Synthesis and characterization of indolocarbazole-quinoxalines with flat rigid structure for sensing fluoride and acetate anions

A new series of indolocarbazole-quinoxalines (ICQ, receptors 6 and 7) are prepared and characterized for effective fluoride and acetate anion sensing. The new indole-based system has a highly flat rigid structure with a large pi system, and exhibits high binding affinity and sensitivity for acetate and fluoride anions. Receptors 6 and 7 give abundant and unique spectral features in dimethyl sulfoxide (DMSO). Both fluoride and acetate anions cause a bathochromic shift of the absorption peaks of receptor 7 in DMSO, whereas only fluoride anion results in a remarkable shift of the absorption peak of receptor 6 in DMSO. Receptors 6 and 7 can also operate as efficient colorimetric sensors for naked-eye detection of fluoride and acetate anions, and their combined use also offers a simple way for distinguishing these two anions by the naked-eye. The analysis of a Job's plot for the binding of receptor 7 and F(-), single crystal structures of 7.TBACl and 7.TBACH(3)COO confirm 1:1 binding stoichiometry. Notably, the ICQ system offers novel and excellent receptors for acetate anion both in solution and in crystalline solid through the formation of two hydrogen bonds.     

Bile acid-based cyclic bisbenzimidazolium receptors for anion recognition: highly improved receptors for fluoride and chloride ions

The anion binding properties of bile acid-based cyclic bisbenzimidazolium receptors 6-8 bridged with m-xylene, p-xylene, and 2,6-dimethylpyridine have been studied. Receptors 6 and 7 exhibit much higher binding affinity for fluoride and chloride ions, respectively, as compared to the imidazolium receptors 1 and 2. Receptor 8, however, shows high selectivity but very low binding affinity for anions due to the presence of pyridyl nitrogen. The single-crystal X-ray structure of imidazolium receptor 10-(Br)2 containing pyridyl spacer reveals the binding pattern.     

Anion-binding properties of a cyclic pseudohexapeptide containing 1,5-disubstituted 1,2,3-triazole subunits

A C(3) symmetric cyclic pseudohexapeptide containing 2-aminopicoline-derived subunits and 1,5-disubstituted 1,2,3-triazole rings is introduced as a potent anion receptor. This macrocycle was designed to mimic both the conformation and the receptor properties of a previously described cyclic hexapeptide containing alternating L-proline and 6-aminopicolinic acid subunits. Conformational analyses demonstrate that the cyclic peptide and the cyclic pseudopeptide are structurally closely related. Most importantly, both exhibit a converging arrangement of the NH groups, hence a good preorganization for anion binding. As a consequence, the pseudopeptide also very efficiently interacts with halide and sulfate ions, and this is the case even in competitive aqueous solvent mixtures. However, there are clear differences in the structures of both compounds, which translate into characteristic differences in receptor properties. Specifically, (i) the pseudopeptide possesses an anion affinity intrinsically higher than that of the cyclopeptide, (ii) the pseudopeptide is well preorganized for anion binding in a wider range of solvents from aprotic to protic, (iii) anion affinity in aprotic solvents is very high and associated with complexation equilibria that are slow on the NMR time-scale, (iv) the propensity of the pseudopeptide to form sandwich-type 2:1 complexes with two receptor molecules surrounding one anion is significantly lower than that of the cyclopeptide. A solvent-dependent calorimetric characterization of the binding equilibria of both compounds provided clear evidence for the stabilizing effect of hydrophobic interactions between the receptor subunits in such 2:1 complexes. The pseudopeptide thus represents the first member of a new family of anion receptors whose properties may be fine-tuned by varying the side chains in the periphery of the cavity.     

Sulfonamide carbazole receptors for anion recognition

Carbazole-based receptors functionalized with two sulfonamide groups have been synthesized and their properties as anion receptors have been evaluated. The receptor with bis(trifluoromethyl)aniline groups has shown a very high affinity for halide ions, especially remarkable as only two hydrogen bonds are formed in the complexes. (1)H NMR and fluorescence titrations have been carried out and binding constants up to 7.9 × 10(6) M(-1) have been reached. X-ray structures have been obtained and a modelling study has shown the possible reasons for the large affinity of these compounds for halide anions.     

