Direct electrochemistry and electrocatalysis of hemoglobin in gelatine film modified glassy carbon electrode

Direct electrochemical and electrocatalytic behavior of hemoglobin (Hb) immobilized on glass carbon electrode (GCE) containing gelatine (Gel) films was investigated. The characteristics of Hb/Gel film modified GC electrode were performed by using SEM microscopy, UV-vis spectroscopy and electrochemical methods. The immobilized Hb showed a couple of quasi-reversible redox peak with a formal potential of −0.38 V (versus SCE) in 0.1 M pH 7.0 PBS. The formal potential changed linearly from pH 4.03 to 8.41 with a slope value of −52.0 mV pH⁻¹, which suggested that a proton transfer was accompanied with each electron transfer (ET) in the electrochemical reaction. The Hb/gelatine/GCE displayed a rapid amperometric response to the reduction of H₂O₂ and nitrite.     

Direct electrochemistry and electrocatalysis of heme-protein based on N,N-dimethylformamide film electrode

The heme-protein including myoglobin (Mb), hemoglobin (Hb) and horseradish peroxidase (HRP) were immobilized on normal graphite electrode by using N,N-dimethylformamide (DMF). The proteins undergo direct electron-transfer reactions. The current is linearly dependent on the scan rate, indicating that the direct electrochemistry of heme-protein in that case is a surface-controlled electrode process. The E°s are linearly dependent on solution pH (redox-Bohr effect), indicating that the electron transfer was proton-coupled. Ultraviolet-visible (UV-vis) and reflection-absorption infrared (RAIR) spectra suggest that the conformation of proteins in the presence of DMF are little different from that proteins alone the conformation changes reversibly in the range of pH 3.0-10.0. The catalytic activity of proteins were examined by hydrogen peroxide and nitrite.     

Direct electrochemistry and electrocatalysis of heme proteins on SWCNTs-CTAB modified electrodes

Direct electrochemistry and electrocatalysis of heme proteins including hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP) were studied with the protein incorporated single walled carbon nanotubes (SWCNTs)-cetylramethylammonium bromide (CTAB) nanocomposite film modified glassy carbon electrodes (GCEs). The incorporated heme proteins were characterized with Fourier transform infrared spectroscopy (FTIR), ultraviolet visible (UV) spectroscopy, atomic force microscopy (AFM) and electrochemistry, indicating the heme proteins in SWCNTs-CTAB nanocomposite films keep their secondary structure similar to their native states. The direct electron transfer between the heme proteins in SWCNTs-CTAB films and GCE was investigated. The electrochemical parameters such as formal potentials and apparent heterogeneous electrontransfer rate constants (k_s) were estimated by square wave voltammetry with nonlinear regression analysis. The heme protein-SWCNT-CTAB electrodes show excellent electrocatalytic activities for the reduction of H₂O₂ and NO₂⁻, which have been utilized to determine the concentrations of H₂O₂ and NO₂⁻.     

Direct electrochemistry and electrocatalysis of myoglobin immobilized in hyaluronic acid and room temperature ionic liquids composite film

A novel biocomposite film based on hyaluronic acid (HA) and hydrophilic room temperature ionic liquid 1-ethyl-3-methyl-imidazolium tetrafluoroborate ([EMIM][BF₄]) was explored. Here, HA was used as a binder to form [EMIM][BF₄]-HA composite film and help [EMIM][BF₄] to attaching on glass carbon electrode (GCE) surface, while doping [EMIM][BF₄] in HA can effectively reduce the electron transfer resistance of HA. The composite film can be readily used as an immobilization matrix to entrap myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the Mb-[EMIM][BF₄]-HA composite film modified GCE (Mb-[EMIM][BF₄]-HA/GCE) through direct electron transfer between Mb and the underlying electrode. The Mb-[EMIM][BF₄]-HA/GCE showed an excellent electrocatalytic activity toward the reduction of H₂O₂. Based on the [EMIM][BF₄]-HA biocomposite film, a third-generation reagentless biosensor could be constructed for the determination of H₂O₂.     

