Synthesis of 3-Aryl-1,3,5-pentanetricarboxylic acid trialkylesters <Emphasis Type="Italic">via</Emphasis> a Tandem Addition-Rearrangement-Addition Reaction

Summary.  In the presence of anhydrous potassium carbonate as base, triethylbenzylammonium chloride as phase transfer catalyst, and dimethylformamide as solvent, 4-nitrophenylsulfonylacetate was treated with alkyl acrylate at 70°C to afford the unexpected 3-aryl-1,3,5-pentanetricarboxylic acid trialkylesters via a tandem addition-rearrangement-addition reaction. A possible mechanism was suggested. Corresponding author. E-mail: scao@263.net Received September 2, 2002; accepted September 13, 2002     

Study on the cluster of floating dross before nucleating during hot-dipping process

At present, hot-dipping anticorrosion metalliccoating on the surface of steel base is the main methodto prevent atmospheric corrosion of steel. With thechange of atmospheric environment, the traditionalidea of hot-dipping pure Zn cladding already does not…     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Carboxamides of Dihydropyridin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones

Summary. 3-Carboxamides and 3-carboxanilides of 6-alkyl and 6-aryldihydropyridin-2(1H)-ones have been prepared via different reaction pathways. All synthesized amides show hydrogen bonds in their NMR spectra. The 4-hydroxy compounds were obtained as a mixture of tautomers. Their configurations were elucidated by NMR experiments.Received December 16, 2002; accepted December 20, 2002 Published online June 2, 2003     

Die Kristallstrukturen von Me3SiI · β-Picolin und Me3SiI · γ-Picolin Vergleich der Lewis-Basen Pyridin, β-Picolin und γ-Picolin

The Crystal Structure of Me₃SiI · β-Picoline and Me₃SiI · γ-Picoline A Comparison between the Lewis-Bases Pyridine, β-Picoline, and γ-Picoline The reaction of Iodinetrimethylsilane with β- und γ-Picoline (Pic) leads to solid 1 : 1 compounds Me₃SiI · β-Picoline 1 , Me₃SiI · γ-Picoline 2. The reaction was performed at room temperature. Yellow single crystals were obtained by sublimation. Single crystal X-ray investigations confirm that both compounds are ionic [Me₃SiPic]⁺I^?. The comparison of β-Picoline with γ-Picoline and Pyridine (Py) demonstrates that the presence of a methyl group and also its position has no significant influence on the Si? N bond length in compound 1, 2 and on the adduct Me₃SiI · Py.     

Reaktionen von 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ5, 3 λ5‐diphosphet mit 5‐Cyano‐1‐pentin und mit 2‐(Cyanmethyl)‐1‐methylpyrrol

Diphosphabenzenes. VII. Reactions of 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ⁵, 3 λ⁵‐diphosphete with 5‐Cyano‐1‐pentine and 2‐(Cyanomethyl)‐1‐methylpyrrol 5‐Cyano‐1‐pentine reacts with the equimolar amount of the λ⁵‐diphosphete 1 to give the λ⁵‐diphosphinine (λ⁵‐diphosphabenzene) ( 3 ), while reaction with the double equimolar amount of 1 yields the λ⁵‐diphosphinine ( 4 ). The acyclic compount 6 is the main product of the reaction between 1 and 2‐(cyanomethyl)‐1‐methylpyrrol, 5 . Melting points of 4 · CH₃CN and 6 , and mass, nmr and ir spectra of 3 , 4 , and 6 are reported. The crystal structure of 4 · CH₃CN shows an open‐chain ylidic CPCP‐sequence, which is linked to a λ⁵‐diphosphinine via an ethylene bridge. The X‐ray structure analysis of 6 confirms the existence as an acyclic conjugated double ylid.     