A quinoline based bis-urea receptor for anions: a selective receptor for hydrogen sulfate

A dipodal bis-urea receptor has been synthesized from the reaction of 8-amino quinoline and 1,4-phenylene diisocyanate in dichloromethane, and the anion binding ability of the receptor has been studied using fluoride, chloride, bromide, iodide, perchlorate, nitrate, dihydrogen phosphate and hydrogen sulfate by UV-Vis titrations in DMSO. The results show that the receptor binds each of the anions with a 1:1 stoichiometry, showing high affinity and moderate selectivity for hydrogen sulfate among the anions studied. Ab initio calculations based on density functional theory (DFT) suggest that an anion (X(-)) is bonded within the cleft formed by the two arms of the receptor through two NH...X(-) and two aromatic CH...X(-) interactions. The results from solution and theoretical studies suggest that binding is predominantly influenced by hydrogen bonding interactions and the basicity of anions.     

A New Anion Receptor with a Glycoluril Molecular Scaffold

The rational design and synthesis of a new anion receptor containing a glycoluril molecular scaffold are reported. This new receptor utilizes four amide hydrogen bonds arranged at the corner of the glycoluril unit. This new anion receptor binds spherically shaped halide ions in a 1:1 stoichiometry and has a high affinity for fluoride.     

Production of C6O6- from oligomerization of CO on molybdenum anions

C6O6- has been observed in mass spectra of the anionic reaction products between small molybdenum suboxide clusters and carbon monoxide. No other free oxocarbanions were observed, nor were any dianions. The anion photoelectron spectrum of C6O6- shows that the neutral has an adiabatic electron affinity of 2.54(5) eV and an excited triplet state with a term energy of 1.0(1) eV. Analysis of the mass spectra suggests that C6O6- may be forming from oligomerization of CO on bare or highly reduced molybdenum anion centers.     

A C3-symmetric colorimetric anion sensor bearing hydrazone groups as binding sites

Tris-hydrazone (1) functioned as a colorimetric chemosensor for a variety of anions such as F(-), AcO(-) and H(2)PO(4)(-). The anion binding could be easily detected by naked-eye according to color changes. The high binding ability of the receptor 1 to anions was further investigated by UV-vis absorption spectroscopy in DMSO. The results of job plot of the receptor 1 with different anions demonstrated that the stoichiometry of the complex between 1 and F(-) was 1:1 (1:anion) and the stoichiometry of the other complexes studied was 1:3 (1:anion).     

Bipyrrole- and dipyrromethane-based amido-imine hybrid macrocycles. New receptors for oxoanions

Three new amido-imine-type hybrid macrocycles based on substituted pyrrole units have been synthesized and shown to act as effective receptors for oxoanions in the solid state and in acetonitrile solution. One of the macrocycles in question, compound 15, was characterized by X-ray diffraction analysis as the free macrocycle and as a complex with sulfuric acid. A comparison of the resulting structures reveals that this receptor is capable of undergoing a conformational change and, as a consequence, varying the number of donor sites that can interact with a bound substrate. This system and the other two new receptors described in this work (macrocycles 14 and 16, respectively) display a high affinity toward oxoanions (studied as their tetrabutylammonium (TBA) salts), with association constants on the order of 10(7) M-1 being determined in acetonitrile solution using standard UV-vis spectroscopic titration methods. A competitive titration method was used to determine affinity constants in excess of ca. 10(6) M-1. Two of the receptors (14 and 15) were found to bind acetate, hydrogen sulfate, and dihydrogen phosphate anion well, and the bipyrrole-based receptor (14) was also found to bind the perrhenate anion. In contrast, the bis-dipyrromethane-derived receptor (16) was found to bind chloride anion preferentially. The unusual selectivity displayed by 16 for this spherical anion was rationalized on the basis of single-crystal X-ray diffraction data and DFT modeling calculations, which revealed a rigid structure appropriately suited for chloride anion recognition.     

Anion-selective interaction and colorimeter by an optical metalloreceptor based on ruthenium(II) 2,2'-biimidazole: hydrogen bonding and proton transfer

A new anion sensor [Ru(bpy)2(H2biim)](PF6)2 (1) (bpy = 2,2'-bipyridine and H2biim = 2,2'-biimidazole) has been developed, in which the Ru(II)-bpy moiety acts as a chromophore and the H2biim ligand as an anion receptor via hydrogen bonding. A systematic investigation shows that 1 is an eligible sensor for various anions. It donates protons for hydrogen bonding to Cl-, Br-, I-, NO3-, HSO4-, H2PO4-, and OAc- anions and further actualizes monoproton transfer to the OAc- anion, changing color from yellow to orange brown. The fluoride ion has a high affinity toward the N-H group of the H2biim ligand for proton transfer, rather than hydrogen bonding, because of the formation of the highly stable HF2- anion, resulting in stepwise deprotonation of the two N-H fragments. These processes are signaled by vivid color changes from yellow to orange brown and then to violet because of second-sphere donor-acceptor interactions between Ru(II)-H2biim and the anions. The significant color changes can be distinguished visually. The processes are not only determined by the basicity of anion but also by the strength of hydrogen bonding and the stability of the anion-receptor complexes. The design strategy and remarkable photophysical properties of sensor 1 help to extend the development of anion sensors.     

