Performance of graphene Oxide/SiO2 Nanocomposite-based: Antibacterial Activity,dye and heavy metal removal

Nanocomposite materials have been successfully applied to remediation of organic and inorganic contaminants from polluted water. The present study investigates the synthesis, characterizations, and adsorptive performances of graphene oxide/SiO₂ nanocomposite-based adsorbent. Graphene oxide/SiO₂ was used for the adsorption of methylene blue (MB) and Cr (VI) ion from wastewater. Furthermore, the antibacterial activity performance of synthesized nanocomposite was studied. The adsorption consideration has been performed by various adsorption parameters in our laboratory. X-ray crystallography (XRD), Scanning electron microscope (SEM), Energy Dispersive X-ray Analysis (EDX) and, thermal gravimetric analysis (TGA) methods were applied in the characterization, morphological structure, crystallinity, and thermal stability of graphene oxide/SiO₂. Maximum capacities of adsorption of graphene oxide/SiO₂-based adsorbent had been evaluated by the Langmuir isotherm model for MB and Cr (VI) ion as 555.50 and 181.81 mg/g, respectively. Generally, adsorption experiments revealed that the performances of graphene oxide/SiO₂ nanocomposite for all adsorbents have been found in the order MB > Cr (VI). Furthermore, antibacterial activity study against gram-positive and gram-negative bacteria showed and proved that graphene oxide/SiO₂ composite showed a remarkable ability to kill bacteria.     

Adsorption of carbon dioxide on graphene oxide supported layered double oxides

Adsorption of CO₂ on layered double oxides supported on graphene oxide has been studied under dry and wet conditions. In the first exposure to the adsorptive gas, the isotherms obtained for supported and unsupported materials are shown to fit to the Freundlich model indicating the existence of heterogeneous adsorption sites. After multiple temperature-swing cycles, the adsorption capacity decreased and the data is better described by the Langmuir model. The presence of graphene oxide is shown to reduce the loss of adsorption capacity, and helps to maintain the heterogeneity of the basic sites on the adsorbents. The use of wet gas mixtures was found to have a positive effect on the CO₂ adsorption capacity of the graphene oxide hybrids. The presence of residual sodium on the materials resulted in a Freundlich isotherm with increased adsorption capacity.     

Optimization of heteroatom doped graphene oxide by deep eutectic solvents and the application for pipette‐tip solid‐phase extraction of flavonoids

In order to improve the permeation and adsorption properties of graphene oxide, heteroatoms and deep eutectic solvent were introduced in this study. After being modified, the structural properties of graphene oxide were improved and the materials were applied to the determination of myricetin and rutin in tea sample by pipette‐tip solid‐phase extraction method. The materials were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐Ray diffractomer, energy dispersive spectroscopy, atomic force microscope, and specific surface area by Brunauer–Emmett–Teller N₂ adsorption desorption analysis. Meanwhile, they were tested by static and dynamic adsorption. The result showed that the materials after modifying had better adsorption amount for myricetin and rutin than graphene oxide. The calibration graphs of myricetin and rutin in MeOH were linear over 0.10–500.00 µg/mL, and the limits of detection and quantification were in the range of 0.00546–0.0182 µg/mL and 0.00741–0.0247 µg/mL, respectively. A reliable analytical method was developed for recognition targets in tea sample by DES modified nitrogen‐doped graphene oxide with satisfactory extraction recoveries (myricetin 99.77%, rutin 98.14%). It was potential for the rapid purification of myricetin and rutin in tea sample combined with the pipette‐tip solid‐phase extraction.     

DNA adsorbed on graphene and graphene oxide: Fundamental interactions,desorption and applications

Interfacing DNA oligonucleotides with graphene-based materials, especially graphene oxide, has produced many new sensors and devices. Since graphene oxide is an excellent fluorescence quencher, fluorescently labeled DNAs (probes) are nearly fully quenched upon adsorption. Addition of the complementary DNA results in probe desorption and fluorescence enhancement. Aside from its analytical applications, this system provides a fascinating topic for biointerface science. DNA can be adsorbed by graphene oxide via π–π stacking and hydrogen bonding, while it must overcome electrostatic repulsion at the same time. The mechanism of DNA-induced probe desorption has also been a topic of extensive discussion. In this article, DNA adsorption and desorption reactions and interactions with graphene oxide and related materials (e.g. graphene) are reviewed based on the current understandings. A few representative applications based on these processes are also described briefly.     

