction parameters obtained from literature vaporliquid equilibria data. The effect of substituting various heteroatoms into the ring structure has been discussed.     

同步荧光法检测鱼胆汁中的1-羟基芘

建立了和同步荧光法测定鱼胆汁的1－羟基芘（1－HP）的方法。该方法通过直接测定鱼胆汁的多环芳烃（PAHs)的代谢产物之一1－HP，用于判断PAHs生物有效部分对海岸养殖水环境的污染程度。以真鲷（Pargrosomus major，简称Pm），Mian鱼（Niba miichthys，简称Nm）为实验对象，现场实验结果令人满意。     

Molecular site assessment and process monitoring in bioremediation and natural attenuation

A variety of modern biotechnical approaches are available to assist in optimizing and controlling bioremediation processes. These approaches are broad-ranging, and may include genetic engineering to improve biodegradative performance, maintenance of the environment, and process monitoring and control. In addition to direct genetic engineering strategies, molecular diagnostic and monitoring technology using DNA gene probing methods and new quantitative mRNA analytical procedures allows direct analysis of degradative capacity, activity, and response underin situ conditions. Applications of these molecular approaches in process developments for trichloroethylene (TCE), polychlorinated biphenyls (PCB), and polynuclear aromatic hydrocarbons (PAH) bio-oxidation in soils, aquifer sediments, and ground-water treatment reactors have been demonstrated. Molecular genetic technologies permit not only the development of new processes for bioremediation, but also new process monitoring, control strategies, and molecular optimization paradigms that take full advantage of vast and diverse abilities of microorganisms to destroy problem chemicals.     

Selective Oxidation of Alkyl‐Substituted Polyaromatics Using Ruthenium‐Ion‐Catalyzed Oxidation

Ruthenium‐ion‐catalyzed oxidation of a range of alkylated polyaromatics has been studied. 2‐Ethylnaphthalene was used as a model substrate, and oxidation can be performed in either a conventional biphasic or in a monophasic solvent system. In either case the reaction rates and product selectivity are identical. The reaction products indicate that the aromatic ring system is oxidized in preference to the alkyl chain. This analysis is possible due to the development of a quantitative NMR protocol to determine the relative amounts of aliphatic and aromatic protons. From a systematic set of substrates we show that as the length of the alkyl chain substituent on a polyaromatic increases, the proportion of products in which the chain remains attached to the aromatic system increases. Larger polyaromatic systems, based on pyrene and phenanthrene, show greater reactivity than those with fewer aromatic rings, and the alkyl chains are more stable to oxidation.     

The Molecular Composition of Soot

Soot (sometimes referred to as black carbon) is produced when hydrocarbon fuels are burned. Our hypothesis is that polynuclear aromatic hydrocarbon (PAH) molecules are the dominant component of soot, with individual PAH molecules forming ordered stacks that agglomerate into primary particles (PP). Here we show that the PAH composition of soot can be exactly determined and spatially resolved by low‐fluence laser desorption ionization, coupled with high‐resolution mass spectrometry imaging. This analysis revealed that PAHs of 239–838 Da, containing few oxygenated species, comprise the soot observed in an ethylene diffusion flame. As informed by chemical graph theory (CGT), the vast majority of species observed in the sampled particulate matter may be described as benzenoids, consisting of only fused 6‐membered rings. Within that limit, there is clear evidence for the presence of radical PAH in the particulate samples. Further, for benzenoid structures the observed empirical formulae limit the observed isomers to those which are nearly circular with high aromatic conjugation lengths for a given aromatic ring count. These results stand in contrast to recent reports that suggest higher aliphatic composition of primary particles.     

Development of an improved method for the determination of polycyclic aromatic hydrocarbons in mainstream tobacco smoke

A gas chromatograph/mass-selective detection (GC/MS) method has been developed and validated for the quantitation of 16 polycyclic aromatic hydrocarbons found in mainstream tobacco smoke condensate. The utilization of two types of solid-phase extraction media combined with capillary column technology removed matrix interferences, afforded a significant reduction in analysis run time, and increased accuracy. Also, the addition of a chilled impinger was used to trap semi-volatile polycyclic aromatic hydrocarbons and to provide more accurate data. This was done without sacrificing the repeatability, reproducibility, and precision obtained in previously published methods. The development and validation studies discussed in this paper resulted in an improved, robust analytical method capable of increasing laboratory capacity and reducing sample reporting time.     

分散液-液微萃取-高效液相色谱法测定环境水样中的多环芳烃

建立了简便、快速、有效的分散液-液微萃取-高效液相色谱-荧光检测(DLLME-HPLC-FLD)测定环境水样中15种多环芳烃(PAHs)的方法。重点探讨了萃取剂的种类和用量、分散剂的种类和用量以及萃取时间等对PAHs萃取效率的影响。在优化的条件下,评价了方法的可靠性。15种PAHs在0.01～10 μg/L范围内呈良好的线性关系,相关系数r均不小于0.9913,峰面积的相对标准偏差(RSD)在2.3%～4.7%之间(n=6)。在优化条件下,富集因子和萃取回收率良好,分别为674～1032和67.4%～103.2%,15种PAHs的检出限(S/N=3)在0.0003～0.002 μg/L之间。建立的方法应用于敖江水样中PAHs的检测,平均加标回收率在79.5%～92.3%之间,RSD在4.3%～6.7%范围内(n=5)。该方法适用于环境水样中痕量PAHs的分析。