A quantitative structure property relationship study of electrophoretic mobility of analytes in capillary zone electrophoresis

A quantitative structure property relationship (QSPR) is proposed to calculate the electrophoretic mobility of analytes in capillary zone electrophoresis. The proposed model employs logarithm of the electrophoretic mobility (ln micro) as dependent variable and partial charge (PQ), surface area (V(2/3)), total energy (TE), heat of formation (DeltaH(f)) and molecular refractivity (MR) as independent variables whose calculated using AM1 (Austin model 1) semi-empirical quantum mechanics method by HyperChem 7.0 software. The general form of the model is: ln micro =K(0)+K(1)PQ+K(2)V(2/3)+K(3)TE+K(4)DeltaH(f)+K(5)MR, where K(0)-K(5) are the model constants computed using a least-square method. The applicability of the model on real mobility data has been studied employing five experimental data sets of beta-blockers, benzoate derivatives, non-steroidal anti-inflammatory drugs, sulfonamides and amines in different buffers. The accuracy of the model is assessed using absolute average relative deviation (AARD) and the overall AARD value. The obtained AARD for the sets studied are 1.0 (N=10), 2.1 (N=26), 0.8 (N=11), 0.6 (N=13) and 2.7% (N=18), respectively, and the overall AARD is 1.4%. The model is cross-validated using one leave out technique and the obtained overall AARD is 1.8%. To further investigate on the applicability of the proposed model, the prediction capability of the model is evaluated by employing a minimum number of six experimental data points as training set, and predicting the mobility of other data points using trained models. The obtained overall AARD (for 48 predicted data points) is 5.6%.     

Investigation of unexpected migration behavior of adenosine in capillary zone electrophoresis

Summary The capillary zone electrophoresis of two common nucleosides, adenosine and inosine, was investigated. Both compounds were resolved in a 0.1 M sodium phosphate buffer, pH 7.5. Contrary to expectations, adenosine behaved at this pH— 5 pH units lower than the literature pK_a— as a negative ion, migrating behind mesityloxide (neutral marker) when working in normal polarity mode. To confirm the migration order, peaks were identified from absorption maxima, by high-speed scanning detector. The change in electrophoretic mobility with pH was investigated for the nucleosides, and 10 other background electrolytes were tried to match the separation capabilities of the sodium phosphate buffer. Most inorganic buffers showed comparable separation, while organic, Good-type buffers lacked selectivity.     

High sensitivity laser induced fluorescence detection in capillary zone electrophoresis

Laser induced fluorescence is used for the detection of labeled amino acids. A preliminary comparison is made of three fluorescence pre-column labeling reagents, ortho-phthaldialdehyde, naphthalene dicarboxaldehyde, and fluorescein isothiocyanate, and data on phenylalanine detection limits are given.     

Separation of twenty underivatized essential amino acids by capillary zone electrophoresis with contactless conductivity detection

Twenty underivatized essential amino acids were separated using capillary zone electrophoresis and consequently detected with contactless conductivity detection (CCD). A simple acidic background electrolyte (BGE) containing 2.3 M acetic acid and 0.1% w/w hydroxyethylcellulose (HEC) allowed the electrophoretic separation and sensitive detection of all 20 essential amino acids in their underivatized cationic form. The addition of HEC to the BGE suppressed both, electroosmotic flow and analyte adsorption on the capillary surface resulting in an excellent migration time reproducibility and a very good analyte peak symmetry. Additionally, the HEC addition significantly reduced the noise and long-term fluctuations of the CCD baseline. The optimized electrophoretic separation method together with the CCD was proved to be a powerful technique for determination of amino acid profiles in various natural samples, like beer, yeast, urine, saliva, and herb extracts.     

