席夫碱修饰的介孔分子筛MCM-41催化有机反应的研究进展

介孔分子筛MCM-41在催化、吸附和分离等方面具有优异的性能,而席夫碱在催化、生物活性和医药等方面也表现出很好的活性,席夫碱配合物修饰的介孔分子筛MCM-41催化有机反应的应用已成为有机化学研究的热点之一.针对近年来席夫碱修饰的介孔分子筛MCM-41在烯烃的氧化、醇的氧化、Suzuki偶联、不对称催化及其它反应中的应用研究进行了综述.     

具有强酸性位的高水热稳定介孔分子筛的合成

在强酸性介质中,以预先制备的β沸石纳米簇作为前驱体,通过S＋X－I＋路线及氨水热后处理步骤合成具有强酸性位的高水热稳定性介孔分子筛.XRD、氮气吸附、HRTEM和SEM分析表明所得样品具有普通MCM-41的典型介孔结构和表观形貌.较短的组装周期和室温的组装条件减弱了脱铝效应,27Al MAS NMR表明铝元素主要以四配位状态存在于介孔分子筛骨架中.采用NH3-TPD和水热老化方法分别考察了其固体酸性和水热稳定性,结果表明此介孔分子筛相对于普通MCM-41分子筛具有较强酸性位和较高的水热稳定性.沸石纳米簇的引入提高了分子筛骨架的聚合度和孔壁的厚度,是水热稳定性提高的主要原因.     

介孔分子筛研究新进展

介孔分子筛材料作为催化剂或催化剂载体为有机大分子参与反应提供了有利的空间构型和择形活性中心,在石油加工工业中具有潜在的应用优势。但由于介孔分子筛材料的水热稳定性比较低,且酸性较弱,极大地影响了其在催化领域中的广泛应用。本文综述了近年硅基介孔分子筛的改性研究进展,重点讨论了在提高介孔分子筛酸性和水热稳定性方面的研究工作。     

形貌可控的微孔-介孔硅磷铝酸盐在大分子催化裂化中具有较高的催化活性

目前,随着世界原油资源的日趋重质化,催化裂化工艺已经成为石油加工过程中重油的轻质化和渣油裂解的重要方法.但是如何提高催化裂化转化率和小分子烯烃的选择性是目前催化裂化工艺研究的重要课题,而催化裂化的关键是催化剂.重质油大分子催化裂化时存在的问题是由于传统的微孔分子筛只具有单一的1nm以下的微孔孔道,而重油大分子通常较大、分子链较长,很难进入到微孔孔道中充分反应,因此传统微孔分子筛对重油大分子的反应极为不利.以MCM-41为代表的介孔分子筛具有较大的孔道直径(1.5～10nm),在催化裂化炼油工业中具有潜在的应用前景,但其较弱的酸性和较差的水热稳定性无法满足裂化过程对催化剂酸性和水热稳定性的要求,因此限制了介孔分子筛在工业催化领域中的应用.微孔-介孔复合分子筛具有微孔和介孔双模型孔分布,结合了介孔分子筛的孔道优势与微孔分子筛强酸性和高水热稳定性的优势,可使两种材料优势互补、协同作用,在大分子催化与吸附方面具有潜在的应用前景,受到分子筛化学家的广泛关注.前人主要对硅铝基微孔-介孔复合分子筛进行了大量的研究,本文将传统的硅铝基微孔-介孔复合分子筛扩展到了硅磷铝基微孔-介孔复合分子筛.在酸性室温条件下,通过两步路线合成了一种新颖且形貌可控的微孔-介孔硅磷铝酸盐MUS-5,考察了不同pH值条件下MUS-5形貌的变化,并借助X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、N2吸附-脱附、NH3-TPD等技术对其物相、形貌、结构及酸性进行了表征.研究结果表明:当溶液体系的pH值在2.0到5.0之间变化时,可以得到三种不同形貌(包括链状、花状、桶状)的MUS-5,且MUS-5均是由微孔SAPO-5相和介孔MCM-41相组成的.同时,对MUS-5复合材料的水热稳定性进行了研究,经过100℃水热条件下处理48h后,发现MUS-5结构中的介孔相依然存在,表明该材料具有较好的水热稳定性.最后,采用1,3,5-三异丙基苯作为探针分子评价了MUS-5催化剂的裂化性能,并在相同反应条件下与微孔SAPO-5催化剂进行了比较.催化评价结果显示:MUS-5的裂化性能远远高于微孔SAPO-5分子筛.其原因主要是由于MUS-5具有微孔和介孔双模型孔分布,结合了介孔相MCM-41的孔道优势与微孔相SAPO-5强酸性的优势,致使其催化性能大大提高.说明这种具有微孔-介孔孔道结构的硅磷铝酸盐MUS-5在大分子裂化方面应用前景广阔.     

