Enantioselective iridium-catalyzed carbonyl allylation from the alcohol or aldehyde oxidation level via transfer hydrogenative coupling of allyl acetate: departure from chirally modified allyl metal reagents in carbonyl addition

Under the conditions of transfer hydrogenation employing an iridium catalyst generated in situ from [Ir(cod)Cl]2, chiral phosphine ligand (R)-BINAP or (R)-Cl,MeO-BIPHEP, and m-nitrobenzoic acid, allyl acetate couples to allylic alcohols 1a-c, aliphatic alcohols 1d-l, and benzylic alcohols 1m-u to furnish products of carbonyl allylation 3a-u with exceptional levels of asymmetric induction. The very same set of optically enriched carbonyl allylation products 3a-u are accessible from enals 2a-c, aliphatic aldehydes 2d-l, and aryl aldehydes 2m-u, using iridium catalysts ligated by (-)-TMBTP or (R)-Cl,MeO-BIPHEP under identical conditions, but employing isopropanol as a hydrogen donor. A catalytically active cyclometallated complex V, which arises upon ortho-C-H insertion of iridium onto m-nitrobenzoic acid, was characterized by single-crystal X-ray diffraction. The results of isotopic labeling are consistent with intervention of symmetric iridium pi-allyl intermediates or rapid interconversion of sigma-allyl haptomers through the agency of a symmetric pi-allyl. Competition experiments demonstrate rapid and reversible hydrogenation-dehydrogenation of the carbonyl partner in advance of C-C coupling. However, the coupling products, which are homoallylic alcohols, experience very little erosion of optical purity by way of redox equilibration under the coupling conditions, although isopropanol, a secondary alcohol, may serve as terminal reductant. A plausible catalytic mechanism accounting for these observations is proposed, along with a stereochemical model that accounts for the observed sense of absolute stereoinduction. This protocol for asymmetric carbonyl allylation transcends the barriers imposed by oxidation level and the use of preformed allyl metal reagents.     

Ruthenium-catalyzed C-C bond forming transfer hydrogenation: carbonyl allylation from the alcohol or aldehyde oxidation level employing acyclic 1,3-dienes as surrogates to preformed allyl metal reagents

Under the conditions of ruthenium-catalyzed transfer hydrogenation, commercially available acyclic 1,3-dienes, butadiene, isoprene, and 2,3-dimethylbutadiene, couple to benzylic alcohols 1a-6a to furnish products of carbonyl crotylation 1b-6b, carbonyl isoprenylation 1c-6c, and carbonyl reverse 2-methyl prenylation 1d-6d. Under related transfer hydrogenation conditions employing isopropanol as terminal reductant, isoprene couples to aldehydes 7a-9a to furnish identical products of carbonyl isoprenylation 1c-3c. Thus, carbonyl allylation is achieved from the alcohol or the aldehyde oxidation level in the absence of preformed allyl metal reagents. Coupling to aliphatic alcohols (isoprene to 1-nonanol, 65% isolated yield) and allylic alcohols (isoprene to geraniol, 75% isolated yield) also is demonstrated. Isotopic labeling studies corroborate a mechanism involving hydrogen donation from the reactant alcohol or sacrificial alcohol (i-PrOH).     

Catalytic Carbonyl Addition through Transfer Hydrogenation: A Departure from Preformed Organometallic Reagents

Classical protocols for carbonyl allylation, propargylation and vinylation typically rely upon the use of preformed allyl metal, allenyl metal and vinyl metal reagents, respectively, mandating stoichiometric generation of metallic byproducts. Through transfer hydrogenative C C coupling, however, carbonyl addition may be achieved from the aldehyde or alcohol oxidation level in the absence of stoichiometric organometallic reagents or metallic reductants. Here, we review transfer hydrogenative methods for carbonyl addition, which encompass the first catalytic protocols enabling direct C H functionalization of alcohols.     

Iridium-catalyzed carbonyl allylation by allyl ethers with tin(II) chloride

3-Alkoxypropenes, namely allyl ethers such as allyl butyl ether, allyl 2-hydroxypropyl ether, and diallyl ether, serve as reagents for the allylation of aldehydes with tin(II) chloride in the presence of a catalytic amount of [IrCl(cod)]₂ in THF and H₂O at 50 °C to produce the corresponding homoallylic alcohols.     

