Thin-film solid-state electroluminescent devices based on tris(2,2'-bipyridine)ruthenium(II) complexes

The behavior of light-emitting electrochemical cells (LEC) based on solid films ( approximately 100 nm) of tris(2,2'-bipyridine)ruthenium(II) between an ITO anode and a Ga-In cathode was investigated. The response times were strongly influenced by the nature of the counterion: small anions (BF(4)(-) and ClO(4)(-)) led to relatively fast transients, while large anions (PF(6)(-), AsF(6)(-)) produced a slow time-response. From comparative experiments of cells prepared and tested in a glovebox to those in ambient, mobility of the anions in these films appears to be related to the presence of traces of water from atmospheric moisture. An electrochemical model is proposed to describe the behavior of these LECs. The simulation results agreed well with experimental transients of current and light emission as a function of time and show that the charge injection is asymmetric at the two electrodes. At a small bias, electrons are the major carriers, while for a larger bias the conduction becomes bipolar.     

Photophysical properties of ruthenium(II) tris(2,2'-bipyridine) complexes bearing conjugated thiophene appendages

A small series of ruthenium(II) tris(2,2'-bipyridine) complexes has been synthesized in which ethynylated thiophene residues are attached to one of the 2,2'-bipyridine ligands. The photophysical properties depend on the conjugation length of the thiophene-based ligand, and in each case, dual emission is observed. The two emitting states reside in thermal equilibrium at ambient temperature and can be resolved by emission spectral curve-fitting routines. This allows the properties of the two states to be evaluated in both fluid butyronitrile solution and a transparent KBr disk. It is concluded that both emitting states are of metal-to-ligand charge-transfer (MLCT) character, and despite the presence of conjugated thiophene residues, there is no indication for a low-lying pi,pi*-triplet state that promotes nonradiative decay of the excited-state manifold. A key feature of these systems is that the conjugation length imposed by the thiophene-based ligand helps to control the rate constants for both radiative and nonradiative decay from the two MLCT triplet states.     

Time-resolved photoacoustics study of the ruthenium(II) bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine) complex

The formation and the decay of the triplet metal to ligand charge transfer state ((3)MLCT) of ruthenium(II) bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine) (Ru(bpy)(2)(dcbpy)) were characterized using photoacoustic calorimetry. At pH 6 and 2, the (3)MLCT state formation leads to a volume change of -8 mL mol(-1) and enthalpy changes of 17 kcal mol(-1) and 13 kcal mol(-1), respectively. We attribute the volume contraction to structural changes and to solvent electrostriction. At pH 4, the photoexcitation of the complex leads to an expansion of 14 mL mol(-1) and an enthalpy change of approximately 119 kcal mol(-1) due to protonation of the carboxyl group in the excited state.     

Stability of thin-film solid-state electroluminescent devices based on tris(2,2'-bipyridine)ruthenium(II) complexes

The factors affecting the operating life of the light-emitting electrochemical cells (LECs) based on films of tris(2,2'-bipyridine)ruthenium(II) both in sandwich (using an ITO anode and a Ga:Sn cathode) and planar (using interdigitated electrode arrays (IDAs)) configurations were investigated. Stability of these devices is greatly improved when they are produced and operated under drybox conditions. The proposed mechanism of the LEC degradation involves formation of a quencher in a small fraction of tris(2,2'-bipyridine)ruthenium(II) film adjacent to the cathode, where light generation occurs, as follows from the observed electroluminescence profile in the LECs constructed on IDAs, showing that the charge injection in such devices is highly asymmetric, favoring hole injection. Bis(2,2'-bipyridine)diaquoruthenium(II) is presumed to be the quencher responsible for the device degradation. A microscopic study of photo- and electroluminescence profiles of planar light-emitting electrochemical cells was shown as a useful approach for studies of charge carrier injection into organic films.     

The unexpected preference for the fac-isomer with the tris(5-ester-substituted-2,2'-bipyridine) complexes of ruthenium(II)

The synthesis of a number of new 2,2'-bipyridine ligands, functionalized with bulky ester side groups, is reported (L2-L8). Their reaction with [Ru(DMSO)(4)Cl(2)] gives rise to tris-chelate ruthenium(II) metal complexes which show an unusually high proportion of the fac-isomer, as judged by (1)H NMR following conversion to the ruthenium(II) complex of 2,2'-bipyridine-5-carboxylic acid methyl ester (L1). The initial reaction appears to have thermodynamic control with the steric bulk of the ligands causing the third ligand to be labile under the reaction conditions used, giving rise to disappointing yields and allowing rearrangement to the more stable facial form. DFT studies indicate that this does not appear to be as a consequence of a metal centered electronic effect. The two isomers of [Ru(L1)(3)](PF(6))(2) were separated into the two individual forms using silica preparative plate chromatographic procedures, and the photophysical characteristics of the two forms compared. The results appear to indicate that there is no significant difference in both their room temperature electronic absorption and emission spectra or their excited state lifetimes at 77 K.     

