A rapid fluorescence polarization immunoassay for the determination of T-2 and HT-2 toxins in wheat

A rapid fluorescence polarization (FP) immunoassay has been developed for the simultaneous determination of T-2 and HT-2 toxins in naturally contaminated wheat samples. Syntheses of four fluorescein-labelled T-2 or HT-2 toxin tracers were carried out and their binding response with seven monoclonal antibodies was evaluated. The most sensitive antibody-tracer combination was obtained by using an HT-2-specific antibody and a fluorescein-HT-2 tracer. The developed competitive FP immunoassay in solution showed high cross-reactivity for T-2 toxin (CR% = 100%) while a very low CR% for neosolaniol (0.12%) and no cross-reactivity with other mycotoxins frequently occurring in wheat. A rapid extraction procedure using 90% methanol was applied to wheat samples prior to FP immunoassay. The average recovery from spiked wheat samples (50 to 200 μg kg⁻¹) was 96% with relative standard deviation generally lower than 8%. A limit of detection of 8 μg kg⁻¹ for the combined toxins was determined. Comparative analyses of 45 naturally contaminated and spiked wheat samples by both the FP immunoassay and high-performance liquid chromatography/immunoaffinity clean-up showed a good correlation (r = 0.964). These results, combined with the rapidity (10 min) and simplicity of the assay, show that this method is suitable for high throughput screening as well as for quantitative determination of T-2 and HT-2 toxins in wheat.     

HPLC separation of nitrogen-containing compounds on silica gel modified with gold nanoparticles stabilized by chitosan

The potentialities of using silica gel modified with gold nanoparticles stabilized by chitosan are evaluated in the normal phase of HPLC as an example of the separation of aniline and pyridine derivatives, as well as triazole fungicides by elution with mixtures of hexane with isopropyl alcohol, isobutanol, or chloroform. The influence of the nature and content of the polar additive on the efficiency and separation selectivity of the column have been studied. The possibility of separating mixtures containing penconazole, propiconazole, diniconazole, difenoconazole, and aminopyridines is shown.     

Development of a rapid method for the quantitative determination of deoxynivalenol using Quenchbody

Quenchbody (Q-body) is a novel fluorescent biosensor based on the antigen-dependent removal of a quenching effect on a fluorophore attached to antibody domains. In order to develop a method using Q-body for the quantitative determination of deoxynivalenol (DON), a trichothecene mycotoxin produced by some Fusarium species, anti-DON Q-body was synthesized from the sequence information of a monoclonal antibody specific to DON. When the purified anti-DON Q-body was mixed with DON, a dose-dependent increase in the fluorescence intensity was observed and the detection range was between 0.0003 and 3 mg L⁻¹. The coefficients of variation were 7.9% at 0.003 mg L⁻¹, 5.0% at 0.03 mg L⁻¹ and 13.7% at 0.3 mg L⁻¹, respectively. The limit of detection was 0.006 mg L⁻¹ for DON in wheat. The Q-body showed an antigen-dependent fluorescence enhancement even in the presence of wheat extracts. To validate the analytical method using Q-body, a spike-and-recovery experiment was performed using four spiked wheat samples. The recoveries were in the range of 94.9–100.2%. The concentrations of DON in twenty-one naturally contaminated wheat samples were quantitated by the Q-body method, LC-MS/MS and an immunochromatographic assay kit. The LC-MS/MS analysis showed that the levels of DON contamination in the samples were between 0.001 and 2.68 mg kg⁻¹. The concentrations of DON quantitated by LC-MS/MS were more strongly correlated with those using the Q-body method (R² = 0.9760) than the immunochromatographic assay kit (R² = 0.8824). These data indicate that the Q-body system for the determination of DON in wheat samples was successfully developed and Q-body is expected to have a range of applications in the field of food safety.     

