提篮型杯[4]芳烃冠醚的合成及其对铯离子络合性能的研究

本文从去叔丁基化的杯[4]芳烃出发,先后分别在1,3-和2,4-酚羟基位点上引入正辛烯基和支链冠醚,最后通过烯烃复分解反应,合成了一种新型的提篮型杯芳烃冠醚化合物,产物结构经过1H NMR和HRMSESI表征确定.分别采用1H NMR和UV-vis方法,研究了1,3-桥联成环后张力对另一端冠醚环络合选择性的影响.结果表...     

Synthesis of novel calix[4]crown telomers and selective extraction of cesium ions

p-tert-Butylcalix[4]diazacrown-4 telomer, which contains hard and soft ion binding sites, was synthesized. It exhibited high selectivity toward cesium ions. The binding sites may complex alkali metal ions selectively.     

杯冠衍生物BEHBCalixC6对铯离子萃取性能的研究

本文以杯冠BEHBCalixC6为萃取剂,二氯甲烷为稀释剂,通过液液萃取,研究了BEHBCalixC6对苦味酸铯的萃取性能.研究表明,随着主、客体摩尔比的增加,萃取率增大.在摩尔比50:1时,萃取率可以达到77%以上.考察了测量参比溶液、预饱和两相稀释剂、稀释剂种类和溶液中Na+浓度等因素对萃取率的影响.     

Studies towards the total synthesis of (−)-borrelidin: a strategy for the construction of the C11-C15 cyanodiene fragment and the utility of RCM for macrocyclization using model systems

We report here a methodology for the construction of a conjugated cyanodiene synthon and the propensity of such synthons to participate in the olefin metathesis reaction. To this end, we have developed a strategy for the construction of the C11-C15 fragment of borrelidin and demonstrated the utility of the RCM reaction in the preparation of the final macrolide. To our knowledge, this is the first example of a RCM with a nitrile functionality on a diene.     

Synthesis of cesium selective pyridyl azocalix[n]arenes

A series of pyridylazo calix[n]arenes (n=4, 6, 8) including the first examples of mixed hetroaryl azocalix(n)arenes have been synthesized by coupling calix[n]arenes with diazonium salts derived from amino pyridines. It has been observed that the coupling reaction of diazonium salt obtained from 3-aminopyridine with calix[n]arene gives tetrakis-, hexakis- and octakis (pyridylazo)calix[n]arenes (n=4,6,8) while those derived from 4-aminopyridine give partially substituted (4-pyridylazo)calix[n]arene analogs. There is no reaction of calix(n)arenes with diazonium salts derived from 2-aminopyridine under identical conditions of experiments. The conformational analysis of synthesized compounds have been ascertained by detailed spectral measurements and single crystal X-ray analysis of 5-(3′-pyridylazo)-25,26,27,28-tetrahydroxycalix[4]arene. A rational explanation for the observed partial and exhaustive coupling reaction in the synthesis of heteroaryl azocalix(n)arenes has been suggested. Preliminary evaluation of synthesized derivatives as molecular receptors for metal ions indicates that they have good potential to function as selective ionic filters for cesium ions.     

基于咔唑衍生物的荧光化学传感器的合成及其对金属离子的选择性识别性能

以咔唑为原料合成了2个荧光化学传感器,所得化合物的组成和结构经元素分析以及质谱、红外光谱、核磁共振氢谱验证.通过在25℃下进行荧光光谱滴定,研究了传感器在体积比为1∶1的二甲基亚砜/水缓冲溶液[三羟甲基氨基甲烷盐酸盐(Tris-HCl),pH=7.4]中对Cu2+和Fe3+的选择性识别作用.结果表明,所合成的传感器与Cu2+和Fe3+形成1∶1的配合物并导致荧光猝灭,并对Cu2+离子和Fe3+离子具有较高的选择性识别和荧光传感性能.     

