钛,锆和铪羰基化合物M(CO)_n(M=Ti,Zr,Hf;n=4～7)的理论研究

利用密度泛函方法对标题化合物的平衡几何、热化学及振动频率进行了理论预测,发现这3种金属原子都有相似的M(CO)n(n=4～7)结构.全局最低构型对M(CO)7都是单态C3v戴帽八面体7S-1,对M(CO)6都是三重态D3d畸变八面体6T(而对应的单重态M(CO)5仅比它低不到21 kJ·mol-1).对M(CO)n(n=5,4)都是三重态6S-1,其构型分别为从6T中移去1个或2个CO基的衍生物5T和4T.此外,五重态的D3h的三角双锥M(CO)5和单态的Td四面体M(CO)4以及能量更高的含有C和O同时与金属成键的独特配位CO基的M(CO)6和M(CO)3也被发现.最后,给出M(CO)7→M(CO)6+CO反应的离解能.并讨论了金属18价电子的Ti(CO)7存在的可能性.     

四层过渡金属夹心化合物的电子构型

本文利用共点稠合型硼烷的拓扑结构规则和EHMO量子化学计算方法, 讨论了四层过渡金属夹心化合物的电子构型, 以及它与几何结构之间的关系. 用于解释实际化合物的电子构型. 继而, 对四层、三层和双层夹心化合物的电子构型与几何结构之间的关系进行了比较和讨论.     

碳硼烷和碳硼炔金属配合物中金属-碳键的化学性质

碳硼烷和碳硼炔金属配合物中的金属-碳键具有不同于经典金属-碳键的化学性质.一方面,二十面体碳硼烷独特的电子和空间效应使得碳硼烷金属配合物中的金属-碳键不参与和不饱和分子的反应 另一方面,在一定条件下具有大空间位阻的碳硼笼可以诱导某些碳-碳偶联反应.然而,碳硼炔金属配合物中的金属-碳键能与多种不饱和分子发生反应,其反应模式取决于中心金属离子的电子构型.本文简要总结了我们近期在这方面的研究进展.     

氟代十二顶点碳硼烷结构和非线性光学性质的理论研究

采用密度泛函理论(DFT)方法,计算并分析了四氟取代十二顶点碳硼烷及其衍生物的结构和非线性光学(NLO)性质.结果表明,改变四氟碳硼烷取代基的共轭性或给吸电子能力,会使分子中碳硼笼原子间距离发生改变.碳硼烷取代基的给吸电子能力越强,其偶极矩越大.分子极化率随取代基共轭性和体积的增加而增大.引入强吸电子基或增加四氟碳硼烷取代基的共轭性,可使其二阶NLO响应明显增强.通过分析分子的电子光谱和对应的分子轨道组成可知,第一超极化率最大的分子4a’发生碳硼笼到并苯取代基的电荷转移.     

一系列新型硼氮化合物的理论研究

借助密度泛函理论,在B3LYP/6-311 G**和BP86/6-311 G**水平上,对一系列包含BNN单元的硼氮化合物BNN,H3BNN,NNBH2-BH2NN,(BNN)2H2,NN-BBNN,(BNN)3 ,(BNN)42 ,(BNN)5-,(BNN)6,(BNN)7 和(BNN)82 进行了理论计算研究.结果表明:在这些硼氮化合物中,尤其是BNN,B原子和N2配体之间存在着σ-π反馈作用.这种作用增强了B-N键,而活化了N-N键.结果还显示,(BNN)3 ,(BNN)42 ,(BNN)5-,(BNN)6,(BNN)7 和(BNN)82 都是具有平面单环结构并且满足4n 2规则的芳香性体系.     

14顶点双取代碳硼烷和金属硼烷极化率和二阶超极化率的DFT研究

采用量子化学密度泛函理论(DFT) B3LYP/6-31G(d)方法对14顶点双取代碳硼烷和金属硼烷几何构型进行优化, 结合有限场(FF)方法计算了各体系的极化率和二阶超极化率. 同时金属硼烷中金属原子采用赝势基组进行计算, 讨论基组对计算结果的影响. 结果表明, 14顶点碳硼烷和金属硼烷中碳和金属元素的成键方式不同, 金属硼烷中各原子间距离比碳硼烷中大, 平面偏移角增大. 金属原子的引入有效增加分子的NLO系数, 同时金属硼烷的前线分子轨道能级差比碳硼烷小很多, 金属硼烷材料有可能表现出半导体甚至导体特性, 金属原子采用不同基组对计算结果影响不大.     

