Fe/MgO催化合成碳纳米管和氮掺杂碳纳米管

以MgO负载的Fe为催化剂、正己烷为碳源、乙二胺为氮源, 用催化化学气相沉积法合成了碳纳米管(CNTs)和氮掺杂碳纳米管(CNx). 通过还原焙烧的Mg/Fe水滑石(LDH)和Mg(NO3)2/Fe(NO3)3前驱体得到具有催化活性的Fe催化剂(Fe-LDH和Fe-Mg(NO3)2/Fe(NO3)3). 由这两种催化剂催化合成的CNTs都具有中空的管状结构. Fe-LDH催化合成的CNx具有明显的“竹节”状形貌, 而Fe-Mg(NO3)2/Fe(NO3)3催化合成的部分CNx的形貌与“竹节”状不同. 该CNx具有厚的管壁且在管壁的石墨层与层之间存在大量的空隙. Fe-LDH催化合成的CNx中氮摩尔分数为6.3%, 高于Fe-Mg(NO3)2/Fe(NO3)3催化合成CNx中的5.7%; 但后者具有更多的缺陷, 石墨化程度更加无序.     

氮掺杂竹节状碳纳米管的催化合成

以有机胺为碳和氮源, 用催化方法合成出了含氮大管径竹节状碳纳米管. Fe/SBA-15分子筛为催化剂, 有机胺经过973 K高温裂解得到氮掺杂竹节状碳纳米管材料(CN_X). 比较了铁含量、二乙胺和六次甲基四胺原料对合成氮掺杂碳纳米管形貌和氮掺杂量的影响; 合成出氮碳比(N/C原子比)为0.26的氮掺杂竹节状碳纳米管材料.     

氮掺杂碳纳米管包覆碳化硅作为不含金属的催化剂(英文)

A hierarchical metal-free catalyst consisting of nitrogen-doped carbon nanotubes decorated onto a silicon carbide (N-CNTs/SiC) macroscopic host structure was prepared. The influence of N-CNTs incorporation on the physical properties of the support was evaluated using different characterization techniques. The catalyst was tested as a metal-free catalyst in the selective oxidation of H2S and steam-free dehydrogenation of ethylbenzene. The N-CNTs/SiC catalyst exhibited extremely good desulfurization performance compared to a Fe2O3/SiC catalyst under less conducive reaction conditions such as low temperature, high space velocity, and a low O2-to-H2S molar ratio. For the dehy-drogenation of ethylbenzene, a higher dehydrogenation activity was obtained with the N-CNTs/SiC catalyst compared to a commercial K-Fe/Al2O3 catalyst. The N-CNTs/SiC catalyst also displayed good stability as a function of time on stream for both reactions, which was attributed to the strong anchoring of the nitrogen dopant in the carbon matrix. The extrudate shape of the SiC support allowed the direct macroscopic shaping of the catalyst for use in a conventional fixed-bed reactor without the problems of catalyst handling, transportation, and pressure drop across the catalyst bed that are encountered with nanoscopic carbon-based catalysts.     

基于多壁碳纳米管和氧化锌纳米棒复合物的葡萄糖生物传感器(英文)

利用多壁碳纳米管(MWCNTs)和氧化锌(ZnO)纳米棒复合物膜构建了一种新的电流型葡萄糖生物传感器。MWCNTs-ZnO复合物在超声协助下通过静电配位的方式产生。其中,ZnO纳米棒的存在加强了该复合物催化氧化H2O2的能力,增加了响应电流。与单一的MWCNTs和ZnO相比,这种纳米复合物显示了更为有效地电催化活性。在此基础上,我们以MWCNTs-ZnO复合物膜为基底,用戊二醛交联法固定葡萄糖氧化酶,电聚合邻苯二胺(PoPD)膜为抗干扰层,构建了抗干扰能力强,稳定性好,灵敏度高,响应快的葡萄糖传感器。在+0.8V的检测电位下,该传感器对葡萄糖响应的线性范围为5.0×10-6~5.0×10-3mol·L-1(R=0.997),检测限为3.5×10-6mol·L-1(S/N=3),响应时间小于10s的葡萄糖生物传感器,常见干扰物质如抗坏血酸和尿酸不影响测定。     