Rapid detection of nivalenol and deoxynivalenol in wheat using surface plasmon resonance immunoassay

A surface plasmon resonance (SPR) immunoassay using a monoclonal antibody was developed to measure nivalenol (NIV) and deoxynivalenol (DON) contamination in wheat. A highly sensitive and stable DON-immobilized sensor chip was prepared, and an SPR detection procedure was developed. The competitive inhibition assay used a monoclonal antibody that cross-reacts with NIV and DON. The half maximal inhibitory concentration (IC₅₀) values of the SPR assay were 28.8 and 14.9 ng mL⁻¹ for NIV and DON, respectively. The combined responses of NIV and DON in wheat were obtained using a simultaneous detection assay in a one-step cleanup procedure. NIV and DON were separated using a commercial DON-specific immunoaffinity column (IAC) and their responses were obtained using an independent detection assay. Spiked tests using these toxins revealed that recoveries were in the range 91.5-107% with good relative standard deviations (RSDs) (0.40-4.1%) and that detection limits were 0.1 and 0.05 mg kg⁻¹ for NIV and DON, respectively. The independent detection using IAC showed detection limits of 0.2 and 0.1 mg kg⁻¹ for NIV and DON, respectively. SPR analysis results were correlated with those obtained using a conventional LC/MS/MS method for wheat co-contaminated with NIV and DON. These results suggested that the developed SPR assay is a practical method to rapidly screen the NIV and DON co-contamination of wheat and one of a very few immunoassays to detect NIV directly.     

A Multifunctional N-Doped Cu–MOFs (N–Cu–MOF) Nanomaterial-Driven Electrochemical Aptasensor for Sensitive Detection of Deoxynivalenol

Deoxynivalenol (DON) is one of the most common mycotoxins in grains, causing gastrointestinal inflammation, neurotoxicity, hepatotoxicity and embryotoxicity, even at a low quantity. In this study, a facile electrochemical aptasensor was established for the rapid and sensitive determination of DON based on a multifunctional N-doped Cu-metallic organic framework (N–Cu–MOF) nanomaterial. The N–Cu–MOF, with a large specific surface area and good electrical conductivity, served not only as an optimal electrical signal probe but also as an effective supporting substrate for stabilizing aptamers through the interactions of amino (-NH₂) and copper. Under the optimal conditions, the proposed sensor provided a wide linear concentration range of 0.02–20 ng mL⁻¹ (R² = 0.994), showing high sensitivity, with a lower detection limit of 0.008 ng mL⁻¹, and good selectivity. The sensor’s effectiveness was also verified in real spiked wheat samples with satisfactory recoveries of 95.6–105.9%. The current work provides a flexible approach for the rapid and sensitive analysis of highly toxic DON in food samples and may also be easily extended to detect other hazardous substances with alternative target-recognition aptamers.     

Enantioselective determination of triazole fungicide simeconazole in vegetables, fruits, and cereals using modified QuEChERS (quick, easy, cheap, effective, rugged and safe) coupled to gas chromatography/tandem mass spectrometry

A rapid and effective method for enantioselective determination of simeconazole enantiomers in food products (cucumber, tomato, apple, pear, wheat and rice) has been developed. The enantiomers were resolved by capillary gas chromatography (GC) using a commercial chiral column (BGB-172) and a temperature program from 150 °C (held for 1 min) and then raised at 10 °C min⁻¹ to 240 °C (held for 10 min). This enantioselective gas chromatographic separation was combined with a clean-up/enrichment procedure based on the modification of QuEChERS (quick, easy, cheap, effective, rugged and safe) method. Co-extractives were removed with graphitized carbon black/primary secondary amine (GCB/PSA) solid-phase extraction (SPE) cartridges using acetonitrile:toluene (3:1, v/v) as eluent. Gas chromatography/ion trap mass spectrometry (GC–ITMS) with electron ionization (EI) was then used for qualitative and quantitative determination of the simeconazole enantiomers. Two precursor-to-product ion transitions (m/z 121–101 and 195–153) with the best signal intensity were chosen to build the multiple-reaction monitoring (MRM) acquisition method. The limits of detection for each enantiomer of simeconazole in six food products ranged between 0.4 and 0.9 μg kg⁻¹, which were much lower than maximum residue levels (MRLs) established by Japan. The methodology was successfully applied for the enantioselective analysis of simeconazole enantiomers in real samples, indicating its efficacy in investigating the environmental stereochemistry of simeconazole in food matrix.     

High-performance chiral separation of fourteen triazole fungicides by sulfated beta-cyclodextrin-mediated capillary electrophoresis

In this paper, sulfated beta-cyclodextrin-mediated capillary electrophoresis (CE) is evaluated as a new approach for the chiral separation of triazole-type fungicides. The 14 fungicides investigated were bitertanol, cyproconazole, difenoconazole, diniconazole, flutriafol, hexaconazole, myclobutanil, paclobutrazol, penconazole, propiconazole, tebuconazole, tetraconazole, triadimefon and triadimenol. Under the optimal conditions, excellent enantioseparation was achieved for all the 14 fungicides, including those fungicides containing two chiral centers. To our knowledge, this is the only system to date that offers outstanding enantiodiscrimination towards all triazole-type fungicides. The impact of the molecular structures of the triazole compounds on their migration behavior was studied. Similar to other chemical systems involving host-guest complexation, the interaction between sulfated beta-cyclodextrin and the triazole compounds was found to be affected by a variety of factors, including electrostatic force, hydrogen bonding, steric effect and hydrophobicity. These factors, coupled with the countercurrent electroosmotic flow (EOF), were believed to be the major forces behind the exceptional chiral selectivity.     

