Substituent effect in anionic polymerization of β-lactones initiated by alkali metal alkoxides

The influence of methyl substituent on the mechanism of the ring-opening polymerization of β-lactones initiated by alkali metal alkoxides is discussed. Attention has been paid to the effect of the substituent position in the monomer molecule on the ring-opening mechanism, the 3,3-dimethyl-2-oxetanone (pivalolactone), 4-methyl-2-oxetanone (β-butyrolactone) and 2-oxetanone (β-propiolactone) being chosen as model monomers. Moreover, it was found unexpectedly that in the case of pivalolactone polymerization, besides open-chain polymers, cyclic oligomers are produced.     

Anionic polymerization of β-lactones initiated with potassium hydride. A convenient route to polyester macromonomers

The anionic polymerization of 2-oxetanone and 4-methyl-2-oxetanone initiated with the potassium hydride/18-crown-6 complex was investigated. The α-proton abstraction of the monomer was found to proceed at the initiation step of this polymerization. The salt of the unsaturated carboxylic acid formed initiates further propagation, leading to functionalized polyesters with unsaturated, dead end-groups.     

Block copolymerization of 3,3-dimethyl-2-oxetanone. II. Synthesis of polydimethylsiloxane-containing copolymers

Carboxy-terminated polydimethylsiloxanes (PDMSs) have been prepared by anchoring the functional end group on the main chain via a hydrolytically stable Si? C bond. The neutralized carboxy-terminated PDMSs are effective initiators of the 3,3-dimethyl-2-oxetanone (or pivalolactone) block copolymerization. The yield of block copolymers depends on the initiation efficiency of the carboxylate end groups, but this limit can be overcome by the use of more than one carboxylate group per end chain, and “palm-tree” structures are obtained. The ability to crystallize of poly(3,3-dimethyl-2-oxetanone) is significantly depressed when this polyester is engaged in PDMS-rich block copolymers, but the observed heterophase morphologies (350 Å) are uniformly fine.     

Synthesis and intramolecular ring cleavage of 2-oxetanones

Intermolecular 2 + 2 aldehyde-ketene cycloaddition, followed by Lewis acid induced intramolecular ring opening of the 2-oxetanone product have been used to prepare tetrahydrofuran and tetrahydropyran ring systems.     

Theoretical IR and Raman spectra of diketene and its 3-methylene isomer

The IR and Raman spectra of diketene, 4-methylene-2-oxetanone, and its less stable isomer, 3-methylene-2-oxetanone, were calculated at the MP2, DFT B3PW91 and RHF levels using 6-311++G** basis set. The internal coordinates were defined for both isomers and used in potential energy distribution (PED) analysis. The PED analysis of the theoretical spectra forms the basis for a detection of the 3-methylene isomer traces in a reaction mixture as well as for elucidation of the future matrix isolation IR and/or Raman spectra.     

Comparison of the reactivity of β-thiolactones and β-lactones toward ring-opening by thiols and amines

An investigation into the comparative reactivity of simple β-lactones and β-thiolactones toward a thiol and a primary amine is reported. A simple 3-mercaptomethyl-2-oxetanone is found to undergo rearrangement in the presence of aqueous base to give the corresponding thietane-3-carboxylic acid rather than the 3-hydroxymethyl-2-thietanone. Implications for the use of β-thiolactones in bioorganic and medicinal chemistry are discussed.     

Stereoselective synthesis of cis- or trans-2,4-disubstituted butyrolactones from Wynberg lactone

(R)-Wynberg lactone was used to prepare various asymmetric 2,4-disubstituted butyrolactones in three to four steps. Attainment of any possible stereoisomer, based upon commencement from (R)- or (S)-4-trichloromethyl-2-oxetanone, and the capacity to install disparate substituents at C₂ make this approach particularly versatile.     

NMR studies on epoxidations of allenamides. Evidence for formation of nitrogen-substituted allene oxide and spiro-epoxide via trapping experiments

Two epoxidations of chiral allenamides are described here. While treatment with m-CPBA led to highly stereoselective formation of an alpha-keto aminal that can be useful synthetically, DMDO oxidation led to conclusive evidence for both nitrogen-substituted allene oxide (via mono-epoxidation) and spiro-epoxide (via bis-epoxidation) using intramolecular nucleophilic trapping experiments. NMR studies provide reliable evidence for a 3-oxetanone that can be derived from the spiro-epoxide and also suggest the presence of an allene oxide. Despite a facile second epoxidation as evidenced by the predominant formation of the 3-oxetanone, in the presence of furan, [4 + 3] cycloaddition of the nitrogen-substituted allene oxide or oxyallyl cation with furan occurs faster than the second epoxidation efficiently leading to cycloadducts. This rate difference plays an invaluable role for the success of a stereoselective sequential epoxidation-[4 + 3] cycloaddition reaction via DMDO epoxidations of chiral allenamides.     

