用于苯选择加氢制环己烯的非晶态合金Ru-La-B/ZrO2催化剂的失活与再生

 研究了在中试装置上经长期运转后的非晶态合金Ru-La-B/ZrO2催化剂的失活原因与再生方法. 结果表明: 催化剂失活不是由微孔堵塞、比表面积减小、晶粒长大或催化剂中毒而引起的,而是由于在长期运转过程中催化剂吸附了反应浆液中的Zn2+ 和反应器壁引入的Fe2+ , 通过酸洗的方法可以使催化剂的活性和选择性基本恢复.     

Impact of ageing on the distribution of platinum group elements and catalyst poisoning elements in automobile catalysts

The distribution of platinum group elements (PGEs) and catalyst poisoning elements (Pb, Zn, P and S) on the surface of gasoline and diesel automobile catalysts was investigated within this study. Laser ablation–inductively coupled plasma mass spectrometry (LA–ICPMS) provides both the sensitivity and the spatial resolution required for the surface analysis of sectioned automobile catalysts, and scanning along channels reveals the distribution of longitudinal changes in PGE and catalyst poisoning elements. Changes in catalyst surface features were studied for fresh catalysts and after ageing of the catalyst up to 80 000 km for both types of catalysts studied. The PGEs in the gasoline catalyst were found to decrease at the front of the catalyst after ageing, whereas the diesel catalyst presented a more constant loss along the catalyst. The fraction of poisoning elements (Pb, P and Zn for the gasoline catalyst and P and Zn for the diesel catalyst) retained by the catalyst is distributed non‐uniformly over the length of the catalyst. This could indicate different ageing mechanisms for gasoline and diesel catalysts. Copyright © 2003 John Wiley & Sons, Ltd.     

聚烯烃催化剂的发展及我们的对策

评述了聚烯烃催化剂的几个重要发展阶段，讨论了Ziegler-Natta催化剂，茂金属催化剂及非茂有机金属催化剂的组成及特征，提出了我国在聚烯烃催化剂开发方面的对策。     

费托合成中Co/ZrO2/SiO2催化剂的失活行为

 采用等体积分步浸渍法制备了费托合成用Co/ZrO2/SiO2催化剂,并用XRD,TPR和N2-吸附等手段对催化剂进行了表征. 考察了催化剂在费托反应过程中的结构变化和失活行为. 结果表明,反应过程中硅酸钴物种的生成是催化剂失活的主要原因,且硅酸钴的生成与产物水的分压有关; 晶粒长大也可能是催化剂失活的原因之一.     

氯对钌基氨合成催化剂的影响

氯离子的脱除是制备高性能钌催化剂的一个重要步骤。本文综述了新型钌基氨合成催化剂制备过程中的脱氯环节。介绍了以RuCl₃·3H₂O作为活性前驱体的钌催化剂中氯离子的来源、氯在催化剂中的存在方式、它对催化剂的毒害作用以及去除氯离子的方法。     

Polymer-supported lewis acid catalysts. VII. Polystyrene-bonded Ti(IV) chloride catalysts

A polystyrene-bonded Ti(IV) chloride catalyst was synthesized by the reaction of a polystyryl lithium (catalyst I , PS—TiCl₂) or a polystyryl magnesium (catalyst II , PS-TiCl₃) combined with titanium tetrachloride. The catalyst produced is a polymeric organometallic compound containing 0.479 mmol Ti/g catalyst, 0.986 mmol Cl/g catalyst (catalyst I ) and 0.281 mmol Ti/g catalyst, 0.766 mmol Cl/g catalyst (catalyst II ), depending on the method of synthesis. Both catalysts showed very good stability and good catalytic activity in such organic reactions as esterification, acetalation, and ketal formation. They can be reused many times without losing its catalytic activity. © 1993 John Wiley & Sons, Inc.     

