Structure and stability of Al13H(n) (n=1-13) clusters: exceptional stability of Al13H13

We have performed density functional calculations for the structure and stability of Al(13)H(n) (n=1-13) clusters. Population analysis has shown significant charge transfer occurring from the Al cluster to the H atoms. The population for Al(13) varies from 0.24 (Al(13)H) to 2.83 (Al(13)H(13)). The shape of Al(13) moieties in the Al(13)H(n) (n>/=8) clusters is significantly distorted from the icosahedral structure of Al(13) and is a "cagelike" form. Al(13)H(13) has a capped icosahedron as the ground-state structure, similar to B(13)H(13), while the shape of B(13) (planar) is different from Al(13) (icosahedral). The Al(13)H(13) cluster is predicted to be exceptionally stable on the basis of the high stabilization energy and the negative nucleus independent chemical shift value.     

PASADENA hyperpolarized 13C phospholactate

We demonstrate that potassium 1-(13)C-phosphoenolpyruvate becomes hyperpolarized potassium 1-(13)C-phospholactate with (13)C T(1) = 36 s after molecular hydrogenation by PASADENA (Parahydrogen and Synthesis Allows Dramatically Enhanced Nuclear Alignment). This proof-of-principle study was conducted with a fully protonated molecular precursor. (13)C was polarized to a level of 1%, corresponding to nearly 4000-fold sensitivity enhancement at 3 T. The relevant homo- and heteronuclear spin-spin couplings are reported.     

Carbon-13 nuclear magnetic resonance studies on high spin iron(III) porphyrins

Carbon-13 NMR studies on a series of high spin iron(III) porphyrins, namely tetraphenylporphyrin iron(III) halides [Fe(TPP) X, X=Cl, Br, I] in CDCl₃ solution are reported. As expected the¹³C shifts are found to be an order of magnitude larger than the corresponding proton shifts. The dipolar contribution, which is quite important for the proton NMR, becomes much less significant for the¹³C shifts. No systematic variation in the¹³C shift across the series is observed, except for the meso-carbon which shows a small but gradual decrease in going from the chloro to the iodo complex. The¹³C shift for the various carbon atoms of the porphyrin ligand shows interesting pattern which is discussed in terms of spin delocalisation mechanisms.     

Gd13Fe10C13: indications of Fe-Fe multiple bonding emerging from chemical frustration

We report the synthesis and crystal structure of the carbide Gd(13)Fe(10)C(13). This compound adopts a new structure type that is remarkable for its "H"-shaped C(2)FeFeC(2) units, which have some of the shortest Fe-Fe contacts known. A bonding analysis using DFT-calibrated Hückel calculations hints that Fe-Fe multiple bonding underlies these short distances. Gd(13)Fe(10)C(13) undergoes ferromagnetic ordering at ～55 K.     

Synthesis of diastereomeric 13-amido-substituted huprines as potential high affinity acetylcholinesterase inhibitors

Two diastereomeric huprines additionally functionalized at position 13 with a methanesulfonamido group have been synthesized in seven steps from the known 9,9-ethylenedioxybicyclo[3.3.1]nonane-3,7-dione (5). In a key-step, nickel boride non-stereoselective reduction of an oxime gave a mixture of amines which was separated as methanesulfonamido derivatives. The substitution pattern of these huprines could lead to an extended binding near the active site of acetylcholinesterase (AChE), and consequently to improved AChE inhibitors.     

Preparation and characterization of polyaluminum chloride containing high content of Al13 and active chlorine

This paper introduces a new electrochemical method for preparation of polyaluminum chloride (PACl) which contains high content of Al₁₃ and active chlorine and presents integrated properties of flocculation with oxidation. E-PACl (PACl prepared by electrolysis process) samples were successfully prepared in an electrochemical reactor, which used Ti/RuO₂–TiO₂ anodes and Ti cathodes. Anode potential was the key electrochemical parameter that needed to be controlled at 1.5 V to ensure the maximal current efficiency of main reactions in electrolysis process. Analyses by ferron colorimetric method and ²⁷Al NMR spectroscopy indicated that Al₁₃ was the predominant species in the final product when total Al concentration (Al_T) was in the range of 0.1–1.5 mol/L. The amount of active chlorine was in inverse proportion to Al_T. Contents of the most active component, Al₁₃ and active chlorine could respectively reach 90.9% and 5650 mg/L with Al_T = 0.51 mol/L and basicity (B, OH/Al molar ratios) = 2.23 in the liquid product of PACl (E-PACl2). In E-PACl2, the sulfate precipitate of Al₁₃ was the unique material detected by X-ray diffraction patterns and clusters of small spheres that might be the aggregates of Al₁₃ were observed on the surface of its air-dried sample by atomic force microscopy. Results of dynamic light scattering showed that the particle size distributions of E-PACl were related with the Al species distributions and ageing time. The active chlorine in E-PACl2 performed well on disinfection of raw water.     