Structural,Vibrational, and Gasochromic Properties of Porous WO<Subscript>3</Subscript> Films Templated with a Sol-Gel Organic–Inorganic Hybrid

Summary.  The structure and the gasochromic properties of sol-gel-derived WO₃ films with a monoclinic structure (m-WO₃) were studied by focusing attention on the size of the monoclinic grains. The size of the m-WO₃ grains is modified by the addition of an organic–inorganic hybrid to the initial peroxopolytungstic acid (W-PTA) sols which are based on chemically bonded poly-(propylene glycol) to triethoxysilane end-capping groups (ICS-PPG). The results obtained with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that the heat treatment (500°C) of WO₃/ICS-PPG (0.5, 1, 2, 5, and 10 mol%) composite films results in a change of their morphology, and nanodimensional pores are formed between the grains. High-resolution TEM (HRTEM) analysis revealed the presence of an amorphous phase on the outside of the m-WO₃ grains, whereas energy-dispersive X-ray spectra (EDXS) showed that this amorphous phase contained W and Si. Impregnation of the WO₃/ICS-PPG film with H₂PtCl₆/i-propanol solution followed by heat treatment at 380°C gave the films their gasochromic properties. Infrared and Raman spectroscopic studies of the WO₃/ICS-PPG film confirmed the results of the corresponding HRTEM and EDXS analysis. In situ UV/Vis and in situ IR spectra of the films were measured in hydrogen and in air, and colouring/bleaching changes and the corresponding kinetics were assessed. The IR spectra of gasochromically coloured films showed that the mesoporous WO₃/ICS-PPG (1 mol%) film transforms to tetragonal H _x WO₃ bronze. The IR spectra of the H _x WO₃ bronze are discussed with the aim to establish the existence of the metal-OH vibrations of gasochromically formed oxyhydroxide tungsten bronze. Received October 4, 2001. Accepted (revised) November 19, 2001     

Partially Fluorinated Heterocycles from 4,4-Bis(trifluoromethyl)-hetero-1,3-dienes <Emphasis Type="Italic">via</Emphasis> C–F Bond Activation – Synthesis of 2-Fluoro-3-(trifluoromethyl)furans

Summary. An efficient synthesis of 2-fluoro-3-(trifluoromethyl)furans was developed. Keystep of the reaction sequence is a [4 + 1] cycloaddition reaction of tin(II)chloride to 4,4-bis(trifluoromethyl)-1-oxabuta-1,3-dienes. At elevated temperatures the tin heterocycles are transformed into 1-aryl-4,4-difluoro-3-(trifluoromethyl)but-3-en-1-ones which on treatment with sodium hydride in dry DMF give 2-fluoro-3-(trifluoromethyl)furans. The single fluorine bound to C-(2) can be readily replaced by various N-, O-, S-, and C-nucleophiles and dinucleophiles.     

Efficient synthesis of 3-cyanovinylcarbazole-1′-β-deoxyriboside-5′-triphosphate: a reversible photo-cross-linking probe

We describe an efficient synthesis of 3-cyanovinylcarbazole-1′-β-deoxyriboside-5′-triphosphate containing light-responsive artificial nucleobase 3-cyanovinylcarbazole, which can be used as a reversible photo-cross-linking probe with nucleic acid compounds for various biological applications. A three-step synthesis of 3-cyanovinylcarbazole-1′-β-deoxyriboside starting from 3-cyanovinylcarbazole, followed by ‘one-pot, three-step’ procedure is presented to accomplish the title compound 3-cyanovinylcarbazole-1′-β-deoxyriboside-5′-triphosphate in good yields.     

Comparative Studies on the Behavior of 3-Amino-2-phenyl-4(3<Emphasis Type="Italic">H</Emphasis>)-quinazolinone Towards Some Organophosphorus Reagents

Summary. The reaction of 3-amino-2-phenyl-4(3H)-quinazolinone with oxovinylidenetriphenylphosphorane afforded 5-phenylpyrazolo[1,5-c] quinazoline-2(3H)-one and triphenylphosphine oxide. On the other hand, when quinazolinone reacts with phosphorus ylides, the corresponding phosphorane adducts were obtained. Moreover, quinazolinone reacts with trisdialkylaminophosphines to give the new (dialkylamino)oxophosphonium dipolar products. Possible reaction mechanisms are considered and the structural assignments are based on analytical and spectroscopic results.     