Imidazolium-based macrocycles as multisignaling chemosensors for anions

A series of structurally novel anion receptors , , and in which a ferrocene unit and a fluorescent moiety are linked to two imidazolium rings have been designed and prepared from 1,1'-bis(imidazolylmethyl)ferrocene. Their crystal structures revealed that these receptors are capable of incorporating anions such as PF(6)(-) and Br(-). Consequently, the anion binding studies were carried out using various techniques including electrochemistry (CV and OSWV), fluorescence, UV-vis, and (1)H NMR spectroscopy. All the receptors showed a special electrochemical response to the F(-) anion with a remarkable cathodic shift of more than 260 mV and displayed a unique selectivity for F(-) and AcO(-) anions with fluorescence enhancement over various other anions of present interest (Cl(-), Br(-), I(-), HSO(4)(-), H(2)PO(4)(-)). In addition, for receptor , obvious absorption changes were observed when the H(2)PO(4)(-) anion was added while other anions (F(-), Cl(-), Br(-), I(-), AcO(-), HSO(4)(-)) showed only a minor influence on the UV-vis spectra. (1)H NMR titrations demonstrated that receptors and can bind anions through (C-H)(+)X(-) hydrogen bonds and showed strong affinity and high selectivity for the AcO(-) anion in acetonitrile.     

Synthetic model of the phosphate binding protein: solid-state structure and solution-phase anion binding properties of a large oligopyrrolic macrocycle

The macrocyclic receptors 4-6 were synthesized via the anion-templated condensation of appropriately chosen dialdehyde and diamine building blocks. Whereas all three products could be obtained directly via the appropriate choice of reaction conditions, the larger [3+3] product, 6, which incorporates three of each precursor subunit, could also be obtained conveniently via an indirect procedure involving ring expansion of the smaller [2+2] macrocycle 4. As detailed earlier (Sessler, J. L.; Katayev, E. A.; Pantos, G. D.; Reshetova, M. D.; Khrustalev, V. N.; Lynch, V. M.; Ustynyuk, Y. A. Angew. Chem. 2005, 117, 7552-7556; Angew. Chem., Int. Ed. 2005, 44, 7386-7390), this ring expansion occurs under thermodynamic control in the presence of HSO4- and H2PO4- anions in acetonitrile solution and serves to effect the conversion of 4 to 6. An analysis of the X-ray crystal structure of complex 6H22+.HPO42- revealed a strong resemblance to the active site of the phosphate binding protein (PBP) with similar structural analogies being drawn between the active site of the sulfate binding protein (SBP) and the corresponding hydrogensulfate anion complex. In both cases, the anions are bound in a 1:1 fashion in the solid state through a complementary hydrogen bond network involving both the receptor 6 and the anions. UV-vis spectroscopic titrations provide support for the conclusion that macrocycle 6 binds the hydrogensulfate and dihydrogenphosphate anion (studied as the corresponding tetrabutylammonium salts) with high selectivity and affinity in acetonitrile (log Ka for the first binding interaction approaching 7), albeit with different receptor-to-anion binding stoichiometries (1:1 vs 1:3 for HSO4- and H2PO4-, respectively).     

Pyridinium/urea-based anion receptor: methine formation in the presence of basic anions

The influence of the positively charged N-methylpyridinium substituent on the anion binding tendencies of urea-based receptors has been investigated by comparing molecules 1 and 2. These receptors have been studied in acetonitrile, by performing UV-vis. and (1)H NMR titrations with several anions. UV-vis. titrations have also been performed in DMSO, MeOH and CHCl(3)/CH(3)CN mixture (1/1, v/v). In the case of 1, the presence of both H-donor and H-acceptor groups (urea and pyridine, respectively) favours aggregation and the formation of dimers in the solid state. In solution, this tendency to aggregate reduces affinity for anions with respect to the similar urea-based receptor 3. The methylation of the pyridyl group of 1 leads to the pyridinium-containing receptor 2. The pyridinium positive charge enhances the acidity of urea and increases anion affinity, as evidenced by the comparison of the binding constants. Both receptors (1-2) form stable adducts with all investigated anions. However, in the case of 2, the formation of 1?:?1 adducts with basic anions, such as acetate and fluoride, is followed by a proton transfer process. Quite interestingly, deprotonation does not involve the urea group, thus preserving the 1?:?1 adduct, as demonstrated by the (1)H NMR measurements. In particular, the proton transfer process takes place at the methylene group linking the pyridinium fragment to the receptor's skeleton. (1)H NMR studies indicate the formation of a stable neutral methine species, characterised by the loss of aromaticity by the pyridyl ring. These results open new perspectives in the field of anion recognition, as receptor 2 may by applied to the monitoring of both bound anion (through the urea unit) and excess anion in solution (through the development of the yellow methine species).     

