Preparation of high selective molecularly imprinted polymers for tetracycline by precipitation polymerization

High selective molecularly imprinted polymers(MIPs) for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent,the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment.The results clearly indicated that the polymer,which had the highest molecular recognition abilities for tetracycline antibiotics,had been received.     

Preparation of magnetic molecularly imprinted polymer for the separation of tetracycline antibiotics from egg and tissue samples

Magnetic molecularly imprinted polymers were prepared using hydrophobic Fe₃O₄ magnetite as the magnetically susceptible component, oxytetracycline as template molecule, methacrylic acid as functional monomer, and styrene and divinylbenzene as polymeric matrix components. The polymers were applied to the separation of tetracycline antibiotics from egg and tissue samples. The extraction and clean-up procedures were carried out in a single step by blending and stirring the sample, extraction solvent and polymers. The analytes can be transferred from the sample matrix to the polymers directly or through the extraction solvent as medium. When the extraction was complete, the polymers adsorbing the analytes were easily separated from the sample matrix by an adscititious magnet. The analytes eluted from the polymers were determined by liquid chromatography–tandem mass spectrometry. The recoveries ranging from 72.8% to 96.5% were obtained with relative standard deviations in the range of 2.9–12.3%. The limit of detection was less than 0.2 ng g⁻¹. The feasibility of this method was validated by analysis of incurred egg and tissue samples, and the results were compared with those obtained by the classical method in which solvent extraction, centrifugation, and subsequent clean-up and concentration by solid-phase extraction were applied. The proposed method reduced the complicacy of classical method and improved the reliability of method.     

Water-compatible molecularly imprinted polymer for the selective recognition of fluoroquinolone antibiotics in biological samples

A novel water-compatible molecularly imprinted polymer (MIP), prepared with enrofloxacin (ENR) as the template, has been optimised for the selective extraction of fluoroquinolone antibiotics in aqueous media. The results of a morphological characterisation and selectivity tests of the polymer material for ENR and related derivatives are reported. High affinity for the piperazine-based fluoroquinolones marbofloxacin, ciprofloxacin, norfloxacin and ofloxacin was observed, whereas no retention was found for nonrelated antibiotics. Various parameters affecting the extraction efficiency of the polymer have been optimised to achieve selective extraction of the antibiotics from real samples and to reduce nonspecific interactions. These findings resulted in a MISPE/HPLC-FLD method allowing direct extraction of the analytes from aqueous samples with a selective wash using just 50% (v/v) organic solvent. The method showed excellent recoveries and precision when buffered urine samples fortified at five concentration levels (25–250 ng mL⁻¹ each) of marbofloxacin, ciprofloxacin, norfloxacin, enrofloxacin and sarafloxacin were tested (53–88%, RSD 1–10%, n = 3). Moreover, the biological matrix of the aqueous samples did not influence the preconcentration efficiency of the fluoroquinolones on the MIP cartridges; no significant differences were observed between the recovery rates of the antibiotics in buffer and urine samples. The detection limits of the whole process range between 1.9 and 34 ng mL^–1 when 5-mL urine samples are processed. The developed method has been successfully applied to preconcentration of norfloxacin in urine samples of a medicated patient, demonstrating the ability of the novel MIP for selective extraction of fluoroquinolones in urine samples.     

分子印迹聚合物在抗生素残留测定中的应用

抗生素的滥用及残留对生物体和环境造成极大危害,其含量低、种类多、基质复杂,通常需要进行样品前处理结合色谱分析以实现灵敏测定。分子印迹聚合物(MIPs)能选择性识别、有效富集目标分析物并消除干扰,已广泛用于抗生素的样品前处理中。该文对MIPs制备中面临的挑战进行了总结;对2016年以来抗生素MIPs的固相萃取应用进行了综述和展望,主要包括固相萃取、分散固相萃取、磁固相萃取、基质固相分散萃取、固相微萃取、搅拌棒吸附萃取。此外,该文重点介绍了抗生素MIPs的印迹新策略,如多模板、多功能单体、虚拟模板、刺激响应、亲水性印迹等。最后,该文对抗生素MIPs的制备和前处理应用进行了展望。     

Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples

An automated system has been developed for the determination of trace tetracycline antibiotics (TCs) in egg samples, based on online molecularly imprinted solid-phase extraction (MISPE) coupling with high-performance liquid chromatography (HPLC). Oxytetracycline and chlortetracycline were chosen as mixed templates to synthesize highly selective molecularly imprinted polymers for online extraction. Under the optimal online MISPE-HPLC condition, 10 mL egg samples were injected into the MISPE column and then the matrix was washed out. By rotating the switching valve, TCs were transferred to the analytical column and then separated by HPLC. Because sample pretreatment and chromatographic separation were carried out simultaneously, the whole analytical time (18 min) was significantly shortened compared with conventional offline techniques. The detection limits ranged from 0.8 to 1.3 ng/g. The enhancement factors were in the range of 159-410. The spiked recoveries of TCs in real egg samples ranged from 91.6 to 107.6% and the relative standard deviations (RSDs) were not higher than 4.0%.     

新型磁性分子印迹聚合物的制备及其在氟喹诺酮类抗生素检测中的应用

建立了磁性分子印迹聚合物固相萃取与高效液相色谱联用同时检测环境水中4种氟喹诺酮类抗生素的研究方法。分别利用扫描电子显微镜、透射电子显微镜、X-射线衍射、傅里叶红外光谱、振动样品磁强计对合成的磁性分子印迹聚合物进行表征,对影响吸附实验的参数（包括吸附剂用量、吸附和解析时间、洗脱液种类、样品pH值）进行了考察和优化。在最佳的实验条件下,4种氟喹诺酮类抗生素的方法检出限为4.1~21.3 μg/L,方法定量限为13.7~71.0 μg/L,样品加标回收率为70.6%~103.6%。该方法快速、灵敏,能够满足环境水样中氟喹诺酮类抗生素的残留检测要求。     

L-酪氨酸印迹分子的制备及性能研究

利用分子印迹技术采用传统加热法制备出酪氨酸他子印迹聚合物。用红外光谱分析了聚合物结构。研究了印迹他子与功能单体的物质的量对聚合物结合性的影响,吸收效率表征结果显示,与化学组成相同的空白聚合物相比,印迹聚合物具有更高的吸附效率。     

核壳结构的萘夫西林磁性分子印迹聚合物微球的制备及性能

以表面修饰双键的Fe₃O₄@SiO₂纳米颗粒为基体,以萘夫西林(nafcillin)为模板,甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用三步升温聚合法合成了核壳结构的萘夫西林磁性分子印迹聚合物。采用傅里叶变换红外光谱仪(FT-IR)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和振动样品磁强计(VSM)对制备的印迹聚合物微球进行了表征,得到的磁性印迹聚合物微球的粒径在320 nm左右,大小均匀,分散性较好,可以在外加磁场下与溶剂实现快速分离。对磁性印迹和非印迹聚合物进行了吸附性能研究,结果表明该印迹聚合物微球对模板分子具有很高的吸附容量(50.7 mg/g),特异性识别性能良好(印迹因子为2.46),有望应用于实际样品中萘夫西林残留量的富集分析。     

Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

Magnetic molecularly imprinted polymers for recognition and enrichment of polysaccharides from seaweed

New magnetic molecularly imprinted polymers with two templates were fabricated for the recognition of polysaccharides (fucoidan and alginic acid) from seaweed by magnetic solid‐phase extraction, and the materials were modified by seven types of deep eutectic solvents. It was found that the deep eutectic solvents magnetic molecularly imprinted polymers showed stronger recognition and higher recoveries for fucoidan and alginic acid than magnetic molecularly imprinted polymers, and the deep eutectic solvents‐4‐magnetic molecularly imprinted polymers had the best effects. The practical recovery of the two polysaccharides (fucoidan and alginic acid) purified with deep eutectic solvents‐4‐magnetic molecular imprinted polymers in seaweed under the optimal conditions were 89.87, and 92.0%, respectively, and the actual amounts extracted were 20.6 and 18.7 μg/g, respectively. To sum up, the developed method proved to be a novel and promising method for the recognition of complex polysaccharide samples from seaweed.     

