Experimental and semiemprical studies of chemical reactivity of dialkylcadmium reagents addition to α,β-enones

Experimental and semiempirical calculations were carried out to study the reactivity of dialkylcadmium reagents addition to α,β-enones. It was demonstrated that α,β-enone such as benzoquinone with low lying LUMO energy reacts via single electron transfer (SET) mechanism with the formation of the 1,2 or 1,4-type alkyl addition product depending on the reaction temperature and substrate structure. Site and chemoselectivity in unsymmetrical benzoquinone derivatives are determined by the stability of the cadmium coordinated semienone complex intermediates and the carbon spin densities of these reactive species respectively. On the other hand, by increasing the LUMO energy of α,β-enone system, the reaction mechanism changes from SET to polar addition affording the 1,4-type alkyl addition product. The establishment of a correlation scale between substrate LUMO energies and reaction mechanism presented in this article will be discussed.     

Structural and spectroscopic characterization of an electrophilic iron nitrido complex

We have isolated and structurally characterized a terminal iron nitrido complex supported by a bulky tris(carbene)borate ligand. The electronic structure of this complex reveals that the a1 LUMO (formerly Fe(dz2)) is strongly stabilized by reduced antibonding interactions with the carbene sigma-donor ligands and configurational mixing (hybridization) with higher lying Fe 4s and 4p atomic orbitals. This unusual bonding interaction results in a low-lying Fe nitrido acceptor orbital (LUMO) that possesses electrophilic character. Reaction with PPh3 results in nitrogen atom transfer to the phosphine, supporting a reaction mechanism involving nucleophilic attack of the triphenylphosphine HOMO at the electrophilic LUMO of the iron nitrido complex.     

Theoretical Studies on the Electronic Structures and Spectral Properties of 4,4′-（Ethane-1,2-diylbis-（oxy））dibenzaldehyde and Its Polymorph

The ground state geometries, frontier molecular orbital properties, and absorption properties of 4,4′-(ethane-1,2-diylbis(oxy))dibenzaldehyde (EDO-DBDHD) and its polymorph have been studied theoretically. The density functional theory (DFT) method was employed to optimize the ground state geometries, and theoretical data reveal that EDO-DBDHD features the planar molecular conformations, in contrast to V-shaped structures of its polymorph, which agrees with the experimental data. Additionally, the absorption spectra of both compounds were predicted using time-dependent density functional theory (TDDFT). The calculated results show that the lowest lying absorption bands of these compounds have the transition configurations of HOMO → LUMO, resulting in the transition character of π→π*/n→π*. The transition of HOMO → LUMO+3 mainly contributes to the highest lying absorption bands of two compounds at 225 nm with the character of π→π*/n→π*.     

Comparative study of the semiconducting properties of benzothiadiazole and benzobis(thiadiazole) derivatives using computational techniques

Recent literature reports indicate that derivatives of benzothiadiazole (BT) and benzobis(thiadiazole) (BBT), which differs from BT by an extra thiadiazole ring, exhibit good semiconducting properties, such as high electron mobility and low-lying lowest unoccupied molecular-orbital (LUMO) levels. In this study herein, computational techniques like density functional theory (DFT), spin-flip DFT and valence-bond methods are used to analyze the semiconducting properties of these molecules. Calculations at the B3LYP/cc-pVTZ level reveal that all the BBT molecules, including the bare BBT ring, have lower lying LUMO energies (3.70-4.11 eV) compared to the BT derivatives (2.56-3.41 eV) with similar substitution. The reorganization energies (λ(+)/λ(-)) obtained at this level of theory of the BT derivatives are around (225-333)/(246-315) meV, while BBT derivatives have much smaller reorganization energies and these are in the range of (129-259)/(150-230) meV. We observe that the different behavior of BBT is due to the inherited biradicaloid character from the parent molecule tetramethylenebenzene (TMB), a disjoint non-Kekule biradical having non-bonding molecular orbitals (NBMOs) as the highest occupied molecular orbital (HOMO) and LUMO. Additionally, the perturbation of the orbitals of the biradical TMB to obtain BBT is the major cause for the BBT derivatives to have a larger electron affinity (EA) and a smaller HOMO-LUMO gap (HLG) compared to BT derivatives.     