Spectral characterization of a novel near-infrared cyanine dye: a study of its complexation with metal ions

The spectral features of the near-infrared (NIR) dye TG-170 in different solutions and its complexation with several metal ions were investigated. The absorbance maxima of the dye are at λ=819, 805, and 791 nm in dimethyl sulfoxide (DMSO), methanol, and a buffer of pH 5.9, respectively. These values match the output of a commercially available laser diode (780 nm), thus making use of such a source practical for excitation. The emission wavelengths of the dye are at λ_em =822, 812, and 803 nm in DMSO, methanol, and the buffer, respectively. The molar absorptivity and fluorescence quantum yield increase accordingly. The addition of either an Al(III) ion or Be(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=3.11×10⁵ M⁻¹ for the Al(III) ion and K_SV=1.17×10⁶ M⁻¹ for the Be(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 4.37×10⁴ M⁻¹ for the Al–dye complex and 1.94×10⁶ M⁻¹ for the Be–dye complex.     

As low as reasonably achievable catalyst loadings in the cross metathesis of olefins with ethyl acrylate

A series of ruthenium catalysts for olefin metathesis have been screened in the cross metathesis of 1,9-decadiene with ethyl acrylate. Under optimized reaction conditions a catalyst loading of only 100 ppm in respect to double bonds was sufficient for complete conversion of the diene.     

Synthesis of siloxy-modified second generation Hoveyda-Grubbs catalysts and their catalytic activity

Efficient syntheses of the first ruthenium alkylidene complexes bearing siloxide ligands are described. Second generation Hoveyda-Grubbs catalyst is shown to undergo efficient functionalization with a number of potassium silanolates to give disiloxy derivatives. The complexes obtained are found catalytically active in selected metathesis transformations.     

Synthesis of a novel triptycene-based molecular tweezer and its complexation with paraquat derivatives

[reaction: see text] A novel triptycene-based molecular tweezer has been synthesized, and its complexation with paraquat derivatives in solution and in the solid state has been studied. Due to its electron-rich cavity, the molecular tweezer could form stable complexes with paraquat derivatives with different functional groups. Moreover, it was also found that formation of the complexes was caused by a charge transfer interaction and the complexes dissociated upon two one-electron reduction of the bipyridinium ring.     

双烯烃橡胶复分解-加氢制备端羧基聚烯烃

采用烯烃复分解法,以双烯烃橡胶为原料,在Grubbs II代催化剂和链转移剂(马来酸)的作用下制得相应的端羧基聚二烯烃,通过对甲苯磺酰肼/三正丙胺试剂对其进一步加氢得到端羧基聚烯烃.主要研究了反应时间、反应温度、橡胶中双键/催化剂摩尔比、橡胶中双键/链转移剂摩尔比等因素对产物分子量及分子量分布的影响.通过核磁共振氢谱(1H-NMR)和碳谱(13C-NMR)、红外光谱(FTIR)、凝胶渗透色谱仪(GPC)、热重分析(TGA)和示差扫描量热分析(DSC)对产物的结构和性能进行了测试表征.结果表明,通过调整橡胶中双键/催化剂的摩尔比或橡胶中双键/链转移剂的摩尔比可以调控产物的分子量.另外,采用该方法制得的端羧基聚丁二烯具有较高的反式1,4-结构含量,与原料相比其顺式1,4-结构含量大幅下降,从而对产物的性能产生一定影响;而以异戊橡胶为原料时并没有观察到该现象.端羧基聚二烯烃经加氢反应后转变成端羧基聚烯烃,具有更好的热稳定性.该方法合成步骤简单,产物分子量可控,为功能材料的制备提供了新的可能.     

Kinetic modeling analysis for the removal of cesium ions from aqueous solutions using polyaniline titanotungstate

Polyaniline titanotungstate has been synthesized by incorporation of organic polymer polyaniline into the inorganic precipitate of titanotungstate. This material was characterized using X-ray, IR and TGA studies. The influences of initial concentration of metal ions, particle size and temperature have been reported. The comparison of composite and inorganic materials was studied and indicating that the composite material is better than the inorganic in selectivity of Cs⁺ ions. Thermodynamic parameters, such as changes in Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) have been calculated. The numerical values of ΔG decrease with an increase in temperature, indicating that the sorption reaction of adsorbent was spontaneous and more favorable at higher temperature. The positive values of ΔH correspond to the endothermic nature of sorption processes and suggested that chemisorptions were the predominant mechanism. A comparison of kinetic models applied to the sorption rate data of Cs⁺ ions was evaluated for the pseudo first-order, the pseudo second-order, intraparticle diffusion and homogeneous particle diffusion kinetic models. The results showed that both the pseudo second-order and the homogeneous particle diffusion models were found to best correlate the experimental rate data. Self diffusion coefficient (D_i), Activation energy (Ea) and entropy (ΔS^*) of activation were also computed from the linearized form of Arrhenius equation.     