聚硼硅氮烷的合成及其流变性能研究

以二氯甲基硅烷、三氯化硼、六甲基二硅氮烷为起始原料,采用缩聚法合成了一种新型SiBNC陶瓷先驱体-聚硼硅氮烷(PBSZ)。通过调节原料二氯甲基硅烷的用量可获得不同软化点的先驱体。通过改进的毛细管流变仪,首次对熔融纺丝状态时聚硼硅氮烷(PBSZ)的流变特性展开了研究。结果表明：PBSZ熔融纺丝时,剪切速率在10～110s-1时,为切力变稀流体。非牛顿指数为0.83～0.90,粘流活化能约为142KJ/mol,表观粘度440～2460Pa·s,PBSZ对温度变化的敏感性较聚碳硅烷小,可纺温区较宽。PBSZ纺丝性能良好,纤维连续无断头长度﹥1600m,纤维直径﹤20μm。     

二芳基氨(硼)-π-碳硼烷三元化合物的二阶非线性光学性质的理论研究

采用密度泛函理论(DFT)方法对二芳基氨(硼)-π-十二顶点碳硼烷三元化合物的结构及二阶非线性光学(NLO)性质进行计算.结果表明,化合物共轭桥长度及二芳基氨(硼)对化合物偶极矩的影响较小.随着分子共轭桥的增长,分子的电子空间范围R2增大,从而使极化率和第一超极化率增大.通过分析化合物的电子光谱和对应的分子轨道组成可知,分子中电荷转移主要发生在二芳基氨(硼)和π-桥之间,碳硼烷的贡献较少.二芳基氨和二芳基硼的供电子能力差异可以调节分子的二阶NLO响应.     

聚硼硅氮烷前驱体的合成及性能研究

以三氯化硼和甲基氢二氯硅烷为原料,采用共氨解的方式合成了聚硼硅氮烷前驱体,并采用核磁共振波谱仪、傅里叶红外光谱仪、差式扫描量热仪、热重分析仪、光电子能谱、网络矢量分析仪等仪器对前驱体及其热解产物进行了表征。前驱体在1000 oC、氮气气氛下热解的陶瓷产率为71.1 %。在氨气气氛下热解可以有效降低热解产物中的碳含量,聚硼硅氮烷在900 oC氨气气氛下热解产物的碳含量低于1 %,并且该热解产物具有高的结晶温度、良好的抗氧化性能和介电性能,有望用于耐高温陶瓷基透波复合材料。     

Theoretical Study on the Dissociation of Ligands in the Rhodium and Iridium Complexes Containing 1,1,1,5,5,5-Hexafluoroacetylacetonato

Functionalization of the inert C? H bonds of unsaturated molecules by transition metal complex is an important means to form new C? C bonds. The functionalization is usually initiated by the ligand dissociation of a complex. In this paper we employ both ab initio and density functional methods to explore the influence of central metals, conformation, solvent and protonation on the ligand dissociation of the (hfac‐O,O)₂M(L)(py) complexes [M=Rh(III) or Ir(III), hfac‐O,O=k²‐O,O‐1,1,1,5,5,5‐hexafluoroacetylacetonato, L=CH₃, CH₃CO₂, (CH₃CO)₂CH, CH₃O or OH, py=pyridine]. We demonstrate that ligand pyridine dissociates more easily than the "L" ligands under study in aprotic solvent and gas phase and the dissociation of pyridine is more facile in the trans‐conformation than in the cis‐isomer. These phenomena are rationalized based on electronic structure and molecular orbital interactions. We show that solvation only slightly stabilizes the complexes and does not change the ligand dissociation ordering. In particular, we show that pyridine is no longer the labile ligand in protic media. Instead, the oxygen‐containing ligands (apart from those like hfac that form a cyclic structure with the central metal) that coordinate to the central metal via oxygen atom become the labile ones. Finally our calculations indicate that hfac is a stable ligand, even in protic media.     

吡咯-HCN体系在气相及溶液中相互作用的理论研究

用量子化学B3LYP方法在6-311G(d, p)水平上优化了吡咯-HCN氢键复合物，通过振动频率分析确定了两个吡咯-HCN体系稳定构型.为了得到更加精确的氢键作用能，采用相关一致基组aug-cc-pVDZ以及Boys 和Bernardi的CP(counterpoise)校正方法消除基组重叠误差后得到C－H…π和N－H…N型复合物的氢键相互作用能.为了确定B3LYP方法计算的相互作用能的可靠性，在MP2/aug-cc-pVDZ水平计算了复合物的氢键相互作用能，结果分别为－25.10和－19.30 kJ·mol－1.采用自然键轨道(NBO)分析考察了吡咯与HCN分子间轨道相互作用.以自洽场理论(SCRF)中的Onsager模型研究了不同极性溶剂对吡咯-氰化氢体系N－H…N型氢键几何构型，频率位移，电荷分布以及相对能量的影响.研究发现，当溶液的介电常数在1.5～30.0范围时，溶液作用十分显著，而当介电常数超过30.0以后，溶液作用已经达到了极限.     