氧化石墨烯-海藻酸钠-壳聚糖复合支架的制备及表征

通过冷冻干燥技术, 将不同量的氧化石墨烯与海藻酸钠和壳聚糖复合, 构建复合支架材料. 研究了不同的氧化石墨烯含量(质量分数0, 0.3%, 0.5%, 0.7%, 1%)对支架材料微观结构、 孔隙率、 溶胀比、 体外降解性能、 机械性能及生物相容性的影响, 以确定复合支架中最佳氧化石墨烯含量. 研究结果表明, 复合材料呈固态海绵状结构, 具有一定的形态可塑性; 扫描电子显微镜观察发现, 各组支架均为三维网状结构, 随着氧化石墨烯含量的增加, 孔隙尺寸逐渐降低, 孔壁厚度增加, 孔隙尺寸在140~240 μm之间; 随氧化石墨烯含量的增加, 复合支架溶胀比和体外降解速率逐渐降低, 而机械强度明显增强; 体外细胞毒性显示, 当氧化石墨烯质量分数为0.3%时, 细胞存活率最高, 而当氧化石墨烯含量增高时, 细胞活性会被明显抑制, 造成细胞死亡. 因此, 氧化石墨烯在复合支架中最佳含量为0.3%.     

Preparation of an Anti-Aggregation Silica/Zinc/Graphene Oxide Nanocomposite with Enhanced Adsorption Capacity

Nanomaterials play a significant role in adsorption treatment of dye wastewater, but irreversible aggregation of nanoparticles poses a significant problem. In this work, nanomesoporous zinc-doped silicate (NMSZ) was prepared by an in situ method. To prevent agglomeration, NMSZ was covalently bonded to graphene oxide (GO) sheets to form a nano-silica/zinc/graphene oxide composite (GO-NMSZ), aimed at removal of cationic dye methylene blue (MB). For comparison, undoped mesoporous silica (MS) was also synthesized and modified to obtain a silica/graphene oxide composite (GO-MS). The materials were characterized by powder XRD, SEM, FTIR spectroscopy, TEM, nitrogen sorption, and X-ray photoelectron spectroscopy (XPS). Preservation of the oxygen-containing groups of GO in the composites led to higher adsorption capacities. The best GO-NMSZ composite exhibited an enhanced adsorption capacity of 100.4 mg g⁻¹ for MB compared to those of undoped GO-MS (80.1 mg g⁻¹) and nongrafted NMSZ (55.7 mg g⁻¹). The nonselective character of GO-NMSZ is demonstrated by effective adsorption of anionic dye Congo red (127.4 mg g⁻¹) and neutral dye isatin (289.0 mg g⁻¹). The adsorption kinetics, adsorption isotherms, and a thermodynamic study suggested that MB adsorption occurs by chemisorption and is endothermic in nature.     

Preparation of different graphene nanostructures for hydrogen adsorption

In this study, different types of graphene were synthesized to investigate hydrogen adsorption capacity at different pressures (0–34 bar) at room temperature (298 K). Graphene and nanoporous graphene were prepared by Chemical Vapor Deposition (CVD) method, using methane as a carbon source at a temperature of 900 °C over copper plates and nickel oxide nanocatalyst. The nickel oxide nanocatalyst was prepared by sol–gel method, whereas graphene oxide was prepared through modified Hummer's method. The products were characterized by X‐ray diffraction, field emission‐scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller and Raman spectroscopy. The adsorption of hydrogen was done by volumetric method. High adsorption capacity was achieved in nanoporous graphene because of its high pore volume (2.11 cm³/g) and large specific surface area (850 m²/g). Hydrogen adsorption values for nanoporous graphene, graphene and graphene oxide were determined as 2.56, 1.70 and 0.74 wt%, respectively. In addition, the hydrogen adsorption of graphene nanostructures fitted nicely to the selected two‐parameter and three‐parameter adsorption isotherm models. The adsorption isotherm model coefficients have been found for a 0–34 bar pressure range. The parameter values for all adsorbents showed proper conformity to the model and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

