Derivatisation reactions in the chromatographic analysis of chemical warfare agents and their degradation products

The analysis of chemical warfare agents and their degradation products is an important component of verification of compliance with the Chemical Weapons Convention. Gas and liquid chromatography, particularly combined with mass spectrometry, are the major techniques used to detect and identify chemicals of concern to the Convention. The more polar analytes, and some of the more reactive or highly volatile agents, are usually derivatised to facilitate chromatography, and to impart properties beneficial for detection. This review focuses on derivatisation reactions used in the chromatographic analysis of chemical warfare agents, their degradation products and metabolites.     

Analysis of ethoxylated nonionic surfactants and their metabolites by liquid chromatography/atmospheric pressure ionization mass spectrometry.

The widespread use and questionable environmental acceptability of nonionic surfactants make the alkylphenol ethoxylates (APEOs) and their neutral and acidic degradation products a focus of interest in environmental analytical chemistry. The characterization and especially quantification of polyethoxylate mixtures in environmental matrices is a challenge, because of the complexity of the mixtures. A review on trace analysis of APEOs using atmospheric pressure ionization mass spectrometry, including sample preparation and liquid chromatographic separation, is presented. In this Special Feature, the performances of two ionization methods, atmospheric pressure chemical ionization and electrospray ionization, is discussed in terms of selectivity and sensitivity toward oligomeric mixtures of APEOs. Capabilities and limitations associated with the liquid chromatographic/mass spectrometric detection of APEOs, their main degradation products and their halogenated metabolites, and also specific issues related to the sample preparation, formation of fragments, adducts and cluster ions, quantification of oligomeric mixtures and signal suppression effects in complex matrices, are discussed. Conclusions and future perspectives are outlined.     

Forensic applications of ambient ionization mass spectrometry

This review highlights and critically assesses forensic applications in the developing field of ambient ionization mass spectrometry. Ambient ionization methods permit the ionization of samples outside the mass spectrometer in the ordinary atmosphere, with minimal sample preparation. Several ambient ionization methods have been created since 2004 and they utilize different mechanisms to create ions for mass-spectrometric analysis. Forensic applications of these techniques—to the analysis of toxic industrial compounds, chemical warfare agents, illicit drugs and formulations, explosives, foodstuff, inks, fingerprints, and skin—are reviewed. The minimal sample pretreatment needed is illustrated with examples of analysis from complex matrices (e.g., food) on various substrates (e.g., paper). The low limits of detection achieved by most of the ambient ionization methods for compounds of forensic interest readily offer qualitative confirmation of chemical identity; in some cases quantitative data are also available. The forensic applications of ambient ionization methods are a growing research field and there are still many types of applications which remain to be explored, particularly those involving on-site analysis. Aspects of ambient ionization currently undergoing rapid development include molecular imaging and increased detection specificity through simultaneous chemical reaction and ionization by addition of appropriate chemical reagents.     

Analysis of degradation products of chemical warfare agents using capillary electrophoresis

Analysis of chemical warfare agents (CWAs), their precursors and degradation products (DPs) is an important verification component in support of the Chemical Weapons Convention and urgently demanding rapid and reliable analytical methods. Considering a growing number of papers presented in the last years in the field of capillary electrophoresis (CE) of DPs, this review article gives an overview on CE techniques which are feasible for the determination of DPs with the advantages of using relatively simple and inexpensive research instrumentation, reduced consumption of potentially toxic samples, shorter sample preparation times, etc. A brief introduction is provided into the chemical background of CWAs followed by a documented appraisal that the CE method is well suited to deal with polar, acidic DPs mostly occurring in aqueous samples or extracts. Applications of CE to the separation of DPs are described, complemented by a critical discussion of the detection techniques, including mostly conductivity, laser-induced fluorescence, UV absorption and mass spectrometry. This review also includes actual development regarding the challenges of CE in analyses of different DPs from real samples, often avoided by in- and off-line pre-concentration techniques or the coupling of CE to selective detection methods. Special emphasis is placed on the miniaturised CE systems that have the potential of being before long developed into a field deployable and potentially disposable platform for routine DP monitoring in environmental samples.     