Direct electrochemistry and electrocatalysis of hemoglobin on gold nanoparticle decorated carbon ionic liquid electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as modifier and further gold nanoparticles were in situ electrodeposited on the surface of CILE. The fabricated Au/CILE was used as a new platform for the immobilization of hemoglobin (Hb) with the help of a Nafion film. Electrochemical experimental results indicated that direct electron transfer of Hb was realized on the surface of Au/CILE with a pair of well-defined quasi-reversible redox peaks appeared. The formal peak potential (E⁰′) was obtained as −0.210 V (vs. SCE) in pH 7.0 phosphate buffer solution (PBS), which was the characteristic of Hb heme Fe(III)/Fe(II) redox couple. The fabricated Nafion/Hb/Au/CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and the reduction peak current was in proportional to TCA concentration in the range from 0.2 to 18.0 mmol/L with the detection limit as 0.16 mmol/L (S/N = 3). The proposed electrode showed good stability and reproducibility, and it had the potential application as a new third-generation electrochemical biosensor.     

肌红蛋白在海藻酸钠水凝胶中的电化学和电催化特性

海藻酸钠(Sodium Alginate,SA)是由L-葡萄糖醛酸与D-甘露糖醛酸组成的高分子线性糖醛酸,常作为固定化酶包埋材料。本文研究了海藻酸钠水凝胶膜中的肌红蛋白在磷酸盐缓冲溶液中的直接电化学和酶催化性质,探讨了测定H2O2和NO2^-的可能性。     

Direct electrochemistry and electrocatalysis of myoglobin-based nanocomposite membrane electrode

The direct electron transfer of myoglobin (Mb) was achieved based on the immobilization of Mb/Silver nanoparticles (AgNPs) on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan(Chit) film. The immobilized Mb displayed a pair of well-defined and reversible redox peaks with a formal potential (E^θ′) of − 24 mV (vs. Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k_s) of Mb confined to Chit-MWNTs film was evaluated as 5.47 s^{− 1} according to Laviron's equation. The surface concentration (Γ^?) of the electroactive Mb in the Chit-MWNTs film was estimated to be (4.16 ± 0.35) × 10^{− 9} mol cm^{− 2}. Meanwhile, the catalytic ability of Mb toward the reduction of H₂O₂ was studied. Its apparent Michaelis–Menten constant for H₂O₂ was 0.024 mM, showing a good affinity. The linear range for H₂O₂ determination was from 2.5 × 10^{− 5} M to 2.0 × 10^{− 4} M with a detection limit of 1.02 × 10^{− 6} M (S/N = 3). Moreover, the biosensor displays rapid response to H₂O₂ and good stability and reproducibility.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Direct electrochemistry and electrocatalysis of cytochrome c immobilized on gold nanoparticles-chitosan-carbon nanotubes-modified electrode

A robust and effective nanohybrid film based on gold nanoparticles (GNPs)/chitosan (Chit)/multi-walled carbon nanotubes (MWNTs) was prepared by a layer-by-layer self-assembly technique. Cytochrome c (Cyt c) was successfully immobilized on the nanohybrid film modified glassy carbon (GC) electrode by cyclic voltammetry. The direct electron transfer between Cyt c and the modified electrode was investigated in detail. Cyt c shows a couple of quasi-reversible and well-defined cyclic voltammetry peaks with a formal potential (E^0′) of −0.16 V (versus Ag/AgCl) in pH 7.0 phosphate buffer solution (PBS). The Cyt c/GNPs/Chit/MWNTs modified GC electrode gives an improved electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂). The sensitivity is 92.21 μA mM⁻¹ cm⁻² and the calculated apparent Michaelis-Menten constant () is 0.791 mM, indicating a high-catalytic activity of Cyt c. The catalysis currents increase linearly to the H₂O₂ concentration in a wide range of 1.5 × 10⁻⁶ to 5.1 × 10⁻⁴ M with a correlation coefficient 0.999. The detection limit is 9.0 × 10⁻⁷ M (at the ratio of signal to noise, S/N = 3). Moreover, the modified electrode displays rapid response (5 s) to H₂O₂, and possesses good stability and reproducibility.     