Analysis of trace levels of trichothecene mycotoxins in Austrian cereals by gas chromatography with electron capture detection

Summary Various analytical methods developed for trichothecene determination, including TLC, HPLC, GC, supercritical fluid chromatography (SFC) and enzyme immuno assay (EIA) are reviewed. In addition a new method is described for the simultaneous determination of the trichothecene mycotoxins deoxynivalenol (DON), nivalenol (NIV), 3-acetyldeoxynivalenol (3-ADON), diacetoxyscirpenol (DAS), T-2 toxin (T-2), HT-2 toxin (HT-2) and T-2 triol (TRIOL), in Austrian wheat and corn samples by GC-ECD. A clean-up procedure has been developed using a combination of liquid-liquid and liquid-solid extraction. Trichothecenes were detected as their heptafluorobuturyl esters or alternatively as trimethylsilyl ethers (only sensitive for deoxynivalenol and nivalenol) using nandrolone or chloramphenicol as internal standard. Four derivatization techniques using HFBI, HFBA+DMAP on polystyrene, TMSI and TMSI+BSA+TMCS have been studied and the advantages and disadvantages of each are discussed. Quantification of trichothecenes from 10 to 1000 ppb in cereals could be accomplished routinely.Presented at the 19th ISC, Aix-en-Provence, France, September 13–18, 1992.     

Quantification of deoxynivalenol in wheat using an immunoaffinity column and liquid chromatography

A simple and accurate method to quantify the mycotoxin deoxynivalenol (DON) in wheat is described. The method uses immunoaffinity chromatography for DON isolation and liquid chromatography (LC) for toxin detection and quantification. Wheat samples are extracted in water, filtered twice and applied to an immunoaffinity column. Following a water wash, DON is eluted from the column with methanol and injected onto an LC system with a UV detector for quantification. Test performance was evaluated in terms of antibody specificity, limit of detection, percentage recovery, precision, column capacity, assay linearity and comparison with the GC-electron-capture detection (ECD) method of Tacke and Casper. Specificity of the immunoaffinity column cleanup procedure was confirmed with only DON (>80%) and its 15-C derivatives (40-50%) being recognized by the antibody while 3-C DON derivatives, nivalenol, T-2 and fusarenon-X did not bind. The limit of detection is at least 0.10 microg/g. Percentage recovery for the entire assay range averages 90% with an average relative standard deviation of 8.3%. Naturally contaminated samples showed comparable precision. Column capacity was determined to be 3.3 microg. The assay showed a high degree of linearity (r2=0.999) and an optimum assay range of 0.10 to 10.0 microg/g. Comparative analysis of 28 naturally or artificially contaminated wheat samples using DONtest-HPLC and the GC-ECD method of Tacke and Casper showed that DONtest-HPLC is a statistically significant predictor of the GC-ECD method (r2=0.982).     

Simultaneous detection of A and B trichothecenes by gas chromatography with flame ionization or mass selective detection

A clean-up cartridge consisting of ammonium sulfate, celite, alumina, charcoal and C18 was developed for the simultaneous detection of A and B type trichothecenes, namely 4,15-diacetoxy-scirpenol, T2-toxin, deoxynivalenol (DON) and nivalenol (NIV). After derivatization with N,N-dimethyl-trimethylsilyl-carbamate, the purified extracts were analyzed by gas chromatography with flame ionization (GC-FID) or mass selective detection (GC-MSD). Using this cartridge, no further sample clean-up steps are required that makes the developed method time and cost effective. The method is easy to implement; no special experience or instrumentation is required. The limits of detection in semolina and corn grits ranged from 0.30 to 0.47 mg kg⁻¹ for GC-FID and from 0.05 to 0.35 mg kg⁻¹ for GC-MSD. Corn gluten feed (CGF) samples were analyzed as well, for 4,15-diacetoxy-scirpenol and T2 toxin, with a limit of detection of 0.23 and 0.14 mg kg⁻¹, respectively.     