Screening hydrolysis products of sulfur mustard agents by high-performance liquid chromatography with inductively coupled plasma mass spectrometry detection

Sulfur mustard (HD), bis(2-chloroethyl)sulfide, is one of a class of mustard agents which are chemical warfare agents. The main chemical warfare hydrolysis degradation products of sulfur mustards are: thiodiglycol, bis(2-hydroxyethylthio)methane, 1,2-bis(2-hydroxyethylthio)ethane, 1,3-bis(2-hydroxyethylthio)propane, and 1,4-bis(2-hydroxyethylthio)butane. The aim of this study is to identify these five hydrolysis degradation products utilizing reversed-phase high-performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP-MS) for element-specific sulfur detection using a collision/reaction cell and electrospray ionization mass spectrometry to confirm the identification. To date, this is the first study utilizing ICP-MS with ³²S element-specific detection for the analysis of vesicant chemical warfare agent degradation products.     

Mass spectrometric analysis of chemical warfare agents and their degradation products in soil and synthetic samples

A packed capillary liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method was developed for the identification of chemical warfare agents, their degradation products and related compounds in synthetic tabun samples and in soil samples collected from a former mustard storage site. A number of organophosphorus and organosulfur compounds that had not been previously characterized were identified, based on acquired high-resolution ESI-MS data. At lower sampling cone voltages, the ESI mass spectra were dominated by protonated, sodiated and protonated acetonitrile adducts and/or their dimers that could be used to confirm the molecular mass of each compound. Structural information was obtained by inducing product ion formation in the ESI interface at higher sampling cone voltages. Representative ESI-MS mass spectra for previously uncharacterized compounds were incorporated into a database as part of an on-going effort in chemical warfare agent detection and identification. The same samples were also analyzed by capillary column gas chromatography (GC)-MS in order to compare an established method with LC-ESI-MS for chemical warfare agent identification. Analysis times and full-scanning sensitivities were similar for both methods, with differences being associated with sample matrix, ease of ionization and compound volatility. GC-MS would be preferred for organic extracts and must be used for the determination of mustard and relatively non-polar organosulfur degradation products, including 1,4- thioxane and 1,4-dithiane, as these compounds do not ionize during ESI-MS. Diols, formed following hydrolysis of mustard and longer-chain sulfur vesicants, may be analyzed using both methods with LC-ESI-MS providing improved chromatographic peak shape. Aqueous samples and extracts would, typically, be analyzed by LC-ESI-MS, since these analyses may be conducted directly without the need for additional sample handling and/or derivatization associated with GC-MS determinations. Organophosphorus compounds, including chemical warfare agents, related compounds and lower volatility hydrolysis products may all be determined during a single LC-ESI- MS analysis. Derivatization of chemical warfare agent hydrolysis products and other compounds with hydroxyl substitution would be required prior to GC-MS analysis, giving LC-ESI-MS a definite advantage over GC-MS for the analysis of samples containing chemical warfare agents and/or their hydrolysis products.     

Electrospray ionization mass spectral studies of N,N-dialkylaminoethane-2-sulphonic acids

Oxidative reactions of VX type compounds and N,N-dialkylaminoethane-2-thiols that are precursors for VX compounds produce N,N-dialkylaminoethane-2-sulphonic acids, N(R(1))(R(2))-CH(2)-CH(2)SO(3)H (where R(1) and R(2) = methyl, ethyl, n-propyl and isopropyl, 1-10), as the degradation products, and these degradation products are considered as markers for the detection of chemicals listed in the schedules of Chemical Weapons Convention (CWC) chemicals. Off-site detection of such degradation products in aqueous samples is an important task in the verification of CWC-related chemicals. Here we report a simple method involving the direct analysis of aqueous samples using positive and/or negative ion electrospray ionization (ESI) for the screening, detection and identification of N,N-dialkylaminoethane-2-sulphonic acids, avoiding sample preparation and chromatographic steps. The positive ion ESI mass spectra of all the compounds result in abundant [M+Na](+) ions, and the negative ion spectra show abundant [M-H](-) ions to confirm their molecular weight. The collision-induced dissociation spectra of [M+Na](+) and [M-H](-) give characteristic product ions by which it is easy to detect and identify all the studied N,N-dialkylaminoethane-2-sulphonic acids including those of isomeric compounds. The method is successfully applied to detect the spiked chemical, N,N-diisopropylaminoethane-2-sulphonic acid, present in a water sample received in a proficiency test.     

