核酸适配体识别-荧光法检测赭曲霉素A

建立了核酸适配体识别-荧光探针技术检测赭曲霉素A(OTA)的新方法.基于微孔板上固定的核酸适配子与目标物质OTA结合时构象发生变化,导致预先与其互补杂交的FAM标记短链DNA解离,引起荧光信号发生变化,据此可实现对OTA的定量检测.当微孔板包被亲和素浓度为25 mg/L、适配子浓度为50 nmol/L,FAM标记互补短...     

基于核酸适配子识别的荧光法检测可卡因

基于荧光标记和核酸适配子识别可卡因,建立了简单、灵敏的可卡因新型荧光分析法.在微孔板表面组装亲和素-生物素化可卡因适配子-FAM标记可卡因适配子互补短链复合物,根据加入可卡因前后荧光强度的变化来定量可卡因.实验考察了微孔板包被亲和素浓度、生物素标记适配子用量、FAM标记可卡因适配子互补短链用量、反应温度、反应时间等因素...     

用于免疫分析的聚苯乙烯微孔板功能化研究

为满足固相时间分辨荧光免疫分析研究需要,将聚苯乙烯微孔板内表面固相功能化,研制一种在聚苯乙烯微孔板内表面形成耐受强酸、强碱、有机溶剂的尼龙6膜层,并在膜层表面烷基化得到活性基团与己二酸二酰肼进行"手臂"连接,用双功能团戊二醛活化.检测结果表明,经修饰的聚苯乙烯微孔板化学连接蛋白质结合率比物理吸附高出5～10倍,在-4℃环境中存放6个月活性降低小于15%.灵敏度和稳定性显著提高.     

基于核酸适配体-质粒DNA复合物信号放大的荧光免疫传感技术

提出了一种简便、高灵敏的荧光免疫传感新技术,通过抗体/抗原/核酸适配体-质粒DNA复合物的特异性识别与双链质粒DNA与荧光染料SYBR Green Ⅰ的嵌合作用, 实现对血小板衍生增长因子BB(PDGF-BB)的检测.生物识别反应在微孔板中进行,PDGF-BB抗原与微孔板底部预包被的PDGF-BB抗体免疫反应后,加入核酸适配体-质粒DNA复合物与抗原形成夹心复合物.加入DNA双链嵌合染料SYBR Green Ⅰ与夹心复合物的双链DNA部分结合可产生强荧光,其荧光强度可用于定量测定PDGF-BB浓度.实验考察了离子浓度、核酸适配体的延伸引物片段与质粒PUC19的反应比例、染料SYBR Green Ⅰ浓度等分析条件对荧光信号的影响.在优化反应条件下,PDGF-BB检测的线性范围为0.2～200 μg/L,检出限为0.1 μg/L,并且实现了对人血清中PDGF-BB的定量检测.     

板式磁颗粒化学发光免疫分析在癌胚抗原测定中的应用

开发了一种板式磁颗粒化学发光免疫分析方法并将其用于人血清中癌胚抗原(CEA)的测定,该方法利用HRP标记的CEA抗体以及FITC标记的CEA抗体与CEA抗原在微孔板中进行夹心反应,使用抗FITC抗体包被的磁性微粒子溶液作为分离固相,利用了一个特殊的适用于微孔板的磁性分离器进行分离,最后加入鲁米诺和H2O2底物进行发光反应.该方法采用微孔板代替透明管作为反应容器,磁颗粒作为分离固相在微孔里与免疫试剂反应,提前用BSA将微孔板封闭,很好地解决了管式磁颗粒方法非特异吸附高以及包被板方法线性范围小的局限性,同时避免了管间差异以及包被不均问题.该方法结合了微孔板作为反应容器以及磁颗粒分离体系的优点,使用夹心法对人血清中的CEA在0～250ng/mL浓度范围进行了测定,检测灵敏度为0.57ng/mL,批内和批间变异分别小于7%和11%.与市售CLIA试剂盒测定结果做了比对,两者显示了很好的相关性.该法经济、优越,有望实现商品化.     