SiO2骨架支撑MoOx催化剂用于正庚烷异构化反应

 采用SEM，XRD，EDS及N2吸附－脱附方法研究了骨架型MoOx－SiO2催化剂和负载型MoOx／SiO2催化剂的物理化学结构，并在常压固定床流动反应器上考察了两种催化剂对正庚烷异构化反应的催化性能．结果表明，在MoOx－SiO2催化剂中，44．6％的SiO2即可起到很好的骨架支撑作用；MoOx晶相以足够大的空间区域聚集包裹在SiO2骨架中，形成类似MoOx催化剂的独特的中孔结构．与MoOx催化剂相比，MoOx－SiO2催化剂显著提高了机械强度，并维持了MoOx催化剂较高的活性和选择性．由于钼物种和载体之间的相互作用，负载型MoOx／SiO2催化剂表现出较低的比活性．脉冲注入H2S实验结果表明，MoOx－SiO2催化剂具有较好的抗硫性能．     

钯催化气相氧化羰基化合成碳酸二甲酯

通过催化剂反应性能和反应前后XPS谱图对比，分析了负载型钯催化剂在甲醇气相氧化羰基化合成碳酸二甲酯过程中的失活原因，研究了HCl在维持催化剂活性及失活催化剂再生中的作用．结果表明，氯离子的流失是负载型钯碳催化剂失活的主要原因．由于氯离子的流失，对于PdCl2／AC催化剂，钯很容易从二价变为零价：对于PdCl2-CuCl2／AC催化剂，CuCl2发生变化，失去使钯保持二价氯化物状态的功能．在反应过程中补充HCl可以延长催化剂的寿命，也可以利用HCl对失活催化剂进行再生，但采用HCl不能从根本上解决催化剂失活的问题．     

氮掺杂碳纳米管包覆碳化硅作为不含金属的催化剂(英文)

A hierarchical metal-free catalyst consisting of nitrogen-doped carbon nanotubes decorated onto a silicon carbide (N-CNTs/SiC) macroscopic host structure was prepared. The influence of N-CNTs incorporation on the physical properties of the support was evaluated using different characterization techniques. The catalyst was tested as a metal-free catalyst in the selective oxidation of H2S and steam-free dehydrogenation of ethylbenzene. The N-CNTs/SiC catalyst exhibited extremely good desulfurization performance compared to a Fe2O3/SiC catalyst under less conducive reaction conditions such as low temperature, high space velocity, and a low O2-to-H2S molar ratio. For the dehy-drogenation of ethylbenzene, a higher dehydrogenation activity was obtained with the N-CNTs/SiC catalyst compared to a commercial K-Fe/Al2O3 catalyst. The N-CNTs/SiC catalyst also displayed good stability as a function of time on stream for both reactions, which was attributed to the strong anchoring of the nitrogen dopant in the carbon matrix. The extrudate shape of the SiC support allowed the direct macroscopic shaping of the catalyst for use in a conventional fixed-bed reactor without the problems of catalyst handling, transportation, and pressure drop across the catalyst bed that are encountered with nanoscopic carbon-based catalysts.     

静电纺丝制备质子交换膜燃料电池催化剂层综述

质子交换膜燃料电池催化剂层在成本、耐久性以及性能上的局限是制约燃料电池汽车商业化的瓶颈. 已有文献证明静电纺丝技术制备的纳米纤维催化剂层能提高催化剂利用率、增加三相界面和三相通道以及提高耐久性. 作者结合所在课题组的工作综述了静电纺丝技术制备质子交换膜燃料电池催化剂层的研究进展. 首先,介绍了质子交换膜燃料电池催化剂层的发展历程,并从制备方式和结构两个方面对其进行分类和总结;接下来,从静电纺丝纳米纤维催化剂层的制备、物理特性表征、电化学性能分析及耐久性表征等方面进行了总结;最后,从三相界面、三相通道以及量产适用性的视点比较了三种结构的催化剂层,介绍了质子交换膜燃料电池催化剂层的发展趋势,并梳理了静电纺丝法制备质子交换膜燃料电池催化剂层领域待研的问题.     