Direct electrochemistry and electrocatalysis of hemoglobin on chitosan-room temperature ionic liquid-TiO(2)-graphene nanocomposite film modified electrode

TiO₂-graphene nanocomposite was prepared by hydrolysis of titanium isopropoxide in colloidal suspension of graphene oxide and in situ hydrothermal treatment. The direct electrochemistry and electrocatalysis of hemoglobin in room temperature ionic liquid 1-Butyl-3-methylimidazolium hexafluorophosphate, chitosan and TiO₂-graphene nanocomposite modified glassy carbon electrode were investigated. The biosensor was examined by using UV-vis spectroscopy, scanning electron microscopy and electrochemical methods. The results indicated that hemoglobin remained its bioactivity on the modified electrode, showing a couple of well-defined and quasi-reversible redox peaks, corresponding to hemoglobin Fe^III/Fe^II couple. The kinetic parameters for the electrode reaction, such as the formal potential (E^o'), the electron transfer rate constant (k_s), the apparent coverage (Γ), and Michaelis–Menten constant (K_m) were evaluated. The biosensor showed good electrochemical responses to the reduction of H₂O₂ in the ranges of 1–1170 μM. The detection limit was 0.3 μM (S/N = 3). The properties of this composite film, together with the bioelectrochemical catalytic activity, could make them useful in the development of bioelectronic devices, and investigation of electrochemistry of other heme proteins at functional interface.     

Direct Electron Transfer and Electrocatalysis of Myoglobin Based on its Direct Immobilization on Carbon Ionic Liquid Electrode

Direct electron transfer of myoglobin (Mb) was achieved by its direct immobilization on carbon ionic liquid electrode (CILE) with a conductive hydrophobic ionic liquid, 1‐butyl pyridinium hexaflourophosphate ([BuPy][PF₆]) as binder for the first time. A pair of well‐defined, quasi‐reversible redox peaks was observed for Mb/CILE resulting from Mb redox of heme Fe(III)/Fe(II) redox couple in 0.1 M phosphate buffer solution (pH 7.0) with oxidation potential of ?0.277 V, reduction potential of ?0.388 V, the formal potential E°′ (E°′=(E_pa+E_pc)/2) at ?0.332 V and the peak‐to‐peak potential separation of 0.111 V at 0.5 V/s. The average surface coverage of the electroactive Mb immobilized on the electrode surface was calculated as 1.06±0.03×10^?9 mol cm^?2. Mb retained its bioactivity on modified electrode and showed excellent electrocatalytic activity towards the reduction of H₂O₂. The cathodic peak current of Mb was linear to H₂O₂ concentration in the range from 6.0 μM to 160 μM with a detection limit of 2.0 μM (S/N=3). The apparent Michaelis–Menten constant (K and the electron transfer rate constant (k_s) were estimated to be 140±1 μM and 2.8±0.1 s^?1, respectively. The biosensor achieved the direct electrochemistry of Mb on CILE without the help of any supporting film or any electron mediator.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized in a magnetic nanoparticles-chitosan film

Magnetic nanoparticles (Fe₃O₄) were synthesized by a chemical coprecipitation method. X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to confirm the crystallite structure and the particle's radius. The Fe₃O₄ nanoparticles and chitosan (CS) were mixed to form a matrix in which haemoglobin (Hb) can be immobilized for the fabrication of H₂O₂ biosensor. The Fe₃O₄-CS-Hb film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks due to the redox of Hb-heme Fe (III)/Fe (II) in a pH 7.0 phosphate buffer. The formal potential of Hb-heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 4.0-10.0 with a slope of 46.5 mV pH⁻¹, indicating that electron transfer was accompanied with single proton transportation in the electrochemical reaction. The surface coverage of Hb immobilized on Fe₃O₄-CS film glassy carbon electrode was about 1.13 × 10⁻¹⁰ mol cm⁻². The heterogeneous electron transfer rate constant (k_s) was 1.04 s⁻¹, indicating great facilitation of the electron transfer between Hb and magnetic nanoparticles-chitosan modified electrode. The modified electrode showed excellent electrocatalytic activity toward oxygen and hydrogen peroxide reduction. The apparent Michaelis-Menten constant for H₂O₂ was estimated to be 38.1 μmol L⁻¹.     