Two-photon photoemission spectroscopy study of 1,3-butadiene on Cu(111): electronic structures and excitation mechanism

The characteristics of 1,3-butadiene (C(4)H(6)) adsorbed on Cu(111) were investigated with temperature-programmed desorption (TPD) and two-photon photoemission spectroscopy (2PPE). Dosed at 90 K, the work function drops by 0.4 eV and TPD provides no evidence for dissociation, but there are four coverage-dependent local maxima located at 195, 135, 121, and 115 K. From the 2PPE spectra, three unoccupied electronic states of the C(4)H(6)-Cu(111) system were identified: the LUMO (pi(1)*, 2a(u)), LUMO + 1 (pi(2)*, 2b(g)), and LUMO + 2 (sigma*, 7b(u)), lying 1.3, 3.4, and 4.8 eV above the Fermi level, respectively. Although the excitation mechanisms for the LUMO and LUMO + 1 are substrate mediated, the excitation of the LUMO + 2 is attributed to intramolecular excitation.     

Synthesis and Properties of a New Class of Fully Conjugated Azahexacene Analogues

Acenes are a traditional class of polycyclic aromatic hydrocarbons (PAHs) which attracted considerable interest during the last decade because of their outstanding p‐channel semiconductor properties. More recently, N‐heteroacenes have been prepared. These molecules have been shown to be more stable and can exhibit n‐channel semiconductor properties. Inspired by these archetype PAHs, we synthesized a novel class of highly persistent azahexacene analogues 3 a – d . These molecules are composed of a core of four fused five‐membered rings derived from their respective diketopyrrolopyrroles. These new π‐conjugated scaffolds show broad and intense absorption in the visible region and possess low‐lying HOMO and LUMO levels, leading to much better stability compared to that of acenes and most heteroacenes.     

Thienopyrrolyl dione end-capped oligothiophene ambipolar semiconductors for thin film- and light emitting transistors

The design, synthesis and structure-property investigation of a new thienopyrrolyl dione substituted oligothiophene material showing reduced band gap energy, low lying LUMO energy level and ambipolar semiconducting behaviour is described.     

Pyridyl Pyrrolide Boron Complexes: The Facile Generation of Thermally Activated Delayed Fluorescence and Preparation of Organic Light‐Emitting Diodes

The electron positive boron atom usually does not contribute to the frontier orbitals for several lower‐lying electronic transitions, and thus is ideal to serve as a hub for the spiro linker of light‐emitting molecules, such that the electron donor (HOMO) and acceptor (LUMO) moieties can be spatially separated with orthogonal orientation. On this basis, we prepared a series of novel boron complexes bearing electron deficient pyridyl pyrrolide and electron donating phenylcarbazolyl fragments or triphenylamine. The new boron complexes show strong solvent‐polarity dependent charge‐transfer emission accompanied by a small, non‐negligible normal emission. The slim orbital overlap between HOMO and LUMO and hence the lack of electron correlation lead to a significant reduction of the energy gap between the lowest lying singlet and triplet excited states (ΔE_T‐S) and thereby the generation of thermally activated delay fluorescence (TADF).     

Configuration-dependent interface charge transfer at a molecule-metal junction

The role of the molecule-metal interface is a key issue in molecular electronics. Interface charge transfer processes for 4-fluorobenzenethiol monolayers with different molecular orientations on Au(111) were studied by resonant photoemission spectroscopy. The electrons excited into the LUMO or LUMO+1 are strongly localized for the molecules standing up on Au(111). In contrast, an ultrafast charge transfer process was observed for the molecules lying down on Au(111). This configuration-dependent ultrafast electron transfer is dominated by an adiabatic mechanism and directly reflects the delocalization of the molecular orbitals for molecules lying down on Au(111). Theoretical calculations confirm that the molecular orbitals indeed experience a localization-delocalization transition resulting from hybridization between the molecular orbitals and metal surface. Such an orientation-dependent transition could be harnessed in molecular devices that switch via charge transfer when the molecular orientation is made to change.     

A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors

A novel thiophene substituted isoindigo and its copolymer with benzothiadiazole have been synthesized. The polymer with low lying LUMO energy levels exhibits excellent ambipolar behavior in field effect transistors with both hole and electron mobilities recorded over 0.1 cm(2) V(-1) s(-1).     