The role of the solvation shell decomposition of alkali metal ions in their selective complexation by resorcinarene and its cavitand

2-Methylresorcinarene and its methylene-bridged cavitand derivative as host compounds were investigated in selective complexation of alkali metal ions as guests in methanol media by photoluminescence measurements. These host molecules possess either flexible (2-methylresorcinarene) or rigid (cavitand) molecular skeleton. The Benesi–Hildebrand method and the van't Hoff theory have been applied to determine the stability constants and the thermodynamic parameters, respectively. Considerable interactions between 2-methylresorcinarene and Li⁺ or Na⁺ ions have been observed while the rigid cavitand derivative can interact only with K⁺ or Cs⁺ ions. Neither the complexes of 2-methylresorcinarene with K⁺ or Cs⁺ nor those of the cavitand derivative with Li⁺ or Na⁺ ions are stable at room temperature in methanol media. Quantum-chemical investigations justified that only solvated Li⁺ and Na⁺ ions can form stable complexes with 2-methylresorcinarene while unsolvated K⁺ and Cs⁺ ions form stable complexes with the methylene-bridged cavitand. These results highlight that the stability of the guest solvation shell and its size could play a key role in the selectivity behaviour of host molecules.     

Conductance study of the complexation of substituted and lariat 16-crown-5 derivatives with alkali metal ions in nonaqueous solvents

Formation constants (K _ML) of 1:1 complexes of 15-(2,5-dioxahexyl)-15-methyl-16-crown-5 (L16C5) and 15,15-dimethyl-16-crown-5 (DM16C5) with alkali metal ions were determined in acetonitrile (AN) and propylene carbonate (PC) by conductometry at 25°C. Except for the case of Li⁺-and K⁺-16C5 complexes in PC, the selectivity sequences of L16C5 and DM16C5 are identical with those of the parent crown ether 16-crown-5 (16C5) regardless of the solvent (AN, PC, methanol) (Na¹ > Li⁺ > K⁺ > Rb⁺ > Cs⁺), which show the size-fit correlation. The selectivities of L16C5 and DM16C5 for the alkali metal ions are governed not by the sidearms but by the cavity size. The stability of the crown ether complex is dependent not on the dielectric constant but largely on the donor number of the solvent. TheK _ML(M₁ ⁺)/K _ML(M₂ ⁺) ratio of L16C5 or 16C5 varies very much with the solvent in the cases of M₁=Na, M₂=K and M₁=Na, M₂=Li, but that of DM16C5 is almost constant regardless of the solvent.     

Thermodynamics of complexation of cesium ions with dibenzo-18-crown-6 in hydrophobic ionic liquids

The stability constants of the [Cs(DB18C6)]⁺ complex (DB18C6 is dibenzo-18-crown-6, L) in hydrophobic ionic liquids (room-temperature ionic liquids, RTIL) trioctylmethylammonium salicylate ([TOMA][Sal]), tetrahexylammnoium dihexylsulfosuccinate ([THA][DHSS]), and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][N(Tf)₂], as well as of the [Cs(18C6)₂]⁺ complex in [BMIM][N(Tf)₂], were measured by 133Cs NMR in the temperature range 27–57°C. The changes in the enthalpy and entropy of complex formation were determined. A linear correlation was revealed between logK ₁ and the extraction factor logD _Cs^DB18C6 for the cesium extraction from an aqueous solution into the RTIL.     

Synthesis and complexation properties towards metal ions of new tri-substituted thiacalix[4]arenes

New thiacalix[4]arenes appended with three amide functions have been prepared. Their conformations have been solved thanks to ¹H NMR 2D correlation spectroscopy (COSY) and nuclear overhauser and exchange spectroscopy (NOESY). The complexation ability of these ligands towards various metal ions (Cd^2 + , Pb^2 + , Pd^2 + , Ni^2 + , Hg^2 + , Hg⁺, Ag⁺, Zn^2 +  and Cu^2 + ) has been investigated by the UV–vis absorption and the stoichiometry of the metal–ligand complexes was determined.     

