Ion trap tandem mass spectrometry study of dexamethasone transformation products on light activated TiO2 surface

The photocatalytic transformation of dexamethasone and the formation of its intermediate compounds have been studied using titanium dioxide as a photocatalyst. The degradation of dexamethasone occurs easily through the formation of several hydroxy derivatives whose characterization has been made by HPLC/MS/MS. Even if both oxidative and reductive processes can be operating, only oxidative products have been identified in air saturated aqueous suspensions. A pattern of reaction pathways accounting for the observed intermediates is proposed. The obtained experimental evidence may be rationalized postulating the existence of a double initial mechanism. A single oxidation step resulting from the attack by one ·OH radical leading to the formation of five hydroxy-derivatives and a concomitant attack involving two ·OH radicals leading to the hydroxylation of the quinoid moiety of the molecule.     

Experimental and calculated complex formation curves for mixed, dynamic and semi-dynamic, metal–ligand systems.: A differential pulse polarographic study of Cu–sarcosine–OH and Cd–MIDA–OH systems at a fixed ligand to metal ratio and varied pH

The Cu–sarcosine–OH and Cd–MIDA–OH systems have been studied by differential pulse polarography (DPP) at a fixed total ligand to total metal concentration ratio and varied pH at 298 K and μ=0.5 mol dm⁻³ in the background of NaNO₃. Both the metal–ligand systems show initially dynamic (labile), followed by semi-dynamic behaviour on the DPP time scale. It has been shown that the experimental and calculated DPP complex formation curves used previously only for labile metal–ligand systems can be employed for the modelling of all species formed in a solution and optimisation of their stability constants. The stability constants of ML and ML₂ complexes as log β were estimated for Cu^II and Cd^II as 7.75±0.02, 14.49±0.01 and 6.67 ±0.02, 12.00±0.02, respectively (all known hydroxide species of copper and cadmium, including polynuclear species, were incorporated into the metal–ligand–OH systems). The formation of the complex CuL₂(OH) is suggested also and its stability constant as log β has been estimated to be 16.2±0.2. Results reported here seem to be reasonable when compared with the literature data reported at 298 K and different ionic strengths.     

Zirconium tungstate hydroxide hydrate revisited: Crystallization dependence on halide and hydronium ions

The formation of zirconium tungstate hydroxide hydrate, a precursor to the negative thermal expansion material cubic zirconium tungstate, shows a strong dependence on hydrothermal reaction conditions. It was found that not only the acid concentration, but also the acid counterion plays a significant role in the crystallization of ZrW₂O₇(OH)₂·2H₂O. High temperatures, high acid concentrations, and the presence of chloride or bromide ions promote the formation of well-crystallized ZrW₂O₇(OH)₂·2H₂O. For low acid concentrations, a new zirconium tungstate hydrate polymorph is observed, which transforms to tetragonal ZrW₂O₇(OH)₂·2H₂O at longer reaction times. A study of crystallization kinetics in hydrochloric acid is presented.     

Kinetics and thermodynamics of the attack of a phosphate ore by acid solutions at different temperatures

A calorimetric study of the kinetics and thermodynamics of the attack of a phosphate ore from Gafsa region (Tunisia) by phosphoric acid and by a mixture of phosphoric acid and sulfuric acids is undertaken at different temperatures. Two samples of the same ore having different grain size have been used. At 25 °C, the dissolution enthalpy in phosphoric acid solution equals −233.6 ± 2.2 J/g for both of the samples. Attack by the mixture of acids is strongly dependent on the solid granulometry. Interpretation of the calorimetric results by Avrami model shows the existence of three domains attributed to phosphate ore dissolution/H₂PO₄⁻ neutralisation, hemihydrate (HH) precipitation and hemihydrate/dihydrate (DH) transformation. The attack by the acid mixture was performed at higher temperatures and showed in addition the transitional formation of the anhydrous sulfate (AH) at T ≥ 55 °C, which transforms into dihydrate after the HH/DH transformation.     