Measurement of Nitrogen Mustard Degradation Products by Poly(dimethylsiloxane) Microchip Electrophoresis with Contactless Conductivity Detection

A poly(dimethylsiloxane) (PDMS) microfluidic device with contactless conductivity detection for the determination of nitrogen mustard degradation products is reported. Three alkyl ethanolamines: N‐methyldiethanolamine (MDEA), N‐ethyldiethanolamine (EDEA), and triethanolamine (TEA), (degradation/ precursor products of HN‐1, HN‐2 and HN‐3 blister agents) were analyzed by microchip capillary electrophoresis (CE). The original PDMS channel was coated by poly(ethyleneimine) (PEI) to improve the separation of three ethanolamines. Experimental conditions for the separation and detection processes have been optimized to yield well defined separation and high sensitivity. The response times for the three ethanolamines were less than 5 min., the detection limits were 2.0–4.0 mg L^?1 and the relative standard derivations for the migration times and peak heights were 1.6–2.3% and 4.1–5.7%, respectively. The linearity of calibration for each of the compounds was as follows: MDEA, r²=0.970; EDEA, r²=0.994; TEA, r²=0.988. Applicability of this method for natural (lake and tap) water samples was also demonstrated. Compared to conventional analytical methods, this miniaturized system offers promise for on‐site monitoring of degradation products of the nitrogen mustard class of chemical warfare agents, with advantages of cost‐effective construction, simple operation, portability, and small required sample volumes.     

Determination of sulfonylurea degradation products in soil by liquid chromatography-ultraviolet detection followed by confirmatory liquid chromatography-tandem mass spectrometry.

A method based on liquid extraction followed by sample enrichment on reversed-phase solid-phase extraction was developed for the extraction of five degradation products of four sulfonylurea herbicides (chlorsulfuron, metsulfuron-methyl, thifensulfuron-methyl and tribenuron-methyl) from soil. The compounds have been quantified by LC-UV and identified by tandem LC-MS with electrospray ionization or atmospheric pressure chemical ionization. The limits of detection for the five compounds were between 10 and 50 micrograms kg-1. The method has been applied to the extraction of soil samples after microbial degradation of sulfonylurea herbicides.     

LC-MS analysis in the aquatic environment and in water treatment – a critical review

LC-MS has become an invaluable technique for trace analysis of polar compounds in aqueous samples of the environment and in water treatment. LC-MS is of particular importance due to the impetus it has provided for research into the occurrence and fate of polar contaminants, and of their even more polar transformation products. Mass spectrometric detection and identification is most widely used in combination with sample preconcentration, chromatographic separation and atmospheric pressure ionization (API). The focus of the first part of this review is directed particularly toward instruments and method development with respect to their applications for detecting emerging contaminants, microorganisms and humic substances (HS). The current status and future perspectives of 1) mass analyzers, 2) ionization techniques to interface liquid chromatography (LC) with mass spectrometry (MS), 3) methods for preconcentration and separation with respect to their application for water analysis are discussed and examples of applications are given. Quadrupole and ion trap mass analyzers with electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) are already applied in routine analysis. Time-of-flight (TOF) mass spectrometers are of particular interest for accurate mass measurements for identification of unknowns. For non-polar compounds, different ionization approaches have been described, such as atmospheric pressure photoionization (APPI), electrochemistry with ESI, or electron capture ionization with APCI. In sample preconcentration and separation, solid phase extraction (SPE) with different non-selective sorbent materials and HPLC on reversed-phase materials (RP-HPLC) play the dominant role. In addition, various on-line and miniaturized approaches for sample extraction and sample introduction into the MS have been used. Ion chromatography (IC), size-exclusion chromatography (SEC), and capillary electrophoresis (CE) are alternative separation techniques. Furthermore, the issues of compound identification, matrix effects on quantitation, development of mass spectral libraries and the topic of connecting analysis and toxicity bioassays are addressed.     