A Metal‐free Approach to 3‐Aryl‐3‐hydroxy‐2‐oxindoles by Treatment of 3‐Acyloxy‐2‐oxindoles with Diaryliodonium Salts

A mild, metal‐free approach has been realized for the facile construction of highly valuable 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles. Direct arylations of 3‐acyloxy‐2‐oxindoles with diaryliodonium salts as arylation reagents are implemented in the presence of K₂CO₃ at room temperature without using an organometallic promoter to deliver an array of 3‐(hetero)aryl‐3‐hydroxy‐2‐oxindoles in good yields.     

Microstructure and Defect Characterization of Nanostructured Ni<Subscript>3</Subscript>Al

Summary.  Nanostructured Ni₃Al was produced by the inert gas condensation and in situ compaction technique and characterized by means of high-resolution transmission electron microscopy (HRTEM), X-ray diffraction, and density measurements. The defect structure was investigated using positron annihilation lifetime spectroscopy (PALS). It is shown that in some samples besides the cubic also the martensitic phase can be present. The defect structure can be divided into three major components: vacancy-like defects in the grain boundaries and nano-voids with a size of 1 nm as seen with PALS, and large pores with sizes up to 8 nm as seen with HRTEM. Furthermore, it is shown that an increasing compaction temperature leads to significantly smaller nano-voids. Received October 5, 2001. Accepted (revised) November 12, 2001     

One-Pot Three-Component Synthesis of 3-Aminoimidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]pyridines and -pyrazines in the Presence of Silica Sulfuric Acid

Summary. The synthesis of 3-aminoimidazo[1,2-a]pyridines and 3-aminoimidazo[1,2-a]pyrazines through a condensation reaction of 2-aminopyridine or 2-aminopyrazine, aldehyde, and alkyl or aryl isocyanide in high yields at room temperature in the presence of silica sulfuric acid is described.     

Palladium(II)‐Komplexe des 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ5‐[1,3,5]triphosphinins

Palladium(II) Complexes of 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinine 1,1,3,3,5,5‐Hexakis(dimethylamino)‐1λ⁵‐3λ⁵‐5λ⁵‐[1,3,5]triphosphinine ( 5 ) reacts with (benzonitrile)₂PdCl₂ to give the chelate complex dichloro(dodeca‐N‐methyl‐1λ⁵,3λ⁵,5λ⁵‐1,3,5‐triphosphinine‐1,1,3,3,5,5‐hexaamin‐C²,C⁴)palladium ( 6 ). In a pyridine‐d₅ solution of 6 the complex dichloro(dodeca‐N‐methyl‐1λ⁵,3λ⁵,5λ⁵‐1,3,5‐triphosphinine‐1,1,3,3,5,5‐hexaamin‐C²)((²H₅)pyridine‐N)palladium ( 7 ) is formed. The solute 7 could not be isolated as a solid, because elimination of the solvent regenerates 6 quantitatively. Properties, nmr and ir spectra of 6 and 7 are reported. 6 is characterized by the results of an X‐ray structural analysis.     

Syntheses of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3-styrylchromones

Several (E)- and (Z)-3-styrylchromones were prepared by two different methodologies, the Wittig reaction of chromone-3-carboxaldehyde with benzylic ylides and the Knoevenagel condensation of chromone-3-carboxaldehyde with phenylacetic acids in the presence of potassium tert-butoxide under microwave irradiation. The Knoevenagel reaction followed by a decarboxylation offered an efficient and diastereoselective method for preparing (E)-3-styrylchromones in a shorter reaction time. It was also demonstrated that phenylacetic acid can also be substituted with success by phenylmalonic acid. The stereochemistry of all products was assigned by NMR experiments. Correspondence: Artur M. S. Silva, Chemistry Department, University of Aveiro, 3810-193 Aveiro, Portugal.     