毛细管电泳和微流控芯片中的发光二极管诱导荧光检测

发光二极管诱导荧光检测由于体积小、利于微型化、成本低、耗能少、寿命长、应用波长范围较宽等优点,已备受关注.该文主要介绍荧光检测中所使用的几种光学元件,及由这些光学元件所组成的3种荧光检测的光路结构和以发光二极管作为光源诱导荧光检测在毛细管电泳和微流控芯片中的应用研究.引用文献50篇.     

圆偏振热活化延迟荧光材料及其器件的研究进展

圆偏振热活化延迟荧光材料具有分子结构易修饰、激子利用率高及圆偏振发光等特点,在光学信息存储、3D显示、发光器件和数据加密等领域具有广阔应用前景.利用此类材料作为发光层制备的圆偏振有机发光二极管,能够同时实现高发光不对称因子和理论上达100%的激子利用率,对发展低功耗和高性能有机发光二极管至关重要.近年来,通过不断的分子结构设计与优化,该类材料在有机发光二极管中的电致发光效率不断提高,但是仍然存在不对称因子低及效率滚降严重等问题.基于此,整理了目前已报道的圆偏振热活化延迟荧光化合物,重点讨论了其分子结构设计与光物理性质、圆偏振特性以及电致发光性能的关系规律,并对高性能圆偏振热活化延迟荧光材料的制备及其在有机发光二极管中的应用进行了展望.     

微孔板蛋白芯片可视化检测方法的研究

将微孔板生物芯片制备技术与银增强显色方法相结合,建立了一种高通量蛋白免疫分析新方法。研究采用夹心法反应原理,将人IgG捕获抗体以微阵列形式点样于96孔板底部制备成蛋白微阵列,并依次与人IgG、生物素标记二抗及链亲和素胶体金反应,最后用银增强法显色。采用平板式扫描仪对微孔板显色结果进行快速扫描成像,图像采用luxscan 3.0软件处理。结果表明:微孔板蛋白芯片的最低检测量可达0.6 ng/mL,线性范围10 ng/mL~100μg/mL,相关系数为0.98,重复性较好(CV10%)。     

发红色荧光的类水滑石材料的制备及在LED中的应用

通过共沉淀法合成了发红色荧光的类水滑石材料,采用硅烷偶联剂对其进行了表面改性,并利用荧光光谱、红外光谱、X射线衍射(XRD)和扫描电子显微镜(SEM)等对其结构和性能进行了表征,探讨了表面改性对荧光类水滑石的影响.将改性荧光类水滑石与发射波长为384 nm的In Ga N芯片组合制成发光二极管,器件发出明亮的红光.研究结果表明,改性的发红色荧光的类水滑石是制作白光二极管可供选用的红色发光材料.     

高通量便携式荧光检测装置的研制与应用

基于一字线激光模组,设计并构建了高通量便携式荧光检测装置,因其无需传统微孔板荧光仪所要求的专业精密调节的复杂光路系统,具有结构简单、小巧轻便、成本低廉与多通道的特点。结合自行研制的图像处理软件,对96孔微孔板样品的检测与数据处理可在10 min内完成,实现了溶液的高通量定量检测。检测罗丹明B的灵敏度为(2.80±0.15)nmol/L。应用本装置检测水溶液中Hg2+,检出限为7.7μg/L;检测自来水样品中Hg2+的加标回收率为99.9%~102.4%,RSD为1.5%~2.6%;检测湖水样品中Hg2+的加标回收率为96.2%~98.9%,RSD为1.6%~2.5%。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

Continuous wave-based multiphoton excitation fluorescence for capillary electrophoresis

