Novel copolymer networks via the combination of polyaddition and anionic polymerization

A two‐step synthetic route to novel copolymer networks, consisting of polymethacrylate and polyacetal components, was developed by combining the polyaddition and anionic polymerization techniques. The functional polymethacrylates containing hydroxyl or vinyloxyl side groups were used as crosslinkers. They were anionically synthesized as follows: the copolymer of 2‐hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) was prepared by the anionic copolymerization of 2‐(trimethylsiloxy)ethyl methacrylate and MMA, followed by hydrolysis. The copolymer poly(HEMA‐co‐MMA) thus obtained possessed a hydroxyl group in each of its HEMA units. Another kind of vinyloxyl‐containing (co)polymer was prepared by the anionic homopolymerization of 2‐(vinyloxy)ethyl methacrylate (VEMA) or its copolymerization with MMA. The resulting (co)polymer possessed reactive vinyloxyl side groups. The copolymer networks were obtained by reacting each of the above‐mentioned (co)polymers with a polyacetal prepared via the polyaddition between a divinyl ether and a diol. Three divinyl ethers (ethylene glycol divinyl ether, 1,4‐butanediol divinyl ether, and 1,6‐hexanediol divinyl ether) and three diols (ethylene glycol, 1,4‐butanediol, and 1,6‐hexanediol) were employed as monomers in the polyaddition step, and their combinations generated nine kinds of polyacetals. When a polyaddition reaction was terminated with a divinyl ether monomer, a polyacetal with two vinyloxyl end groups was obtained, which could further react with the hydroxyl groups of poly(HEMA‐co‐MMA) to generate a copolymer network. On the other hand, when a diol was used as terminator in the polyaddition, the resulting polyacetal possessed two hydroxyl end groups, which could react with the vinyloxyl groups of poly(VEMA) or poly(VEMA‐co‐MMA), to generate a copolymer network. All the copolymer networks exhibited degradation in the presence of acids. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 117–126, 2001     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004     

Copolymerization of glycols with the divinyl ether of n-acetyldiethanolamine

Conclusions The migration copolymerization of the divinyl ether of N-acetyldiethanolamine and a number of glycols to give polyether amines containing acetal groups was investigated.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2577–2578, November, 1969.     

Room temperature cross-linkable gel polymer electrolytes for lithium ion batteries by in situ cationic polymerization of divinyl ether

We demonstrated room temperature cross-linkable gel polymer electrolytes (GPE) prepared by in situ cationic polymerization of tri(ethylene glycol) divinyl ether (TEGDVE) with LIBF₄ that yields protonic acid and Lewis acid as an acidic initiating system by the reaction with water as an impurity in the liquid electrolyte. FTIR analysis reveals that TEGDVE in the liquid electrolyte is successfully polymerized into gel polymer electrolyte. The resulting gel polymer electrolyte showed promising electrochemical properties including ionic conductivity, wide range in working potential and stable cycle performance as a lithium ion conducting medium.     

New network copolymers of 1-vinyl-1,2,4-triazole as efficient sorbents of mercury

The possibility of preparing copolymers by radical copolymerization of 1-vinyl-1,2,4-triazole with divinyl sulfide and divinyl diethylene glycol ether in the bulk was examined. The sorption characteristics of the new cross-linked copolymers with respect to mercury(II) ions under static conditions in acid solutions were studied.     

一种新型深紫外正型光致抗蚀剂材料的研究

通过松香酸和丙烯酸的Diels-Alder反应得到了一种二酸——丙烯海松酸.丙烯海松酸有大的脂环结构和良好的成膜性,在固体膜层中,它可以和二乙烯基醚,如1,3-二乙烯氧基乙氧基苯,在加热条件下(80℃以上)发生反应,产物在稀碱水中难溶.这样形成的产物在光产酸剂产生的强酸催化下,在温度高于100℃时,可以迅速分解,从而变成稀碱水易溶.因此,用此二酸、二乙烯基醚和产酸剂可组成一种正型的光致抗蚀剂,当用254 nm的低压汞灯曝光时,其感度在30 mJ/cm²以下.     