Synthesis,structure, and thermal properties of fluorinated cesium beta-diketonates

Four fluorinated cesium beta-diketonates, Cs(CF₃COCHCOCF₃) (Cs(hfac)), Cs(CF₃COCHCOCH₃) (Cs(tfac)), Cs(OH₂)((Me)₃CCOCHCOCF₃) (Cs(OH₂)(ptac)), and Cs(OH₂)(PhCOCHCOCF₃) (Cs(OH₂)(btfac)), were synthesized by interaction of the corresponding beta-diketone and Cs₂CO₃ in Et₂O. The formation of Сs(CF₃C(OH)₂CH₂C(OH)₂CF₃)(CF₃COO) or Cs(CF₃C(OH)₂CH₂COCH₃)(tfac) was shown to be dependent on the reaction conditions. The compounds were characterized by elemental analysis, single crystal X-ray diffraction, and TG/DTA analysis. All compounds have ionic structures organized into pseudo chains (in the case of Cs(hfac) and Cs(CF₃C(OH)₂CH₂COCH₃)(tfac)) or pseudo layers (in other cases). According to the TG data Cs(hfac), Cs(tfac), Cs(OH₂)(ptac,) and Cs(OH₂)(btfac) decompose in inert atmosphere within the temperature range 30–550?°C.     

Synthesis and electrical properties of polyacetylene derivatives

Cyclopolymerization of 1,6‐heptadiyne derivatives containing the bulky substitutents was carried out by metathesis catalyst systems. The catalytic activity of molybdenum (V) chloride (MoCl₅) in homopolymerization is greater than that of the MoCl₅‐cocatalyst system, and copolymerization is vice versa in catalytic activity. Newly synthesized homo‐ and copolymers were soluble in common organic solvents and could afford thin film by solution‐casting onto the indium–tin oxide coated glass substrate. The NMR, Fourier transform infrared spectroscopic, and UV–visible spectra indicated that these polymers have a linear conjugated cyclic polyene structure having a bulky substitutent as a pendant group. The number‐average molecular weight of these polymers was in the range of 2.4–6.27 × 10³. The copolymers exhibited a relatively higher molecular weight than that of the homopolymers. The copolymers were stable up to 380 °C. The electrical conductivities of the I₂‐doped copolymer thin film by the four‐point probe method and surface plasmon resonance spectroscopy were about 500 and 600 S/cm, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 958–964, 2002     

Synthesis of benzanthron derivatives for selective detection by fluorescence of copper ions

The paper reports on the synthesis of two new benzanthron derivatives with intense yellow-orange fluorescence and their copolymers with styrene. The photophysical characteristics of the new low and high molecular weight fluorescent compounds have been studied in organic solvents of different polarity. The effect of the chemical nature of the C-3 substituent on the photophysical properties of the new dyes is discussed. The complexes formed between the benzanthron fluorophores and metal cations in solution have been studied with regard to potential applications as fluorescent sensors for metal ion contamination. The results show that the C-3 substituent determines a selective response to the presence of Cu²⁺ cations. In the case of copolymers the effect of the metal cations on the fluorescence intensity is negligible.     

过渡金属催化的6-苯基-5,6-二氢-2H-吡喃-2-酮的合成——推荐一个大学有机化学综合实验

有机合成中,碳-碳键的形成和断裂是一个永恒的热门话题,科学家为此发展了很多形成碳-碳键的方法。在这一领域,诞生了不少诺贝尔化学奖的成果,格氏反应和烯烃复分解反应就是其中的经典案例。烯烃复分解反应提供了一种连接sp2-碳和sp2-碳的全新思路,发展出了一些活性分子全合成的高效路径。因而,2005年的诺贝尔化学奖授予了对烯烃复分解反应有杰出贡献的三位科学家。本有机化学综合实验由三个反应构成,包括改进的格氏反应、DMAP催化的酯化反应和关环烯烃复分解反应。每一个反应都可独立成为一个基础有机化学实验,三步的连续反应可以作为一个综合多步合成实验。本实验有助于理解有机合成的过程和机理,体验有机合成的魅力。