用NH4F络合还原法制备的炭载Pd催化剂对甲酸分解的催化性能和甲酸氧化的电催化性能

直接甲酸燃料电池(DFAFC)的两大问题是炭载Pd(Pd/C)催化剂对甲酸氧化的电催化稳定性不好和Pd催化剂能催化甲酸分解。发现用NH4F络合还原法制备的NH4F修饰Pd/C催化剂对甲酸氧化的电催化活性要比Pd/C催化剂好大约20%,电催化稳定性也要稍优于Pd/C催化剂。在120 s内和30℃下,甲酸在Pd/C催化剂上分解产生38 mL气体,但在NH4F修饰Pd/C催化剂上基本上不分解,因此NH4F修饰主要能抑制Pd催化剂催化分解甲酸的能力,而且又能在一定程度上提高Pd/C催化剂对甲酸氧化的电催化性能。     

在超临界正己烷介质中的F-T合成反应行为

在固定床反应器中,以正己烷为超临界介质,研究了三种Co催化剂（浸渍、喷雾干燥、双模催化剂）上的F-T合成反应行为。在相同的Co质量分数下,喷雾干燥催化剂和双模催化剂的活性接近,都高于浸渍催化剂。在喷雾干燥催化剂上CO的转化率显著高于浸渍催化剂。喷雾干燥催化剂F-T产物中具有高的低碳选择性和低的1-烯烃质量分数,然而在相近的CO转化率下,喷雾干燥和浸渍催化剂具有类似的1-烯烃质量分数。对于浸渍催化剂,当Co质量分数从5％增加到15％,CO转化率从8.3％增加到43.6％。含Co5％的催化剂比质量分数为10％、15％、20％催化剂的甲烷选择性低2.0%～3.0%,但产物中1-烯烃的质量分数明显要高。     

Catalytic features of a low-temperature reduced alumina-supported platinum catalyst. Activity and selectivity in the liquid-phase hydrogenation of benzaldehyde and nitrobenzene

A low-temperature reduced (LR) supported platinum catalyst was used for the hydrogenation of benzaldehyde, nitrobenzene and their mixture in ethanol, and compared with a high-temperature reduced (HR) catalyst. For benzaldehyde the LR catalyst was highly active to the formation of benzyl alcohol and did not give benzaldehyde diethyl acetal, which was largely formed by the HR catalyst. For the mixture, benzylideneaniline was selectively produced by the LR catalyst, while the HR catalyst gave benzylaniline and the acetal.     

用于丁烷选择氧化制顺酐的铈锆复合钒磷氧催化剂的研究

 在钒磷氧（VPO）催化剂中添加适量铈锆复合氧化物，得到了一\r\n种新型的铈锆复合钒磷氧催化剂．该催化剂对丁烷选择性氧化制顺酐反\r\n应的催化性能比纯VPO催化剂有了显著提高．在丁烷／空气共进料反应\r\n条件下，其顺酐收率比纯VPO催化剂提高了一倍；在无氧反应条件下，\r\n其可参与选择性氧化制顺酐的晶格氧量为纯VPO催化剂的2．2倍．BET比\r\n表面积测试、X射线衍射、钒平均价态测定和程序升温实验等表征结果\r\n表明，混合在催化剂活性相中的少量铈锆复合氧化物参与了VPO体系的\r\n氧化还原过程，并起到了以下两方面的作用：（1）促进了（VO）2P2O\r\n7相的形成，稳定了钒的平均价态，有利于最终形成晶相结构良好和反\r\n应性能稳定的VPO催化剂；（2）显著提高了VPO催化剂的氧化还原性能\r\n，大大增加了催化剂的可逆储氧量．     

合成1,5-苯并二氮杂卓衍生物的催化剂研究进展

根据催化剂种类的不同,综述了近十年在1,5-苯并二氮杂(草)衍生物的合成过程中使用的催化剂的研究进展,包括路易斯酸、布朗斯特酸、有机酸、负载催化剂、离子液体催化剂、哌啶类催化剂、介孔材料等,分析了各方法的优缺点,期望能够为探索出更好的催化剂提供启发.     