Degradation of an ether–alcohol (3-ethoxypropan-1-ol) by photo-Fenton-generated <Superscript>•</Superscript>OH radicals: products analysis and formation pathways; relevance to atmospheric water-phase chemistry

We have chosen 3-ethoxypropan-1-ol (EtOPrOH) as a typical short-carbon-chain ether–alcohol used as industrial solvent and have analyzed the degradation products resulting from its attack by ^•OH radicals generated by the photo-Fenton reaction. The laboratory conditions were representative of those found in tropospheric water droplets. Twelve products have been identified by use of GC–MS analysis, either directly or after extraction by SPME fibers, and by HPLC–UV analysis with a special column for carboxylic acids and after reaction of carbonyl groups with 2,4-dinitrophenylhydrazine. These products contain one to three carbon atoms (instead of five in EtOPrOH), among which one or two are oxidized. According to the reaction pathways proposed, seven products—including methanal—can result from attack by one ^•OH only, three products imply attack by a second ^•OH, as expected from their higher oxidation number, and it is suggested that reaction between two organic radicals is needed for formation of only two products. The relevance of this investigation to the fate of EtOPrOH and similar ether–alcohols in the troposphere is briefly discussed.     

Formation of Cr(III) Hydroxides from Chrome Alum Solutions: 1. Precipitation of Active Chromium Hydroxide

The formation of active chromium hydroxide, Cr(OH)₃·3H₂O, was studied through potentiometric titrations and turbidimetric measurements. UV-Vis and IR spectroscopies were also employed to characterize the synthesized solid. The rapid addition of NaOH solution to aqueous chrome alum (KCr(SO₄)₂·12H₂O) solutions caused the immediate precipitation of the active material. Only monomeric Cr(III) species seemed to be participating in the precipitation process; neither chromium polymers nor complexes with anions (SO²⁻₄, Cl⁻, NO⁻₃, ClO⁻₄) influenced the fast formation of Cr(OH)₃·3H₂O. Titration studies allowed the determination of several hydrolysis and precipitation constants for Cr(III). Nevertheless, they cannot be used for the estimate of Cr(OH)⁰₃formation constant.     

Atmospheric Chemistry of Camphor

Rate constants have been measured at 296 ± 2 K for the gas‐phase reactions of camphor with OH radicals, NO₃ radicals, and O₃. Using relative rate methods, the rate constants for the OH radical and NO₃ radical reactions were (4.6 ± 1.2) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and <3 × 10⁻¹⁶ cm³ molecule⁻¹ s⁻¹, respectively, where the indicated error in the OH radical reaction rate constant includes the estimated overall uncertainty in the rate constant for the reference compound. An upper limit to the rate constant for the O₃ reaction of <7 × 10⁻²⁰ cm³ molecule⁻¹ s⁻¹ was also determined. The dominant tropospheric loss process for camphor is calculated to be by reaction with the OH radical. Acetone was identified and quantified as a product of the OH radical reaction by gas chromatography, with a formation yield of 0.29 ± 0.04. In situ atmospheric pressure ionization tandem mass spectrometry (API‐MS) analyses indicated the formation of additional products of molecular weight 166 (dicarbonyl), 182 (hydroxydicarbonyl), 186, 187, 213 (carbonyl‐nitrate), 229 (hydroxycarbonyl‐nitrate), and 243. A reaction mechanism leading to the formation of acetone is presented, as are pathways for the formation of several of the additional products observed by API‐MS. © 2000 John Wiley and Sons, Inc. Int J Chem Kinet 33: 56–63, 2001     

Pathways of advanced oxidation of phenol by Fenton's reagent—Identification of oxidative coupling intermediates by extractive acetylation