烯烃裂解中分子筛催化剂的稳定性研究进展

低碳烯烃催化裂解增产丙烯是一项新技术,高水热稳定催化剂的研究和开发是关键技术之一,硅酸铝分子筛催化剂因具有相对较好的稳定性而得到了广泛研究. 本文总结了HY, HZSM-5和 MCM-22等微孔、介孔以及具有微-介孔复合结构的新型分子筛在烯烃催化裂解反应中的稳定性,特别是水热稳定性方面的研究进展,归纳了提高酸性分子筛催化剂水热稳定性的方法,比较了不同方法制得分子筛的催化裂解性能,对高稳定性催化剂在实际应用中的问题和前景进行了探讨,为研发新一代低碳烯烃裂解催化剂提供参考.     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

Ni-Fe-B/MCM-41非晶态合金的合成与表征

用化学还原沉积法制备了Ni-Fe-B／MCM-41负载型非品态合金催化材料。通过XRD,FT-IR,TPR,SEM,TG及BET研究了非晶态合金对介孔分子筛载体结构的影响及非晶态合金负载后性质和形态的变化。结果表明：非晶态合金没有破坏介孔分子筛的结构,Ni-Fe-B／MCM-41的热稳定性和氧化能力与Ni-Fe-B相比,均有一定提高。     

Hβ/MCM-41复合分子筛催化剂上苯甲醚与乙酸酐酰化反应研究

以β沸石为硅源,制备了不同硅铝比的Hβ/MCM-41复合分子筛,考察了该复合分子筛对苯甲醚与乙酸酐酰化反应的催化效果,并与介孔MCM-41、微孔Hβ分子筛的催化效果进行了比较,研究了分子筛硅铝比、酸性及孔道结构对酰化反应催化性能的影响。结果表明,对于苯甲醚和乙酸酐酰化反应,Hβ/MCM-41复合分子筛具有较好的催化稳定性,反应过程中的积炭量较少,积炭的碳氢比较低。该复合分子筛不仅具有微孔沸石的强酸性,而且具有较大孔径的介孔,产物分子能及时从孔道中扩散出来,催化活性位不易中毒失活。     

氯苄基官能化和氯苄基甲基双官能化介孔分子筛MCM-41的合成与表征

首先比较了氯苄三乙氧基硅烷和氯苄基三氯硅烷硅烷化介孔分子筛MCM-1的差异性,进而采用氯苄基三氯硅烷和甲基三氯硅烷混合试剂硅烷化介孔分子筛,一步得到氯苄基甲基双官能化介孔分子筛MCM-41,并用固体核磁予以证实.发现甲基三氯硅烷一方面可以作为一种“稀释剂”调节氯苄基的负载量,另一方面甲基的引入可增强介孔分子筛的水热稳定性.     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

Strong Acidic and High Temperature Hydrothermally Stable Mesoporous Aluminosilicates with Well-ordered Hexagonal Structure

Mesoporous molecular sieves such as hexagonally ordered MCM-41 have been attracted many researchers' attention since they are potentially used as versatile catalysts and catalyst supports for conversion of large molecules. However, as compared with those of zeolites, the acidity and hydrothermal stability of these mesostructured materials are relatively low, which strongly influence their practical applications in industrial catalytic reactions of petroleum. Despite several successful examples of preparation on the stabilization of aluminosilicate mesostructures at low temperature (in boiling water,100℃) including syntheses of materials with thick pore walls by triblock copolymers, removal of silanol groups by silylation, addition of salts effects,and post-treatments, their acidity and hydrothermal stability at high temperature (800℃) are still lower than those of microporous aluminosilicate zeolites.     

由沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的新型介孔分子筛材料

 人们合成了一系列介孔分子筛材料，并发现它们在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有很大的潜在应用价值．但是，介孔分子筛材料相对于微孔沸石分子筛存在着两个致命弱点：较低的水热稳定性和较不活泼的催化活性中心．这两个弱点大大地影响了介孔分子筛在催化反应中的广泛应用．本文系统地综述了最近几年利用沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的介孔分子筛材料的研究进展．这包括利用硅铝沸石纳米粒子自组装制备具有强酸性和水热稳定的新型介孔硅铝分子筛材料，利用钛硅沸石纳米粒子自组装制备具有高催化氧化活性中心和水热稳定的新型钛硅介孔分子筛材料，以及利用含有不同杂原子的沸石纳米粒子自组装制备一系列水热稳定的新型介孔分子筛催化材料．     

Hydrothermally Stable and Catalytically Active Ordered Mesoporous Materials Assembled from Preformed Zeolite Nanoclusters