A re-interpretation of the UV-photoelectron spectra of dewar benzene,norbornadiene and barrelene by ab initio configuration interaction calculations

Ab initio configuration interaction calculations of the ground and cationic states of Dewar benzene, norbornadiene and barrelene have enabled a firm assignment of the uv-photoelectron spectra in the range 8–16 eV to be made. Many of the states are of Koopman's one-electron process type, and the order of states is close to that of the SCF double zeta ground state calculations. A number of shake-up doublet states were computed, and for barrelene at least, these appear from about 12 eV onwards; the lowest lying triplet and singlet states for barrelene were computed at 3.82 and 6.04 eV, respectively, and most of the low-lying shake-up states are related to this HOMO—LUMO pair of transitions.     

An Electron‐Deficient Building Block Based on the B←N Unit: An Electron Acceptor for All‐Polymer Solar Cells

A double B←N bridged bipyridyl (BNBP) is a novel electron‐deficient building block for polymer electron acceptors in all‐polymer solar cells. The B←N bridging units endow BNBP with fixed planar configuration and low‐lying LUMO/HOMO energy levels. As a result, the polymer based on BNBP units (P‐BNBP‐T) exhibits high electron mobility, low‐lying LUMO/HOMO energy levels, and strong absorbance in the visible region, which is desirable for polymer electron acceptors. Preliminary all‐polymer solar cell (all‐PSC) devices with P‐BNBP‐T as the electron acceptor and PTB7 as the electron donor exhibit a power conversion efficiency (PCE) of 3.38 %, which is among the highest values of all‐PSCs with PTB7 as the electron donor.     

Azo‐MICs: Redox‐Active Mesoionic Carbene Ligands Derived from Azoimidazolium Dyes

Azoimidazolium dyes were used as precursors for mesoionic carbene ligands (Azo‐MICs). The properties of these ligands were examined by synthesizing Rh^I, Au^I, and Pd^II complexes. Experimental (NMR, IR) and theoretical investigations show that Azo‐MICs are potent σ‐donor ligands. Yet, they feature a small singlet–triplet gap and very low‐lying LUMO levels. The unique electronic properties of Azo‐MICs allow for reversible one‐electron reductions of the metal complexes, as evidenced by cyclic voltammetry.     

On electronic states and bond lengths of the truncated icosahedral C60 molecule

The electronic states and the bond lengths of the truncated icosahedral C₆₀ molecule have been calculated by the Hückel and Coulson-Golebiewski self-consistent Hückel methods. C₆₀ has a stable closed shell with a rather big energy gap (= 0.847β) between the HOMO and the LUMO. We have obtained two kinds of bond lengths r₁ = 1.434 Å and r₂ = 1.403 Å, which correspond to the edges of the regular pentagon and the edge of a hexagon not lying on a pentagon.     

Structure, bonding, and reactivity of Ti and Zr amidate complexes: DFT and X-ray crystallographic studies

Easily prepared and highly modular organic amide proligands have been used to synthesize a series of new bis(amidate)-bis(amido) Ti and Zr complexes via protonolysis. These complexes have been structurally characterized by NMR spectroscopy and X-ray crystallography. The solid-state molecular structures of these complexes indicate that the amidate ligands bind to the metal centers in an exclusively bidentate fashion, resulting in discrete monomeric species. Geometric isomerism in these species is highly dependent upon the steric characteristics of the proligands utilized in the synthesis. In solution, these complexes are observed to isomerize on the NMR time scale, with one isomer being predominant. Bonding in the bis(amidate)-bis(amido) complexes was investigated by DFT calculations. The geometric isomers predicted by theory matched the experimentally observed results, within experimental error. The orbitals associated with amidate-metal bonding are energetically well below the frontier orbitals. The HOMO in these complexes is a pi orbital associated with amido ligand-to-metal bonding character, while the LUMO in all cases is a vacant d orbital on the metal center.     