氮掺杂碳纳米管负载的Ru和Pd催化剂上异丙醇的转化(英文)

Ru and Pd (2 wt%) loaded on pure and on Ndoped carbon nanotubes (NCNTs) were prepared and tested using the isopropyl alcohol decomposition reaction as probe reaction. The presence of nitrogen functionalities (pyridinic, pyrrolic, and quaternary nitrogen) on the nitrogen doped support induced a higher metal dispersion: Pd/NCNT (1.8 nm) Pd/CNT (4.9 nm), and Ru/NCNT (2.4 nm) Ru/CNT (3.0 nm). The catalytic activity of the supports was determined first. Isopropyl alcohol conversion produces acetone on CNTs while on NCNTs it led to both dehydration and dehydrogenation products. At 210 °C and in the presence of air, the isopropyl alcohol conversion was higher on the NCNTs (25%) than on the CNTs (11%). The Pd loaded catalysts were more active and more selective than the Ru ones. At 115 °C, the Pd catalysts were 100% selective towards acetone for a conversion of 100%, whereas the Ru catalysts led to dehydration and dehydrogenation products. The nitrogen doping induced the appearance of redox properties when oxygen is present in the reaction mixture.     

银/碳纳米管纳米复合物制备及性质研究

基于苯环与碳纳米管之间较强的π-π共轭效应和醛基对银氨溶液的还原作用,利用吸附在碳纳米管上的香草醛分子原位还原[Ag(NH3)2]+,成功获得了纳米银/碳纳米管(Ag-NPs/CNTs)复合纳米材料。紫外-可见吸收光谱和荧光光谱结果表明,碳纳米管对香草醛分子有较强的吸附作用及银纳米粒子的形成。透射电镜结果表明,碳纳米管表面形成了大小约5.0 nm银纳米颗粒。所制备的纳米复合材料表现出较明显的荧光特性,且对浓度为1.0×10-7～6.0×10-7 mol/L的H2O2表现出较好的电催化还原能力。     

通过铁掺杂和造孔提高氮掺杂石墨烯/碳纳米管复合物电催化氧还原性能的研究（英文）

氧还原反应催化剂的性能直接影响着能源转换和存储器件如燃料电池和金属-空气电池的性能. 开发低成本、高性能的非铂族金属氧还原催化剂对于这类器件的实际应用和商业化十分重要,因此备受关注. 氮掺杂的石墨烯/碳纳米管复合物同时具备碳纳米管的良好导电性能和有利于传质的三维网络结构优点,以及氮掺杂石墨烯的高活性优点,因此有望发展为这类可替代铂族催化剂的氧还原电催化剂之一,但目前其催化性能还需进一步提高. 本文研究发现通过在氮掺杂石墨烯/碳纳米管复合物的过程中引入铁元素可以有效提高催化剂的氧还原活性,并且发现通过在热处理和氮掺杂过程中加入二氧化硅纳米颗粒及随后除去二氧化硅,可以在氮掺杂的石墨烯/碳纳米管复合物材料中有效地形成多孔结构. 这种多孔结构的形成不仅可以在复合物中引入更多的高活性催化位点,而且有利于暴露更多的催化活性位并促进氧还原反应中的传质过程. 结合碳纳米管、石墨烯和多孔结构的三者优点,所制备的多孔氮掺杂碳材料表现出优异的电催化氧还原性能. 进一步的实验表明,这类材料还表现出优异的抗甲醇中毒能力和良好的稳定性,因此在性能改进后有望用于燃料电池等能量转换与存储器件.     