Consecutive iridium catalyzed C-C and C-H bond forming hydrogenations for the diastereo- and enantioselective synthesis of syn-3-fluoro-1-alcohols: C-H (2-fluoro)allylation of primary alcohols

Commercially available (2-fluoro)allyl chloride serves as an efficient allyl donor in highly enantioselective iridium catalyzed carbonyl (2-fluoro)allylations from the alcohol or aldehyde oxidation level via transfer hydrogenation. Diastereoselective Crabtree hydrogenation of the resulting homoallylic alcohols provides syn-3-fluoro-1-alcohols.     

One-Pot synthesis of gamma,delta-unsaturated carbonyl compounds from allyl alcohols and vinyl or isopropenyl acetates catalyzed by [IrCl(cod)]2

One-pot synthesis of gamma,delta-unsaturated carbonyl compounds from allyl alcohols and vinyl or isopropenyl acetates was achieved through in situ generation of allyl vinyl ethers by the action of the [IrCl(cod)]2 complex followed by Claisen rearrangement of the resulting ethers. For instance, the reaction of trans-2-methyl-3-phenyl-2-propen-1-ol with isopropenyl acetate in the presence of [IrCl(cod)]2 (1 mol %) and Cs2CO3 (5 mol %) at 100 degrees C for 3 h followed by 140 degrees C for 15 h afforded 5-methyl-4-phenyl-5-hexen-2-one in 72% yield. When vinyl acetate was employed in place of isopropenyl acetate, 4-methyl-3-phenyl-4-pentenal was obtained in 83% yield.     

Catalytic enantioselective Grignard Nozaki-Hiyama methallylation from the alcohol oxidation level: chloride compensates for π-complex instability

Methallyl chloride serves as an efficient allyl donor in highly enantioselective Grignard Nozaki-Hiyama methallylations from the alcohol or aldehyde oxidation level via iridium catalyzed transfer hydrogenation. Under identical conditions, methallyl acetate does not react efficiently. Double methallylation of 1,3-propanediol provides the C(2)-symmetric adduct as a single enantiomer, as determined by HPLC analysis.     

Diastereo‐ and Enantioselective Iridium Catalyzed Carbonyl (α‐Cyclopropyl)allylation via Transfer Hydrogenation

The first examples of diastereo‐ and enantioselective carbonyl α‐(cyclopropyl)allylation are reported. Under the conditions of iridium catalyzed transfer hydrogenation using the chiral precatalyst (R)‐Ir‐ I modified by SEGPHOS, carbonyl α‐(cyclopropyl)allylation may be achieved with equal facility from alcohol or aldehyde oxidation levels. This methodology provides a conduit to hitherto inaccessible inaccessible enantiomerically enriched cyclopropane‐containing architectures.     

Direct generation of acyclic polypropionate stereopolyads via double diastereo- and enantioselective iridium-catalyzed crotylation of 1,3-diols: beyond stepwise carbonyl addition in polyketide construction

Under the conditions of transfer hydrogenation employing the cyclometalated iridium catalyst (R)-I derived from [Ir(cod)Cl](2), allyl acetate, 4-cyano-3-nitrobenzoic acid, and the chiral phosphine ligand (R)-SEGPHOS, α-methylallyl acetate engages 1,3-propanediol (1a) and 2-methyl-1,3-propanediol (1b) in double carbonyl crotylation from the alcohol oxidation level to deliver the C(2)-symmetric and pseudo-C(2)-symmetric stereopolyads 2a and 3a, respectively, with exceptional control of anti-diastereoselectivity and enantioselectivity. Notably, the polypropionate stereopentad 3a is formed predominantly as 1 of 16 possible stereoisomers. Desymmetrization of 3a is readily achieved upon iodoetherification to form pyran 4. The direct generation of 3a enables a dramatically simplified approach to previously prepared polypropionate substructures, as demonstrated by the synthesis of C19-C27 of rifamycin S (eight steps, originally prepared in 26 steps) and C19-C25 of scytophycin C (eight steps, originally prepared in 15 steps). The present transfer hydrogenation protocol represents an alternative to chiral auxiliaries, chiral reagents, and premetalated nucleophiles in polyketide construction.     

Iridium-catalyzed C-C coupling via transfer hydrogenation: carbonyl addition from the alcohol or aldehyde oxidation level employing 1,3-cyclohexadiene

Under hydrogen autotransfer conditions employing a catalyst derived from [Ir(cod)Cl]2 and BIPHEP, 1,3-cyclohexadiene (CHD) couples to benzylic alcohols 1a-9a to furnish carbonyl addition products 1c-9c, which appear as single diastereomers with variable quantities of regioisomeric adducts 1d-9d. Under related transfer hydrogenation conditions employing isopropanol as terminal reductant, identical carbonyl adducts 1c-9c are obtained from the aldehyde oxidation level. Isotopic labeling studies corroborate a mechanism involving hydrogen donation from the reactant alcohol or sacrificial alcohol (i-PrOH).     