Surprisingly efficient catalytic Cr-mediated coupling reactions

[reaction: see text] With use of 1 mol % of Cr catalyst 5, surprisingly efficient Cr-mediated couplings of aldehydes with various types of nucleophiles have been realized. The catalyst set of Cr catalyst 5 and Ni catalyst 4 is used for alkenylation, alkynylation, and arylation, whereas the catalyst set of Cr catalyst 5 and CoPc (cobalt phthalocyanine) is used for 2-haloallylation, alkylation, and propargylation. Only the Cr catalyst 5 is required for allylation. The reaction rates in DME and THF have been found significantly faster than that in MeCN.     

Dehalogenation of Aryl Halides Catalyzed by Montmorillonite Immobilized Bimetal Catalyst in Aqueous System

A novel bisupported bimetal catalyst PVP-PdCl2-FeSO4/Al-Mont-PEG600 was prepared by immobilization of PVP (poly (N-vinyl-2-pyrrolidone)) supported bimetallic catalyst using alumina pillared inartificial montmorillonite as the carrier. This catalyst has good dehalogenation activity and selectivity to aryl halides-o-chlorotoluene in aqueous system in the presence of phase transfer catalyst (PEG) and sodium formate as hydrogen source. The catalyst also shows good reusability.     

木质素负载钯催化剂的制备及对Heck反应的催化性能

以天然木质素和PdC l2为原料,合成了木质素负载钯催化剂,用IR、XPS、TG、DTA等对其进行了表征.研究表明,该催化剂在空气氛围中能催化丙烯酸与芳基碘的Heck反应,并有一定的重复使用性能.     

制备高碳醇用Cu-Zn-Zr催化剂的研究

研究了制备高碳醇用新的催化体系ＣｕＺｎＺｒ．ＣｕＺｎＺｒ催化剂可用Ｃｕ（ＮＯ３）２,Ｚｎ（ＮＯ３）２,ＺｒＯＣｌ２和Ｎａ２ＣＯ３为原料,采用并流共沉淀法制备．研究结果表明,ＣｕＺｎＺｒ催化剂对脂肪酸甲酯加氢制备高碳脂肪醇具有很高的活性．催化剂的活性测定结果及ＸＲＤ和ＴＰＲ表征结果表明,Ｃｕ和Ｚｎ都是该催化剂的活性组分,Ｃｕ０和ＺｎＯ是其活性物相,Ｚｒ组分以ＺｒＯ物相存在,对活性组分起着间隔分散作用．用ＡＳＡＰ２０００型物理吸附仪测定了催化剂的比表面积、比孔容、孔结构和孔径分布,揭示了在不同条件下制备的ＣｕＺｎＺｒ催化剂活性差异的原因     

Numerical simulation of the ordered catalyst layer in cathode of proton exchange membrane fuel cells

A steady-state, one-dimensional numerical model based on cylindrical electrode structure is presented to analyze the performance of the ordered cathode catalyst layer in Proton Exchange Membrane Fuel Cells. The model equations account for the Tafel kinetics of oxygen reduction reaction, proton migration, oxygen diffusion in the cylindrical electrolyte and the gas pores, oxygen distribution at the gas/electrolyte interface. The simulation results reveal that ordered catalyst layers have better performance than conventional catalyst layers due to the improvements of mass transport and the uniformity of the electrochemical reaction rate across the whole width of the catalyst layer. The influences of oxygen diffusivity in gas phase and electrolyte, and the proton conductivity have been shown. The limitation by oxygen diffusion in gas phase drives the active region of the catalyst layer to the catalyst layer/gas diffuser interface. The limitation by proton migration confines the active region of the catalyst layer to the membrane/catalyst layer interface. The limitation due to oxygen diffusion in electrolyte film maintains the uniform distribution of the active region throughout the ordered catalyst layer.