凝结相中功能性碳材料和碳纳米复合物催化转化生物质制备可再生化学品(英文)

The production of chemicals from lignocellulosic biomass provides opportunities to synthesize chemicals with new functionalities and grow a more sustainable chemical industry. However, new challenges emerge as research transitions from petrochemistry to biorenewable chemistry. Compared to petrochemisty, the selective conversion of biomass-derived carbohydrates requires most catalytic reactions to take place at low temperatures ( 300 °C) and in the condensed phase to prevent reactants and products from degrading. The stability of heterogeneous catalysts in liquid water above the normal boiling point represents one of the major challenges to overcome. Herein, we review some of the latest advances in the field with an emphasis on the role of carbon materials and carbon nanohybrids in addressing this challenge.     

Fe/Cu修饰氮掺杂碳纳米管的构筑及催化性能

通过简单的原位化学合成法结合离子交换法制备了Cu修饰氮掺杂碳（Cu-N-C）和Fe/Cu修饰氮掺杂碳纳米管（Fe/Cu-N-C/CNT）,并系统评估了2种催化剂作为染料敏化太阳能电池（dye-sensitized solar cells,DSSCs）对电极在I₃^-/I^-体系中的电化学特性和光伏性能。采用X射线衍射（XRD）、拉曼（Raman）、X射线光电子能谱（XPS）和场发射扫描电镜（FESEM）对合成的催化剂进行组分和形貌表征。结果表明：纳米管状的Fe/Cu-N-C/CNT的石墨化程度比纳米颗粒状的Cu-N-C更高,更有利于I₃^-还原反应中电荷的传输。光伏性能测试结果表明：基于Fe/Cu-N-C/CNT对电极的DSSCs的光电能量转换效率（power conversion efficiency,PCE）达到7.55%,高于相同测试条件下Cu-N-C（6.99%）和Pt（6.76%）对电极的PCE。50圈连续循环伏安测试结果表明：Fe/Cu-N-C/CNT催化剂具有比Cu-N-C更好的电化学稳定性。     

固酶氮掺杂碳纳米复合物基燃料电池性能

利用掺杂氮介孔材料(NDMPC)和羧甲基壳聚糖(CMCH)机械共混的纳米复合物作为固酶载体,以滴涂-干燥法分别制备了固定漆酶(Lac)阴极和固定葡萄糖氧化酶阳极,组装了有Nafion离子交换膜的葡萄糖/O₂酶燃料电池.固定漆酶电极作为燃料电池阴极和氧电化学传感器的性能以结合旋转圆盘电极技术的循环伏安法、线性扫描伏安(LSV)法以及计时电流法进行表征,同时使用紫外-可见分光光度法和石墨炉原子吸收光谱法研究酶分子在电极表面的构型和估算电极表面载体对酶的担载量.测试结果表明:固酶阴极在无电子中介体时可以实现漆酶活性中心T₁与导电基体之间的直接电子迁移(表观电子迁移速率为0.013 s^-1),而且具有较小的氧还原超电势(150 mV).通过进一步定量比较分子内电子传递速率(1000 s^-1)、底物转化速率(0.023 s^-1)以及前述酶-导电基体间电子迁移速率,可以发现此电极催化氧还原循环受制于酶-电极之间的电子迁移过程;这种电极对氧的传感性能良好:低检测限(0.04 μmol·dm^-3)、高灵敏度(12.1 μA·μmol^-1·dm³)和良好的对氧亲和力(K_M = 8.2 μmol·dm^-3),这种固酶阴极还具有良好的重现性、长期使用性、热稳定性和pH耐受性.组装的生物燃料电池的开路电压为0.38 V,最大能量输出密度为19.2 μW·cm^-2,最佳工作条件下使用3周后输出功率密度仍可保持初始值的60%以上.     

Catalytic decomposition of methylene chloride on oxidative carbon supported metal oxide catalysts

Several carbon supported chromium oxide catalysts were prepared by varying textural and surface properties of support and tested for methylene chloride oxidation. They were investigated by TGA and XPS. The difference in acidity and high valence of chromium led to difference in activity. This revised version was published online in June 2006 with corrections to the Cover Date.     