Ion-pair solid-phase extraction and gas chromatography-mass spectrometric determination of acidic hydrolysis products of chemical warfare agents from aqueous samples

The chemical warfare agents (CWA) degrade rapidly in aqueous samples and convert to acidic degradation products. Extraction and identification of the degradation products from complex matrices using simple sample preparation and sensitive detection and identification is the most important step in the off-site analysis of samples. In this present study, we report a simple sample preparation step based on ion-pair (IP) solid-phase extraction (SPE) for the extraction of acidic degradation products of CWA namely methyl, ethyl, propyl phosphonic acids, thiodiglycolic acid and benzilic acid. The analysis was performed on GC-MS in electron impact ionization mode. Three IP reagents triethylamine (TEA), tetrabutylammonium bromide (TBAB) and cetyltrimethyl ammonium bromide (CTAB) were used. The recoveries were estimated using the internal and external standard methods. The recovery of the compounds was almost negligible when TEA was used as IP reagent. The recoveries obtained when TBAB and CTAB were used as IP reagents were high and reproducible. The recovery of test chemicals is above 90%, except for methyl phosphonic acid and ethylphosphonic acid (20.6 +/- 3.2% and 35.8 +/- 2.5%, respectively). The minimum detection limits of the method were calculated for all chemicals in both full scan and selected ion monitoring modes. The test chemicals could be detected in microgram per litre quantities by the IP-SPE method.     

Review: derivatization in mass spectrometry--5. Specific derivatization of monofunctional compounds

The present paper is complementary to the foregoing reviews and describes some additional methods of the derivatization of particular functional groups mainly to enhance the structural information content of electron ionization and chemical ionization mass spectra. Derivatization approaches for the modification of unsaturated compounds, alcoholic, carboxylic, carbonyl, amine and other functional groups, are discussed. Derivatization for separation and quantitative determination of chiral enantiomeric compounds is also considered. Preliminary chemical and physicalchemical degradation for structure elucidation of high molecular weight compounds (biopolymers, synthetic polymers) is mentioned. Chemical aspects of derivatizations and characteristic mass spectral features of derivatives are described briefly. Some particular applications of chemical modification, in conjunction with mass spectral measurements for the analysis of various important bioorganic compounds and compounds in biological fluids, air, environmental etc., are considered.     

Rapid screening of N-oxides of chemical warfare agents degradation products by ESI-tandem mass spectrometry

Rapid detection and identification of chemical warfare agents and related precursors/degradation products in various environmental matrices is of paramount importance for verification of standards set by the chemical weapons convention (CWC). Nitrogen mustards, N,N-dialkylaminoethyl-2-chlorides, N,N-dialkylaminoethanols, N-alkyldiethanolamines, and triethanolamine, which are listed CWC scheduled chemicals, are prone to undergo N-oxidation in environmental matrices or during decontamination process. Thus, screening of the oxidized products of these compounds is also an important task in the verification process because the presence of these products reveals alleged use of nitrogen mustards or precursors of VX compounds. The N-oxides of aminoethanols and aminoethylchlorides easily produce [M + H]⁺ ions under electrospray ionization conditions, and their collision-induced dissociation spectra include a specific neutral loss of 48 u (OH + CH₂OH) and 66 u (OH + CH₂Cl), respectively. Based on this specific fragmentation, a rapid screening method was developed for screening of the N-oxides by applying neutral loss scan technique. The method was validated and the applicability of the method was demonstrated by analyzing positive and negative samples. The method was useful in the detection of N-oxides of aminoethanols and aminoethylchlorides in environmental matrices at trace levels (LOD, up to 500 ppb), even in the presence of complex masking agents, without the use of time-consuming sample preparation methods and chromatographic steps. This method is advantageous for the off-site verification program and also for participation in official proficiency tests conducted by the Organization for the Prohibition of Chemical Weapons (OPCW), the Netherlands. The structure of N-oxides can be confirmed by the MS/MS experiments on the detected peaks. A liquid chromatography-mass spectrometry (LC-MS) method was developed for the separation of isomeric N-oxides of aminoethanols and aminoethylchlorides using a C18 Hilic column. Critical isomeric compounds can be confirmed by LC-MS/MS experiments, after detecting the N-oxides from the neutral loss scanning method.