It was reported that a novel detection method, continuous wave (CW)-based multiphoton excitation (MPE) fluorescence detection with diode laser (DL), has been firstly proposed for capillary electrophoresis (CE). Special design of end-column detection configuration proved to be superior to on-column type, considering the detection sensitivity. Three different kinds of fluorescent tags that were widely used as molecular label in bio-analysis, such as small-molecule dye, fluorescent protein and nano particle or also referred to as quantum dot (QD), have been evaluated as samples for the constructed detection scheme. Quantitative analyses were also performed using rhodamine species as tests, which revealed dynamic linear range over two orders of magnitude, with detection limit down to zeptomole-level. Simultaneous detection of fluorescent dyestuffs with divergent excitation and emission wavelengths in a broad range showed advantage of this scheme over conventional laser-induced fluorescence (LIF) detection. Further investigations on CW-MPE fluorescence detection with diode laser for capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) separations of fluorescein isothiocyanate (FITC) labeled amino acids indicated good prospect of this detection approach in various micro or nano-column liquid phase separation technologies.     

Capillary Electrophoresis Based Immunoassay for Monoclonal Antibody with Diode Laser Induced Fluorescence Detection

ABSTRACT

A capillary electrophoresis based immunoassay (CEIA) for monoclonal antibody using diode laser induced fluorescence (LIF) detection was described. A direct assay for monoclonal anti-BSA in mouse serum was used as a model. BSA was labeled with Cy5 and used as the immunoreagent. The 635 nm line of a diode laser was used as the excitation source for LIF detection. The calibration curve for anti-BSA in mouse serum had a linear dynamic range of 4-40 nM. The concentration limit of detection (LOD) was 1.2 nM. Incubation time and CE conditions such as buffer concentration, pH and separation voltage were optimized, and the performances of different lasers as excitation sources were also compared.     

High-sensitivity, disposable lab-on-a-chip with thin-film organic electronics for fluorescence detection

We report a high-sensitivity, disposable lab-on-a-chip with a thin-film organic light-emitting diode (OLED) excitation source and an organic photodiode (OPD) detector for on-chip fluorescence analysis. A NPB/Alq3 thin-film green OLED with an active area of 0.1 cm(2) was used as the excitation source, while a CuPC/C(60) thin-film OPD with 0.6 cm(2) active area was used as a photodetector. A novel cost-effective, cross-polarization scheme was used to filter out excitation light from a fluorescent dye emission spectrum. The excitation light from the OLED was linearly polarized and used to illuminate a microfluidic device containing a 1 microL volume of dye dissolved in ethanol. The detector was shielded by a second polarizer, oriented orthogonally to the excitation light, thus reducing the photocurrent due to excitation light leakage on the detector by approximately 25 dB. The fluorescence emission light, which is randomly polarized, is only attenuated by approximately 3 dB. Fluorescence signals from Rhodamine 6G (peak emission wavelength of 570 nm) and fluorescein (peak emission wavelength of 494 nm) dyes were measured in a dilution series in the microfluidic device with emission signals detected by the OPD. A limit-of-detection of 100 nM was demonstrated for Rhodamine 6G, and 10 microM for fluorescein. This suggests that an integrated microfluidic device, with an organic photodiode and LED excitation source and integrated polarizers, can be fabricated to realize a compact and economical lab-on-a-chip for point-of-care fluorescence assays.     

Fluorescence emission of disperse Red 1 in solution at room temperature

In this article, we report the fluorescence emission of Disperse Red 1 in solution at room temperature and pumping at 532 nm with a 25 mW diode laser. We have measured its fluorescence quantum yield in methanol, ethylene glycol, glycerol, and phenol obtaining values as high as 10(-3) in the aliphatic alcohols. The excitation spectra of Disperse Red 1 in all four solvents as well as its excitation anisotropy in glycerol are presented. Applying a Gaussian decomposition method to the absorption spectra along with the support from the excitation spectra, the positions of the different transitions in this pseudo-stilbene azobenzene dye were determined. Solvatochromic and isomerization constraint effects are discussed. Calculations using density functional theory at TD-B3LYP/6-31G*//HF/6-31G* level were performed to interpret the experimental observations.     