One-pot labeling-based capillary zone electrophoresis for separation of amino acid mixture and assay of biofluids

A fast, simple and cost-effective one-pot labeling strategy coupled with capillary zone electrophoresis was developed for the complete separation of amino acid mixture. The strategy includes two steps of reactions: Cyanuric chloride was made to react first with 7-amino-1,3-naphthalenedisulfonic acid monopotassium salt at 0 °C for 10 min, and then with amino acids at 55 °C for 6 min. The resulted products, after diluted with water, were injected into capillary zone electrophoresis system for separation. Using a running buffer of 20 mM sodium tetraborate decahydrate at pH 10.1, nineteen amino acids were efficiently separated in 25 min, with relative standard deviation of 0.36–1.6% and 0.96–2.1% (within and between days, respectively) for migration time and 0.030–1.6% and 0.22–2.4% (within and between days, respectively) for peak area. The proposed method has been successfully applied to the determination of free amino acids in biofluids, including human serum, urine, and saliva. The linearity of quantification was over two orders of magnitude for most amino acids, with a correlation coefficient larger than 0.999. The average recovery, determined by spiking a known amount of amino acid standards into real samples, was in a range from 91.6% to 105.9%. This method can be a noninvasive means since it could directly assay the urine and saliva samples.     

Mobilization of electroosmotic flow markers in capillary zone electrophoresis

UV-absorbing neutral substances are commonly used as markers of mean electroosmotic flow in capillary electrophoresis for their zero electrophoretic mobility in an electric field. However, some of these markers can interact with background electrolyte components and migrate at a different velocity than the electroosmotic flow. Thus, we tested 11 markers primarily varying in their degree of methylation and type of central atom in combination with five background electrolyte cations differing in their ionic radii and surface charge density, measuring the relative electrophoretic mobility using thiourea as a reference marker. Our results from this set of experiments showed some general trends in the mobilization of the markers based on the effects of marker structure and type of background electrolyte cation on the relative electrophoretic mobility. As an example, the effects of an inadequate choice of marker on analyte identification were illustrated in the electrophoretic separation of glucosinolates. Therefore, our findings may help electrophoretists appropriately select electroosmotic flow markers for various electrophoretic systems.     

毛细管区带电泳法测定粉针剂中头孢拉定的含量

用毛细管区带电泳法测定头孢拉定的含量 ,未涂层毛细管柱 (75 μm×48.5cm ,有效长度 40cm) ,电压 2 8kV ,检测波长 2 3 0nm ,温度 2 0℃ ,进样 5×1 0 3Pa× 3s。运行缓冲液为 2 5mmol/L硼砂缓冲液。方法的线性范围 3 1 .2 2μg/mL～ 749.2 8μg/mL ,检测限为 1 .1 7μg/mL。     

An automatic sampling device for capillary zone electrophoresis

An automatic sampling device has been developed for capillary zone electrophoresis. The sample is introduced to the column electrokinetically by rapidly exchanging buffer for sample in a narrow channel drilled in a plexiglass block. The autosampler is capable, under computer control, of performing multiple sample injections from a large volume sample source (such as a reaction vessel) as the sample concentration changes, and thus presents the possibility of analyzing time-varying processes by CZE. Peak area reproducibility in electropherograms obtained after use of the sampler is less than 1% and efficiency is more than 2.2 × 10⁵ theoretical plates.     

毛细管区带电泳用于酶微反应器酶解条件的研究

将氨基酰化酶通过戊二醛固定在毛细管内壁,制备毛细管酶微反应器,用毛细管区带电泳对毛细管酶微反应器的酶解产物进行分离,以生成物的峰面积优化底物N-乙酰-DL-蛋氨酸的酶解条件。实验结果表明,在温度37℃的条件下,10μg/mL N-乙酰-DL-蛋氨酸磷酸盐缓冲溶液(pH7.5)以4μL/min的速度通过15 cm长的毛细管酶微反应器,具有良好的酶解效果。利用毛细管酶微反应器对底物N-乙酰-DL-蛋氨酸进行酶解,每天酶解5次,10天后酶活仅下降了8.66%,说明制备的毛细管酶微反应器具有良好的稳定性。     