Living/controlled cationic cyclopolymerization of divinyl ether with a cyclic acetal moiety: Synthesis of poly(vinyl ether)s with high glass transition temperature based on incorporation of cyclized main chain and cyclic side chains

Cationic cyclopolymerization of 2‐methyl‐5,5‐bis(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a divinyl ether with a cyclic acetal group, was investigated with the HCl/ZnCl₂ initiating system in toluene and methylene chloride at ?30 °C. The reaction proceeded quantitatively to give gel‐free, soluble polymers in organic solvents. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion, and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that the polymerization proceeded in living/controlled manner. The contents of the unreacted vinyl groups in the produced soluble polymers were less than ～3 mol %, and therefore, the degree of cyclization was determined to be ～97%. In contrast, the pendant cyclic acetal groups remained intact in the polymers under the present cationic polymerization conditions. These facts show that cyclopolymerization of 1 almost exclusively occurred and the poly(vinyl ether)s with the cyclized repeating units and cyclic pendant acetal rings were obtained. Glass transition temperature (T_g) and thermal decomposition temperature (T_d) of poly( 1 ) (M_n = 7870, M_w/M_n = 1.57) were found to be 166 and 338 °C, respectively, indicating that poly( 1 ) had high T_g and high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 952–958, 2010     

乳液聚合法制备聚合物与十二醇复合乳胶粒

通过乳液聚合法, 以苯乙烯、丙烯酸丁酯为主要单体, 以甲基丙烯酸为功能性单体, 以二乙烯基苯或二甲基丙烯酸乙二醇酯为交联剂, 制备了包覆有十二醇的聚合物复合颗粒. 通过动态光散射粒径仪和透射电镜观测乳胶粒粒径和形态, 气相色谱法测试了十二醇的包覆率, 并探讨了聚合过程中十二醇包覆率的变化情况. 结果表明十二醇的包覆率和十二醇与单体的质量比及单体转化率显著相关, 并且在聚合过程中包覆率存在先升后降的趋势. 实验发现十二醇包覆率的先升后降是由聚合物和十二醇的相容性不好引起的.     

Humic acid particle embedded super porous gum Arabic cryogel network for versatile use

Super porous gum Arabic (GA) cryogels were synthesized by crosslinking of natural GA with divinyl sulfone at cryogenic conditions, −20°C for potential biomedical applications. Humic acid (HA) nanoparticles were also prepared by using degradable and biocompatible crosslinkers such as trimethylolpropane triglycidyl ether, poly(ethylene glycol) diglycidyl ether, and trisodium trimetaphosphate in a single step and then entrapped within GA cryogel network as GA/HA particle cryogel. Furthermore, GA/HA cryogel was used as a template for Ag, Cu, and Fe nanoparticle preparation, and their antimicrobial properties were tested against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis strains. The minimum inhibition concentration values of Ag and Cu nanoparticle‐loaded GA/HA cryogel composites were determined as 10 mg mL⁻¹. Furthermore, the blood compatibility tests such as hemolysis and blood clotting indexes were determined for GA cryogels and found to be more compatible with 0.08 ± 0.01% hemolysis and 89.4 ± 6.1 blood clotting values, whereas the hemolysis of the Ag, Cu, and Fe nanoparticle‐loaded GA/HA Ag, Cu, and Fe metal nanoparticle cryogel composites decreased in the order of Fe > Cu > Ag nanoparticles.     

