药对白术-茅苍术及其单味药中挥发油成分的比较分析

采用水蒸气蒸馏法提取单味药白术、茅苍术及其药对中挥发油成分,通过气-质联用技术(GC-MS)对其分离检测,利用直观推导式演进特征投影法(HELP)分辨解析重叠色谱峰,并结合程序升温保留指数辅助定性.从白术、茅苍术及其药对中依次鉴定出29,50,62个组分,分别占各自挥发油总量的95.93%, 97 44%, 97.47%;其中20种挥发油成分共存于单味药与药对中,主要是2-(2-甲氧基)苯甲氧基苯酚、γ-芹子烯、雅槛蓝树油烯、大根香叶烯B等.组成药对后,白术减少8种组分,茅苍术减少12种组分,而药对新增22种组分,主要是单萜烯类的低沸点化合物,新增组分在药对中的作用不容忽视.     

中药材中挥发油化学成分的气相色谱-质谱研究

采用水蒸汽蒸馏法从野马追花蕾中提取挥发油,用气相色谱-质谱(GC-MS)法对其化学成分进行鉴定。实验结果显示,100 g野马追花蕾中挥发油提取量为0.8 mL,可分离出49个色谱峰,对其中所含的18个组分给出了参考鉴定,约占挥发油总成分的56.34%。本法简单、快速、重现性好,适用于中药挥发油的化学成分分析。     

粉苞苣挥发油化学成分的GC-MS测定分析

利用气相色谱 质谱联用技术对粉苞苣的挥发油成分进行分析测定.从这种植物挥发油的45个峰中鉴定出27个化合物,所鉴定的组分占挥发油色谱总峰面积的77.25%.     

白千层挥发油化学成分分析

用毛细管气相色谱、气相色谱－ 质谱－ 计算机分析技术, 对植物白千层枝叶挥发油化学成分进行了分析研究, 从这种植物挥发油中分离出８０ 个以上的组分, 确认了其中的３５ 种成分, 所鉴定的组分占挥发油色谱总峰面积的９０ ％ 以上。     

顶空固相微萃取-气相色谱-质谱法分析莪术的挥发油成分

采用顶空固相微萃取-气相色谱-质谱法分离和鉴定莪术挥发油成分,用归一化测定其相对含量。共分离出64个组分,鉴定出57种化合物,其含量占总挥发油组分峰面积98.02%。主要挥发成分及其含量为β-榄香稀(18.73%)、β-榄烯酮(11.03%)、莪术二酮(8.47%)、γ-榄香稀(6.79%)。     

顶空固相微萃取-气相色谱-质谱法用于白术中挥发性成分的分析

采用顶空固相微萃取-气相色谱-质谱法(HS-SPME-GC-MS)分离鉴定了白术中的挥发性成分,并与采用传统的水蒸气蒸馏法(SD)提取的挥发性成分进行了比较。实验中筛选了固相微萃取纤维头,优化了SPME的操作条件。样品在70 ℃下平衡30 min后,用65 μm聚二甲基硅氧烷-二乙烯基苯(PDMS-DVB)纤维头对白术样品顶空吸附30 min,于250 ℃下解吸4 min, 然后采用GC-MS对解吸物进行分离鉴定;采用HS-SPME-GC-MS鉴定出41种组分,占总峰面积的90.81%;采用SD-GC-MS鉴定出31个组分,占总峰面积的88.19%,且采用SD所提取的组分基本上都被固相微萃取所提取。结果表明, HS-SPME可取代耗时的SD用于白术中挥发性物质的提取。     

顶空-固相微萃取法与水蒸气蒸馏法提取沙棘挥发油组分的比较研究

优化了顶空-固相微萃取法(HS-SPME)提取沙棘挥发性成分的条件,并采用气相色谱-质谱联用技术(GC-MS)分别对HS-SPME法和水蒸气蒸馏法(SD)的提取物进行分析。结果显示,在萃取温度为70℃,萃取时间为50 min,解吸时间为7 min,平衡时间为20 min条件下,HS-SPME法鉴定出76种组分,占挥发性物质总量的90.19%,主要成分为酯类、醛类和酮类;而SD法提取物共鉴定出56种组分,占挥发性物质总量的91.98%,主要成分为酯类。2种方法共有组分为20种。两种方法提取的沙棘挥发油组分的种类及含量差异较大,HS-SPME法更适合沙棘挥发性组分的快速检测。     

超临界CO2流体萃取法与水蒸气蒸馏法提取荆芥穗挥发油化学成分的研究

采用超临界CO2萃取法(SFE)与水蒸气蒸馏法(SD)从荆芥穗中提取挥发油。采用SE-54毛细管柱进行分析,用气相色谱-质谱法对挥发油中各种化学成分进行鉴定,用归一化法测定各组分的含量。色谱条件:SE-54毛细管柱 (30 m×0.25 mm i.d.,0.25 μm),柱温50 ℃(3 min)5 ℃/min180 ℃(2 min)10 ℃/min260 ℃(50 min);分流进样,分流比1∶50;进样口温度280 ℃。在采用超临界CO2萃取法提取的挥发油中共鉴定出54种成分,其主要成分为长叶薄荷酮、薄荷酮、亚油酸氯化物等;在水蒸气蒸馏法提取的挥发油中共鉴定出39种成分,其主要成分为长叶薄荷酮、薄荷酮、柠檬烯等。超临界法较水蒸气法更加稳定可靠,重现性好,适用于中药挥发油的化学成分分析。     

沙枣花挥发油化学成分的研究

本文用自制的水蒸汽蒸馏－溶剂萃取装置从沙枣花鲜花中提取挥发油，测得其含量为0.1%,用毛细管气相色谱-质谱法对挥发油的化学成分进行了研究,色谱分离出85个组分,质谱鉴定了其中47个组分,主要组分为反式肉桂酸乙酯,占总色谱峰面积的78.88%,IR和NMR为主要成分的鉴定提供了佐证。     

GC-MS法分析康定鼠尾草花挥发油中的化学成分

用水蒸气蒸馏法从康定鼠尾草花中提取挥发油,并用气相色谱/质谱联用技术(GC-MS)对挥发油的化学成分进行分离鉴定,用气相色谱峰面积归一化法确定各组分的相对含量,结果从康定鼠尾草花挥发油中鉴定出89种化合物,占总挥发油量的95%以上,其中主要成分是二苯胺(21.528%)、芳樟醇(9.873%)、2-丙酮基-3-蒈烯(7.533%)、1,3,3-三甲基-2-丁酮-环己二烯(5.088%)。本文通过对康定鼠尾草花挥发油化学成分的研究,为鼠尾草资源的进一步开发利用提供实验依据。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.