Lateral-flow colloidal gold-based immunoassay for the rapid detection of deoxynivalenol with two indicator ranges

A lateral-flow immunoassay using a colloidal gold-labelled monoclonal antibody was developed for the rapid detection of deoxynivalenol (DON). Different parameters, such as the amount of immunoreagents, type of the materials, composition of the blocking solution and of the detector reagent mixture, were investigated to provide the optimum assay performance. The experimental results demonstrated that such a visual test had an indicator range rather than a cut-off value. Thus, tests for DON determination with two different indicator ranges of 250-500 and 1000-2000 μg kg⁻¹ were designed. The method allowed detection of DON at low and high concentration levels, which could be useful for research and practical purposes. The assay applied to spiked wheat and pig feed samples demonstrated accurate and reproducible results. The applicability of the developed lateral-flow test was also confirmed under real field conditions. The test strips prepared in Belgium were sent to Mexico, where they were used for the screening of DON contamination in different bread wheat entries from Fusarium Head Blight inoculated plots. The results were compared with those obtained by ELISA and LC-MS/MS. A poor correlation between ELISA and LC-MS/MS was observed. Visual results of the dipstick tests were in a good agreement with the results of the LC-MS/MS method. Coupled with a simple and fast sample preparation, this qualitative one-step test based on the visual evaluation of results did not require any equipment. Results could be obtained within 10 min. The described assay format can be used as a simple, rapid, cost-effective and robust on-site screening tool for mycotoxin contamination in different agricultural commodities.     

Determination of deoxynivalenol, T-2 and HT-2 toxins in a bread model food by liquid chromatography-high resolution-Orbitrap-mass spectrometry equipped with a high-energy collision dissociation cell

A sensitive and accurate method employing a single stage high resolution mass spectrometer equipped with a high-energy collision-dissociation cell (HCD) for the simultaneous determination of deoxynivalenol (DON), T-2 toxin (T-2) and HT-2 toxin (HT-2) in a processed bread model food has been developed. Two sample pre-treatment routes for the extraction of these mycotoxins were investigated, based on Mycosep^® column clean up or QuEChERS-like procedure, respectively. The former approach suffered less from matrix effects and allowed to achieve in bread samples LODs of 7, 12 and 17 ng/g for T-2, HT-2 and DON, respectively, with 0.5 ppm mass accuracy. Two acquisition modes, full scan MS and all ion fragmentation, exploiting the fragmentation features offered by an HCD chamber and integrated within the Orbitrap analyser, were compared for quantitative purposes. The method was applied to investigate the degradation of these mycotoxins during bread processing using a bread model food. Most T-2 hydrolyzed to HT-2 during dough preparation, and about 20–30% of HT-2 and DON was degraded during bread baking.     

Use of the modified quick easy cheap effective rugged and safe sample preparation approach for the simultaneous analysis of type A- and B-trichothecenes in wheat flour

A suitable extraction and purification method for the simultaneous liquid chromatography–mass spectrometry (LC–MS) determination of five mycotoxins, three type A, diacetoxyscirpenol (DAS), T-2 toxin (T-2) and HT-2 toxin (HT-2), and two type B-trichothecenes, deoxynivalenol (DON) and nivalenol (NIV), has been optimised using a modified “Quick Easy Cheap Effective Rugged and Safe” (QuEChERS) method. Different solvents were studied in the extraction procedure to obtain better recoveries, which ranged from 86 to 108%, using a 85/15 (v/v) mixture of methanol/acetonitrile. The values obtained for recovery, repeatability and reproducibility of the optimized method are in agreement with Commission Directive 2005/26/EC for methods of analysis of Fusarium toxins. Finally, this optimized procedure was applied in wheat flour samples commercialized in Spain.     