氮掺杂碳包覆纳米钴颗粒用于硝基芳烃室温选择性加氢（英文）

通过硝基芳烃选择性加氢能高效地制备芳香胺和环胺,其中芳香胺作为重要的化工中间体应用于多个领域(精细化工、商业产品和聚合物).在加氢反应过程中,硝基的还原伴随着生成一些副产物(如亚硝基和偶氮化合物).同时对于含还原性基团的取代硝基苯,硝基的选择还原也面临着很大的挑战.金属钴是常用的硝基加氢催化剂活性成分,但是由于对反应底物的过度吸附,导致其选择性不高.早期研究发现,氮掺杂碳催化剂能有效吸附硝基基团,从而在硝基苯加氢中表现出一定活性,但对分子氢的活化不足.因此,氮掺杂碳作为吸附材料与钴构建复合催化剂,能够发挥吸附和活化氢的协同作用,从而高效催化硝基苯加氢.基于此,本课题组发展了一种制备方法,可将钴颗粒尺寸限制在10 nm左右,且包覆在氮掺杂碳中,并应用于对硝基苯酚的室温选择性加氢反应中,发现相较于碳负载钴和氮掺杂碳催化剂,所制催化剂在室温下表现出了很好的活性和选择性.在此基础上,本文采用元素分析、X射线光电子能谱(XPS)和拉曼光谱(Raman)等手段对催化剂形貌和结构进行了研究.表征结果表明,保持钴前驱体的量不变,随着氮化碳加入量的增加,催化剂中氮掺杂浓度提高;当氮化碳/钴1时,氮掺杂浓度不变.红外结果表明,与普通碳载体相比,氮掺杂碳对硝基苯有很强的吸附作用,而氮掺杂碳包覆的钴催化剂也表现出同样的结果.通过调节氮的掺杂浓度,一方面可以修饰碳载体的电子结构,增加表面缺陷的浓度,提高与反应底物的相互作用;另一方面可以促进电子由钴颗粒转移至与之相连的氮原子上,因此进一步促进钴颗粒对分子氢的活化作用.该复合结构的催化剂实现了底物吸附和氢活化的协同作用,氮掺杂碳将反应底物吸附在表面,钴颗粒活化氢,随后解离的氢原子与表面吸附物反应,从而实现硝基苯的高效加氢.其中Co@NC-1催化活性最高,并在循环套用10次后,仍维持较高的催化活性,同时对含其它取代基的硝基苯均表现很高的活性和选择性.     

基于氧化锌/碳纳米纤维材料的氧氟沙星电化学传感器的构建及应用

通过静电纺丝技术合成碳纳米纤维,以循环伏安法在此碳纤维上电聚合乙酸锌制备复合纳米材料作为一种新型的电化学增敏剂,用于修饰玻碳电极,开发了一种基于碳纤维和氧化锌复合材料的新型电化学传感器(ZnO/CNF/GCE)。使用循环伏安法、差分脉冲伏安法等进行电化学催化性能的研究,并优化实验条件。结果表明,与裸电极相比,在pH 5.5磷酸盐缓冲溶液中,ZnO/CNF/GCE修饰电极能使氧氟沙星的峰电流明显提升,线性范围1~200μmol/L,检测限为0.33μmol/L。该ZnO/CNF/GCE修饰电极已用于氧氟沙星滴耳液中氧氟沙星的含量测定。     

Multifunctional nanocomposites based on tetraethylenepentamine-modified graphene oxide/epoxy