Microporous zeolites are widely used commercial catalysts, but their applications are intrinsically limited by their small channel diameters. Recent progress in solving this is used to ordered mesoporous materials such as MCM-41, HMS and SBA-15. These mesoporous materials have pore diameters of 30–60 Å and exhibit catalytic properties for the catalytic conversion of bulky reactants, but unfortunately, when compared with microporous zeolites, the catalytic activity and hydrothermal stability are relatively low, which severely hinders their practical applications. The relatively low catalytic activity and hydrothermal stability can be attributed to the amorphous nature of the mesoporous walls. We review here that the assembly of preformed zeolite precursors with surfactants can synthesize a series of ordered mesoporous materials, which include (1) strongly acidic and hydrothermally stable mesoporous aluminosilicates synthesized in alkaline media; (2) strongly acidic and hydrothermally stable mesoporous aluminosilicates synthesized in strongly acidic media; (3) hydrothermally stable mesoporous titanosilicates with catalytically active titanium species in oxidations; (4) hydrothermally stable mesoporous ferrisilicates. This work would open a door for the industrial application of mesoporous materials as catalysts for large molecules.     

Rapid synthesis of highly ordered Si-MCM-41

A very short-time synthesis of highly ordered MCM-41 molecular sieve was formulated by using cetyltrimethylammonium bromide (CTAB) as the template and silica gel from SiliCycle as the silica source. The physical properties of MCM-41 samples were characterized by X-ray diffraction (XRD), nitrogen physisorption, and transmission electron microscopy (TEM). The MCM-41 sample prepared in this study exhibited well defined long-range order and good hydrothermal stability. It was demonstrated that reducing the time of self-assembly step to 2 h during the synthesis had no unfavorable effect on the quality of MCM-41 materials.     

Effect of trivalent elements on the thermal and hydrothermal stability of MCM-41 mesoporous molecular materials

Effect of trivalent elements on the thermal and hydrothermal stability of MCM-41 mesoporous molecular sieve materials has been investigated. Al(III) decreases the thermal and hydrothermal stability of MCM-41 materials, whereas La(III) and Fe(III), especially Fe(III), can improve the thermal and hydrothermal stability. Benzene adsorption and IR spectra suggested that thick channel wall and the fewer structural defect sites in MCM-41 would enhance the thermal and hydrothermal stability of MCM-41.     

Synthesis, characterization, and catalytic properties of stable mesoporous molecular sieve MCM-41 prepared from zeolite mordenite

Mesoporous molecular sieves (denoted as M-MCM-41) with ordered hexagonal structure have been successfully synthesized from the assembly of precursors from preformed zeolite Mordenite with CTAB surfactant micelle in alkaline media. The samples were characterized by XRD, N₂ adsorption, IR and DTG. The materials exhibit highly hydrothermal stability, as compared with conventional MCM-41. Characterization results indicate that the mesoporous walls of M-MCM-41 contain the secondary building units similar to those in microporous crystal of zeolite Mordenite. In catalytic dealkylation of C10⁺ aromatic hydrocarbon, M-MCM-41 shows higher activities in comparison with Mordenite and MCM-41, which would be ascribed to the combination of advantages of both MCM-41 (large pores) and Mordenite (strong acidity). Furthermore, this synthesis strategy could be used as a new general method for the preparation of hydrothermally stable mesoporous aluminosilicate materials under alkaline conditions.     

Synthesis and surface modification of mesoporous mcm-41 silica materials

Surface modification offers a great opportunity to adjust both the pore diameter and surface properties of MCM-41 type organic–inorganic hybrid materials which result in materials of improved hydrothermal and mechanical stability. Therefore, MCM-41 silica, surface modified with organic ligands, are promising systems with engineered properties and attractive for advanced applications. In the present study, after optimization of the reaction conditions highly ordered MCM-41 silica spheres with uniform mesopores were prepared by the pseudomorphic transformation route. The effect of functionality and alkyl chain length of the alkyl ligands during surface modification was probed by using butyl and octylsilanes with two different functionalities. Due to steric hindrance, the longer chains are assumed to bind only on the outer silica surface and near the entrance of the pores, while the shorter chains are also able to bind to the interior mesopore walls. The resulting materials were comprehensively characterized before and after surface modification using nitrogen sorption techniques, XRD, SEM, solid-state NMR spectroscopy and FTIR spectroscopy. From chromatographic test measurements it was found that the separation power primarily depends on surface coverage and alkyl chain length. On the basis of the present data, surface modified mesoporous silica of MCM-41 type are very promising candidates for future chromatographic applications.     

丝光沸石前驱体组装MCM-41介孔分子筛

MCM-41分子筛是具有单一孔径的长程有序介孔材料,由于孔壁是无定形结构,与微孔沸石晶体相比,水热稳定性较差,这使其在石油炼制和精细化工中的应用受到很大的限制.根据实验发现,如果将一些沸石的前驱结构单元体--即在形成完整的沸石结构前所形成的初级或次级结构单元引入介孔材料,使其转化为介孔孔壁,将会增加介孔材料的短程有序化程度,提高水热稳定性.