Determination of fungicides in wine by mixed-mode solid phase extraction and liquid chromatography coupled to tandem mass spectrometry

A novel procedure for the determination of nine selected fungicides (metalaxyl-M, azoxystrobin, myclobutanil, flusilazole, penconazole, tebuconazole, propiconazole, diniconazole and difenoconazole) in wine samples is presented. Sample enrichment and purification is simultaneously performed using mixed-mode, anion exchange and reversed-phase, OASIS MAX solid-phase extraction (SPE) cartridges. Analytes were determined by liquid chromatography coupled to tandem mass spectrometry using atmospheric pressure electrospray ionization (LC-ESI-MS/MS). Parameters affecting the chromatographic determination and the extraction-purification processes were thoroughly investigated. Under optimized conditions, 10 mL of wine were firstly diluted 1:1 with ultrapure water and then passed through the mixed-mode SPE cartridge at a flow of ca. 5 mLmin(-1). After a washing step with 5 mL of an aqueous NH(4)OH solution (5%, w:v), analytes were recovered with just 1 mL of methanol and injected in the LC-MS/MS system without any additional purification. The selective extraction process avoided significant changes in the ionization efficiency for red and white wine extracts in comparison with pure standards in methanol. Performance of the method was good in terms of precision (RSDs<11%) and accuracy (absolute recoveries>72%, determined against pure standards in methanol) reporting method LOQs in the range of 0.01-0.79 ngmL(-1) for target compounds, which are far below the EU maxima residue levels (MRLs) for fungicides in vinification grapes and wine. Several commercial wines from different geographic areas in Spain were analyzed. In most samples, metalaxyl-M and azoxystrobin were found at concentrations up to several ngmL(-1).     

Development of a colloidal gold-based lateral-flow immunoassay for the rapid simultaneous detection of zearalenone and deoxynivalenol

A multianalyte lateral-flow technique using colloidal gold-labeled monoclonal antibodies was developed for the rapid simultaneous detection of deoxynivalenol (DON) and zearalenone (ZEA). The results of this qualitative one-step test were interpreted visually. A very simple and fast sample preparation was used, and the assay procedure could be accomplished within 10 min. When applied to spiked wheat samples, the technique gave accurate and reproducible results. Cut-off levels of 1500 and 100 μg kg⁻¹ for DON and ZEA, respectively, were observed. The described multianalyte format can be used as a reliable, rapid and cost-effective on-site screening technique for the simultaneous determination of mycotoxins in grain samples.     

Development of One-Step Non-Solvent Extraction and Sensitive UHPLC-MS/MS Method for Assessment of N-(n-Butyl) Thiophosphoric Triamide (NBPT) and N-(n-Butyl) Phosphoric Triamide (NBPTo) in Milk

N-(n-butyl) thiophosphoric triamide (NBPT) is a urease inhibitor utilised in urea-based fertilizers. In Ireland, fertilizer treated with NBPT is applied to pasture to mitigate both ammonia and nitrous oxide emissions, but concerns arise as to the potential for residues in milk products. A quick ultrafiltration extraction and ultra-high performance liquid chromatography coupled with mass spectrometry triple quadrupole (UHPLC-MS/MS) quantitation method was developed and validated in this study. The method was applied in the analysis of samples collected from a field study investigating potential transfer of NBPT residues into milk. NBPT and NBPTo residues, were extracted from fortified milk samples and analysed on a UHPLC-MS/MS with recoveries ranging from 74 to 114%. Validation of the UHPLC-MS/MS method at low (0.0020 mg kg⁻¹) and high (0.0250 mg kg⁻¹) concentration levels in line with SANTE/12682/2019 showed overall trueness in the range of 99 to 104% and precision between 1 and 10%, RSD for both compounds. The limit of quantitation (LOQ) was 0.0020 mg kg⁻¹ and other tested parameters (linearity, sensitivity, specificity, matrix effect, robustness, etc.) satisfied acceptance criteria. Stability assessment using spiked samples revealed the compounds were stable in raw and pasteurised milk for 4 weeks at –80 °C storage temperature. Maintaining samples at pH 8.5–9.0 further improved stability. Analysis of 516 milk samples from the field study found that NBPT and NBPTo concentrations were below the LOQ of 0.0020 mg kg⁻¹, thus suggesting very low risk of residues occurring in the milk. The method developed is quick, robust, and sensitive. The method is deemed fit-for-purpose for the simultaneous determination of NBPT and NBPTo in milk.     

Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg⁻¹ for Capsicum and 0.10 to 9.55 µg·kg⁻¹ (LOD) and 0.35 to 33.43 µg·kg⁻¹ (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSD_wR) by spiking of mixed pesticides standards at 100 µg·kg⁻¹ recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.     