Simultaneous control of spectroscopic and electrochemical properties in functionalised electrochemiluminescent tris(2,2'-bipyridine)ruthenium(II) complexes

Using a combination of electrochemical, spectroscopic and computational techniques, we have explored the fundamental properties of a series of ruthenium diimine complexes designed for coupling with other molecules or surfaces for electrochemiluminescence (ECL) sensing applications. With appropriate choice of ligand functionality, it is possible to manipulate emission wavelengths while keeping the redox ability of the complex relatively constant. DFT calculations show that in the case of electron withdrawing substituents such as ester or amide, the excited state is located on the substituted bipyridine ligand whereas in the case of alkyl functionality it is localised on a bipyridine. The factors that dictate annihilation ECL efficiency are interrelated. For example, the same factors that determine ΔG for the annihilation reaction (i.e. the relative energies of the HOMO and LUMO) have a corresponding effect on the energy of the excited state product. As a result, most of the complexes populate the excited state with an efficiency (Φ(ex)) of close to 80% despite the relatively wide range of emission maxima. The quantum yield of emission (Φ(p)) and the possibility of competing side reactions are found to be the main determinants of ECL intensity.     

Photexcitation of aqueous ruthenium(II)-tris-(2,2'-bipyridine) with high-intensity femtosecond laser pulses

We report a femtosecond pump-probe study on the photochemistry of concentrated aqueous solutions of [RuII(bpy)3]2+, as a function of pump power (up to 2 TW/cm2) at 400 nm excitation. The transient absorption spectra in the 345-660 nm range up to 1 ns time delay enable the observation of the following photoproducts: the triplet 3MLCT (metal-to-ligand-charge-transfer) excited state, the reduced form [RuII(bpy)3]+, the oxidized species [RuIII(bpy)3]3+, and the solvated electron e(aq). The 3MLCT state is formed within the excitation pulse and undergoes vibrational relaxation in 3-5 ps, as evidenced by the shift of the ligand-centered (LC) absorption band below 400 nm. Even at the highest pump powers, the majority of e(aq) originates from multiphoton ionization of [RuII(bpy)3]2+ and not from the solvent, generating [RuIII(bpy)3]3+ as a byproduct. At 10 ps time delay, the total concentration of the three product species is balanced by the depleted concentration of [RuII(bpy)3]2+, even at the highest fluences used, indicating that no further reaction products significantly contribute to the overall photochemistry. On the 100 ps time scale, most probably diffusion-controlled reduction of ground-state [RuII(bpy)3]2+ by solvated electrons occurs, next to recombination between e(aq) and [RuIII(bpy)3]3+.     

Luminescent properties of tris(2,2'-bipyridine)ruthenium(II) in sol-gel-processed dip-coated thin films

The luminescence decay and spectral behavior of ruthenium(II)-tris-1,2-bipyridine dichloride dissolved in different organically modified silicate gel matrixes were investigated. Dip-coated thin films were synthesized from tetraethoxysilane (TEOS), methyltriethoxysilane (MTEOS), ethyltriethoxysilane (ETEOS), and methyl- trimethoxysilane (MTMOS). A blue shift in the ruthenium complex emission spectrum with respect to the aqueous solution was observed for all the films on the sol to gel conversion. This spectral shift was slightly dependent on the precursor used to obtain the films and independent of the reaction pH to prepare the "sol". In the data treatment of the time-resolved luminescence measurements, it was assumed that the distribution of the luminophore in the films was nonhomogeneous. The analysis of the luminescence decay profiles was based on a multisite model. All decay curves are best described by a double-exponential model. The parameters of the decay components depended principally on the thermal treatment used in the processing of the films. The lifetimes decreased and the emission espectra showed a red shift with the increase in the drying temperature. A luminescence quenching of the ruthenium complex in the films by dissolved oxygen in aqueous solution was also observed. The quenching rate constant obtained from the preexponential amplitude-weighted mean lifetimes (tau(M)) was in the order of 10(9) M(-1) s(-1). When a phenolic derivative was used as quencher the process rate was greatly reduced compared to the quenching in water. It would seem that the metallic complex sequestered within the film is placed either into a higher microviscosity microenvironment or in a location which the phenolic quencher cannot access. In both cases, the quenching plot based on tau(o)(M)/tau(M) could be fitted satisfactorily by a sum of two terms of Stern-Volmer. This fact is indicative of the matrix microheterogeneity for the films and is fully consistent with the biexponential nature of the luminescence intensity decay profiles.     