Application of microcolumn liquid chromatography and capillary electrophoresis with flame photometric detection for the screening of degradation products of chemical warfare agents in water and soil

Microcolumn liquid chromatography (microLC) and capillary electrophoresis (CE) coupled on-line with flame photometric detection (FPD) have been used for the screening of polar breakdown products of chemical warfare agents in water and soil samples, provided during Official Proficiency Tests organized by the Technical Secretariat of the Organization for the Prohibition of Chemical Weapons. CE-FPD is shown to be a powerful and rapid method for the determination of alkylphosphonic acids, which are the breakdown products of organophosphorus nerve agents. Gradient elution microLC-FPD is more sensitive and robust but less rapid in the determination of these compounds. In addition, microLC-FPD can be applied to screen for hydrolysis products of sulfur mustard and its analogues. Both methods can be applied without prior derivatization and are extremely selective. In order to unambiguously identify the relevant compounds, electrospray ionization (tandem) mass spectrometry, gas chromatography-mass spectrometry and nuclear magnetic resonance spectrometry were applied.     

Determination of 3,3′-Dichlorobenzidine and its degradation products in environmental samples with a small low-field Fourier transform ion cyclotron resonance mass spectrometer

3,3'-Dichlorobenzidine (DCB) and its degradation products, 3-chlorobenzidine (MCB) and benzidine, are of environmental concern because of their carcinogenic nature. The suitability of a small Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer for the analysis of these environmental contaminants in different types of matrices was explored. All the measurements were carried out by depositing the sample solution directly on a disk that was introduced into the mass spectrometer. This approach is very fast and simple because it requires no prior chromatographic separation or derivatization. Calibration curves determined by collecting 70-eV electron ionization mass spectra of neat samples yielded lower limits of detection of 29 and 17 pg (total amount on the solids probe) for DCB and benzidine, respectively (based on a signal to noise ratio of > or = 2:1), while chemical ionization with ammonia resulted in lower limits of detection of 21 pg for DCB and 9 pg for benzidine (total amount on the solids probe). FT-ICR analysis of sediments collected from Lake Macatawa (Holland, MI) verified the presence of DCB in this complex, environmentally significant sample matrix. Laboratory experiments designed to probe biodegradation and photodegradation pathways showed that DCB undergoes sequential dehalogenation to yield MCB and then benzidine under exposure to microorganisms and under simulated tropospheric solar radiation. The ability of the FT-ICR to determine elemental compositions of compounds introduced as described above was demonstrated for one of the degradation products.     

Determination of methylparaben,propylparaben, clotrimazole and its degradation products in topical cream by RP-HPLC

Summary Reversed-phase, high-performance liquid chromatographic (RP-HPLC) methods with UV detection were developed and validated for determination of compounds in a topical cream. The first method describes determination of the active component clotrimazole and two preservatives present in the cream; methylparaben and propylparaben. The second method describes determination of two degradation products of clotrimazole, imidazole and (2-chlorophenyl) diphenylmethanol, in a topical cream after long-term stability tests. Chromatographic separation was on a Purospher RP-18e column; the mobile phase in Method1 for separation of clotrimazole, methylparaben and propylparaben comprises acetonitrile and water (70:30 v/v). For determination of degradations products-imidazole and (2-chlorophenyl) diphenylmethanol—the optimum composition of mobile phase in Method2 was acetonitrile and water (75:25 v/v) apparent pH^* 2.7. Analysis time was <10 min for both methods. The methods were found to be applicable for routine analysis of the active compound clotrimazole, preservatives and degradation products in the pharmaceutical product: topical cream 1% Clotrimazol Cream. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Gas chromatographic-mass spectrometric characterisation of amiton and the recovery of amiton from concrete,paint, rubber and soil matrices