Composites based on epoxy/graphene were investigated for thermal-mechanical performance. Initially, few-layer graphene oxide (GO) was modified with tetraethylenepentamine (GO-TEPA) in a reaction assisted by microwave radiation. GO and GO-TEPA samples were characterized for their structure and morphology. Composites containing 0.1, 0.3 and 0.5 wt.% of GO and GO-TEPA were prepared, and the effect of fillers on the morphology of cryofractured regions of epoxy matrix was observed through electron microscopy images. Dynamic mechanical thermal analysis (DMA) tests revealed increases of approximately 20 °C in glass transition. Moreover, when compared to neat polymer, composites containing 0.5 wt.% of GO-TEPA gained up to 103% in thermal conductivity (obtained by flash laser). Finally, nanoindentation analyses showed increases of 72% in Young's modulus and 143% in hardness for the same sample. The system is characterized as multifunctional nanocomposites because of the simultaneous gains in thermal and mechanical properties. The best results of the multifunctional composites were strongly associated with the chemical modification of the GO by TEPA.     

Ni基催化剂上未掺杂和氮掺杂的碳纳米纤维生长机理的比较

研究了Ni催化剂上碳纳米纤维,以及Ni和Ni-Cu催化剂上N掺杂的碳纳米纤维的生长机理.结果表明,这两个过程的机理均包含了表面非计量碳化镍的形成,然后是碳或碳和氮通过催化剂颗粒体相的溶解和扩散.     

A nonenzymatic sensor for xanthine based on electrospun carbon nanofibers modified electrode

Xanthine (Xa) determination is of considerable importance in clinical analysis and food quality control. Therefore, a sensitive nonenzymatic amperometric sensor for Xa based on carbon nanofibers (CNFs) has been proposed. The CNFs, which were prepared by electrospinning technique and subsequent thermal treatment, were used to modify carbon paste electrode (CNF-CPE) to construct the amperometric sensor device without any oxidation pretreatment. In application to Xa electrochemical determination, the CNF-CPE exhibited high electrocatalytic activity and fast amperometric response. Various experimental parameters, such as pH and applied potential were optimized. Under the optimal conditions, the dynamic linear range of Xa was 0.03-21.19 μM (R = 0.9992) with the detection limit low to 20 nM (S/N = 3). With good selectivity and sensitivity, the present system was successfully applied to estimate the freshness of fish and determine Xa in human urine, which provides potential application in food quality control and clinical analysis.     

Preparation of quaternarized N-halamine-grafted graphene oxide nanocomposites and synergetic antibacterial properties

At present, frequent outbreaks of bacteria and viruses have seriously affected people's normal lives. Therefore, the study of broad-spectrum antibacterial nanocomposites is very promising. However, most antibacterial materials have some disadvantages, such as single bactericidal mechanisms and unrepeatable use. Based on the current situation, a kind of nanocomposite with three structures of graphene oxide (GO), quaternary ammonium salt (QAs) and N-halamine was prepared, which showed synergistic effect to improve antibacterial activity and combined with a variety of sterilization mechanisms. Meanwhile, GO can provide richer ways of sterilization and high specific surface area, which is conducive to the grafting of quaternarized N-halamine. The advantages of physical sterilization of GO, charge adsorption of QAs, reuse of N-halamine and efficient sterilization are fully utilized. The results showed that the quaternarized N-halamine-grafted GO was obtained successfully. GO grafted with quaternarized N-halamine polymer showed strong speedy bactericidal activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) (99%). It had good storage and regeneration properties.     

A novel electrochemiluminescent immunosensor based on the quenching effect of aminated graphene on nitrogen-doped carbon quantum dots

Nitrogen-doped carbon quantum dots (N-CQDs) with an average diameter of 2 nm were synthesized by carbonization of diethylene triamine pentacetate acid (DTPA). The simple prepared N-CQDs showed excellent electrochemiluminescence (ECL) property and were used as luminophors to fabricate a sandwich-type ECL immunosensor. Aminated graphene (NH₂-G) was also synthesized and used as a label of secondary antibody. The labeled NH₂-G could effectively quench the ECL of N-CQDs modified on electrodes due to ECL resonance energy transfer (ERET). Immunological recognition which induced ECL quenching enabled the quantitative determination of biomarkers. Alpha fetoprotein (AFP) was selected as a model analyte to investigate the analytical performance of the proposed immunosensor. Under optimal conditions, a good linear relationship between ECL intensity and the logarithm of AFP concentration was obtained in the range of 0.01–100 ng mL⁻¹ with the detection limit of 3.3 pg mL⁻¹. The proposed ECL immunosensor showed good stability, acceptable selectivity and reproducibility.     