密度泛函理论研究镥二聚体低电子能态的相对稳定性、结构以及成键性质

用密度泛函理论方法研究了镥二聚体（Lu2）低能量电子态的性质,计算了电子态相对能量、平衡键长、振动频率以及基态解离能,考察了密度泛函性质、相对论有效势种类以及Hartree—Fock交换作用大小对计算结果的影响．结果表明,无论采用何种密度泛函和相对论有效势,体系的基态都为三重态,与其他一些基于分子轨道理论的从头计算方法得到的结论是一致的．另外,与分子轨道从头计算结果以及实验结果比较发现,采用杂化密度泛函理论和Stuttgart小核有效势计算得到的结果总体吻合最好．最后,特别分析研究了B3LYP计算中Hartree—Fock交换作用大小对基态键长和基态解离能的影响,发现随着交换作用的增大,键长增长,解离能减小,这是由于5d轨道杂化导致的共价成键作用减弱造成的．     

Cyclometalated Iridium(III) and Rhodium(III) Complexes Containing Naphthyridine Ligands: Synthesis,Characterization and Biological Studies

The synthesis, crystal structure, and biological activity of new bis‐cyclometalated compounds [M(ptpy)₂(4‐chloro‐2‐methyl‐1,8‐naphthyridine)]PF₆ [M = Rh ( 1 ); M = Ir ( 2 ); ptpy = 2‐(p‐tolyl)pyridinato] and [M(ptpy)₂(2‐methyl‐1,8‐naphthyridine)]PF₆ [M = Rh ( 3 ); M = Ir ( 4 )] are described. The new compounds were prepared by the reaction of [{M(μ‐Cl)(ptpy)₂}₂] (M = Rh, Ir) with the corresponding naphthyridine ligands. The molecular structures of compounds 1 , 3 , and 4 were confirmed by single‐crystal X‐ray diffraction studies.     

Study of the Bonding Modes of Di‐2‐pyridyl ketoxime Ligand towards Ruthenium,Rhodium and Iridium Half Sandwich Complexes

The bonding modes of the ligand di‐2‐pyridyl ketoxime towards half‐sandwich arene ruthenium, Cp*Rh and Cp*Ir complexes were investigated. Di‐2‐pyridyl ketoxime {pyC(py)NOH} react with metal precursor [Cp*IrCl₂]₂ to give cationic oxime complexes of the general formula [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1a ) and [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1b ), for which two coordination isomers were observed by NMR spectroscopy. The molecular structures of the complexes revealed that in the major isomer the oxime nitrogen and one of the pyridine nitrogen atoms are coordinated to the central iridium atom forming a five membered metallocycle, whereas in the minor isomer both the pyridine nitrogen atoms are coordinated to the iridium atom forming a six membered metallacyclic ring. Di‐2‐pyridyl ketoxime react with [(arene)MCl₂]₂ to form complexes bearing formula [(p‐cymene)Ru{pyC(py)NOH}Cl]PF₆ ( 2 ); [(benzene)Ru{pyC(py)NOH}Cl]PF₆ ( 3 ), and [Cp*Rh{pyC(py)NOH}Cl]PF₆ ( 4 ). In case of complex 3 the ligand coordinates to the metal by using oxime nitrogen and one of the pyridine nitrogen atoms, whereas in complex 4 both the pyridine nitrogen atoms are coordinated to the metal ion. The complexes were fully characterized by spectroscopic techniques.     

Bimetallic Carbonyl Complexes Based on Iridium and Rhodium: Useful Tools for Hydrodefluorination Reactions

A set of bimetallic complexes based on iridium and rhodium with bis(diphenylphosphino)methane, bis(di-iso-propylphosphino)methane, diphenyl-2-pyridylphosphine and 2-(di-iso-propylphosphino)imidazole bridging ligands was prepared. The complexes were characterized by NMR and IR spectroscopy and studied quantum-chemically using DFT methods. The bimetallic systems succeeded in catalytic hydrodefluorination reactions of lower fluorinated aryl fluorides using molecular hydrogen and sodium tert-butoxide as a base. Effects of (i) ligand variation, (ii) mono- vs bimetallic nuclearity, and (iii) Ir vs Rh metal identity were studied and rationalized en route to achieve an effective hydrodefluorination.     