Selective anion sensing by a tris-amide CTV derivative: 1H NMR titration, self-assembled monolayers, and impedance spectroscopy

A hydrogen-bond forming tris(amide) receptor based on cyclotriveratrylene (CTV) was prepared. Self-assembled monolayers (SAMs) of the receptor were formed on gold surfaces. Desorption experiments show a surface coverage of 2.26 x 10(-10) mol/cm(2). (1)H NMR and UV measurements confirm that the receptor exhibits the highest affinity for acetate ions among the anions studied. Electrochemical impedance was used to investigate anion sensing by the SAMs and proved to be an efficient and convenient technique for detecting anions in aqueous solutions. Upon binding acetate anions, the monolayer-modified gold electrodes show a drastic increase of the R(ct) values when Fe(CN)(6)(3-/4-) is used as the redox probe. When the probe was changed to a positively charged one, Ru(NH3)(6)(3+/2+), the R(ct) values decreased monotonically as the acetate concentration was increased, thus confirming the accumulation of negative surface charge upon anion binding. H(2)PO(4-) shows some interference when sensing AcO-. Other monovalent anions such as Cl-, Br-, NO3(-) and HSO4(-) do not bind to the CTV receptor either in solution or on the surfaces.     

Synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane, and 2-(pyridin-3-yl)-1-azabicyclo[3.2.1]octane, a class of potent nicotinic acetylcholine receptor-ligands

In an attempt to generate nicotinic acetylcholine receptor (nAChR) ligands selective for the alpha4beta2 and alpha7 subtype receptors we designed and synthesized constrained versions of anabasine, a naturally occurring nAChR ligand. 2-(Pyridin-3-yl)-1-azabicyclo[2.2.2]octane, 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, and several of their derivatives have been synthesized in both an enantioselective and a racemic manner utilizing the same basic synthetic approach. For the racemic synthesis, alkylation of N-(diphenylmethylene)-1-(pyridin-3-yl)methanamine with the appropriate bromoalkyltetrahydropyran gave intermediates which were readily elaborated into 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane and 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via a ring opening/aminocyclization sequence. An alternate synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via the alkylation of N-(1-(pyridin-3-ylethylidene)propan-2-amine has also been achieved. The enantioselective syntheses followed the same general scheme, but utilized imines derived from (+)- and (-)-2-hydroxy-3-pinanone. Chiral HPLC shows that the desired compounds were synthesized in >99.5% ee. X-ray crystallography was subsequently used to unambiguously characterize these stereochemically pure nAChR ligands. All compounds synthesized exhibited high affinity for the alpha4beta2 nAChR subtype ( K i < or = 0.5-15 nM), a subset bound with high affinity for the alpha7 receptor subtype ( K i < or = 110 nM), selectivity over the alpha3beta4 (ganglion) receptor subtype was seen within the 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane series and for the muscle (alpha1betagammadelta) subtype in the 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane series.     

Thermochemical studies of benzoylnitrene radical anion: the N-H bond dissociation energy in benzamide in the gas phase

The thermochemical properties of benzoylnitrene radical anion, C6H5CON-, were determined by using a combination of energy-resolved collision-induced dissociation (CID) and proton affinity bracketing. Benzoylnitrene radical anion dissociates upon CID to give NCO- and phenyl radical with a dissociation enthalpy of 0.85 +/- 0.09 eV, which is used to derive an enthalpy of formation of 33 +/- 9 kJ/mol for the nitrene radical anion. Bracketing studies with the anion indicate a proton affinity of 1453 +/- 10 kJ/mol, indicating that the acidity of benzamidyl radical, C6H5CONH, is between those of benzamide and benzoic acid. Combining the measurements gives an enthalpy of formation for benzamidyl radical of 110 +/- 14 kJ/mol and a homolytic N-H bond dissociation energy in benzamide of 429 +/- 14 kJ/mol. Additional thermochemical properties obtained include the electron affinity of benzamidyl radical, the hydrogen atom affinity of benzoylnitrene radical anion, and the oxygen anion affinity of benzonitrile.     