A beta-lactone route to chiral gamma-substituted alpha-amino acids: application to the concise synthesis of (S)-alpha-azidobutyro lactone and a natural amino acid

[reaction: see text] Beta-lactones are useful synthetic intermediates allowing access to a number of functional arrays. In this report, enantiomerically pure 4-trichloromethyl-2-oxetanone is shown to be a versatile amino acid synthon leading to a variety of gamma-substituted alpha-amino acid precursors. The utility of this methodology was demonstrated by the concise synthesis of a protected homoserine equivalent, alpha-azidobutyro lactone, and a naturally occurring alpha-amino acid from the seeds of Blighia unijugata.     

Semiempirical calculations of internal barriers to rotation and ring puckering: II. Amindo/3 study

The MINDO/3 technique is examined for its applicability to rotational barriers and ring puckering of strained-ring compounds. Comparisons are made with MINDO/2' and INDO on the compounds ethane, acetone, isobutylene, 3-oxetanone, cyclobutane, cyclobutanone, methylenecyclobutane, and 1,1-difluorocyclobutane. The MINDO/3 method improperly predicts all ring compounds to energetically favor the planar conformation as does its predecessor. Some improvement in bond lengths and bond angles is observed by MINDO/3 but the rotational barriers are still underestimated.     

The electronics structures of small strained rings. An investigation of the interaction between the oxygen and the π orbitals in 3-methyleneoxetane and 3-oxetanone

The ultraviolet photoelectron spectra of 3-methyleneoxetane (I), 3-oxetanone (II) and β-propiol-octane (III) have been investigated for the purpose of studying the interaction processes between the endocyclic oxygen and the methylene or carbonyl groups of I and II, respectively. Molecular orbital calculations at the MINDO/3, MNDO, and STO-3G/431-G levels have been performed to aid analyses of the data. The interaction process occurs primarily through the pseudo-π-CH₂ orbitals for I and II. Substantial stabilizing inductive effects are noted for the lone-pair and π orbitals for these molecules.     

β-丙醇酸内酯气相热分解反应的过渡态——从头计算法研究

本文用量子化学从头计算法研究了β-丙醇酸内酯热分解反应的机理。对均相热分解的两种可能方式进行了自洽场分子轨道法研究(3-21G基组):C_2H_4+CO_2(1)←CH_2—C—O—CH_2→(2)CH_2=C=O+H_2CO反应物、产物和过渡态的几何构型分别用能量梯度法进行了优化, 并对能量做了二级微扰能(MP2)的校正。用这种方法得出反应(1)的活化势垒为166.0 kJ mol~(-1), 反应(2)的话化势垒为302.0 kJ mol~(-1)。计算结果表明: 在一般温度下, 热分解反应主要以反应(1)的机理进行。这个结论与动力学的实验结果是一致的。     

Photochemical Decarbonylation of Oxetanone and Azetidinone: Spectroscopy,Computational Models,and Synthetic Applications**

Photoexcitation of cyclic ketones leads to the expulsion of carbon monoxide and a mixture of products derived from diradical intermediates. Here we show that synthetic utility of this process is improved if strained heterocyclic ketones are used. Photochemistry of 3-oxetanone and N-Boc-3-azetidinone has not been previously described. Decarbonylation of these 4-membered rings proceeds through a step-wise Norrish type I cleavage of the C−C bond from the singlet excited state. Ylides derived from both compounds are high-energy species that are kinetically stable long enough to undergo [3+2] cycloaddition with a variety of alkenes and produce substituted tetrahydrofurans and pyrrolidines. The reaction has a sufficiently wide scope to produce scaffolds that were either previously inaccessible or difficult to synthesize, thereby providing experimental access to new chemical space.     