Enhanced anti-diastereo- and enantioselectivity in alcohol-mediated carbonyl crotylation using an isolable single component iridium catalyst

The cyclometalated iridium complex (S)-I derived from [Ir(cod)Cl](2), 4-cyano-3-nitrobenzoic acid, allyl acetate, and (S)-SEGPHOS is conveniently isolated by precipitation or through conventional silica gel flash chromatography. This single-component precatalyst allows alcohol mediated carbonyl crotylations to be performed at significantly lower temperature, resulting in enhanced levels of anti-diastereo- and enantioselectivity. Most significantly, the chromatographically isolated precatalyst (S)-I enables carbonyl crotylations that are not possible under previously reported conditions involving in situ generation of (S)-I.     

Direct synthesis of B-allyl and B-allenyldiisopinocampheylborane reagents using allyl or propargyl halides and indium metal under Barbier-type conditions

We report the first one-pot process for the asymmetric addition of allyl, methallyl, and propargyl groups to aldehydes and ketones using B-chlorodiisopinocampheylborane ((d)DIP-Cl) and indium metal. Under Barbier-type conditions, indium metal was used to generate allyl- and allenylindium intermediates, and subsequent reaction with (d)DIP-Cl successfully promoted the transfer of these groups to boron forming the corresponding chiral borane reagents. The newly formed borane reagents were reacted with aldehydes and ketones to produce the corresponding alcohol products in high yields and up to excellent enantioselectivity (98% ee). This method produced excellent enantioenriched secondary homoallylic alcohols from the allylation and methallylation of benzaldehyde. Using this method, the methallylation and cinnamylation of ketones afforded the highest enantioselectivities, while the propargylation of both aldehydes and ketones provided low enantiomeric excesses. In addition, this procedure provided the first synthesis of B-allenyldiisopinocampheylborane, which was characterized by (1)H and (11)B NMR spectroscopy. This is the first example of the direct synthesis of allylboranes that contained substitutions from the corresponding allyl bromide and indium, thereby expanding the utility of the DIP-Cl reagent. Hence, a general and straightforward route to these chiral organoborane reagents in one-pot has been developed along with the asymmetric Barbier-type allylation and propargylation of aldehyde and ketone substrates using these chiral organoborane reagents in subsequent coupling reactions.     

Petasis Borono-Mannich reaction and allylation of carbonyl compounds via transient allyl boronates generated by palladium-catalyzed substitution of allyl alcohols. an efficient one-pot route to stereodefined alpha-amino acids and homoallyl alcohols

An efficient one-pot procedure was designed by integration of the pincer-complex-catalyzed borylation of allyl alcohols in the Petasis borono-Mannich reaction and in allylation of aldehydes and ketones. These procedures are suitable for one-pot synthesis of alpha-amino acids and homoallyl alcohols from easily available allyl alcohol, amine, aldehyde, or ketone substrates. In the presented transformations, the active allylating agents are in situ generated allyl boronic acid derivatives. These transient intermediates are proved to be reasonably acid-, base-, alcohol-, water-, and air-stable species, which allows a high level of compatibility with the reaction conditions of the allylation of various aldehyde/ketone and imine electrophiles. The boronate source of the reaction is diboronic acid or in situ hydrolyzed diboronate ester ensuring that the waste product of the reaction is nontoxic boric acid. The regio- and stereoselectivity of the reaction is excellent, as almost all products form as single regio- and stereoisomers. The described procedure is suitable to create quaternary carbon centers in branched allylic products without formation of the corresponding linear allylic isomers. Furthermore, products comprising three stereocenters were formed as single products without formation of other diastereomers. Because of the highly disciplined consecutive processes, up to four-step, four-component transformations could be performed selectively as a one-pot sequence. For example, stereodefined pyroglutamic acid could be prepared from a simple allyl alcohol, a commercially available amine, and glyoxylic acid in a one-step procedure. The presented method also grants an easy access to stereodefined 1,7-dienes that are useful substrates for Grubbs ring-closing metathesis.     

Enantioselective allylation of aldehydes with chiral allyl organolanthanide reagents

The first example of enantioselective allylation of aldehydes with chiral allyl organolan-thanide reagents has been achieved in high chemical yield and moderate optical purity (up to 54% e.e.).     

