AHP判断矩阵调整中的一致性问题研究

对判断矩阵的一致性调整进行研究,分析了次序一致性与满意一致性之间的关系,提出了一种基于次序一致性不变下的一致性调整方法,并证明了CR(A)的收敛性,算例说明了该方法的可行性。     

AHP一致性的概率检验法

Saaty的层次分析决策方法(AHP)是目前较为流行的多属性目标决策方法.AHP方法的一致性问题是其理论研究中心之一.通过Saaty的判断属性集合和一致性水平,很容易验证判断矩阵的一致性程度是否满足.但是对于Saaty的一致性水平,要求C.R≤0.1的内涵还需要进一步的揭示.研究Saaty的一致性原理,并给出检验矩阵一致性的概率方法,简称α一致性方法.     

次序一致性判断矩阵的相关理论及排序

给出了完全次序一致性的定义和次序一致性矩阵的标准形式,并证明了满意一致性与次序一致性的等价性,然后给出了同时适用于互反与互补两种判断矩阵的完全次序一致性检验及改进的交互式算法,最后在次序一致性的基础上给出了模糊互补判断矩阵排序的一种新方法,并给出了一个算例.     

互反判断矩阵一致性指标研究

首先给出了互反判断矩阵与一致性互反判断矩阵集之间距离的定义,基于此定义,提出了一个新的互反判断矩阵一致性指标,并给出了此一致性指标的度量方法。对于不满足此一致性指标的互反判断矩阵,提出了一个迭代算法来提高其一致性程度。得出了群体互反判断矩阵一致性指标的下界,为提出的一致性指标应用于群决策问题提供了理论基础。最后用数值例子说明了该迭代算法的可行性和有效性以及群决策中的相关结论。     

加型一致性毕达哥拉斯模糊偏好关系

在模糊偏好关系两种等价的加型一致性概念基础上,通过简单的数学证明,分析了区间值模糊偏好关系、直觉模糊偏好关系的相应的两种加型一致性并不是等价的.然后,在加型一致性直觉模糊偏好关系的启发下,构造了可以与毕达哥拉斯模糊偏好关系相互转换的两个区间值模糊偏好关系,并利用它们的加型一致性,定义了加型一致性毕达哥拉斯模糊偏好关系,并分析了其与杨艺等定义的加型一致性毕达哥拉斯模糊偏好关系的关系.其次,研究了加型一致性毕达哥拉斯模糊偏好关系的性质以及毕达哥拉斯模糊偏好关系的满意一致性,并给出满意一致性毕达哥拉斯模糊偏好关系下的方案优劣排序算法.最后,通过两个计算实例说明了排序算法可行有效.     

加权幂平均复合判断矩阵的群体AHP一致性研究

判断矩阵一致性是群体综合评价的重要内容。一致性可以反映专家群体就所有可能的替代方案达成完全一致的意见,利用一致性测度可以衡量评价者之间的差异,也是共识判断的基础。文章针对加权幂平均复合判断矩阵中存在的一致性问题进行研究,从幂平均次数对复合判断矩阵影响的角度,分析幂平均次数对一致性比率的影响程度,揭示两者之间的变化规律;研究专家判断矩阵的阶数对一致性比率的作用;从群体专家权重的角度,研究权重对复合判断矩阵一致性比率的敏感性。结果表明:(1)幂平均的次数会影响复合判断矩阵的一致性,幂平均的次数在有限区间内保证复合判断矩阵的满意一致性,有限区间长度同时依赖于判断矩阵的阶数与幂平均的次数,且一致性比率是关于幂平均次数的凹函数;(2)判断矩阵的阶数越高,专家给出判断矩阵的难度加大,然而随着判断矩阵阶数的升高,一致性比率会呈递减趋势;(3)专家的权数对于一致性比率影响较小,即专家权数的灵敏度较低,给定权数的扰动后不会影响复合判断矩阵的满意一致性。     

层次分析法一致性指标的临界值研究

层次分析法中一致性检验的显著性水平(即判断矩阵偏离一致性的程度)问题在已有研究文献中尚未得到很好的解决。论文在现有一致性指标CI基础上,从随机过程的视角,采用蒙特卡罗模拟法构造一致性指标的随机样本,根据样本确定了显著性水平为0.05和0.01情形下对应的一致性指标的临界值,为评价和调整判断矩阵提供了理论标准。同时,本研究能够确定判断矩阵偏离一致性的程度,并给出决策制定的显著性水平。     

不确定型模糊判断矩阵一致性逼近与权重计算的一种方法

西方根据模糊判断矩阵一致性的定义，提出了区间数模糊判断矩阵一致性逼近与排序的方法：该方法充分利用区间数模糊判断矩阵信息构造一致性模糊判断矩阵进行一致性逼近，基于误差传递理论计算排序权重区间，最后给出了一个算例。     

关于Fuzzy判断矩阵一致性的讨论

讨论Fuzzy判断矩阵的一致性问题.借助Zadeh的扩展原理,首先给出Fuzzy判断“近似相等”的概念,在此基础上,进一步定义Fuzzy判断矩阵的一致性,并研究Fuzzy判断矩阵一致性与普通判断矩阵一致性的关系,得到若干揭示两者关系的结果.     