Photochemical Decarbonylation of Oxetanone and Azetidinone: Spectroscopy,Computational Models,and Synthetic Applications**

Photoexcitation of cyclic ketones leads to the expulsion of carbon monoxide and a mixture of products derived from diradical intermediates. Here we show that synthetic utility of this process is improved if strained heterocyclic ketones are used. Photochemistry of 3-oxetanone and N-Boc-3-azetidinone has not been previously described. Decarbonylation of these 4-membered rings proceeds through a step-wise Norrish type I cleavage of the C−C bond from the singlet excited state. Ylides derived from both compounds are high-energy species that are kinetically stable long enough to undergo [3+2] cycloaddition with a variety of alkenes and produce substituted tetrahydrofurans and pyrrolidines. The reaction has a sufficiently wide scope to produce scaffolds that were either previously inaccessible or difficult to synthesize, thereby providing experimental access to new chemical space.     

Synthesis of stereoregular poly[(2S,3S)-benzyl β-3-methylmalate]

The asymmetric lactone (3 S, 4 R)-3-methyl-4-benzyloxycarbonyl-2-oxetanone ( 6 ) was anionically polymerized to give an insoluble, crystalline, highly isotactic polymer with (2 S, 3 S)-benzyl β-3-methylmalate repeating units. Solubility was achieved by copolymerization of 6 with the recemic (R, S)-butyl malolactonate ( 7 ). The semicrystalline copolymer was characterized (M̄_n = 107 000, T_g = 29,6°C, T_m = 161°C, [α] = 1,5 deg · dm⁻¹ · g⁻¹ · cm³) and its stereosequence investigated by ¹³C NMR.     

Anionic polymerization of 4-methyl-2-oxetanone (β-butyrolactone)

Polymerization of 4-methyl-2-oxetanone ( 1 ) initiated with potassium acetate-dibenzo-18-crown-6 complex ( 2 ) in THF as solvent, was studied. Transfer reactions, leading to both crotonate anions and carboxylic acid formation, have been observed. Two kinetic effects of these reactions, hampering the living polymerization, have been established. The first results from reinitiation with the crotonate anions and thereby lowers the polymer molecular weight. The second is the decrease in the overall polymerization rate due to complexation of the growing carboxylate anions with carboxylic acid moieties. Kinetic scheme of polymerization involves propagation accompanied by transfer followed by slow reinitiation. This scheme, including complexation of the active species has been solved numerically. The apparent rate and equilibrium constants (k_p, k_tr, k_ri, and K_ass and respectively) have been determined. Although these kinetic parameters depend strongly on the polymerization conditions, but the ratio of the rate constants k_p : k_t : k_ri is fairly constant and equal to 10⁻⁴ : 10⁻⁶ : 10⁻⁶, respectively (at 20°C). Conditions of the controlled anionic synthesis of the amorphous poly(4-methyl-2-oxetanone) with $\bar M_n$ as high as 1.7 × 10⁴ and ${{ \le \bar M_n } \mathord{\left/ {\vphantom {{ \le \bar M_n } {\bar M_n }}} \right. \kern-\nulldelimiterspace} {\bar M_n }} \le 1.20$ have also been elaborated.     

Molecular Zeeman effect of 3-oxetanone and 3-methylene oxetane,and the comparison of the magnetic-susceptibility anisotropies,molecular quadrupole moments,and other magnetic parameters with other four-membered rings

The molecular Zeeman effect is reported for 3-oxetanone and 3-methylene oxetane at fields near 20000 G. The results for 3-oxetanone are molecular g-values: g_aa = ?0.1059 ± 0.0008, g_bb = ?0.0581 ± 0.0004,g_cc = ?0.0437 ± 0.0004, magnetic susceptibility anisotropies:2x_aa -x_bb - x_cc = (9.6±0.5) x 10^?6 erg/G²mole, 2x_bb - x_aa - x_cc = ?(7.8±0.6) x 10^?6 erg/G²mole, and molecular quadrupole moments: Q_aa = ?(12.8±0.8) x 10^?26 esu cm,Q_bb = (7.9±0.8) x 10^?26 esu cm, and Q_cc = (4.9±0.8) x 10^?26 esu cm. For 3-methylene oxetane, the results are g_aa = ?0.0510 ± 0.0018, g_bb = ?0.0435 ± 0.0010, g_cc = ?0.0313 ± 0.0010, 2x_aa - x_bb - x_cc = ?(10.9±0.5) x 10^?6 erg/G² mole, 2x_bb - x_aa - x_cc = (2.3±0.9) x 10^?6 erg/G² mole, Q_aa = -?5.4±1.0) x 10^?26 esu cm, Q_bb = (5.1 ± 1.2) x 10^?26 esu cm, and Q_cc = (0.2±1.5) x 10^?26 esu cm. The bulk magnetic susceptibility for 3-oxetanone was measured to be x = 1/2 (x_aa+x_bb+x_cc) = ?(30.6±1.5) x 10^?6 erg/G² mole. The out-of-plane minus average in-plane magnetic-susceptibility anisotropies in four-membered rings show larger paramagnetism than predicted on the basis of localized group susceptibility anisotropies. This effect is discussed and a possible explanation presented.     