Catalytic reductive alkylation of secondary amine with aldehyde and silane by an iridium compound

[reaction: see text] An efficient methodology for the reductive alkylation of secondary amine with aldehyde and Et(3)SiH using an iridium complex as a catalyst has been developed. For example, treatment of dibutylamine with butyraldehyde and Et(3)SiH (a 1:1:1 molar amount of amine, aldehyde, and silane) in 1,4-dioxane at 75 degrees C under the influence of a catalytic amount of [IrCl(cod)](2) gave tributylamine in quantitative yield. In this reaction, no reduction of aldehyde took place. It was found that IrCl(3), which is a starting material for preparation of iridium complexes such as [IrCl(cod)](2), acts as an efficient catalyst for the present reductive alkylation of amine. In addition, a cheaper, easy-to-handle, and environmentally friendly reducing reagent such as polymethylhydrosiloxane (PMHS) in place of Et(3)SiH was also useful. Thus, a variety of secondary amines could be alkylated by allowing them to react with aldehydes and PMHS in the presence of an iridium catalyst to afford the corresponding tertiary amines in good to excellent yields. From the deuterium label experiments, it was revealed that silane and water, generated during the formation of enamine by the reaction of amine and aldehyde, seem to behave as a hydrogen source. The catalytic cycle was discussed.     

新型手性N,P配体的合成及其在烯丙基化中的应用

以手性5,6,7,8-四氢-8-喹啉醇为原料合成了新型手性N,P配体, 并将该配体应用于钯催化的1,3-二苯基-2-烯丙基乙酸酯的不对称烯丙基化反应, 得到100%的取代产物, 对映体过量达到73% ee.     

Discovery of Novel Catalysts for Allylic Alkylation with a Visual Colorimetric Assay

The first non-phosphane iridium catalyst, made from [{IrCl(cod)}(2)] and iPr-pybox (shown schematically; cod=1,5-cyclooctadiene), for allylic alkylation in neutral medium was discovered by a simple, rapid, and inexpensive screening assay. The red coloration upon treatment of the reaction mixtures with Fast Red (see the 96-well plate) indicates the presence of 1-naphthol and thus the occurrence of allylic alkylation.     

Allylation of alcohols and carboxylic acids with allyl acetate catalyzed by [Ir(cod)2](+)BF4- complex

A facile method for the synthesis of allyl alkyl ethers from alcohols with allyl acetate was developed by the use of [Ir(cod)(2)](+)BF(4)(-) complex. For instance, the reaction of allyl acetate with n-octyl alcohol in the presence of a catalytic amount of [Ir(cod)(2)](+)BF(4)(-) complex afforded allyl octyl ether in quantitative yield. Allyl carboxylates were also prepared by the exchange reaction between carboxylic acids and allyl acetate in good yields. The [Ir(cod)(2)](+)BF(4)(-) complex catalyzed the reaction of alkyl and aromatic amines with allyl acetate to lead to the corresponding allylamines in fair to good yields.     

Dynamic Kinetic Resolution of 2-(Quinolin-8-yl)Benzaldehydes: Atroposelective Iridium-Catalyzed Transfer Hydrogenative Allylation

An atroposelective Ir-catalyzed dynamic kinetic resolution (DKR) of 2-(quinolin-8-yl)benzaldehydes/1-naphthaldehydes by transfer hydrogenative coupling of allyl acetate is disclosed. The allylation reaction takes place with simultaneous installation of central and axial chirality, reaching high diastereoselectivities and excellent enantiomeric excesses when ortho-cyclometalated iridium-DM-BINAP is used as the catalyst. The racemization of the substrates occurs through a designed transient Lewis acid-base interaction between the quinoline nitrogen atom and the aldehyde carbonyl group.     

Enantioselective total synthesis of the proposed structure of macrolide iriomoteolide-1b

An enantioselective total synthesis of the proposed structure of macrolide iriomoteolide-1b has been achieved by a convergent protocol, which was featured by an enantioselective organocatalytic transfer hydrogenation of enal, a Julia-Kocienski olefination to establish the C15-C16 E-olefin moiety, a Kulinkovich reaction associated with cyclopropyl-allyl rearrangement to produce allyl stannane and ytterbium triflate and carboxylic acid promoted allylation between allyl stannane and aldehyde with tertiary alcohol at the α-position. The construction of macrolide 2 was realized by the successful implementation of RCM utilizing 5 mol % Grubbs’s second generation catalyst at room temperature with E-isomer as a single product.