Effect of the parent ligand on the photophysical properties of closely-coupled, binuclear ruthenium(II) tris(2,2'-bipyridine) complexes

The photophysical properties of closely-coupled, binuclear complexes formed by connecting two ruthenium(II) tris(2,2'-bipyridine) complexes via an alkynylene group differ significantly from those of the relevant mononuclear complex. In particular, the energy of the first triplet excited state is lowered relative to the parent complex, because of the presence of the alkynylene substituent, while the triplet lifetime is prolonged, in part, because of extended electron delocalization. We now report that the triplet lifetime is also affected by the nature of the spectator 2,2'-bipyridyl ligands. Thus, replacing the parent 2,2'-bipyridine ligands with the corresponding 4,4'-dinitro-substituted ligands serves to decrease the luminescence yield and lifetime. With the corresponding carboxylate ester, the luminescence yield and lifetime are increased. Perdeuteration of the parent 2,2'-bipyridine ligands also leads to a modest increase in the luminescence yield. Such observations are indicative of electronic coupling between the various metal-to-ligand, charge-transfer excited triplet states. Temperature dependence studies confirm that these excited states are closely spaced and thermally accessible at ambient temperature. For some of the binuclear complexes, the quantum yield for formation of the lowest-energy triplet state is significantly less than unity.     

Vitamin C derivatives as new coreactants for tris(2,2'-bipyridine)ruthenium(II) electrochemiluminescence

Vitamin C derivatives (VCDs) have been widely used as the alternative and stable sources of vitamin C, and accordingly exhibit many new applications, such as anti-tumor and central nervous system drug delivery. In this study, their Ru(bpy)₃²⁺ electrochemiluminescence (ECL) properties have been investigated for the first time using well-known ascorbyl phosphate and ascorbyl palmitate as representative VCDs. Ascorbyl phosphate and ascorbyl palmitate are VCDs with different substituted positions. Both of them increase Ru(bpy)₃²⁺ ECL, indicating that other VCDs may also enhance Ru(bpy)₃²⁺ ECL signal. The calibration plot for ascorbyl phosphate is linear from 3 × 10⁻⁶ to 1.0 × 10⁻³ M with a detection limit of 1.4 × 10⁻⁶ M at a signal-to-noise ratio of 3. The relative standard deviation is 3.6% for six replicate measurements of 0.01 mM ascorbyl 2-phosphate solution. The proposed method is about one order of magnitude more sensitive than electrochemical and UV–vis methods for the determination of ascorbyl phosphate, and is used successfully for the determination of ascorbyl phosphate in whitening and moisturising body wash.     

Changing the role of 2,2'-bipyridine from secondary ligand to protagonist in [Ru(bpy)2(N-N)]2+ complexes: low-energy, red emission from a ruthenium(II)-to-2,2'-bipyridine 3MLCT state

Two new bidentate ligands (1 and 2) with bicyclic guanidine moieties were synthesized and attached to a Ru(II)(bpy)(2) core (bpy = 2,2'-bipyridine) to afford complexes 3 and 4, which were characterized by spectroscopic and electrochemical methods. Complex 4 was further characterized by X-ray crystallography. In cyclic voltammetric studies, both complexes show a Ru(II/III) couple, which is 500 mV less positive than the Ru(II/III) couple of Ru(bpy)(3)(2+). The (1)MLCT and (3)MLCT states of 3 (560 nm/745 nm) and 4 (550 nm/740 nm) are significantly red-shifted with respect to Ru(bpy)(3)(2+) (440 nm/620 nm). Compounds 3 and 4 exhibit emission from a Ru(II)-to-bpy (3)MLCT state, which is rarely the emitting state at λ > 700 nm in [Ru(bpy)(2)(N-N)](2+) complexes.     

Isotope effects on the picosecond time-resolved emission spectroscopy of tris(2,2'-bipyridine)ruthenium (II)

The excited-state properties of the transition metal complexes tris(2,2'-bipyridine) ruthenium(II) and tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) are examined using picosecond time-resolved luminescence spectroscopy. For both complexes, direct observation of a short-lived high-energy emission with a lifetime of less than 4 ps is reported. Upon deuteriation of the complexes the lifetime of the high-energy emission shows a marked increase with a biexponential decay (20 and approximately 300 ps components). Examination by time-resolved excited-state resonance Raman shows that for the perprotio complexes features attributable to the 3MLCT excited state are formed within 4 ps, while for the perdeuterio a rise time of approximately 20 ps is observed in the 3MLCT features. The results indicate that the emission in both cases may be 1MLCT in origin and are discussed with respect to heterogeneous electron transfer.     