A time-resolved near-infrared fluorescence assay for glucose: opportunities for trans-dermal sensing

We report a time-resolved near-infrared fluorescence assay for glucose detection that incorporates pulsed diode laser excitation. Reduction in fluorescence resonance energy transfer to a malachite green-Dextran complex from allophycocyanin bound to concanavalin A (ConA) due to displacement of the complex by glucose from ConA provides the basis of the assay. The fluorescence quenching kinetics are analysed and discussed in detail. The change in fluorescence decay kinetics in the presence of glucose is found from dimensionality studies to be brought about by a change in the distribution of malachite green-Dextran acceptors. Glucose concentrations are measured in solution to within +/- 10% over the range 0-30 mM.     

A miniaturized fluorescence detector with a windowless flow cell using a light-emitting diode.

A miniaturized fluorescence detector using a high-brightness light-emitting diode as an excitation source was constructed and evaluated. A windowless flow cell based on a commercial four-port cross fitting was designed to reduce the stray-light level and to eliminate the optical alignment. The observed detection limit for fluorescein was 26 nM in the continuous-flow mode. The error in the reproducibility of the responses was evaluated by the FIA method, and was found to be within 2% RSD.     

发光二极管诱导荧光用于毛细管电泳检测

利用发光二极管作为激发光源，组装了用于毛细管电泳的荧光检测器。光纤用于传输荧光信号；光纤端面修饰成球形使耦合效率比平面端光纤提高了50．8％；光阑、光纤及毛细管检测池之间的光学校准简单、便捷。荧光素染料用于评价该体系性能，得到了fmol的质量检出限。     

A simple and compact blue diode laser powered excitation source for fluorescence detection in capillary electrochromatographic microchip separation

A simple and compact fluorescence excitation source was prepared using a 405 nm blue laser diode module and characterized in capillary electrochromatographic or capillary electrophoretic microchip separation. An inexpensive blue laser diode module with a tiny focusing lens was simply mounted at the center of an aluminum block on a miniature linear motion guide for heat dissipation and position control. A slit unit has a series of fifteen laser-machined slits with 1 mm space along the direction of the separation channel of the microchip above this unit. The laser beam was focused through a slit with 50 μm width to the separation channel at the position of a desired length. Although the excitation source unit was connected to a simple current controlled power supply, it was stable with 0.1% drift per hour and 1.3% (1σ) fluctuation in intensity. This simple excitation source can be prepared easily with inexpensive minimum optical components and mounted with a microchip on the stage of an ordinary fluorescence microscope for daily separation studies using a CE or CEC microchip. The applicability of the excitation source was evaluated with FITC-amino acid derivative mixtures using a polymer based CEC microchip packed fully with submicron silica beads in its microchannel.     

Indirect laser-induced fluorescence detection of explosive compounds using capillary electrochromatography and micellar electrokinetic chromatography

Mixtures of nitroaromatic and nitramine explosive compounds and their degradation products were analyzed using electrokinetically driven separations with both indirect laser-induced fluorescence (IDLIF) and UV absorption detection. Complete separations of the 14-component mixture (EPA 8330) were achieved using both capillary electrochromatography (CEC) and micellar electrokinetic chromatography (MEKC). IDLIF detection was performed using an epifluorescence system with excitation provided by a 635 nm diode laser and micromolar concentrations of the dye Cy-5 as the visualizing agent. While the sensitivity of the two detection methods was similar for the nitroaromatic compounds, the nitramines could only be detected using UV absorption due to their low fluorescence quenching efficiency of Cy-5. The detection sensitivity using IDLIF was limited by low frequency oscillations in the fluorescence background. The oscillations increased with higher electric field strength and were attributed to thermal fluctuations caused by Joule heating. Due to the more conductive running buffer and higher separation currents used in MEKC, sensitive IDLIF detection could only be achieved using low (approximately 100 V/cm) field strengths, resulting in long analysis times. CEC separations, which are typically run with low conductivity mobile phases to avoid bubble formation, are less sensitive to this effect. In CEC separations with IDLIF detection a stable fluorescence background using Cy-5 could be established using only a nonporous stationary phase. In capillaries packed with porous silica particles, anomalous migration behavior was observed with charged dye molecules and a stable fluorescence background could not be established under electrokinetic flow. This is the first demonstration of IDLIF in packed channel CEC.