Parallel synthesis of 1,3-dihydro-1,4-benzodiazepine-2-ones employing catch and release

An efficient solid-phase method has been developed for the parallel synthesis of 1,3-dihydro-1,4-benzodiazepine-2-one derivatives. A key step in this procedure involves catching crude 2-aminobenzoimine products 4 on an amino acid Wang resin 10. Mild acidic conditions then promote a ring closure and in the same step cleavage from the resin to give pure benzodiazepine products 12. The 2-aminobenzoimines 4 can be synthesized from either 2-aminobenzonitriles 1 and Grignard reagents 2 or from iodoanilines 5 and nitriles 7 allowing a range of diversification. Further diversification can be introduced to the benzodiazepine products by N-alkylation promoted by a resin bound base and alkylating agents 13.     

Solid-phase synthesis and utilization of side-chain reactive unnatural amino acids

Alkylation of the benzophenone imine of glycine Wang resin with α,ω-dihaloalkanes yielded valuable reactive intermediates. These racemic ω-chloro or ω-bromo intermediates were converted to α-amino acids containing diverse side-chain functionalities (e.g. ω-chlorides, nitriles, and thioethers), proline and its ring homologs, and 1-aminocycloalkanecarboxylic acid derivatives.     

Microwave Synthesis of 5-Substituted 1H-Tetrazoles Catalyzed by Bismuth Chloride in Water

Bismuth chloride was used to catalyze the [2 + 3] cycloaddition between sodium azide with aryl nitriles, aliphatic nitriles, and vinyl nitriles. A number of 5-substituted 1H-tetrazoles were synthesized in water or isopropanol/water mixtures using microwave heating. Good yields were obtained for these reactions when heated for 1 h at 120–160 °C in a 3:1 isopropanol/water mixture. A few of the less reactive nitriles required longer reaction times for good yields.     

An Efficient Method for the Preparation of Nitriles via the Dehydration of Aldoximes with Phthalic Anhydride

A new and highly efficient method for the conversion of aldoximes to nitriles was established. By fusing with phthalic anhydride, aldoximes were efficiently and smoothly converted into nitriles, in high yields (over 85%) and in a short time (within 5 minutes). The mixture of phthalic anhydride, a cyclic anhydride, and aldoximes in fusing state set up an ideal transition state for a selective [3.3]‐sigmatropic rearrangement of the acylated aldoximes to nitriles.     

催化转移氢化还原腈类化合物成胺

本文报道了在碱性条件下, 用水合肼处理氯化镍(NiCl2.6H2O)得到活性镍催化剂, 不经分离直接用于催化转移氢化还原腈类化合物成胺。方法温和简便, 收率中等(35～82%)。α, β-不饱和腈还原时收率较低(12～17%)。     

Simple and Highly Efficient Procedure for Conversion of Aldoximes to Nitriles Using N-(p-Toluenesulfonyl) Imidazole

A facile and efficient method for dehydration of aldoximes into nitriles using N-(p-toluenesulfonyl) imidazole (TsIm) is described. In this method, aldoximes were refluxed with TsIm in the presence of 1,8-diazabicyclo-[5.4.0]undec-7-ene (DBU) in dimethylformamide (DMF) to afford the corresponding nitriles in good yields. This methodology is highly efficient for various structurally diverse aldoximes including aromatic, heteroaromatic, and aliphatic oximes. A plausible mechanism for the conversion of aldoxime into nitriles using TsIm/DBU is explained.     

P(i-BuNCH2CH2)3N: an efficient ligand for the direct alpha-arylation of nitriles with aryl bromides

A new catalyst system for the synthesis of alpha-aryl-substituted nitriles is reported. The bicyclic triaminophosphine P(i-BuNCH(2)CH(2))(3)N (1b) serves as an efficient and versatile ligand for the palladium-catalyzed direct alpha-arylation of nitriles with aryl bromides. Using ligand 1b, ethyl cyanoacetate and primary as well as secondary nitriles are efficiently coupled with a wide variety of aryl bromides possessing electron-rich, electron-poor, electron-neutral, and sterically hindered groups.     

Copper-catalyzed cyanation of aryl iodide with the combined cyanide source of urea and DMSO

A simple copper-catalyzed cyanation of aryl iodide with the combination of urea and dimethyl sulfoxide as a cyanide source is achieved, providing nitriles in moderate to good yields. This new approach represents an exceedingly practical and safe method for the synthesis of aryl nitriles.     

Synthesis of Ketones with Alkyl Phosphonates and Nitriles as Acyl Cation Equivalent: Application of Dephosphonylation Reaction of β-Functionalized Phosphonate with Hydride

The preparation of several α-substituted ketones is performed in a one-pot procedure with alkyl phosphonates and aromatic nitriles by subsequent treatment of LiAlH₄. A new method for nitriles used as an acyl cation equivalent is described.     