Characterization of Phenolic Compounds,Vitamin E and Fatty Acids from Monovarietal Virgin Olive Oils of “Picholine marocaine” Cultivar

Olive oil is an important product in the Mediterranean diet, due to its health benefits and sensorial characteristics. Picholine marocaine is the most cultivated variety in Morocco. The present research aims to evaluate the phenolic compounds, vitamin E and fatty acids of commercial Picholine marocaine virgin olive oils (VOOs) from five different North Moroccan provinces (Chefchaouen, Taounate, Errachidia, Beni Mellal and Taza), using HPLC-photodiode array (PDA)/electrospray ionization (ESI)-MS, normal phase (NP)-HPLC/ fluorescence detector (FLD) and GC-flame ionization detector (FID)/MS, respectively. The obtained results showed an average content of 130.0 mg kg⁻¹ of secoiridoids (oleuropein aglycone, 10-hydroxy-oleuropein aglycone and ligstroside aglycone, oleocanthal and oleacein), 108.1 mg kg⁻¹ of phenolic alcohols (tyrosol and hydroxytyrosol), 34.7 mg kg⁻¹ of phenolic acids (caffeic acid, ferulic acid and elenolic acid), and 8.24 mg kg⁻¹ of flavonoids (luteolin, luteolin glucoside, apigenin). With regard to vitamin E, α-tocopherol was the most abundant vitamin E (57.9 mg kg⁻¹), followed by α-tocotrienol (2.5 mg kg⁻¹), γ-tocopherol (4.5 mg kg⁻¹) and β-tocopherol (1.9 mg kg⁻¹), while δ-tocopherol was not detected. Moreover, 14 fatty acids were found and, among them, oleic acid (76.1%), linoleic acid (8.1%) palmitic acid (8.7%) and stearic acid (2.5%) were the major fatty acids detected. Finally, heat map and principal component analysis allowed us to classify the studied provinces in terms of VOO chemical composition: Chefchaouen (tyrosol and hydroxytyrosol), Taounate (oleuropein aglycone), Errachidia (ferulic acid, w-3 and w-6), Beni Mellal (oleocanthal) and Taza (luteolin and oleic acid).     

Mechanisms of Tebuconazole Adsorption in Profiles of Mineral Soils

The study attempted to identify the soil components and the principal adsorption mechanisms that bind tebuconazole in mineral soils. The K_F values of the Freundlich isotherm determined in 18 soils from six soil profiles in batch experiments after 96 h of shaking ranged from 1.11 to 16.85 μg^1−1/n (mL)^1/n g⁻¹, and the exponent 1/n values from 0.74 to 1.04. The adsorption of tebuconazole was inversely correlated with the soil pH. Both neutral and protonated forms of this organic base were adsorbed mainly on the fraction of humins. The adsorption of the protonated form increased in the presence of hydrogen cations adsorbed in the soil sorption sites. Fourier transform infrared spectroscopy coupled with the molecular modeling studies and partial least squares regression analysis indicated that the tebuconazole molecule is bound in the organic matter through the formation of hydrogen bonds as well as hydrophobic and π–π interactions. Ion exchange was one of the adsorption mechanisms of the protonated form of this fungicide. The created mathematical model, assuming that both forms of tebuconazole are adsorbed on the organic matter and adsorption of the protonated form is affected by the potential acidity, described its adsorption in soils well.     

Analysis of Kojic Acid Derivatives as Competitive Inhibitors of Tyrosinase: A Molecular Modeling Approach

Tyrosinases belong to the functional copper-containing proteins family, and their structure contains two copper atoms, in the active site, which are coordinated by three histidine residues. The biosynthesis of melanin in melanocytes has two stages depending on the actions of the natural substrates L-DOPA and L-tyrosine. The dysregulation of tyrosinase is involved in skin cancer initiation. In the present study, using molecular modeling tools, we analyzed the inhibition activity of tyrosinase activity using kojic acid (KA) derivatives designed from aromatic aldehydes and malononitrile. All derivatives showed conformational affinity to the enzyme active site, and a favorable distance to chelate the copper ion, which is essential for enzyme function. Molecular dynamics simulations revealed that the derivatives formed promising complexes, presenting stable conformations with deviations between 0.2 and 0.35 Å. In addition, the investigated KA derivatives showed favorable binding free energies. The most stable KA derivatives showed the following binding free energies: −17.65 kcal mol⁻¹ (D6), −18.07 kcal mol⁻¹ (D2), −18.13 (D5) kcal mol⁻¹, and −10.31 kcal mol⁻¹ (D4). Our results suggest that these derivatives could be potent competitive inhibitors of the natural substrates of L-DOPA (−12.84 kcal mol⁻¹) and L-tyrosine (−9.04 kcal mol⁻¹) in melanogenesis.