高聚物热释电流的极化温度扫描法

本工作将热释蠕变(TSCr)的技巧应用于TSC,并作了一些简化,把聚甲基丙烯酸甲酯(PMMA)用通常TSC法得到宽TSC谱解析成许多单元松弛谱。由于利用改变极化温度区间的办法,将连续松弛谱解析为许多单元松弛谱,因此称为极化温度扫描法。     

聚合物薄膜玻璃化转变及其分子松弛行为的研究进展

随着纳米技术的发展,受限聚合物的玻璃化转变以及分子松弛行为受到了高分子物理学家的关注.由于纳米尺度效应,高分子薄膜的玻璃化转变以及分子松弛行为偏离于本体,呈现出尺寸依赖性.研究聚合物薄膜的玻璃化转变及其相关分子松弛行为对聚合物纳米材料的结构设计,进一步理解聚合物玻璃化转变的物理本质具有重要意义.本文总结了近20年来聚合物薄膜玻璃化转变行为的研究成果,介绍了薄膜分子松弛行为偏离本体的主要物理机制、聚合物薄膜分子运动能力的深度分布特征以及薄膜分子松弛行为的相关理论模型,并对该领域研究进行了展望.     

多组分聚合物体系的动态流变行为与其相行为的关系

对多组分聚合物体系相行为所采用的常规研究方法都存在不可避免的缺陷。而用动态流变学方法研究具有独特的优点,其理论依据是：对具有临界相行为(LCST、UCST)或微相分离行为的多组分聚合物体系,在小应变状态下的动态流变行为对体系在相分离过程中形态和结构的形成与演化极其敏感,非均相结构的产生使体系在长时松弛区域表现出与均相聚合物体系不同的粘弹松弛行为,即弹性显著增加、松弛时问明显增长以及时-温叠加原理失效,偏离经典的线性粘弹理论模型。本文综述了用Han曲线、Cole-Cole曲线、时-温叠加失效和G′-T曲线等动态流变学方法对多组分聚合物体系相行为的研究进展。     

星形聚苯乙烯的链缠结和松弛过程

本工作用应力松弛仪测定了一组等支链长不同支化度星形聚苯乙烯的松弛谱,探讨了支化结构对松弛谱橡胶平台区粘弹行为的影响,用“管子”模型对松弛谱进行了计算机模拟,从分子运动观点上解释了星形聚合物的粘弹特性:     

试样两端固定或松弛态结晶对取向非晶态聚对苯二甲酸乙二酯膜结晶的影响

<正> 在研究聚合物的结晶过程中,有时(如在同步辐射法、X-衍射法和红外法的测定中)须将试样两端固定,有时(如研究热处理过程中取向聚合物的尺寸和结构变化)须将试样处于松弛状态。因而研究两端固定或松弛状态对取向聚合物结晶速率和结构的影响引起了人们的兴趣。一些研究结果得出,与松弛状态结晶相比,试样两端固定态结晶使取向聚合物的结晶速率变慢,但有时也出现相反的结果。此外,在上述文献中所用的原始试样都已具有较高的结晶度。为了弄清这一问题,我们用密度、双折射和应力测量等方法对取向程度不同的非晶态PET膜进行了深入和系统的研究。结果表明,试样两端固定与否对结晶速率的影响与试样原始的取向程度有关。     

关于模拟聚合物非线性黏弹行为的四元件模型

聚合物黏弹行为可以用理想弹簧和理想黏壶以不同方式组合起来的力学模型模拟。其中四元件模型(Burgers-Frenkel模型)是能够全面呈现非线性黏弹行为的最简单的模型。然而,目前高分子物理教学中它只被用来描述蠕变现象。本文通过求解四元件模型的运动方程,得到该模型蠕变、应力松弛和动态力学行为的数学表达式,并形象地展示了四元件模型的蠕变和应力松弛过程。结果表明,广泛用于描述蠕变的四元件模型可很好地描述聚合物的应力松弛和动态力学行为。     

蓖麻油基AB交联聚合物的介电性质

在-180℃至140℃范围内,用几个频率测定了蓖麻油基AB交联聚合物的介电松弛谱。对这些聚合物的多重松弛和相行为的研究表明,试样中的两组份在介电松弛谱上显现出相容的或近似互容的特征。试样中的次级松弛归因于聚氨酯组份中链段的局部运动。提出了一个描述界面极化的方法,计算了界面极化松弛活化能,它们同试样中组份间的相容性,界面相互作用大小以及分子链的柔曲性有关。     

水、甲醇和乙醇溶剂在PVA膜材料中无限稀释扩散系数测定

用气相色谱法研究小分子溶剂与聚合物材料之间的相互作用是一种快速、准确和方便的方法,该方法可以测量多种小分子溶剂在聚合物中的溶解和扩散行为.采用该方法测定了水、甲醇、乙醇在固定液PVA中的保留时间和半峰宽,运用van Deemter模型进行数据处理,得到了上述几种小分子在PVA膜材料中的无限稀释扩散系数,获得了有意义的结果.     

分数Maxwell模型应用于PTFE松弛模量的研究

用分数Maxwell模型对聚合物PTFE(Polytetrafluoethylene)的应力松弛过程进行了研究. 分数Maxwell模型的渐近行为是确定其参数的基本依据, 但根据实验数据确定的松弛时间与渐近解成立的条件并不自恰. 通过适当选定松弛时间, 利用起始时段的实验数据确定初始松弛指数和松弛模量, 并适当优化末端松弛指数, 分数Maxwell模型可以对粘弹性应力松弛过程给出非常好的描述.     

填充聚合物的熔体流变学

颗粒填充聚合物（包括聚合物纳米复合材料）溶体通常表现出模量升高、频率依赖性的改变以及高含量填充体系的屈服行为等与单纯聚合物明显不同的流变行为,并且这些流变特性还会受到填料含量、形状尺寸以及颗粒-聚合物之间相互作用等诸多因素的影响。填充聚合物的宏观流变行为是与其微观结构的形成和演化以及高分子链在特定条件下的阻尼松弛过程密切联系在一起的。本文综述了颗粒填充聚合物（包括聚合物纳米复合材料）在力场作用下的流变性以及各种因素对其流变行为的影响,尤其是着重阐述了聚合物纳米复合材料的流变松弛机理和基于热力学理论建立起来的、描述填充体系熔体流变行为的Leonov模型。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.