Fabrication of Superhydrophobic and Superoleophilic Polystyrene Surfaces by a Facile One‐Step Method

A facile one‐step method has been developed to prepare both superhydrophobic and superoleophilic surfaces of polystyrene (PS) without any chemical modification. A rough film consisting of micro‐bead and nano‐fiber mixed structures is formed by spraying a PS solution onto a large area and any type of substrate. The mixed structures with such unique wettability properties can be used in oil/water separation and as oil sorbents.

     

A Facile Method for Preparation of Superhydrophobic Surfaces with Poly(furfuryl Alcohol)/PTFE Composites

A stable superhydrophobic surface have been fabricated with poly(furfuryl alcohol) (PFA)/polytetrafluoroethylene (PTFE) composite coatings on steel substrates by using a facile method. The observation of field emission scanning electron microscopy revealed that the hierarchical microstructures formed on the surfaces are controlled by varying the curing temperature. This method can be easily operated on substrates of steel, therefore is readily developed to other engineering metal substrates such as aluminum, copper, etc.     

化学/电化学腐蚀法快速制备超疏水金属铝

提出一种金属铝超疏水表面的快速制作方法. 先以化学腐蚀在铝表面形成微米级粗糙结构, 再通过电化学腐蚀构筑纳米结构, 在20 min内完成了超疏水表面所需粗糙结构的制备. 这种化学腐蚀/电化学腐蚀两步法比单独化学或电化学腐蚀方法在时间上缩短了1~2个数量级, 且不受铝材晶形限制, 同时电化学腐蚀所用电流密度也降低了1个数量级, 降低了对电源设备的要求, 可望大规模应用于工业生产和其它金属的超疏水表面制备.     

A Novel Aptamer-Imprinted Polymer-Based Electrochemical Biosensor for the Detection of Lead in Aquatic Products

Lead contamination in aquatic products is one of the main hazard factors. The aptasensor is a promising detection method for lead ion (Pb(II)) because of its selectivity, but it is easily affected by pH. The combination of ion-imprinted polymers(IIP) with aptamers may improve their stability in different pH conditions. This paper developed a novel electrochemical biosensor for Pb(II) detection by using aptamer-imprinted polymer as a recognition element. The glassy carbon electrode was modified with gold nanoparticles and aptamers. After the aptamer was induced by Pb(II) to form a G-quadruplex conformation, a chitosan-graphene oxide was electrodeposited and cross-linked with glutaraldehyde to form an imprint layer, improving the stability of the biosensor. Under the optimal experimental conditions, the current signal change (∆I) showed a linear correlation of the content of Pb(II) in the range of 0.1–2.0 μg/mL with a detection limit of 0.0796 μg/mL (S/N = 3). The biosensor also exhibited high selectivity for the determination of Pb(II) in the presence of other interfering metal ion. At the same time, the stability of the imprinted layer made the sensor applicable to the detection environment with a pH of 6.4–8.0. Moreover, the sensor was successfully applied to the detection of Pb(II) in mantis shrimp.     

Influence of Aliphatic Chain Length on Structural,Thermal and Electrochemical Properties of n-alkylene Benzyl Alcohols: A Study of the Odd–Even Effect

The century-old, well-known odd–even effect phenomenon is still a very attractive and intriguing topic in supramolecular and nano-scale organic chemistry. As a part of our continuous efforts in the study of supramolecular chemistry, we have prepared three novel aromatic alcohols (1,2-bis[2-(hydroxymethyl)phenoxy]butylene (Do4OH), 1,2-bis[2-(hydroxymethyl)phenoxy]pentylene (Do5OH) and 1,2-bis[2-(hydroxymethyl)phenoxy]hexylene (Do6OH)) and determined their crystal and molecular structures by single-crystal X-ray diffraction. In all compounds, two benzyl alcohol groups are linked by an aliphatic chain of different lengths (CH₂)_n; n = 4, 5 and 6. The major differences in the molecular structures were found in the overall planarity of the molecules and the conformation of the aliphatic chain. Molecules with an even number of CH₂ groups tend to be planar with an all-trans conformation of the aliphatic chain, while the odd-numbered molecule is non-planar, with partial gauche conformation. A direct consequence of these structural differences is visible in the melting points—odd-numbered compounds of a particular series display systematically lower melting points. Crystal and molecular structures were additionally studied by the theoretical calculations and the melting points were correlated with packing density and the number of CH₂ groups. The results have shown that the generally accepted rule, higher density = higher stability = higher melting point, could not be applied to these compounds. It was found that the denser packaging causes an increase in the percentage of repulsive H‧‧‧H interactions, thereby reducing the stability of the crystal, and consequently, the melting points. Another interesting consequence of different molecular structures is their electrochemical and antioxidative properties—a non-planar structure displays the highest oxidation peak of hydroxyl groups and moderate antioxidant activity.     

High Performance Liquid Chromatography–Tandem Mass Spectrometry Method for Correlating the Metabolic Changes of Lactate,Pyruvate and L-Glutamine with Induced Tamoxifen Resistant MCF-7 Cell Line Potential Molecular Changes

Breast cancer is one of the most prevalent cancers worldwide usually treated with Tamoxifen. Tamoxifen resistance development is the most challenging issue in an initially responsive breast tumor, and mechanisms of resistance are still under investigation. The objective of this study is to develop and validate a selective, sensitive, and simultaneous high performance liquid chromatography–tandem mass spectrometry method to explore the changes in substrates and metabolites in supernatant media of developed Tamoxifen resistance MCF-7 cells. We focus on the determination of lactate, pyruvate, and L-glutamine which enables the tracking of changes in metabolic pathways as a result of the resistance process. Chromatographic separation was achieved within 3.5 min. using a HILIC column (4.6 × 100 mm, 3.5 µm particle size) and mobile phase of 0.05 M acetic acid–ammonium acetate buffer solution pH 3.0: Acetonitrile (40:60 v/v). The linear range was 0.11–2.25, 0.012–0.227, and 0.02–0.20 mM for lactate, pyruvate, and L-glutamine, respectively. Within- and between-run accuracy was in the range 98.94-105.50% with precision (CV, %) of ≤0.86%. The results revealed a significant increase in both lactate and pyruvate production after acquiring the resistant. An increase in L-glutamine levels was also observed and could be attributed to its over production or decline in its consumption. Therefore, further tracking of genes responsible of lactate, pyruvate, and glutamine metabolic pathways should be performed in parallel to provide in-depth explanation of resistance mechanism.