Poly[[bis(pyridin‐3‐ol)manganese(II)]‐di‐μ‐pyridin‐3‐olato]

In the title complex, [Mn(C₅H₄NO)₂(C₅H₅NO)₂]_n or [Mn(μ‐3‐PyO)₂(3‐PyOH)₂]_n (3‐PyO⁻ is the pyridin‐3‐olate anion and 3‐PyOH is pyridin‐3‐ol), the Mn^II atom lies on an inversion centre and has octahedral geometry, defined by two N atoms and two deprotonated exocyclic O atoms of symmetry‐related pyridin‐3‐olate ligands [Mn—N = 2.3559 (14) Å and Mn—O = 2.1703 (11) Å], as well as two N atoms of terminal 3‐PyOH ligands [Mn—N = 2.3482 (13) Å]. The Mn^II atoms are bridged by the deprotonated pyridin‐3‐olate anion into a layer structure, generating sheets in the (01) plane. These sheets are linked by O—H⋯O hydrogen bonds. There are also π–π and C—H⋯π interactions in the crystal structure.     

Ionic Liquid Promoted One-Pot Three-Component Reaction: Synthesis of Annulated Imidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]azines Using Trimethylsilylcyanide

Summary. Imidazo[1,2-a]azine derivatives are synthesized by a one-pot three-component reaction of an 2-aminoazine, an aldehyde, and trimethylsilylcyanide in the presence of 1-n-butyl-3-methylimidazolium bromide as a recoverable ionic liquid, in moderate to excellent yields with relatively short reaction times.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

γ-Fe2O3纳米纤维的丙酮敏感特性

采用静电纺丝法制备了PVP/FeC₆H₅O₇复合纳米纤维, 并将复合纤维在500 ℃高温烧结3 h, X射线衍射分析(XRD)表明, 烧结后的产物为正尖晶石结构的γ-Fe₂O₃晶体. 扫描电子显微镜(SEM)观测结果表明, 制得了直径均匀、 连续的复合纳米纤维, 其平均直径约为1000 nm; 烧结后的γ-Fe₂O₃纳米纤维保持了其连续性, 但纤维发生了收缩, 直径较烧结前小, 平均约为600 nm. 比表面积分析表明, γ-Fe₂O₃纳米纤维比表面积为57.18 m²/g. 气敏性能测试结果表明, 230 ℃为γ-Fe₂O₃纳米纤维检测丙酮气体的最佳工作温度. 在此温度下, γ-Fe₂O₃纳米纤维对丙酮气体表现出高响应度[S=6.9, c(Acetone)=7.88×10⁴ mg/m³]和线性度(7.88×10²~1.58×10⁵ mg/m³浓度范围内). 同时, γ-Fe₂O₃纳米纤维气体传感器件还表现出良好的长期稳定性.     

Synthesis and Characterization of Enantiomerically Pure cis‐ and trans‐3‐Fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐Oxides as γ‐Homoacetylcholine Mimetics and Inhibitors of Acetylcholinesterase

The title compounds, the P(3)‐axially and P(3)‐equatorially substituted cis‐ and trans‐configured 8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐oxides (=8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphabicyclo[4.4.0]decane 3‐oxides=2‐fluorohexahydro‐6‐(phenylmethyl)‐4H‐1,3,2‐dioxaphosphorino[5,4‐c]pyridine 2‐oxides) were prepared (ee>98%) and fully characterized (Schemes 2 and 3). The absolute configurations were established from that of their precursors, the enantiomerically pure cis‐ and trans‐1‐benzyl‐4‐hydroxypiperidine‐3‐methanols which were unambiguously assigned. Being configuratively fixed and conformationally constrained phosphorus analogues of acetyl γ‐homocholine (=3‐(acetyloxy)‐N,N,N‐trimethylpropan‐1‐aminium), they are suitable probes for the investigation of molecular interactions with acetylcholinesterase. As determined by kinetic methods, all of the compounds are weak inhibitors of the enzyme.