Layer-by-layer films of hemoglobin or myoglobin assembled with zeolite particles: electrochemistry and electrocatalysis

Positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 in solutions and negatively charged zeolite particles in dispersions were alternately adsorbed onto solid surfaces forming [zeolite/protein](n) layer-by-layer films, which was confirmed by quartz crystal microbalance (QCM) and cyclic voltammetry (CV). The protein films assembled on pyrolytic graphite (PG) electrodes exhibited a pair of well-defined, nearly reversible CV peaks at about -0.35 V vs. SCE at pH 7.0, characteristic of the heme Fe(III)/Fe(II) redox couples. Hydrogen peroxide (H(2)O(2)) and nitrite (NO(2)(-)) in solution were catalytically reduced at [zeolite/protein](7) film modified electrodes, and could be quantitatively determined by CV and amperometry. The shape and position of infrared amide I and II bands of Hb or Mb in [zeolite/protein](7) films suggest that the proteins retain their near-native structure in the films. The penetration experiments of Fe(CN)(6)(3-) as the electroactive probe into these films and scanning electron microscopy (SEM) results indicate that the films possess a great amount of pores or channels. The porous structure of ]zeolite/protein](n) films is beneficial to counterion transport, which is crucial for protein electrochemistry in films controlled by the charge-hopping mechanism, and is also helpful for the diffusion of catalysis substrates into the films. The proteins with negatively charged net surface charges at pH 9.0 were also successfully assembled with like-charged zeolite particles into layer-by-layer films, although the adsorption amount was less than that assembled at pH 5.0. The possible reasons for this were discussed, and the driving forces were explored.     

Direct electrochemistry and electrocatalysis of hemoglobin in sodium alginate film on a BMIMPF6 modified carbon paste electrode

A room temperature ionic liquid (RTIL) modified carbon paste electrode was constructed based on the substitute of paraffin with 1-butyl-3-methyl-imidazolium hexafluorophosphate (BMIMPF₆) as binder for carbon paste. Direct electrochemistry and electrocatalytic behaviors of hemoglobin (Hb) entrapped in the sodium alginate (SA) hydrogel film on the surface of this carbon ionic liquid electrode (CILE) were investigated. The presence of IL in the CILE increased the electron transfer rate and provided a biocompatible interface. Hb remained its bioactivity on the surface of CILE and the SA/Hb modified electrode showed a pair of well-defined, quasi-reversible cyclic voltammetric peaks with the apparent standard potential (E^0′) at about −0.344 V (vs. SCE) in pH 7.0 Britton–Robinson (B–R) buffer solution, which was attributed to the Hb Fe(III)/Fe(II) redox couple. UV–Vis absorption spectra indicated that heme microenvironment of Hb in SA film was similar to its native status. Hb showed a thin-layer electrochemical behavior in the SA film with the direct electron transfer achieved on CILE without the help of electron mediator. Electrochemical investigation indicated that Hb took place one proton with one electron electrode process and the average surface coverage of Hb in the SA film was 3.2 × 10⁻¹⁰ mol/cm². The immobilized Hb showed excellent electrocatalytic responses to the reduction of H₂O₂ and nitrite.     

琼脂糖膜固载肌红蛋白催化还原过氧化物的研究

用琼脂糖(agarose)将肌红蛋白(Mb)固定在玻碳电极(GCE)表面,制备了Mb-Agarose膜修饰电极。在水-乙醇混合溶液中,包埋在Agarose中的Mb与电极发生直接电子传递,并且能催化还原H2O2、过氧化丁酮、氢过氧化叔丁基、氢过氧化异丙基苯等过氧化物和NO。Mb-Agarose膜修饰电极具有较好的稳定性和重现性,可用于上述过氧化物和亚硝酸盐的定量检测。     

Direct electrochemistry and electrocatalysis of myoglobin immobilized on L-cysteine self-assembled gold electrode

Myoglobin (Mb) has been successfully immobilized on a self-assembled monolayer (SAM) of L-cysteine (Cys) on a gold electrode, Au/Cys. The presence of a pair of well-defined and nearly reversible waves centered at ca. 0.086 V vs Ag/AgCl (pH 6.5) suggests that the native character of Mb heme Fe(III/II) redox couple has been obtained. The formal potential of Mb on Cys SAM exhibited pH-dependent variation in the pH range of 5-9 with a slope of 55 mV/pH, indicating that the electron transfer is accompanied by a single proton exchange. Thermodynamic and kinetic aspects of Mb adsorption processes on Au/Cys were studied by using voltammetric and quartz-crystal microbalance methods. The Au/Cys electrode with immobilized Mb exhibited electrocatalytic activity toward ascorbic acid (AA) oxidation with an overpotential decrease of over 400 mV and a linear dependence of current on the AA concentration from 0.5 to 5.0 mmol L(-1).     