Buried solvent determines both anion-binding selectivity and binding stoichiometry with hydrogen-bonding receptors

[reaction: see text] The crystal structure of a tetraurea picket porphyrin-chloride anion complex has previously shown the anion to be situated between two adjacent ureas and hydrogen bonded via four NH protons (J. Am. Chem. Soc. 1998, 120, 11684-11692). The porphyrin receptor also binds a DMSO molecule and utilizes it as a participant in its anion recognition unit, in a manner similar to enzymes that bind water for use as part of their substrate recognition unit. The bound solvent molecule determines the anion-binding affinity, selectivity, and stoichiometry of binding. With a bound DMSO molecule, the tetraurea picket porphyrin is a highly selective receptor for chloride anion and binds all anions with a 1:1 binding stoichiometry. Absent the buried DMSO molecule, the receptor is selective for phosphate anion and binds chloride and phosphate anions with both 1:1 and 1:2 receptor-anion stoichiometries. Additionally, a remarkable reversal in the selectivity of anion complexation between various picket porphyrin receptors is observed, wherein the binding constant ratios change over 3 orders of magnitude as the receptor's number of urea pickets change from four to two. The latter receptor has no urea pickets available to bind to solvent after complexation with an anion. The results demonstrate that anion complexation with hydrogen-bonding receptors in a competitive solvent is enhanced when a ubiquitous solvent molecule is incorporated into the binding motif. In this way, competitive solvent adds to the overall complexation energy and thereby strengthens binding rather than weakens it, as commonly believed. The results are pertinent to drug design, for they suggest that pharmaceuticals need not be completely desolvated to selectively bind to their biological target when water can be included in the binding motif.     

CCR5 antagonists: 3-(pyrrolidin-1-yl)propionic acid analogues with potent anti-HIV activity

[reaction: see text] A novel approach to alpha,alpha-disubstituted-beta-amino acids (beta(2,2)-amino acids) was employed in the synthesis of a series of 3-(pyrrolidin-1-yl)propionic acids possessing high affinity for the CCR5 receptor and potent anti-HIV activity. The rat pharmacokinetics for these new analogues featured higher bioavailabilities and lower rates of clearance as compared to cyclopentane 1.     

Microsolvation of the dicyanamide anion: [N(CN)(2)(-)](H(2)O)n (n = 0-12)

Photoelectron spectroscopy is combined with ab initio calculations to study the microsolvation of the dicyanamide anion, N(CN)(2)(-). Photoelectron spectra of [N(CN)(2)(-)](H2O)n (n = 0-12) have been measured at room temperature and also at low temperature for n = 0-4. Vibrationally resolved photoelectron spectra are obtained for N(CN)(2)(-), allowing the electron affinity of the N(CN)2 radical to be determined accurately as 4.135 +/- 0.010 eV. The electron binding energies and the spectral width of the hydrated clusters are observed to increase with the number of water molecules. The first five waters are observed to provide significant stabilization to the solute, whereas the stabilization becomes weaker for n > 5. The spectral width, which carries information about the solvent reorganization upon electron detachment in [N(CN)(2)(-)](H2O)n, levels off for n > 6. Theoretical calculations reveal several close-lying isomers for n = 1 and 2 due to the fact that the N(CN)(2)(-) anion possesses three almost equivalent hydration sites. In all the hydrated clusters, the most stable structures consist of a water cluster solvating one end of the N(CN)(2)(-) anion.     

Interconversion of 3-Acylaminobenzisoxazoles and 3-(2-Hydroxyphenyl)-1,2,4-oxadiazoles

Interconversion of 3-(2-hydroxyphenyl)-1,2,4-oxadiazoles (1) and 3-acylaminobenzisoxazoles (2) was observed in the presence of base carboxylate anion, triethylamine, alkali hydroxide, alcoholate. With proton transferring reagents (carboxylate, triethylamine) the equilibrium 1?2 is dependent on the substituent R; with anionic reagents (hydroxy anion, ethoxyl anion) the less basic anion of 1 is preferred. Alcohol effects further transformation of this anion and the alcohol adduct anion (6) is subject both to hydrolysis and alcoholysis (7) to yield 3-amino-benzisoxazole (3).