Synthetic,Mechanistic, and Theoretical Studies on the Generation of Iridium Hydride Alkylidene and Iridium Hydride Alkene Isomers

Experimental and theoretical studies on equilibria between iridium hydride alkylidene structures, [(Tp^Me2)Ir(H){?C(CH₂R)ArO }] (Tp^Me2=hydrotris(3,5‐dimethylpyrazolyl)borate; R=H, Me; Ar=substituted C₆H₄ group), and their corresponding hydride olefin isomers, [(Tp^Me2)Ir(H){R(H)C? C(H)OAr}], have been carried out. Compounds of these types are obtained either by reaction of the unsaturated fragment [(Tp^Me2)Ir(C₆H₅)₂] with o‐C₆H₄(OH)CH₂R, or with the substituted anisoles 2,6‐Me₂C₆H₃OMe, 2,4,6‐Me₃C₆H₂OMe, and 4‐Br‐2,6‐Me₂C₆H₂OMe. The reactions with the substituted anisoles require not only multiple C? H bond activation but also cleavage of the Me? OAr bond and the reversible formation of a C? C bond (as revealed by ¹³C labeling studies). Equilibria between the two tautomeric structures of these complexes were achieved by prolonged heating at temperatures between 100 and 140 °C, with interconversion of isomeric complexes requiring inversion of the metal configuration, as well as the expected migratory insertion and hydrogen‐elimination reactions. This proposal is supported by a detailed computational exploration of the mechanism at the quantum mechanics (QM) level in the real system. For all compounds investigated, the equilibria favor the alkylidene structure over the olefinic isomer by a factor of between approximately 1 and 25. Calculations demonstrate that the main reason for this preference is the strong Ir–carbene interactions in the carbene isomers, rather than steric destabilization of the olefinic tautomers.     

Stepwise Construction of Polynuclear Complexes of Rhodium and Iridium Assisted by Benzimidazole-2-thiol. NMR and X-ray Diffraction Studies

Reactions of [M(2)(&mgr;-Cl)(2)(cod)(2)] (cod = 1,5-cyclooctadiene, M = Rh, Ir) with benzimidazole-2-thiol (H(2)Bzimt) afford the mononuclear complexes [MCl(H(2)Bzimt)(cod)] (M = Rh (1), Ir (2)) for which a S-coordination of the ligand is proposed based on their spectroscopic data. The dinuclear complexes [M(2)(&mgr;-HBzimt)(2)(cod)(2)] (M = Rh (3), Ir (4)) are isolated from the reaction of [M(acac)(cod)] and benzimidazole-2-thiol. They contain the monodeprotonated ligand (HBzimt(-)) bridging the two metals in a &mgr;(2)-(1kappaN,2kappaS) coordination mode and in a relative cis,cis-HT arrangement. Complexes 3 and 4 react with the appropriate species [M(cod)(Me(2)CO)(2)](+) to afford the trinuclear cationic aggregates [M(3)(&mgr;-HBzimt)(2)(cod)(3)](+) (M = Rh (5), Ir (6)) and with the [M'(2)(&mgr;-OMe)(2)(cod)(2)] compounds to give the homo- and heterotetranuclear complexes [MM'(&mgr;-Bzimt)(cod)(2)](2) (M = M' = Rh (7), Ir (8); M = Ir, M' = Rh (9)) containing the dideprotonated ligand (Bzimt(2)(-)). The trinuclear neutral complexes [M(3)(&mgr;-Bzimt)(&mgr;-HBzimt)(cod)(3)] are intermediates detected in the synthesis of the tetranuclear complexes. Protonation of 9 with HBF(4) gives the unsymmetrical complex [Ir(2)Rh(&mgr;-HBzimt)(2)(cod)(3)]BF(4) (10). This reaction involves the protonation of the bridging ligands followed by the removal of one "Rh(cod)" moiety to give a single isomer. The molecular structure of [Rh(2)(&mgr;-Bzimt)(cod)(2)](2) (7) has been determined by X-ray diffraction methods. Crystals are monoclinic, space group P2(1)/n, a = 20.173(5) ?, b = 42.076(8) ?, c = 10.983(3) ?, beta = 93.32(2) degrees, Z = 8, 7145 reflections, R = 0.0622, and R(w) = 0.0779. The complete assignment of the resonances of the (1)H NMR spectra of the complexes 3, 4, and 7-9 was carried out by selective decoupling, NOE, and H,H-COSY experiments. The differences in the chemical shifts of the olefinic protons are discussed on the basis of steric and magnetic anisotropy effects.     

(NO)2+复合物阳离子的结构和性质研究

用B3LYP/6-311++G**方法对NO二聚体阳离子(NO)2+进行了研究.几何优化并结合振动分析表明,该复合物存在5种可能的稳定构型.能量最低的是N-N相连的反式异构体,具有C2h对称性.分析了各稳定构型的相对稳定性及成键特征.建立了态态相关并给出异构化过渡态,分析了各构型之间转化的途径.