Indirect thermo-optical detection for capillary electrophoresis

Indirect thermo-optical detection for capillary electrophoresis is described first. A 20 mW helium-neon laser (632.8 nm) was used to provide the pumping beam and a 2 mW helium-neon laser (632.8 nm) supplied as the probe beam; Methylene Blue dye was used as a background absorber. The addition of ethanol to the background electrolyte solution can be performed to reduce adsorption of Methylene Blue onto the capillary wall. The detection method was applied to the detection of amino acids separated by capillary electrophoresis. The detection limit for lysine was 5 × 10⁻⁶ mol l⁻¹ (signal-to-noise ratio, 2).     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

Separation of amino acids in plant tissue extracts by capillary zone electrophoresis with indirect UV detection using aromatic carboxylates as background electrolytes

Summary Amino acids in extracts of plant tissue were separated and detected by capillary zone electrophoresis (CZE) with indirect UV detection. Various aromatic carboxylates such as salicylate, benzoate, phthalate and trimellitate were investigated as background electrolytes (BGEs). A BGE of benzoate gave the best resolution and detector response. Amino acids were separated at a highly alkaline pH to charge amino acids negatively. Separation was achieved by the co-electroosmotic flow (Co-EOF) by the addition of the cationic surfactant myristyltrimethyl-ammonium bromide (MTAB) to the electrolyte. The condtions affecting the separation of amino acids, including electrolyte pH, concentrations of both benzoate and MTAB, were investigated and optimised. Separation of a mixture of 17 amino acids at pH 11.20 with indirect UV detection at 225 nm was achieved with a BGE of 10 mM benzoate containing 1.0 mM MTAB at pH of 11.20. Detection limits ranged between 10 and 50 μM. The proposed method was demonstrated by the determination of amino acids in extracts of Eucalypt leaves with direct injection of samples.     

Rapid capillary zone electrophoresis method for the determination of metal cations in beverages

A rapid and reliable capillary zone electrophoresis method for the determination of inorganic cations was developed. The complete separation of K⁺, Ba²⁺, Ca²⁺, Na⁺, Mg²⁺, Mn²⁺, Ni²⁺, Cd²⁺, Li⁺ and Cu²⁺ can be achieved in 4 min with a simple electrolyte composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). Injection was performed hydrostatically by elevating the sample at 10 cm for 30 s. The running voltage was +25 kV at room temperature. Indirect UV-absorption detection was achieved at 185 nm. The detection limit was in the range between 0.06 mg/l (Mg²⁺) and 0.57 mg/l (K⁺) and the quantification limits ranged from 0.10 mg/l (Ni²⁺) to 0.80 mg/l (Cu²⁺). The calibration graphs were linear in the concentration range from the quantification limit till at least 1 g/l in K⁺, 10 mg/l in Ba²⁺, Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Cd²⁺, 40 mg/l in Na⁺ and 12 mg/l in Li⁺ and Cu²⁺. The repeatability, intraday and interday analysis were ≤1.55% and ≤3.64% for migration time and ≤3.38% and ≤3.63% for peak area. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is simple, fast, cheap and it is achieved with common products in either laboratory. For these reasons, it is a very useful method for routine analysis.     

Formamide as solvent for capillary zone electrophoresis

A comprehensive investigation of a number of aspects when using formamide as background electrolyte solvent in capillary zone electrophoresis was presented. It included (i) the change of the ion mobility with ionic strength, (ii) the influence of the ionic strength on diffusion coefficients, and (iii) on the separation efficiency expressed by the maximum reachable plate numbers (when only longitudinal diffusion contributed to zone broadening), (iv) the effect of the solvent on pKa values (taken from the literature) of neutral and cation acids, (v) the establishment of the a pH scale in formamide by dissolving acids with known pKa values and their salts at defined proportion (thus circumventing the problem of calibrating the pH meter), (vi) the agreement between the experimentally derived and the theoretical dependence of the effective mobility on pH, (vii) the uptake of water of this hygroscopic solvent from the humidity of the environment and its consequence to the ion mobilities, pKa values, and the chemical stability of the solvent (e.g., hydrolysis), and finally (viii) the use of conductivity and indirect UV absorption to enable detection of analytes below the optical cutoff of formamide.     