冬凌草甲素分子印迹聚合物的制备及分子识别性能研究

以抗肿瘤药物分子冬凌草甲素为模板,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(ED-MA)作交联剂,采用沉淀聚合法和本体聚合法,制备对冬凌草甲素具有特定亲和选择性的分子印迹聚合物,并用激光粒度扫描和扫描电镜对聚合物的粒径和表面形貌进行了表征,采用平衡结合实验评价了两类分子印迹聚合物的吸附性能.结果表明,与使用...     

Evaluation of 2-hydroxyethyl methacrylate as comonomer in the preparation of water-compatible molecularly imprinted polymers for triazinic herbicides

In this work, the preparation and evaluation of water-compatible molecularly imprinted polymers for triazines using 2-hydroxyethyl methacrylate and methacrylic acid as comonomers is described. Four sets of molecularly imprinted and non-imprinted polymers for propazine were prepared at varying monomer molar ratios (from 4:0 to 1:3), and evaluated for the recognition of several triazines directly in aqueous media. The evaluation was performed by loading 1 mL of an aqueous solution containing 500 ng of each selected triazine, washing with 500 μL of acetonitrile, and eluting with 500 μL of methanol followed by 2 × 500 μL of a solution of methanol containing 10% of acetic acid. Final determinations were performed by high-performance liquid chromatography-ultraviolet detection. Improvement in molecular recognition of triazines in water was obtained on those molecularly imprinted polymers incorporating 2-hydroxyethyl methacrylate in 3:1 or 2:2 molar ratios, being the former selected as optimum providing recoveries for propazine up to 80%. A molecularly imprinted solid-phase extraction protocol was developed to ensure that triazines-selective recognition takes place inside selective binding sites in pure water media. Finally, the developed method was successfully applied to the determination of the selected triazines in environmental waters providing limits of detection from 0.16 and the 0.5 μg/L concentration range.     

Preparation of monodisperse magnetic surface molecularly imprinted polymers for selective recognition of lincomycin hydrochloride in milk

Monodisperse magnetic surface molecularly imprinted polymers (M-MIPs) with a specificity for lincomycin hydrochloride (LIN) were successfully prepared using surface-initiated atom transfer radical polymerization on the monodisperse magnetic polymer (vinylbenzylchloride/divinylbenzene) (Fe₃O₄/P_VBC/DVB) with LIN as a template molecule and 4-vinyl pyridine as the functional monomer. The Fe₃O₄ magnetic nanoparticles embedded itself in the micropores of polymer (P_VBC/DVB) by reversibly swelling adsorption method in which the pores of the polymer are swollen by the solvent, and then the Fe₃O₄ magnetic nanoparticles enter the pores, and as the solvent evaporates the pores of the polymer back to their original size, and Fe₃O₄ magnetic nanoparticles are left in the pores. The composition and magnetic properties of the polymer were characterized using scanning elemental microscopy analysis, X-ray diffraction, Surface element analysis and vibrating sample magnetometer analysis. The results of this study showed that the M-MIPs had good specific recognition ability for LIN. The imprinting factor is 3.72. The specific recognition capability of the polymers was affirmed by high performance liquid chromatography analysis. The spiked recovery was 94.3%–98.2% with RSD ≤ 3.7%, and the minimum detection limit is 15.0?ng/g (S/N?=?3) indicating that this material has application value in the pretreatment of complex samples.     

Isolation of sinapic acid from broccoli using molecularly imprinted polymers

A molecularly imprinted polymer was synthesized for the purpose of sinapic acid isolation from Egyptian nutraceutical Botrytis italica, L. (broccoli) due to its prominent medicinal and wide pharmacological activities. A computational study was first developed to determine the optimal template to functional monomer molar ratio. Based on the computational results, five polymers were synthesized using a bulk polymerization method with sinapic acid as the template molecule. Evaluation of the synthesized polymers binding performance was carried out using batch rebinding assay, which revealed that the molecularly imprinted polymer of molar ratio (1:4:20), template to functional monomer (4‐vinyl pyridine) to crosslinker (ethylene glycol dimethacrylate) was of optimum performance, thus, this polymer was applied for sinapic acid isolation from closely related analogues. This represents a more practical approach to isolate sinapic acid from different natural extracts selectively.     