氧化石墨烯吸附亚甲基蓝的分子动力学模拟

采用分子动力学方法研究了亚甲基蓝在不同氧化度的氧化石墨烯表面的吸附行为及其动力学性质, 从微观角度讨论了亚甲基蓝由体相到氧化石墨烯表面的吸附过程及主要作用机制, 并通过亚甲基蓝分子动力学性质解释了氧化石墨烯的氧化度和含氧官能团类型对吸附行为的影响. 结果表明, 吸附过程中, 亚甲基蓝主要受氧化石墨烯表面含氧官能团的静电作用, 以近似垂直氧化石墨烯表面的方向进入, 并以平行的方式吸附于氧化石墨烯表面; 亚甲基蓝不易脱离高氧化度氧化石墨烯的吸附位点; 吸附平衡过程中, 相对于低氧化度的氧化石墨烯, 高氧化度氧化石墨烯对亚甲基蓝的束缚性更强, 同时与亚甲基蓝间相互作用更强; 含氧官能团中的环氧基与亚甲基蓝间的作用势能更强, 且羟基能够与亚甲基蓝间形成氢键结构, 共同保障了亚甲基蓝吸附层的稳定性.     

Highly Porous Hydroxyapatite/Graphene Oxide/Chitosan Beads as an Efficient Adsorbent for Dyes and Heavy Metal Ions Removal

Dye and heavy metal contaminants are mainly aquatic pollutants. Although many materials and methods have been developed to remove these pollutants from water, effective and cheap materials and methods are still challenging. In this study, highly porous hydroxyapatite/graphene oxide/chitosan beads (HGC) were prepared by a facile one-step method and investigated as efficient adsorbents. The prepared beads showed a high porosity and low bulk density. SEM images indicated that the hydroxyapatite (HA) nanoparticles and graphene oxide (GO) nanosheets were well dispersed on the CTS matrix. FT-IR spectra confirmed good incorporation of the three components. The adsorption behavior of the obtained beads to methylene blue (MB) and copper ions was investigated, including the effect of the contact time, pH medium, dye/metal ion initial concentration, and recycle ability. The HGC beads showed rapid adsorption, high capacity, and easy separation and reused due to the porous characteristics of GO sheets and HA nanoparticles as well as the rich negative charges of the chitosan (CTS) matrix. The maximum sorption capacities of the HGC beads were 99.00 and 256.41 mg g⁻¹ for MB and copper ions removal, respectively.     

Glycine‐functionalized reduced graphene oxide for methylene blue removal

Glycine‐functionalized reduced graphene oxide (GRGO) was prepared through the reaction of glycine and chlorine‐functionalized reduced graphene oxide. The product was characterized by SEM, HRTEM, IR, Raman, and XPS. The nitrogen content (8.28%) was high in product, peak at 285.8 eV was assigned to the C–N bond, which implied that the chlorine residues in raw material were substituted by amine group of glycine. The intensity ratio of D and G peak was about 1.5, which also implied that more saturated carbon atoms were present in the product. Results of SEM, IR, and XPS confirmed that glycine molecules were attached to graphene sheets. Compared with reduced graphene oxide (61.5 mg/g) and active carbon (45.2 mg/g), GRGO had a good adsorption capacity (98.9 mg/g) for methylene blue. The adsorption process was fitted to three kinetic models and three adsorption isotherm models. The adsorption process complied with pseudo‐second order kinetic model and Langmuir model.     

Purification of Wastewater Using a Highly Porous Metal-Organic Framework and Graphene-like Materials—A Preliminary Study

ABSTRACT

Water contamination by toxic metals through the discharge of industrial wastewater is a worldwide environmental problem. Heavy metals are currently regarded as important pollutants, becoming a severe public health problem. The adsorption from aqueous solutions of trace metals using metal-organic framework, graphene oxide, or partially reduced graphene oxide was characterized by batch measurements. The choice of these materials was made based on their high surface areas, controlled porosities, and the ability to vary the surface hydrophilicity. These materials were prepared by modified standard protocols to meet project requirements. The adsorption potential of these materials was characterized for several metals.     