Homogeneous Fenton reaction (H₂O₂/Fe²⁺ system) using significantly substoichiometric concentrations of H₂O₂ oxidant to oxidize phenol was characterized focusing on the formation of stable aromatic intermediates. Beyond the most abundant benzenediols, the pattern of aromatic intermediates was chiefly characterized by hydroxylated biphenyls and diphenyl ethers with different degrees of hydroxylation. Hydroxylated dibenzofurans (DBF), p,p′-dioxins, as well as highly condensed aromatic intermediates including polyols of polycyclic aromatic hydrocarbons (PAHs), could also be detected, but in lower concentrations. The formation of aromatic intermediates could be predicted on the basis of oxidative coupling reactions of resonance-stabilized radicals generated by the attack of the highly reactive hydroxyl radicals (OH*) on phenol. GC/MS identification of oxidative coupling intermediates was performed after derivatization of the solvent extracts. Derivatization reactions included silylation to give TMS (trimethylsilyl) ethers, as well as single-step extractive acetylation using acetic anhydride in alkaline aqueous solutions (pH 10.5) to give acetates. Solvent extraction of aqueous solutions, a prerequisite to generate TMS ethers, caused strong discrimination of polyols due to their low distribution coefficients in non-polar solvents. This discrimination could be overcome by extracting the in-situ formed acetates of the intermediates. Extractive acetylation allowed the detection of tri-, tetra-, and penta-hydroxylated aromatic intermediates generated by Fenton oxidation processes, which have been overlooked upto now. Thus, extractive acetylation to detect stable aromatic intermediates covering a wide range of hydroxylation degrees can foster the understanding, monitoring, and management of advanced oxidation processes, especially in the field of wastewater treatment.     

Racemization on thermal degradation of poly( -lactide) with calcium salt end structure

Poly( -lactide) with calcium salt end structure (PLLA-Ca) is a promising material for PLLA recycling because of the ease of lactide recovery through the unzipping depolymerization process. However, the pyrolysis of PLLA-Ca also causes meso-lactide to form. In this article, the racemization in PLLA-Ca pyrolysis was analyzed in detail with Py-MS, Py-GC/MS, and a glass tube oven. The results suggested that at a temperature lower than 250 °C, nucleophilic attack by a carboxylate anion end on an asymmetrical methyne carbon in a penultimate lactate unit occurred, resulting in the predominant formation of meso-lactide. On the other hand, also at temperatures over 320 °C, by-reactions, such as enolization reactions, caused the meso-lactide to form, but not dominantly. In the temperature range of 250–320 °C, -lactide was produced exclusively, because unzipping depolymerization proceeded as the main reaction. This is a very significant result for PLLA recycling, because PLLA-Ca is an easily recyclable material, which depolymerizes based on the 1st-order weight loss process.     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Reversible photomagnetic properties of the molecular compound [{Cu(bipy)2}2{Mo(CN)8}]·9H2O·CH3OH

The optical and photomagnetic properties of [{Cu^II(bipy)₂}₂{Mo^IV(CN)₈}]·9H₂O·CH₃OH (1) have been reinvestigated. A comparison between spectra in solution and in the solid state revealed the presence of an intervalence band (or Metal–Metal Charge Transfer, hereafter noted MMCT) at 570 nm. The photomagnetic properties have been performed in a Superconducting QUantum Interference Device at 10 K with irradiation in the range of the MMCT: 488 nm, 520 nm and 647 nm at 10 K. An important increase of the magnetic signal has been measured after 1 h of irradiation at 488 nm, whereas a weaker increase has been obtained for the irradiation at 520 nm in the same conditions. Moreover, after an excitation at 488 nm, an irradiation at 647 nm has induced a decrease of the magnetic moment, which corresponds to a partial deexcitation. The complete characterization of the photoproduct has been realised after an irradiation of 4 h at 488 nm. The photomagnetic properties have shown an increase of the paramagnetism of 1 at low temperature. After a thermal heating at 300 K, the material goes back to its initial state before irradiation. It is the first time that a fully reversible photomagnetic behaviour for the compound [{Cu^II(bipy)₂}₂{Mo^IV(CN)₈}]·9H₂O·CH₃OH has been described. The observed properties have been discussed in terms of an electron transfer mechanism Mo → Cu.     