On the electrophoretic mobilities of partially charged oligosaccharides as a function of charge patterning and degree of polymerization

Fully or partially charged oligosaccharide molecules play a key role in many areas of biology, where their fine structures are crucial in determining their functionality. However, the separation of specific charged oligosaccharides from similar moieties that typically coexist in extracted samples, even for those that are unbranched, and in cases where each saccharide moiety can only carry a single charge or not, is far from trivial. Typically such molecules are characterized by a degree of polymerization n and a number m (and distribution) of charged residues, and must be separated from a plethora of similar species possessing different combinations of n and m. Furthermore, the separation of the possible isomers of each species of fixed n and m is a formidable challenge to analytical chemists. Herein, we report the results of molecular dynamics simulations that have been performed in order to calculate the free solution electrophoretic mobilities of galacturonides and charged oligosaccharides derived from digests of the important plant cell‐wall polysaccharide pectin. The simulations are compared with an experiment and are found to correctly predict the loss of resolution of fully charged species above a critical degree of polymerization n and the ionic strength dependence of the electrophoretic mobilities of different partially charged oligosaccharides. It is expected that having a predictive tool for the calculation of the electrophoretic mobilities of differently charged oligosaccharide species in hand will allow experimental conditions that optimize the resolution of particular species to be ascertained and understood.     

Separation of flavonoids and phenolic acids from propolis by capillary zone electrophoresis

The simultaneous determination of twelve different flavonoids, pinocembrin, acacetin, chrysin, rutin, catechin, naringenin, galangin, luteolin, kaempferol, apigenin, myricetin, and quercetin, two phenolic acids, cinnamic acid and caffeic acid, and one stilbene derivative, resveratrol, in propolis extracts used in medicine has been investigated by capillary zone electrophoresis (CZE). With a buffer constituted by sodium tetraborate 30 mM, pH 9.0, and 15 kV applied voltage, the 15 polyphenols were separated on an uncoated fused-silica capillary within 40 min using normal polarity. Under the experimental conditions used, a linear relationship was calculated between the CZE migration times and the molecular weight of polyphenols' expression of the increasing amount of their hydroxyl groups and polarity. Regression equations revealed a linear relationship (correlation coefficients > 0.97) between the peak area of each polyphenol species and their concentration, from 6 to 120 ng. The levels of analytes in three different propolis extracts, ethanolic, aqueous-ethanolic and aqueous-glycolic, used to prepare various commercial medicinal products, were determined. The aqueous-ethanolic propolis extract showed a great percentage of caffeic acid, galangin, quercetin, and chrysin, whilst the ethanolic preparation was composed of a great amount of resveratrol, chrysin, and caffeic acid. On the contrary, the aqueous-glycolic propolis preparation was composed of approx. 11% of caffeic acid and a low amount of the other identified flavonoids due to the presence of approx. 85% of nonidentified compounds. CZE represents a valuable method for the qualitative and quantitative assay of the most relevant polyphenol components of propolis, representing an alternative to obtain typical fingerprints of propolis and a reliable identification of a large number of propolis polyphenolic species.     

Separation of organic and inorganic arsenic species by capillary zone electrophoresis

Summary Capillary zone electrophoresis has been used to separate arsenite, arsenate, dimethylarsinic acid, and phenyl-,p-aminophenyl-, ando-aminophenylarsinic acids. Identification and quantification of the arsenic species at mg L⁻¹ levels was possible by use of direct UV detection at 200 nm. The relative standard deviation (n=7) ranged from 0.97 to 1.52% for migration times and from 2.08 to 4.31% for peak areas. A method for rapid separation of inorganic arsenic species was also developed; by use of this method arsenite and arsenate could be separated within 2 min. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999