高效液相色谱-串联质谱法同时测定水中13种有机污染物

以地表水环境质量标准严格控制的特定项目为依据,建立了直接进样-高效液相色谱-串联质谱同时测定水中13种化学性质差异较大的有机污染物的分析方法,这13种有机污染物为乐果、敌敌畏、敌百虫、对硫磷、甲基对硫磷、马拉硫磷、内吸磷、丙烯酰胺、苯胺、联苯胺、甲萘威、微囊藻毒素-LR、阿特拉津。水样经0.22 μm尼龙66滤膜过滤后,采用Kromasil 100-5 C18柱(150 mm×2.1 mm, 5 μm)分离,以甲醇-0.01%甲酸水溶液为流动相进行梯度洗脱,流速0.5 mL/min,柱温40 ℃,电喷雾正离子模式(ESI⁺)电离,多反应监测模式(MRM)进行检测,外标法定量。13种化合物的浓度与其峰面积在一定浓度范围内均呈现良好的线性关系(r≥0.9995),方法检出限为0.02~0.1 μg/L。测定低、中、高浓度的加标样品,13种化合物的相对标准偏差为0.5%~5.0%(n=6),实际样品加标平均回收率为81.2%~112%。此方法灵敏度高、干扰小、分析速度快,可适用于地表水、地下水中这13种有机污染物的同时分析。     

High-resolution solid-state (13)C NMR studies of chemisorbed organometallics. Chemisorptive formation of cation-like and alkylidene organotantalum complexes on high surface area inorganic oxides

(13)C CPMAS NMR spectroscopy has been employed to investigate the surface chemistry of the organotantalum hydrocarbyl/alkylidene complexes, Cp'Ta((13)CH(3))(4) (1*), Cp(2)Ta((13)CH(3))(3) (2*), Cp(2)Ta((13)CH(2))((13)CH(3)) (3*), and Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(3) (4*) [Cp' = eta(5)-(CH(3))(5)C(5), Cp = eta(5)-C(5)H(5)] supported on partially dehydroxylated silica (PDS), dehydroxylated silica (DS), or dehydroxylated gamma-alumina (DA). Mono-Cp tantalum hydrocarbyl 1* undergoes chemisorption to form Cp'Ta((13)CH(3))(3)O-Si mu-oxo species on silica, and "cation-like" Cp'Ta((13)CH(3))(3)(+) and Cp'Ta((13)CH(3))(3)O-Al mu-oxo species on DA, via pathways analogous to those established for organo-group 4 and actinide complexes. When supported on DA, bis-Cp tantalum hydrocarbyl 2* follows the same chemisorption mode as 1*. However, when 2* is chemisorbed on PDS and DS, a "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species is the major adsorbate product. On PDS, bis-Cp tantalum alkylidene complex 3* is converted predominantly to a stable "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species, presumably via electrophilic addition of a proton from the PDS surface. In contrast to 3*, Ta alkylidene complex 4* forms predominantly a Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(2)O-Si, mu-oxo-alkylidene species on PDS.     

Proton and carbon-13 high resolution NMR spectroscopy of high polymers

Using a super-conducting magnet, the examination of high polymers by ¹H- and ¹³C-NMR provides complementary and precise information about their microstructures. The configuration of the polymer skeleton and chemical structures which are present in low concentrations are easily observed. Relationships between polymerization mechanisms, microstructure and properties thus become clearer.     

Concise syntheses of 13-methylprotoberberine and 13-methyltetrahydroprotoberberine alkaloids

The concise syntheses of eight 13-methylprotoberberine (13-MePB) and eight enantioenriched 13-methyltetrahydroprotoberberine (13-MeTHPB) alkaloids have been achieved in a tactically modular fashion. This synthetic work features a one-pot metal-free Pictet-Spengler/Friedel-Crafts hydroxyalkylation/dehydration/oxidation sequence and a following highly enantioselective Ir-catalyzed hydrogenation. Given such brevity and modularity, our developed synthetic route would be greatly beneficial to the efficient syntheses of existing natural products and new fully synthetic variants of 13-MePB and 13-MeTHPB family.     