Amiton [O,O-diethyl S-[2-(diethylamino)ethyl] phosphorothiolate], is an organophosphorus chemical included in Schedule 2 of the Chemical Weapons Convention (CWC). Verification provisions under the CWC rely on the existence of a database of analytical information for scheduled chemicals and related compounds. Little analytical information is available for amiton. In this study, gas chromatography-mass spectrometry (GC-MS) characterisation of amiton and its typical impurities (including by-products and degradation products), supported by selective GC detection and 31P NMR data, was undertaken. Twenty-one compounds, including a by-product unique to amiton from an industrial source, were identified. Involatile degradation products of amiton were derivatised to enable their identification by GC-MS. The recovery of amiton from matrices that may be expected in an inspection scenario (i.e. concrete, paint, rubber and soil) was also examined. Paint and concrete matrices were the most useful matrices for the detection of amiton, and its by-products and degradation products. Amiton was readily detected in these matrices after 28 days.     

Relevance of analytical pyrolysis studies to biomass conversion

The principles and methods of soft ionization mass spectrometry in combination with pyrolysis of macromolecules are outlined. Essential features of the newly developed techniques are the extension of the recorded mass range and the almost exclusive formation of molecular ions of the pyrolyzates. Using field ionization and field desorption mass spectrometry at low and high mass resolution, with electrical and photographic detection, pyrolysis products of biomass were analyzed for the first time. The results of flash pyrolysis by Curie-point heating and thermally programmed degradation of biopolymers are compared.The main topic is the evaluation of the methodology for time- and temperature-resolved pyrolysis. The thermograms and pyrolysis mass spectra obtained enable the study of pyrolysis reactions and the chemical fingerprinting of complex biological matter. The kinetics for the devolatilization of individual chemical species or classes of compounds can be monitored. Curie-point pyrolysis of biopolymers such as kappa-carrageenan and time-programmed degradation of cellulose and lignin are reported. Furthermore, preliminary investigations of pine wood and coal illustrate the potential of the introduced methods.     

Liquid chromatography electrospray tandem mass spectrometric and desorption electrospray ionization tandem mass spectrometric analysis of chemical warfare agents in office media typically collected during a forensic investigation

Most prior analytical studies have dealt with the determination of chemical warfare agents in environmental or biological matrices that would typically be collected following battlefield use or in support of the Chemical Weapons Convention. These methods may be useful for some investigations, but may not be practical for indoor forensic investigations where chemical warfare agent use is suspected. There is a need for analytical methods for chemical warfare agent identification in office media, including flooring, wall surfaces, office fabrics and paper products, which would typically be collected in an office environment during forensic investigations. During this study, typical office environment media were spiked at the 4-20microg/g level with either a complex munitions grade sample of tabun (GA) or with a standard containing the three nerve agents, sarin (GB), cyclohexyl methylphosphonofluoridate (GF), soman (GD) and the nerve agent simulant, triethyl phosphate (TEP), to evaluate the potentials of liquid chromatography electrospray ionization mass spectrometry (LC-ESI-MS) and liquid chromatography electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) for forensic purposes. An emerging technique, desorption electrospray ionization (DESI-MS/MS), was also investigated for the direct determination of TEP, GB and GD sampled onto solid phase microextraction (SPME) fibers exposed to spiked office media. The spiked chemical warfare agents were recovered with varying efficiencies during this study, but in all cases sufficient chemical warfare agent was recovered for mass spectrometric identification purposes. Full high resolution mass spectra were acquired for all the chemical warfare agents in the continuum mode, which typically resulted in mass measurement errors of 0.001Da or less.     

Utilisation of separation methods in the analysis of chemical warfare agents

Chemical warfare agents and their degradation products represent a broad group of compounds with different chemical properties (polarity, volatility, thermostability, etc.). These chemicals often have to be detected and determined in complex matrices and therefore highly efficient separation techniques hyphenated to selective and sensitive detectors play an indispensable role. This review offers an overview of selected papers devoted to the title subject. It cannot be considered as a comprehensive literature compilation but should allow the reader to obtain an insight into the application of separation techniques in the important area of human protection and control of chemical weapons.