Direct ion exchange of tris(2,2'-bipyridine)ruthenium(II) into an alpha-zirconium phosphate framework

The first direct ion exchange of a luminescent metal complex into an alpha-zirconium phosphate framework has been accomplished. A hydrated form of alpha-ZrP, with an expanded 10.3 A interlayer distance, has been used for the intercalation of Ru(bpy)(3)(2+), resulting in further expansion to 15.2 A. The Ru(bpy)(3)(2+) luminescence band is slightly blue-shifted. High Ru(bpy)(3)(2+) loadings lead to luminescence self-quenching.     

Direct observation of the fourth MLCT triplet state in ruthenium(II) tris(2,2'-bipyridine)

The luminescence properties of ruthenium(ii) tris(2,2'-bipyridine) have been recorded in butyronitrile solution and in a transparent KBr disk over a reasonable temperature range. In solution, spectral curve fitting routines indicate that emission arises solely from an ensemble of triplet states, each of which is of Metal-to-Ligand, Charge-Transfer (MLCT) character and of closely comparable energy. At ambient temperature, dual emission is observed for the KBr disk and interpreted in terms of luminescence from both the ensemble and the fourth MLCT triplet state that lies at slightly higher energy. Relative reorganisation energies, energies, Huang-Rhys factors and radiative rate constants have been calculated for the two emissive states. It is confirmed that the fourth MLCT triplet state possesses more singlet character than the ensemble.     

Mechanochromic luminescence switch of platinum(II) complexes with 5-trimethylsilylethynyl-2,2'-bipyridine

Planar platinum(II) complexes Pt(bpyC≡CSiMe(3))(C≡CC(6)H(4)R-4)(2) (R = H (1), Bu(t) (2)) with 5-trimethylsilylethynyl-22'-bipyridine show an unusual, reversible, and reproducible mechanical stimuli-responsive color and luminescence switch. When crystalline 1 or 2 is ground, bright yellow-green emitting is immediately converted to red luminescence with an emission red shift of 121-155 nm for 1 or 53-89 nm for 2. Meanwhile, the crystalline state is transformed to an amorphous phase that can be reverted to the original crystalline state by organic vapor adsorbing or heating, along with red luminescence turning back to yellow-green emitting. The reversibility and reproducibility of luminescence mechanochromic properties have been dynamically monitored by the variations in emission spectra and X-ray diffraction patterns. The drastic grinding-triggered emission red shift is likely involved in the formation of a dimer or an aggregate through Pt-Pt interaction, resulting in a conversion of the (3)MLCT/(3)LLCT emissive state in the crystalline state into the (3)MMLCT triplet state in the amorphous phase. Compared with the drastic grinding-triggered emission red shift in 1 (121-155 nm), the corresponding response shift in 2 (53-89 nm) is much smaller since a bulky tert-butyl in C≡CC(6)H(4)bu(t)-4 induces the planar platinum(II) molecules to stack through a longer Pt-Pt distance and less intermetallic contact compared with that in 1, as suggested from EXAFS studies.     

Photolysis of (Diamine)bis(2,2'-bipyridine)ruthenium(II) Complexes Using On-Line Electrospray Mass Spectrometry

Photolysis of Ru(bpy)(2)(en)(2+) and Ru(bpy)(2)(tn)(2+), where bpy = 2,2'-bipyridine, en = ethylenediamine, and tn = 1,3-propylenediamine, was studied in acetonitrile using on-line electrospray mass spectrometry (ES-MS). These complexes are known to undergo a four-electron oxidation photochemically, giving the alpha,alpha'-diimine complexes. The monoimine complexes involved in this stepwise process were detectable after photoirradiation (lambda >420 nm). Also, new ligand-oxidized complexes Ru(bpy)(2)(en+14)(2+) and Ru(bpy)(2)(tn+14)(2+) were observed together with photosubstitution products such as Ru(bpy)(2)(AN)(2)(2+) and Ru(bpy)(2)(AN)(2)X(+) (AN = acetonitrile). The notation (en+14) and (tn+14) represents loss of two hydrogen atoms and addition of an oxygen atom to the en and tn ligands. Photosubstitution intermediates with the monodentate diamine, Ru(bpy)(2)(tn)(AN)(2+) and Ru(bpy)(2)(tn)(AN)X(+), were detected in the ES mass spectrum of the tn complex but not in that of the en complex. Other photosubstituted intermediates with the monodentate (en+14) and (tn+14) ligands were detected by on-line mass analysis. The electrospray technique combined with use of a flow-through photoreaction cell was shown to be a useful tool for studying photolysis of inorganic metal complexes.