热解条件对氮杂有序介孔炭材料电催化性能的影响

氧还原反应是燃料电池及金属空气电池中极其重要的电化学反应之一,贵金属铂基催化剂被认为是最有效的氧还原反应电催化剂.然而,贵金属铂的资源稀缺以及高成本问题阻碍了相关技术的大规模应用,探索发展廉价高效的贵金属替代型催化剂是推动燃料电池发展的根本解决方案.近年来,人们在非贵金属催化剂开发方面取得了显著进展,其中新型纳米结构掺杂炭材料研究尤为活跃.氮杂有序介孔炭材料由于其高比表面积和独特的孔结构,在燃料电池技术上具有广泛的应用前景.在氮杂有序介孔炭材料的制备过程中,热解条件对炭材料组成、结构及电催化性能有着重要影响.然而,目前尚未见对氮杂炭材料制备过程中热解条件的影响进行系统研究.
　　本文采用我们发展的蒸汽化-毛细管冷凝法,以SBA-15为硬模板浸渍前驱体吡咯,制备出具有高比表面积和独特孔结构的氮杂有序介孔炭材料,系统研究了热解条件(包括热解温度、热解时间和升温速率)对炭材料组成、结构及电催化性能的影响,采用N2吸附-脱附等温线、X射线光电子能谱(XPS)及Raman光谱等方法考察了氮杂有序介孔炭材料的结构和组成,采用循环伏安法与旋转环盘电极研究了其电化学行为与氧还原反应电催化活性及选择性.
　　N2吸附-脱附等温线显示,氮杂炭材料对应IV型吸附-脱附等温线,孔径主要分布在2–10 nm,表明所制材料具有介孔结构.随着热处理温度升高,氮杂有序介孔炭材料比表面积先增加而后降低,热处理时间的延长有利于比表面积增大,但升温速率对所制炭材料比表面积没有明显影响,当升温速率为30 oC/min,900 oC焙烧3 h时,氮杂有序介孔炭材料的比表面积达到最大值888 m2/g. XPS测试结果表明,随着热处理温度升高,氮杂有序介孔炭材料中含氮基团的分解进一步加深,使N含量逐渐降低.延长热处理时间亦然,而升温速率的改变对N含量无明显影响.在热处理温度较低时(600 oC),所得材料中N主要以吡咯氮和吡啶氮的形式存在;当温度达到800 oC以上,吡咯氮转化为吡啶氮和骨架氮,且主要以骨架氮形式存在,说明氮杂有序介孔炭材料的石墨化程度逐渐升高. Raman光谱结果显示,随着热处理温度升高, ID/IG逐渐降低,进一步印证了温度对石墨化程度的影响.
　　电化学测试结果表明,随着热处理温度升高,氮杂有序介孔炭材料的氧还原反应电催化活性逐渐升高,但是当热处理温度从900 oC升至1000 oC时,氧还原反应活性增加很小;升温速率与热处理时间对氧还原反应电催化活性的影响均不明显.与商品Pt/C催化剂相比,900 oC以上所制催化剂均表现出更优异的氧还原电催化活性与选择性.由此可见,热处理温度是决定碳源热化学行为的关键因素,进而决定炭材料表面组成与结构.电化学研究结果表明,800 oC以上进行热处理碳化,所生成石墨化微晶可有效促进电子传递,降低欧姆极化损失,同时,较高的处理温度可促进骨架氮掺杂,从而构建出高效氧还原反应活性位点.因此,氮杂型炭催化剂的组成、结构与电化学性能更多地受控于热处理过程中的热力学,而非热解动力学过程.