13C/15N distance determination by CPMAS NMR in uniformly 13C labeled molecules

The REDOR and CPMAS techniques are applied for measuring 13C-15N dipolar coupling constants in glycine. It is shown that the selective CP or SPECIFIC CP technique removes the coherent evolution of the spin system under homonuclear 13C-13C J couplings. While the large coupling constant (approximately 900 Hz) is readily determined because of the presence of large oscillations in the CPMAS dynamics, their absence precludes the measurement of the small coupling constant (approximately 200 Hz). The experimental results and numerical simulations demonstrate that the determination of 13C-15N coupling constants of medium size (<1 kHz) by the CPMAS technique is mainly limited by the strength of the 1H decoupling field and the size of the 13C and 15N chemical shift anisotropies.     

The synthesis of13N-labelled nitrite of high specific activity and purity

An improvement in a method for the synthesis of¹³NO ₂ ⁻ from¹³NO ₃ ⁻ with specific activity>30 mCi/mL and radiochemical purity>99% is described.¹³NO ₃ ⁻ is produced by the¹⁶O(p, α)¹³N reaction using a recirculating water target and 20 MeV protons.¹³NO ₂ ⁻ is synthesized by reduction of¹³NO ₃ ⁻ in a cadmium-copper column. Contaminating¹³NH ₄ ⁺ is removed by rotatory evaporation at pH>11.0. The synthetic procedure takes less than 20 minutes from collection of irradiated target water to sterilization of the radiopharmaceutical.     

1H Indirect detected 13C Low-Abundance Single-transition correlation Spectroscopy (HICLASS)-13C homonuclear correlation at natural abundance

A novel proton-detected (13)C homonuclear correlation experiment is reported at natural abundance, viz., (1)H Indirect detected (13)C Low-Abundance Single-transition correlation Spectroscopy (HICLASS). HICLASS is based on the evolution of (13)C single-quantum single transitions, followed by their mixing, and (1)H detection subsequent to heteronuclear transfer. Reduced relaxation losses during the evolution time and partial selectivity in the (1)H multiplet structure result in enhanced sensitivity of HICLASS. The superior performance of HICLASS is demonstrated for (1)H-detected (13)C correlation work.     

Fused s-triazino heterocycles. XV. 13H-4,6,7,13a,13c-pentaazabenzo[hi]chrysene, 13H-4,7,13a,13c-tetraazabenzo[hi]chrysene,and 7H-3,7,10,10b-tetraazacyclohepta[de]naphthalene,three new ring systems

The reaction of N-cyano-N′-(6-amino-2-pyridyl)acetamidine ( 5a ) and homophthalic anhydride followed by ring closure of the 2-[2-(carboxymethyl)phenyl]-5-methyl-1,3,4,6,9b-pentaazaphenalene intermediate ( 4a ) gave 5-methyl-13-oxo-13H-4,6,7,13a,13c-pentaazabenzo[hi]chrysene ( 8a ). An analogous series starting with 3-N-(6-amino-2-pyridyl)amino-2-cyano-2-butenenitrile ( 5b ) in place of 5a gave in two steps 5-methyl-13-oxo-13-H-4,7,13a,13c-tetraazabenzo[hi]chrysene-6-carbonitrile ( 8b ). Elemental analysis, ir and pmr spectra of 8a , 8b and several new model compounds aided in confirming the structures of 8a and 8b. The synthesis of one of these model compounds for 5b and phenylacetic anhydride led surprisingly to 2-methyl-9-phenyl-7H-3,7,-10,10b-tetraazacyclohepta[de]naphthalene ( 10 ) in addition to the expected 2-benzyl-4-cyano-5-methyl-1,3,-6,9b-tetraazaphenalene ( 7b ).     

Measurements of side-chain 13C-13C residual dipolar couplings in uniformly deuterated proteins

13C-only spectroscopy was used to measure multiple residual (13)C-(13)C dipolar couplings (RDCs) in uniformly deuterated and (13)C-labeled proteins. We demonstrate that (13)C-start and (13)C-observe spectra can be routinely used to measure an extensive set of the side-chain residual (13)C-(13)C dipolar couplings upon partial alignment of human ubiquitin in the presence of bacteriophages Pf1. We establish that, among different broadband polarization transfer schemes, the FLOPSY family can be used to exchange magnetization between a J coupled network of spins while largely decoupling dipolar interactions between these spins. An excellent correlation between measured RDCs and the 3D structure of the protein was observed, indicating a potential use of the (13)C-(13)C RDCs in the structure determination of perdeuterated proteins.     