Characterization of atenolol transformation products in ozonation by using rapid resolution high-performance liquid chromatography/quadrupole-time-of-flight mass spectrometry

This experiment investigated the transformation pathway of atenolol, a widely used β-blocker, in the ozonation process through the identification of generated intermediate compounds. In order to characterize the contribution of ozone and hydroxyl radical (•OH) in the transformation of atenolol, ozonation were performed at pH 2, 7 and 9. 15 major transformation products have been identified based on the chromatographic behavior of these compounds and the information obtained from accurate mass MS and MS/MS spectra. By comparing to the elution pattern of the identified transformation products and its fragmentation pattern in the MS/MS spectrum, a variety of isomers of the transformation products were characterized.Identified transformation products of atenolol are including its mono-, di and tri-hydroxylated derivatives as well as the aliphatic and aromatic ring breakdown products. Transformation of atenolol in the ozonation involved hydroxylation reaction, aromatic ring opening reaction, oxidation and cleavage of 2-hydroxy-3-(isopropylamino)propoxy group of atenolol. In ozonation, aromatic ring of atenolol was transformed through the reaction with both ozone and •OH whereas the aliphatic chain of atenolol was degraded mainly through the reaction with •OH. The results also indicated that both •OH and ozone involved in the aromatic ring opening reaction.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Studies of organotin(IV)-orthoquinone systems

The primary process in the reaction of hexaphenylditin with various substituted orthoquinones (Q) is shown to involve attack by the quinone at a phenyl ligand. The intermediate thus formed decomposes to yield Ph₃Sn(SQ^·), where S(Q^·−) is the corresponding semiquinonate. Rearrangement of these species in solution gives rise to biradicals, while intramolecular electron transfer may lead to the formation and precipitation of Ph₂Sn(CAT), where CAT²⁻ is the corresponding substituted catecholate. The identification of these processes depends in part on electron paramagnetic resonance spectroscopy. The reaction of Ph₃SnCl or Ph₂SnCl₂ with Na(TBSQ^·) (TBSQ^·−=3,5-di-tert-butyl-orthobenzosemiquinonate) results in the formation of Ph₂Sn(TBSQ^·), which can undergo redistribution and intramolecular electron transfer, so that the solution chemistry of these latter systems is similar to that of the products of the Sn₂Ph₆+Q reaction.     

A pyrolysis-GC–MS investigation of poly(vinyl phenyl ketone)

The thermal decomposition process and pyrolysis products of poly(vinyl phenyl ketone) (PVPK) were investigated by thermogravimetric analysis (TGA) and on-line pyrolysis-gas chromatography–mass spectrometry (Py-GC–MS). TGA showed a largest weight loss rate around 380 °C. Py-GC–MS was used for the qualitative analysis of the pyrolysis products at 350, 500, 600, 700 and 850 °C. The major volatile thermal decomposition product was found to be 1-phenyl-2-propenone, which dominated all other volatile species especially under the least severe pyrolysis conditions (<600 °C). At higher temperatures a much wider range of pyrolysis products was obtained. The results have been interpreted assuming that primary random chain scission reactions occur followed by typical unzipping mainly producing monomer units; detachment of the side-group occurs only under more severe pyrolysis conditions. Py-GC–MS showed to be effective in PVPK detection in ink and paint formulations.     

Analysis of hydroxylated polybrominated diphenyl ether metabolites by liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry

Hydroxylated polybrominated diphenyl ether (OH‐PBDEs) metabolites have the potential to cause endocrine disruption as well as other health effects. Currently, gas chromatography/mass spectrometry (GC/MS) after derivatization is used for the analysis of OH‐PBDEs. However, there is a need for the direct analysis of OH‐PBDEs at relatively low concentrations in environmental and biological samples. Liquid chromatography with atmospheric pressure chemical ionization tandem mass spectrometry (LC/APCI‐MS/MS) was evaluated for the analysis of nine OH‐PBDEs, ranging from tri‐ to hexabrominated. Separation of the nine isomeric metabolites was achieved with reversed‐phase liquid chromatography, followed by detection by APCI‐MS in negative mode. Notably, a significant decrease in ionization was observed in 6‐hydroxyl‐substituted PBDE metabolites in the presence of an ortho‐substituted bromine, relative to the other hydroxylated metabolites. This is probably due to the formation of dioxins in the source as a result of the high‐temperature conditions, which prevented ionization by hydrogen abstraction. The MS/MS experiments also provided evidence of the neutral losses of HBr and Br₂, indicating the possible use of neutral loss scanning and selected reaction monitoring (SRM) for the screening of brominated metabolites in samples. The applicability of LC/APCI‐MS/MS was demonstrated for the analysis of metabolites of BDEs 47 and 99 formed in human liver microsomes. The LC/APCI‐MS/MS method was able to detect metabolites that had previously been identified by GC/MS following derivatization. Copyright © 2010 John Wiley & Sons, Ltd.     