Direct electrochemistry and electrocatalysis of myoglobin based on silica-coated gold nanorods/room temperature ionic liquid/silica sol-gel composite film

A novel biosensor based on the silica-coated gold nanorods (GNRs@SiO₂) and hydrophilic room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) was fabricated for the determination of hydrogen peroxide (H₂O₂) and nitrite. GNRs@SiO₂ can not only act as a binder to hinder [bmim][BF₄] (RTIL) leaking from the electrode surface, but also provide a favorable microenvironment for direct electrochemistry of myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the GNRs@SiO₂-Mb/RTIL-sol-gel composite film modified GCE (GNRs@SiO₂-Mb/RTIL-sol-gel/GCE) through direct electron transfer between Mb and the underlying electrode. This biosensor showed an excellent electrocatalytic activity towards hydrogen peroxide and nitrite. The linear range for the determination of H₂O₂ was from 0.2 to 180 μM with a detection limit of 0.12 μM based on the signal-to-noise ratio of 3. In addition, the biosensor also exhibited high selectivity, good reproducibility, and long-term stability. Therefore, this kind of composite film can provide an ideal matrix for protein immobilization and biosensor fabrication.     

Direct electrochemistry and electrocatalysis of hemoglobin on undoped nanocrystalline diamond modified glassy carbon electrode

Direct electrochemistry of hemoglobin (Hb) was observed at glassy carbon electrode (GCE) modified with undoped nanocrystalline diamond (UND) and Hb multilayer films via layer-by-layer assembly. UV-VIS absorbance spectroscopy, electrochemical impedance spectroscopy and cyclic voltammograms were employed to characterize the film. The results showed that the UND had the effect of enhancing the electron transfer between Hb and the electrode surface. Hb in the multilayer films maintained its bioactivity and structure. It also exhibited a good catalytic activity towards the reduction of H(2)O(2). The reciprocal of catalytic current showed a linear dependence on the reciprocal of H(2)O(2) concentration ranging from 0.5 microM to 0.25 mM with a detection limit of 0.4 microM. The apparent Michaelis-Menten constant was estimated to be 0.019 mM.     

Direct electrochemistry and electrocatalysis with hemoglobin in water-soluble quantum dots film on glassy carbon electrode

The direct electrochemistry of hemoglobin can be performed by immobilizing hemoglobin in a water-soluble quantum dots (CdSe-ZnS) film on glassy carbon electrode.     

Electrochemistry and electrocatalysis of polyoxometalate-ordered mesoporous carbon modified electrode

In this work, we have developed a convenient and efficient method for the functionalization of ordered mesoporous carbon (OMC) using polyoxometalate H₆P₂Mo₁₈O₆₂·xH₂O (P₂Mo₁₈). By the method, glassy carbon (GC) electrode modified with P₂Mo₁₈ which was immobilized on the channel surface of OMC was prepared and characterized for the first time. The large specific surface area and porous structure of the modified OMC particles result in high heteropolyacid loading, and the P₂Mo₁₈ entrapped in this order matrix is stable. Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption-desorption isotherm and X-ray diffraction (XRD) were employed to give insight into the intermolecular interaction between OMC and P₂Mo₁₈. The electrochemical behavior of the modified electrode was studied in detail, including pH-dependence, stability and so on. The cyclic voltammetry (CV) and amperometry studies demonstrated that P₂Mo₁₈/OMC/GC electrode has high stability, fast response and good electrocatalytic activity for the reduction of nitrite, bromate, idonate, and hydrogen peroxide. The mechanism of catalysis on P₂Mo₁₈/OMC/GC electrode was discussed. Moreover, the development of our approach for OMC functionalization suggests the potential applications in catalysis, molecular electronics and sensors.