Reduction of nitriles into aldehydes using a TMDS/V(O)(OiPr)3 reducing system

A simple and convenient method for the chemoselective reduction of nitriles into aldehydes using a 1,1,3,3-tetramethyldisiloxane (TMDS)/triisopropoxyvanadium(V) oxide reducing system is described. Aromatic as well as aliphatic nitriles are reduced into the corresponding aldehydes in moderate to good yields.     

Ruthenium/Imidazolylphosphine Catalysis: Hydrogenation of Aliphatic and Aromatic Nitriles to Form Amines

A convenient and efficient catalyst system for the hydrogenation of aliphatic nitriles towards the corresponding primary amines in high to excellent yields is presented. In addition, aromatic nitriles are reduced smoothly, too. The use of low catalyst loadings and molecular hydrogen make this protocol an attractive methodology.     

Copper-mediated cyanation of aryl halide with the combined cyanide source

A simple copper-mediated cyanation of aryl halide with the combination of ammonium bicarbonate and N,N-dimethylformamide as a cyanide source is achieved, providing nitriles in moderate to good yields. This new approach represents an exceedingly practical and safe method for the synthesis of aryl nitriles.     

Cobalt(III)-catalyzed cycloaddition polymerization of diynes with nitriles: Synthesis of polymers containing pyridine moieties in the main chain

The synthesis of pyridine-containing polymers was carried out by the cycloaddition of diynes with nitriles in the presence of organocobalt complexes as catalysts. As a model experiment, the pyridine-formation reaction of monofunctional acetylenes with nitriles was reexamined in detail in the presence of organocobalt catalysts, from which the combination of terminal aliphatic acetylenes and aromatic nitriles was proved to be suitable for the specific pyridine-formation process. On the basis of this result, the polymerization of terminal aliphatic diynes with aromatic nitriles was carried out in the presence of the cobalt catalyst (10 mol %) to give polymers containing substituted pyridine moieties in the main chain in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1979–1986, 1999     

Ionic liquid-promoted dehydration of aldoximes: a convenient access to aromatic, heteroaromatic and aliphatic nitriles

A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoximes using an ionic liquid, 1-pentyl-3-methylimidazolium tetrafluoroborate, [pmim]BF₄ under organic solvent-free condition, has been developed. A variety of aromatic, heteroaromatic and aliphatic aldoximes are converted to the corresponding nitriles. The ionic liquid is recovered and reused for subsequent reactions.     

Dehydration of Oximes to Nitriles Catalyzed by a Green Heteropolyacid Catalyst: Preyssler’s Anion, [NaP5W30O110]14－

A mild, simple and high yielding procedure for the direct conversion of oximes to nitriles has been developed using heteropolyacid in acetic acid. Aromatic and aliphatic aldoximes were converted to the corresponding nitriles in the presence of Preyssler type heteropolyacid, which could be reused several times without any appreciable loss of activity.     

A Sakurai-Prins-Ritter sequence for the three-component diastereoselective synthesis of 4-amino tetrahydropyrans

A simple one-pot procedure for the Sakurai-Prins-Ritter sequence allows rapid assembly of 4-acylamino-2,6-substituted tetrahydropyrans in high yields and with excellent diastereoselectivity from readily available 4-acetoxy-1,3-dioxanes, allylsilanes, and nitriles. A variety of nitriles have been shown to participate. Diastereoselectivities are uniformly high and observed stereochemistry of cation trapping proceeds according to Alder's model of the 4-tetrahydropyranyl cation.     

Highly Regioselective Conversion of Epoxides to β-Hydroxy Nitriles with Cyanide Exchange Resin

Abstract

A simple and regioselective method is described for the efficient conversion of epoxides to β-hydroxy nitriles using Amberlite IRA-400 supported cyanide. The reactions occur in the absence of catalyst and furnish the corresponding β-hydroxy nitriles in high yields.     

Practical CuCl/DABCO/4-HO-TEMPO-catalyzed oxidative synthesis of nitriles from alcohols with air as oxidant

A mild and efficient copper-catalyzed aerobic oxidative synthesis of nitriles directly from alcohols and aqueous ammonia with air as the terminal oxidant was disclosed. A variety of nitriles are obtained in good to excellent yields.     

A new method for the synthesis of nitriles enriched with the15N isotope

A new synthetic method for the preparation of¹⁵N-labeled nitriles from nonlabeled nitriles is proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 444–446, March, 1994.     

Hydroxide-catalyzed synthesis of heterocyclic aromatic amine derivatives from nitriles

A generalized method for synthesizing a wide variety of heterocyclic aromatic amine derivatives from nitriles by use of hydroxide catalysts is presented. Nitrile dimers (3-aminocrotononitrile and dicyandiamide) and a dimer analog (anthranilonitrile) react with monomeric nitriles in the presence of hydroxide to form respectively, aminopyrimidines, diaminotriazines and aminoquinazolines.