Review of the recent progress in photoresponsive molecularly imprinted polymers containing azobenzene chromophores

Photoresponsive molecularly imprinted polymers (PMIPs) containing azobenzene have received wide research attention in recent years and made notable achievements. This article reviews the recent developments on PMIPs containing azobenzene. Topics include the following: (i) brief introduction of azobenzene, molecularly imprinted polymers, and PMIPs containing azobenzene; (ii) progress in functional monomers, cross-linkers, and polymerization conditions; (iii) preparation methods, properties, applications, as well as advantages and disadvantages of conventional PMIPs; (iv) substrate, preparation method, and applications of photoresponsive surface molecularly imprinted polymers; and (v) some perspectives for further development of PMIPs containing azobenzene.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

Preparation of magnetic molecularly imprinted polymers for the rapid and selective separation and enrichment of perfluorooctane sulfonate

As a persistent organic pollutant, perfluorooctane sulfonate has drawn a great worldwide attention. In this contribution, a novel material of magnetic molecularly imprinted polymers, based on perfluorooctane sulfonate, as a template, molecule was prepared. The magnetic molecularly imprinted polymers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, and vibrating sample magnetometry. The adsorption isotherm was measured, and adsorption kinetic tests were conducted. The adsorbents possess high recognition ability (2.460 mg/g) and short adsorption equilibration time (60 min). Besides, they show good specificity and good reusability with the adsorption capacities of adsorbent toward perfluorooctane sulfonate decreasing less than 3% after five adsorption–desorption cycles. The magnetic molecularly imprinted polymers were used successfully in the separation and enrichment of perfluorooctane sulfonate in real water sample and exhibited good prospects in environmental treatment and monitoring.     

Preparation of porous magnetic molecularly imprinted polymers for fast and specifically extracting trace norfloxacin residue in pork liver

Here, magnetic molecularly imprinted polymers were designed for norfloxacin via oil‐in‐water emulsifier‐free emulsion method. It was prepared by simply mixing norfloxacin, methacrylic acid‐co‐ethylene glycol dimethacrylate copolymer, and Fe₃O₄ together at room temperature. Characterized by multiple analytical tools, the particle size, pore size, pore volume, specific surface area, and saturation magnetization of the product were about 30 µm, 10–500 nm, 2.92 mL/g, 105.84 m²/g, and 3.052 emu/g, respectively. And the adsorption capacity was high at 27.04 mg/g towards norfloxacin. Combined with ultra high performance liquid chromatography, it was used to determine norfloxacin in real samples. Average recoveries were above 77.44% with relative standard deviations between 1.21 and 6.85% at three spiked levels (n = 3) for lake water and pork liver. The determination was achieved for the most complex biosample pork liver spiked with norfloxacin low to 30 ng/g, about 100 times less than the maximum residue limit regulated by Commission of the European Communities. All evidences demonstrated that the magnetic molecularly imprinted polymers can be used in practice for monitoring norfloxacin either in environmental water or meat product with high accuracy and reliability.     

Preparation and characterization of monodisperse molecularly imprinted polymers for the recognition and enrichment of oleanolic acid

Monodisperse molecularly imprinted polymers for oleanolic acid were successfully prepared by a precipitation polymerization method using oleanolic acid as a template, methacrylic acid as a functional monomer, and divinylbenzene/ethylene glycol dimethacrylate as a crosslinker in a mixture of acetonitrile and ethanol (3:1, v/v). The imprinted polymers and nonimprinted polymers were characterized by using scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The resulting imprinted polymers had average diameters of 3.15 μm and monodispersity values of 1.024. The results clearly demonstrate that use of ethanol as a cosolvent is indeed exceedingly effective in promoting the dissolution of oleanolic acid and in obtaining uniform microspheres. Molecular recognition properties and binding capability to oleanolic acid were evaluated by adsorption testing, which indicated that the imprinted polymers displayed optimal binding performance with a maximum adsorption capacity of 17.3 mg/g and a binding saturation time of 80 min. Meanwhile, the produced imprinted polymers exhibited higher selectivity to oleanolic acid than that for ursolic acid and rhein. Herein, the studies can provide theoretical and experimental references for the oleanolic acid molecular imprinted system.     

Preparation and evaluation of temperature and magnetic dual‐responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo‐responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N‐isopropylacrylamide as the thermo‐responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5–100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo‐responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature‐responsive regulation.