Water treatment: functional nanomaterials and applications from adsorption to photodegradation

Global efforts for engineering desired materials which are able to treat the water sources still are ongoing in the bench level methods. Considering adsorbent and photocatalytic materials as the main reliable candidates still are encountering with struggles because of many challenges that restrict their large-scale application. This review comprehensively considered the recent advanced materials water treatment methods which involve to magnetic, activated carbon, carbon nanotubes (CNTs), graphene (G), graphene oxide (GO), (Graphene) quantum dots, carbon nanorods, carbon nano-onions, and reduced graphene oxide (RGO), zeolite, silica and clay-based nanomaterials. The adsorption and photocatalytic properties of these nanomaterials introduced them as highly potent option for heavy metal ions and organic dyes removal and photocatalytic degradation. High specific surface area in conjugation with presenting higher kinetics of adsorption and decomposition are the main characteristics of these materials which make them appropriate to treat wastewater even in ultralow concentration of the pollutants. Considering the mechanistic aspects of the adsorption and photocatalytic decomposition process, challenges and opportunities were other subjects that have been highlighted for the discussed nanomaterials. In term of the adsorption approaches, the mechanism of adsorptions and their influence on the maximum adsorption capacity were discussed and also for photocatalyst approach the radical active spices and their role in kinetic and efficiency of the organic pollutant decomposition were provided a deep discussion.     

Deep eutectic solvents skeleton typed molecularly imprinted chitosan microsphere coated magnetic graphene oxide for solid‐phase microextraction of chlorophenols from environmental water

Novel molecularly imprinted chitosan microspheres were prepared on the surface of magnetic graphene oxide, with deep eutectic solvents both as a functional monomer and template. The prepared molecularly imprinted chitosan microspheres‐magnetic graphene oxide was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, Brunauer‐Emmett‐Teller surface area, thermogravimetric analysis were subsequently combined with solid‐phase micro‐extraction for simultaneous separation and enrichment of the extraction of chlorophenols from environmental water. Factors affecting the extraction efficiency of chlorophenols were optimized using response surface methodology. The actual extraction capacities under the optimal conditions (liquid to solid ratio = 3, cycles of adsorption/desorption = 5, 40°C extraction temperature, and extraction time for 35 min) were 86.90 mg/g. Compared to the traditional materials, the molecularly imprinted chitosan microspheres‐magnetic graphene oxide produced higher selectivity and extraction capacity.     

还原态氧化石墨烯对Zn(Ⅱ)的吸附动力学与热力学

以乙二胺(EDA)还原氧化石墨烯(GO)制得一种吸附材料,即还原态氧化石墨烯(RGO)。 采用批量平衡法研究了RGO对Zn(Ⅱ)的吸附动力学与热力学,利用Lagergren准一级及准二级动力学方程、Langmuir和Freundlich等温方程对实验数据进行了拟合分析。 研究结果表明,Lagergren准二级吸附动力学模型能够较好地描述实验结果,表明该吸附过程以化学吸附为主。 RGO的吸附在所研究的Zn(Ⅱ)浓度范围内更符合Langmuir等温吸附经验式,ΔH0=-21.60 kJ/mol,吸附焓变小于零,表明该吸附为放热过程;吸附吉布斯自由能变化ΔG0为正值,表明该吸附是一个非自发的过程。     

Fe2O3/rGO纳米复合物的制备及其储锂和储钠性能

金属氧化物可通过电化学转换反应与锂离子及钠离子发生多电子可逆结构转换,是一类极具应用前景的高容量锂离子和钠离子电池负极材料。实验以氧化石墨烯和铁盐为前驱体,采用简单的溶剂法,成功将Fe₂O₃纳米单晶粒子均匀负载于石墨烯的导电片层上,获得Fe₂O₃/rGO(还原氧化石墨烯)纳米复合材料。复合电极在锂离子和钠离子电池中都表现出优异的充放电性能和循环稳定性。实验结果表明石墨烯的包覆不仅能降低Fe₂O₃发生转换反应的电荷传递阻抗,而且能够稳定电极在循环过程中带来的结构转变,极大改善电极大电流充放能力和循环稳定性。本研究为发展高容量的锂离子和钠离子电池负极材料提供了可行的途径。     