Spectroscopy, electrochemistry, and molecular orbital calculations of metal-free tetraazaporphyrin, -chlorin, -bacteriochlorin, and -isobacteriochlorin

Metal-free tetraazachlorin (TAC), -bacteriochlorin (TAB), and -isobacteriochlorin (TAiB) were characterized by electronic absorption, magnetic circular dichroism (MCD), fluorescence, and time-resolved ESR (TR-ESR) spectroscopy, and by cyclic voltammetry. The results are compared with those of metal-free tetraazaporphyrin (TAP). The potential difference DeltaE between the first oxidation and reduction couples decreases in the order TAP>TAiB>TAC>TAB. The splitting of both the Q and Soret bands decreases in the order TAB>TAC>TAP>TAiB. Corresponding to the split absorption bands, MCD spectra show a minus-to-plus pattern with increasing energy in both the Q and Soret regions, which suggests that the energy difference between the HOMO and second HOMO is larger than that between the LUMO and second LUMO. These spectroscopic properties and redox potentials were reproduced by molecular orbital calculations using the ZINDO/S Hamiltonian. The fluorescence quantum yields of the reduced species are much smaller than that of TAP. The zero-field splitting (ZFS) parameters D and E of the excited triplet states (T1) of these species decrease and increase, respectively, on going from TAP to TAC and further to TAB. The D and E values of TAiB are larger than those of the other species. The results are supported by the absence of interaction between the spin over reduced pyrrole moieties of the HOMO and over the LUMO, and by calculations of ZFS under a half-point-charge approximation.     

Synthesis of thiophene-substituted aza-BODIPYs and their optical and electrochemical properties

A series of novel thiophene-substituted aza-BODIPY dyes were synthesized by means of a standard procedure and complemented by a Stille-coupling of a brominated species with 2-tributylstannylthiophene. The optical as well as the electrochemical properties of the compounds were investigated and compared to result of density functional theory (DFT) calculations. The influence of the thiophene substituents is discussed in dependence of the position at the aza-BODIPY core regarding the HOMO and LUMO frontier orbitals. The different distributions of the HOMO and LUMO coefficients over the BODIPY core lead to a variable influence of the thiophene substituents on the HOMO and LUMO energies, being the origin of the tunable optical and electrochemical properties.     

Rigid Conjugated Twisted Truxene Dimers and Trimers as Electron Acceptors

A new class of rigid twisted truxenone oligomers with an enlarged π backbone has been established by oxidative dimerization reactions. The resulting extended conjugated systems have large extinction coefficients and low‐lying LUMO levels and show good solubility in common organic solvents, thus making them attractive compounds as new electron acceptors in organic electronics. Their suitability as electron acceptors has been demonstrated in bulk‐heterojunction organic solar cells with poly({4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl}{3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7) as the donor material.     

Tetrathiafulvalene-Inserted Diphenoquinone: Synthesis,Structure, and Dynamic Redox Property

A new tetrathiafulvalene (TTF) derivative is synthesized, which is substituted with two phenoxy radicals on one 1,3-dithiole ring, and may have either open-shell diradical or closed-shell extended-quinoidal ground states. X-ray single crystal analysis and NMR measurements prove that this molecule has a closed-shell extended quinoidal structure both in the solid state and in solution. DFT calculations show the donor–acceptor electronic properties of this molecule with a well-separated HOMO–LUMO distribution and a small HOMO–LUMO energy gap. Because of this donor–acceptor character, this molecule gives both the dication and the dianion species by electrochemical oxidation and reduction. Furthermore, during the redox process between the neutral and dication states, this molecule exhibits unique changes in the cyclic voltammogram upon repeating the cycles or varying the scan rate. The observed electrochemical behavior is explained by the conformational changes in the electrochemically generated species, thus indicating that this molecule is classified as a dynamic redox system.     

Cover Picture: QM/MM Car‐Parrinello Molecular Dynamics Study of the Solvent Effects on the Ground State and on the First Excited Singlet State of Acetone in Water (ChemPhysChem 11/2003)

The cover picture shows …?‥the solvent effect of water upon the lowest‐lying singlet excitation in acetone. The transition, which involves the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), is blue‐shifted in water (sol) with respect to the gas phase (vac), since the HOMO is stronger stabilized in water than the LUMO. The authors calculate the absorption and fluorescence spectra of acetone in water with a hybrid Car–Parrinello quantum chemical/classical molecular dynamics approach and investigate the influence of the solvent. The lower part of the picture shows the excitation energy during a simulation. One configuration with a very high excitation energy (three hydrogen bonds, short C?O bond) and one configuration with a very low excitation energy (two hydrogen bonds, long C?O bond) are shown in detail. Find out more in the article by Rothlisberger and co‐workers on pages pp. 1177–1182.