不同交联剂对甲基丙烯酸-β-羟乙酯/E-51双甲基丙烯酸酯聚合物水凝胶性能的影响

以水溶性单体甲基丙烯酸-β-羟乙酯(HEMA)与大分子交联剂E-51双甲基丙烯酸酯(E-51-DMA)(质量比HEMA/E-51-DMA=90/10)为主要原料,分别引入了5种小分子交联剂:N,N′-亚甲基双丙烯酰胺(MBA)、二乙烯基苯(DVB)、双甲基丙烯酸乙二醇酯(EDMA)、1,1,1-三(丙烯酰氧甲基)丙烷(TAP)和2,2,2-三(丙烯酰氧甲基)乙醇(TAE),采用本体聚合方法合成了5个系列的聚合物水凝胶.研究了小分子交联剂的类型及用量对水凝胶溶胀性能、杨氏模量以及有效交联密度ve和聚合物-水相互作用参数χ的影响,并比较了不同交联剂的交联效率.结果表明,随着小分子交联剂用量的增大,水凝胶平衡含水量EWC逐渐降低,聚合物体积分数2逐渐增大,反映聚合物网络结构的有效交联密度ve以及热力学参数聚合物-水相互作用参数χ值也随之增大.通过理论交联密度和有效交联密度的线性拟合,得到所选用的5种小分子交联剂在E-51-DMA10/HEMA90水凝胶体系中的交联效率,其顺序为DVB>EDMA>TAE>MBA≈TAP.     

Thiol-Ene Cationic and Radical Reactions: Cyclization,Step-Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2′-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Copolymerization of divinyl monomers with maleic and fumaric acid derivatives

The process of formation of reticular copolymer molecular structures produced in free radical copolymerization of divinyl monomers (divinyl ethers of diethylene glycol and hydroquinone, divinyl sulfide, p-divinylbenzene, etc.) with maleic and fumaric acid derivatives is studied. The basic factor that determines the features of molecular and network structures of copolymers is reactivity of the divinyl monomer in copolymerization with monovinyl monomer. The network of copolymers of maleic anhydride with the divinyl ether of hydroquinone is formed out of oligomer microgels. Divinyl sulfide in copolymerization with maleic acid is disposed to cyclocopolymerization; also crosslinking reactions occur. Formation of a network structure of copolymers of divinylbenzene with maleic and fumaric acid derivatives is shown to proceed via an alternating copolymerization mechanism. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 371–378, 1998     

Thiol‐Ene Cationic and Radical Reactions: Cyclization,Step‐Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol‐ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step‐growth polymerization between a dithiol and divinyl ether. p‐Toluenesulfonic acid (PTSA) induced a cationic thiol‐ene reaction to generate a thioacetal in high yield, whereas 2,2′‐azobisisobutyronitrile resulted in a radical thiol‐ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high‐dilution conditions, the cationic and radical reactions resulted in 16‐ and 18‐membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step‐growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Separation of divinyl ether fatty acid isomers by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method has been developed for the direct resolution of divinyl ether type of hydrophobic fatty acid isomers. The fatty acid isomers resolved include colneleic acid (CL), colnelenic acid (CLn), 14(Z)-etheroleic acid (14(Z)-EL), 14(Z)-etherolenic acid (14(Z)-Eln), 11(Z)-etheroleic acid (11(Z)-EL), 11(Z)-etherolenic acid (11(Z)-Eln), etheroleic acid (EL) and etherolenic acid (Eln). These fatty acid isomers differ in number, position and spatial arrangement of the double bonds and the position of the ether oxygen. A central composite design was employed for the optimization of the key variables of the separation, namely the concentrations of sodium dodecyl sulfate (SDS) and organic modifiers. The use of micelles combined with an organic modifier in the background electrolyte made it possible to dissolve and separate relatively hydrophobic fatty acid isomers, and to achieve high separation efficiency. Using heptakis-(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-beta-CD) as a buffer additive, complete separation of the examined eight divinyl ethers was achieved. Separation efficiencies up to 5 x 10(5) theoretical plates/m were achieved under optimized conditions. Direct UV was applied for detection of the fatty acids. The results were compared with those obtained from high-performance liquid chromatography (HPLC) separation.     