还原态氧化石墨烯的制备及其对重金属离子的吸附性能

通过乙二胺（EDA）对氧化石墨烯（GO）进行还原制备了还原态氧化石墨烯（RGO）,利用红外光谱、拉曼光谱、热重分析和扫描电子显微镜等技术对制得的RGO进行了表征。 考察了RGO复合材料在静态吸附条件下对Pb(Ⅱ)、Cd(Ⅱ)、Cu(Ⅱ)和Mn(Ⅱ)金属离子的吸附性能。 结果表明,该吸附材料对上述4种重金属离子在25 ℃时的静态饱和吸附量分别为396.6、115.3、54.2和38.6 mg/g。 吸附于RGO上的Pb(Ⅱ)可用0.05 mol/L HCl溶液进行洗脱,再生后的RGO重复使用3次时吸附量能达到首次吸附量的85%。     

The Effects of Hydrophobicity and Textural Properties on Hexamethyldisiloxane Adsorption in Reduced Graphene Oxide Aerogels

To expand the applications of graphene-based materials to biogas purification, a series of reduced graphene oxide aerogels (rGOAs) were prepared from industrial grade graphene oxide using a simple hydrothermal method. The influences of the hydrothermal preparation temperature on the textural properties, hydrophobicity and physisorption behavior of the rGOAs were investigated using a range of physical and spectroscopic techniques. The results showed that the rGOAs had a macro-porous three-dimensional network structure. Raising the hydrothermal treatment temperature reduced the number of oxygen-containing groups, whereas the specific surface area (S_BET), micropore volume (V_micro) and water contact angle values of the rGOAs all increased. The dynamic adsorption properties of the rGOAs towards hexamethyldisiloxane (L2) increased with increasing hydrothermal treatment temperature and the breakthrough adsorption capacity showed a significant linear association with S_BET, V_micro and contact angle. There was a significant negative association between the breakthrough time and inlet concentration of L2, and the relationship could be reliably predicted with a simple empirical formula. L2 adsorption also increased with decreasing bed temperature. Saturated rGOAs were readily regenerated by a brief heat-treatment at 100 °C. This study has demonstrated the potential of novel rGOA for applications using adsorbents to remove siloxanes from biogas.     

Poly(amidoxime)-reduced graphene oxide composites as adsorbents for the enrichment of uranium from seawater

The development of efficient materials for high extraction of uranium(UO22+) from seawater is critical for nuclear energy. Poly(amidoxime)-reduced graphene oxide(PAO/rGO) composites with excellent adsorption capability for UO22+ were synthesized by in situ polymerization of acrylonitrile monomers on GO surfaces, followed by amidoximation treatment with hydroxylamine. The adsorption capacities of PAO/rGO composites for UO22+ reached as high as 872 mg/g at pH 4.0. The excellent tolerance of these composites for high salinity and their regeneration-reuse properties can be applied in the nuclear-fuel industry by high extraction of trace UO22+ ions from seawater.     

Preparation of graphene oxide–chitosan composite and adsorption performance for uranium

The composite adsorbent graphene oxide–chitosan was prepared using graphite and chitosan as the initial materials. The structures and morphology of the products were characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy. The products were used to remove uranium from aqueous solution by batch adsorption experiments. The effects of pH, adsorbent dosage, contact time, initial uranium concentration and temperature on the uranium removal were investigated, and the results were fitted by the adsorption isotherm models. The adsorption kinetic and thermodynamic were also studied in detail.     

Synthesis and Electrochemical Performance of Co3O4/Graphene

Co3O4/reduced graphene oxide composites were synthesized via a simple electrochemical method from graphene oxide and Co（NO3）2·6H2O as raw materials.Co3O4 nanoparticles with sizes of around 30-50 nm were distributed on the surface of graphene nanosheets confirmed by scanning electron microscopy and transmission electron microscopy.Electrochemical properties of Co3O4/graphene composite were tested by cyclic voltammetry,galvanostatic charge-discharge,and electrochemical impedance spectroscopy.The Co3O4/reduced graphene oxide composite was used as the pseudocapacitor electrode in the 2 mol/L NaOH aqueous electrolyte solution.The Co3O4/reduced graphene oxide composite electrode exhibited a specific capacitance of 357 F/g at a current density of 0.5 A/g in a three-electrode system.72％ of capacitance was retained when the current density increased to 3 A/g.The Co3O4/reduced graphene oxide composite prepared electrodes show a high rate capability and excellent long-term stability.After 1000 cycles of charge and discharge,the capacitance is still maintained 87％ at a current density of 1 A/g,indicating that the composite is a oromising alternative electrode material used for supercapacitors.