13C-13C rotational resonance width distance measurements in uniformly 13C-labeled peptides

The rotational resonance width (R2W) experiment is a constant-time version of the rotational resonance (R2) experiment, in which the magnetization exchange is measured as a function of sample spinning frequency rather than the mixing time. The significant advantage of this experiment over conventional R2 is that both the dipolar coupling and the relaxation parameters can be independently and unambiguously extracted from the magnetization exchange profile. In this paper, we combine R2W with two-dimensional 13C-13C chemical shift correlation spectroscopy and demonstrate the utility of this technique for the site-specific measurement of multiple 13C-13C distances in uniformly labeled solids. The dipolar truncation effects, usually associated with distance measurements in uniformly labeled solids, are considerably attenuated in R2W experiments. Thus, R2W experiments are applicable to uniformly labeled biological systems. To validate this statement, multiple 13C-13C distances (in the range of 3-6 A) were determined in N-acetyl-[U-13C,15N]l-Val-l-Leu with an average precision of +/-0.5 A. Furthermore, the distance constraints extracted using a two-spin model agree well with the X-ray crystallographic data.     

Structural characterization of polybenzyls by high field 13C-NMR spectroscopy

¹³C-NMR Spectroscopy has been used for the structural characterization of polybenzyls synthesized from the polymerization of benzyl chloride catalyzed by arene chromium tricarbonyls. The ¹³C-chemical shifts for various mono-, di-, tri-, and tetrasubstituted phenyl groups in a polybenzyl have been calculated by the use of additivity parameters and compared with their observed shifts. Although from a theroetical point of view, polysubstitution on a phenyl ring gives rise to a number of isomers, the results indicate the preferential formation of only a few of them due to steric and electronic considerations. Based on quantitative ¹³C-NMR data, several important structural parameters including the percentage of mono-, di-, tri-, and tetrasubstituted phenyl rings in the polybenzyl can be calculated. The extent of branching in a number of polybenzyls prepared under different experimental conditions was determined. The results indicate an increase in branching with the increase in reaction temperature.     

A hydrogen peroxide-responsive hyperpolarized 13C MRI contrast agent

We report a new reaction-based approach for the detection of hydrogen peroxide (H(2)O(2)) using hyperpolarized (13)C magnetic resonance imaging ((13)C MRI) and the H(2)O(2)-mediated oxidation of α-ketoacids to carboxylic acids. (13)C-Benzoylformic acid reacts selectively with H(2)O(2) over other reactive oxygen species to generate (13)C-benzoic acid and can be hyperpolarized using dynamic nuclear polarization, providing a method for dual-frequency detection of H(2)O(2). Phantom images collected using frequency-specific imaging sequences demonstrate the efficacy of this responsive contrast agent to monitor H(2)O(2) at pre-clinical field strengths. The combination of reaction-based detection chemistry and hyperpolarized (13)C MRI provides a potentially powerful new methodology for non-invasive multi-analyte imaging in living systems.     

Chain packing in glassy polymers by natural-abundance 13C-13C spin diffusion using 2D centerband-only detection of exchange

The proximities of specific subgroups of nearest-neighbor chains in glassy polymers are revealed by distance-dependent (13)C-(13)C dipolar couplings and spin diffusion. The measurement of such proximities is practical even with natural-abundance levels of (13)C using a 2D version of centerband-only detection of exchange (CODEX). Two-dimensional CODEX is a relaxation-compensated experiment that avoids the problems associated with variations in T(1)(C)'s due to dynamic site heterogeneity in the glass. Isotropic chemical shifts are encoded in the t(1) preparation times before and after mixing, and variations in T(2)'s are compensated by an S(0) reference (no mixing). Data acquisition involves acquisition of an S(0) reference signal on alternate scans, and the active control of power amplifiers, to achieve stability and accuracy over long accumulation times. The model system to calibrate spin diffusion is the polymer itself. For a mixing time of 200 ms, only (13)C-(13)C pairs separated by one or two bonds (2.5 ?) show cross peaks, which therefore identify reference intrachain proximities. For a mixing time of 1200 ms, 5 ? interchain proximities appear. The resulting cross peaks are used in a simple and direct way to compare nonrandom chain packing for two commercial polycarbonates with decidedly different mechanical properties.