Reaction pathways of carboxylic acids over TiO<Subscript>2</Subscript> single crystal surfaces: diketene formation from bromo-acetic acid

This work presents the first investigation of a halo-carboxylic acid (Br-CH2COOH) over the surface of an oxide single crystal (the {011}-faceted TiO₂(001) single crystal). A very rich chemistry is observed. This is broadly divided into three categories: elimination of HBr to make ketene, dimerisation of two molecules of ketene to 4-methyl-2-oxetanone and 1,3-cyclobutanedione, and further reaction of the latter to a mass spectrometer m/e 70 signal attributed to crotonaldehyde (formed by ring opening). Temperature programmed desorption (TPD) and Scanning Kinetic Spectroscopy (SKS) gave complementary results with SKS opening a simple way for investigating surface chemical reactions in UHV conditions with high surface coverage at still high temperatures. A successful modeling of SKS data was conducted providing the activation energies (E _a) for ketene desorption, with a reaction order n close to 1, for both CH₃COOH (E _a = 21.3 kcal/mol) and BrCH₂COOH (E _a = 17.2 kcal/mol). In order to further understand the surface reaction of BrCH₂COOH semi-empirical PM3 computation of its adsorption and reaction on a Ti₈O₂₉H₂₆ cluster representing the (011) TiO₂ surface was conducted and compared to that of CH₃COOH on the same cluster. Dissociative adsorptions of both the O-H and C-Br bonds are more stable than the non-dissociative adsorption modes. The di-coordinated species, TiOC(O)CH₂O_s, formed by the simultaneous dissociation of both C-Br and O-H bonds of BrCH₂COOH appears the most plausible surface intermediate for the observed carbon coupling reactions.     

Synthesis of N-Hetarylthiourea Derivatives of Carbohydrates

ABSTRACT

The syntheses of N-hetaryl (thiazole-2-yl, 2-thiazoline-2-yl, 4,4-diphenyloxazoline-2-yl, cis-3a,4,5,6,7,7a-hexahydrobenzoxazole-2-yl)-N′-(2,3,4,6-tetra-O-acetyl-β-D-glucopyranosyl) thioureas (1a-1d), N-hetaryl (2-thiazoline-2-yl, 4,4-diphenyloxazoline-2-yl)-N′-(2,3,4,6-tetra-O-benzoyl-β-D-galactopyranosyl) thioureas (2b, 2c) and 1,2,3,4,6-tetra-O-acetyl-2-deoxy-2-[3-(4′, 4′-diphenyl-2′-y1) thioureido]-β-D-glucopyranose (3c) are described. The structures and conformational properties of prepared compounds are based on analytical and spectroscopic (UV, IR, NMR and MS) data.     

Dynamics of a cis-dihydrogen/hydride complex of iridium

Insertion of CS2 into one of the Ir-H bonds of [Ir(H)5(PCy3)2] takes place to afford the dihydrido dithioformate complex cis-[Ir(H)2(eta2-S2CH)(PCy3)2] accompanied by the elimination of H2. Protonation of the dithioformate complex using HBF4.Et2O gives cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] wherein the H atom undergoes site exchange between the dihydrogen and the hydride ligands. The dynamics was found to be so extremely rapid with respect to the NMR time scale that the barrier to exchange could not be measured. Partial deuteration of the hydride ligands resulted in a J(H,D) of 6.5 and 7.7 Hz for the H2D and the HD2 isotopomers of cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4], respectively. The H-H distance (d(HH)) for this complex has been calculated to be 1.05 A, which can be categorized under the class of elongated dihydrogen complexes. The cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] complex undergoes substitution of the bound H2 moiety with CH(3)CN and CO resulting in new hydride derivatives, cis-[Ir(H)(L)(eta2-S2CH)(PCy3)2][BF4] (L = CH3CN, CO). Reaction of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] with electrophilic reagents such as MeOTf and Me3SiOTf afforded a new hydride aquo complex cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] via the elimination of CH4 and Me3SiH, respectively, followed by the binding of a water molecule (present in trace quantities in the solvent) to the iridium center. The X-ray crystal structures of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] and cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] have been determined.