Allyl endcapped polyethylene oxide crosslinkers and their use in superabsorbents

Several new crosslinkers have been synthesized for evaluation in superabsorbent polymers. These crosslinkers are allyl endcapped polyethylene glycols (PEG) of 200, 600, and 3400 molecular weight. A branched polyethylene oxide of 600 molecular weight, initiated with glycerin, was also synthesized as a trifunctional crosslinker. The allyl functionality was chosen because it is less reactive during radical polymerization than acrylate crosslinkers, an attribute that was necessary to achieve a more uniform gel network. A synthesis route was devised to make the crosslinkers in high purity and yield. The purity of the crosslinkers was determined by ¹³C NMR, liquid chromatography, and size exclusion chromatography. Gels that were produced with the allyl crosslinkers gave excellent soluble polymer levels and swelling characteristics. The mechanism of incorporation of the allyl functionality was determined to be exclusively vinyl polymerization rather than through hydrogen abstraction. This was determined using NMR spectroscopy, monitoring the polymerization of a model system consisting of acrylic acid and allylacetate. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 799–806, 1997     

Silver recovery with complexing sorbents based on 1-vinyl-1,2,4-triazole

The sorption activity of copolymers based on 1-vinyl-1,2,4-triazole toward silver ions was studied in relation to the copolymer structure and to the kind and concentration of acids. The copolymers were prepared by radical copolymerization of 1-vinyl-1,2,4-triazole with 1,1,3-trihydrotetrafluoropropyl methacrylate and divinylbenzene, with 1,1,3-trihydrotetrafluoropropyl methacrylate, methyl methacrylate, and N,N′-methylenebisacrylamide, with diethylene glycol divinyl ether, and with divinyl sulfide. The copolymers exhibit high sorption activity. They efficiently recover silver cations from acid solutions and behave as anion exchangers.     

Studies in Cyclocopolymerization. VII. Copolymerization of Chloromaleic Anhydride with Divinyl Ether

Chloromaleic anhydride was found to copolymerize with divinyl ether to form soluble copolymers of 1:1 composition, devoid of residual unsaturation. A bicyclic structure is proposed in which the polymer backbone consists only of divinyl ether units. The ease with which the copolymers underwent dehydrohalogenation suggests that the hydrogen and chlorine atoms on the anhydride unit are in a trans configuration as a result of a stepwise cycli-zation process.

Oxidation of the hydrolyzed, dehydrohalogenated copolymers afforded the corresponding vic-diol copolymers. The absence of a significant decrease in copolymer molecular weight upon periodic acid cleavage of the vic-diol copolymers supported the proposed structure. Functional group analyses and softening points were in accord with the structures of the derived copolymers.     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

Novel and chemoselective dehydrogenation of 2-substituted imidazolines with potassium permanganate supported on silica gel

Various types of 2-imidazolines are efficiently oxidized to the corresponding imidazoles using potassium permanganate supported on silica gel under mild conditions at room temperature. 2-Alkylimidazolines are selectively converted to their corresponding imidazoles in the presence of 2-arylimidazolines. Chemoselective oxidation of 2-imidazolines in the presence of other oxidizable functional groups such as sulfide, ether, aldehyde, acetal, and THP ether was also achieved by this reagent system.     

Identification of ω-oxocarboxylic acids as acetal esters in aerosols using capillary gas chromatography-mass spectrometry

An homologous series of ω,ω-dimethoxycarboxylic acid methyl esters (acetal esters) has been identified in the most polar methyl ester fraction separated from remote aerosol samples by liquid chromatography. These compounds were separated by silica gel column chromatography and their structures determined by capillary gas chromatography (GC) and GC—mass spectrometry with a synthesized standard. The acetal esters are originally present in the samples as ω-oxocarboxylic acids, which are derivatized to acetal esters during treatment with boron trifluoride in methanol. This method enables the determination of ω-oxocarboxylic acids in environmental samples as their acetal esters.