基于乘型一致性的毕达哥拉斯模糊偏好关系

在乘型一致性区间值模糊偏好关系和乘型一致性直觉模糊偏好关系启发下,研究了乘型一致性毕达哥拉斯模糊偏好关系。首先,将毕达哥拉斯模糊偏好关系转化为两个等价的区间值模糊偏好关系,通过区间值模糊偏好关系的乘型一致性,定义了毕达哥拉斯模糊偏好关系的乘型一致性。其次,研究了乘型一致性毕达哥拉斯模糊偏好关系的若干性质。然后,研究了毕达哥拉斯模糊偏好关系的排序向量,以及求解乘型一致性和非乘型一致型毕达哥拉斯模糊偏好关系排序向量的方法。最后,通过实例说明了求解排序向量的方法是可行有效的。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

The Cauchy problem for ut=Δu+|∇u|

With q a positive real number, the nonlinear partial differential equation in the title of the paper arises in the study of the growth of surfaces. In that context it is known as the generalized deterministic KPZ equation. The paper is concerned with the initial-value problem for the equation under the assumption that the initial-data function is bounded and continuous. Results on the existence, uniqueness, and regularity of solutions are obtained.     

含有批处理机的三机流水作业加工总长问题在某些情形下的强NP困难性

本文研究含有批处理机的三台机器流水作业加工总长问题在某些情形下的计算复杂性。在批处理机上同时加工的工件组成一个工件批，一个工件批的所有工件同时开始、同时结束。当批处理机的容量有限时，我们证明了下列情形为强NP困难的：第一台机器是批处理机、其余两台机器是单机；第二台机器是单机、其余两台机器是批处理机；第三台机器是批处理机、其余两台机器是单机。     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

Dynamical Spin Susceptibility in the t–J Model in the Superconducting Phase

Dynamical spin susceptibility is calculated for the t–J model in the superconducting phase using the memory function method in terms of the Hubbard operators. The self-consistent system of equations for the memory function is obtained within the mode-coupling approximation. Both itinerant hole excitations and localized spin fluctuations contribute to the memory function. Moreover, the itinerant contribution itself consists of two parts, i.e., the contribution of Bogoliubov quasiparticles and that of Cooper pairs. The spin dynamics is diffusive in the hydrodynamic limit, but the itinerant part does not contribute to the spin diffusion. In the high frequency region, spin–wave-like excitations continue to exist. We discuss our analytic results in the light of neutron scattering experiments performed on the cuprate superconductors.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

基于VAR风险指标的投资组合模糊优化

在二目标有价证券选择基础上 ,引入目前流行的风险指标 VAR,以收益率与风险损失为目标 ,将模糊概念运用于有价证券组合选择 ,按投资者给定的期望目标及容差 ,讨论了 S型隶属函数模型 .通过 VAR的给定 ,将投资者所能承受的最大损失锁定 ,更好地反映出投资者对目标值的取值意图 .依据深圳股票市场9只股票收益率数据 ,采用进化规划进行优化计算 ,并验证模型的有效性 .     

Strategic defense and attack for series and parallel reliability systems

A system of independent components is defended by a strategic defender and attacked by a strategic attacker. The reliability of each component depends on how strongly it is defended and attacked, and on the intensity of the contest. In a series system, the attacker benefits from a substitution effect since attacker benefits flow from attacking any of the components, while the defender needs to defend all components. Even for a series system, when the attacker is sufficiently disadvantaged with high attack inefficiencies, and the intensity of the contest is sufficiently high, the defender earns maximum utility and the attacker earns zero utility. The results for the defender (attacker) in a parallel system are equivalent to the results for the attacker (defender) in a series system. Hence, the defender benefits from the substitution effect in parallel systems. With budget constraints the ratio of the investments for each component, and the contest success function for each component, are the same as without budget constraints when replacing the system values for the defender and attacker with their respective budget constraints.     

Evolution of non-spreading Airy wavepackets in time dependent linear potentials

We report on the use of the algebraic methods to obtain the explicit form of the solution of the Schrödinger equation with a linear potential. We consider the case of the explicitly time dependent Hamiltonian and formulate the general conditions that allow for the solutions to be found that are expressed in terms of Airy functions, yielding non spreading wave packets. The relevant physical meaning of these solutions is analyzed and the examples of their applications are given. The role, played by the Airy transform and its relevance to the problems, involving linear potentials is discussed. Eventually, we present a thorough discussion on the analogy between the Airy and the Gauss-Weierstrass transform, often employed in the solutions of the heat type equations.