Standard molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids

The standard (p = 0.1 MPa) molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids were derived from their standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of 2- and 3-cyanobenzoic acids. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and standard molar enthalpies for phase transition. The results obtained are −(150.7 ± 2.0) kJ · mol⁻¹, −(153.6 ± 1.7) kJ · mol⁻¹ and −(157.1 ± 1.4) kJ · mol⁻¹ for 2-cyano, 3-cyano and 4-cyanobenzoic acids, respectively. Standard molar enthalpies of formation were also estimated by employing two different methodologies: one based on the Cox scheme and the other one based on several different computational approaches. The calculated values show a good agreement with the experimental values obtained in this work.     

Kinetics and mechanism of reactions between aromatic olefins and hydroxyl radicals

The rates of the reactions of hydroxyl radicals (OH) with styrene, α-methylstyrene, and β-methylstyrene have been measured by irradiating mixtures of these aromatic olefins and NO in an environmental chamber at 298 K. Experimental conditions were used whereby the competition of ozone with OH in oxidizing the hydrocarbons could be considered negligible. The rate constant values, obtained by a relative method using isooctane as reference hydrocarbon, are: styrene (5.3 ± 0.5) × 10^?11 cm³/molec·s, α-methylstyrene (5.3 ± 0.6) × 10^?11 cm³/molec·s, and β-methylstyrene (6.0 ± 0.6) × 10^?11 cm³/molec·s. A simplified kinetic treatment of the experimental data shows that styrene and β-methylstyrene are stoichiometrically converted to benzaldehyde, suggesting that OH attack occurs only on the aliphatic moiety of the aromatic olefins. Benzaldehyde was observed to undergo consecutive oxidation by OH, and its maximum formation yield was about 60%. A reaction mechanism is proposed where the primary rate-determining OH attack leads to the formation of 1-hydroxy-2-phenyl-2-ethenyl radicals, from which benzaldehyde is formed through fast intermediate reactions.     

Validation of Membrane Protein Topology Models by Oxidative Labeling and Mass Spectrometry

Computer-assisted topology predictions are widely used to build low-resolution structural models of integral membrane proteins (IMPs). Experimental validation of these models by traditional methods is labor intensive and requires modifications that might alter the IMP native conformation. This work employs oxidative labeling coupled with mass spectrometry (MS) as a validation tool for computer-generated topology models. ⋅OH exposure introduces oxidative modifications in solvent-accessible regions, whereas buried segments (e.g., transmembrane helices) are non-oxidizable. The Escherichia coli protein WaaL (O-antigen ligase) is predicted to have 12 transmembrane helices and a large extramembrane domain (Pérez et al., Mol. Microbiol. 2008, 70, 1424). Tryptic digestion and LC-MS/MS were used to map the oxidative labeling behavior of WaaL. Met and Cys exhibit high intrinsic reactivities with ⋅OH, making them sensitive probes for solvent accessibility assays. Overall, the oxidation pattern of these residues is consistent with the originally proposed WaaL topology. One residue (M151), however, undergoes partial oxidation despite being predicted to reside within a transmembrane helix. Using an improved computer algorithm, a slightly modified topology model was generated that places M151 closer to the membrane interface. On the basis of the labeling data, it is concluded that the refined model more accurately reflects the actual topology of WaaL. We propose that the combination of oxidative labeling and MS represents a useful strategy for assessing the accuracy of IMP topology predictions, supplementing data obtained in traditional biochemical assays. In the future, it might be possible to incorporate oxidative labeling data directly as constraints in topology prediction algorithms.