197Au Mössbauer study of Au/Ni artificial multilayers

¹⁹⁷Au Mössbauer measurements have been performed at 16 K on the Au/Ni artificial multilayers having three different thickness of the layers those are 10Å Au/10Å Ni, 30Å Au/30Å Ni and 53Å Au/53Å Ni on a 250Å pure Au buffer layer. Mössbauer spectra obtained can be decomposed into mainly two components. One is an unperturbed component having an identical isomer shift value to the bulk Au metal. The other is the component perturbed strongly by the Ni layer indicating a broad contribution at positive velocity side and its intensity depends on the thickness of the Au layer. The spectrum from 10Å Au/10Å Ni multilayer is an entirely perturbed one and its area ratio to the component rising from pure Au buffer layer indicates the large Debye-Waller-factor suggesting the supermodulus effect in this multilayer.     

Magnetostatic interaction in electrodeposited Ni/Au multilayer nanowire arrays

Ordered Ni/Au multilayer nanowire arrays are successfully fabricated inside the nanochannels of anodic aluminum oxide template by pulse electrodeposition method. The thickness of the alternating layers is controlled to examine the magnetostatic interaction in Ni/Au multilayer nanowires. The magnetic easy axis parallel to the nanowires indicates that here the magnetostatic coupling along the wire axis dominates over the interactions perpendicular to the nanowires. However,the magnetostatic interaction between adjacent nanowires with larger magnetic layers is enhanced, leading to the existence of an optimum coercivity value.     

Magnetic depth profiling of Fe/Au multilayer using neutron reflectometry

We present unpolarized and polarized neutron reflectometry data on Fe/Au multilayer sample for characterizing the layer structure and magnetic moment density profile. Fe/Au multilayer shows strong spin-dependent scattering at interfaces, making it a prospective GMR material. Fe/Au multilayer with bilayer thickness of 130 Å was grown on Si substrate by RF magnetron sputtering technique. Unpolarized neutron reflectivity measurement yields nuclear scattering length density profile. The magnetic scattering length density profile has been obtained from polarized neutron reflectivity measurements.     

Structure and magnetic properties of magnetron-sputtered [(Fe/Pt/Fe)/Au]n multilayer films

Using dc magnetron sputtering, Fe/Pt/Au multilayer films were prepared, and the effects of Au layer thickness and annealing temperature on structure and magnetic properties of the Fe/Pt/Au multilayer films were investigated. The as-deposited Fe/Pt/Au multilayer films have good periodic structure with composition modulation along the growth direction. The stress stored in the as-deposited films promoted the ordering of the films annealed at 400 °C. When the films were annealed at 500 °C, the thicker Au layer could restrain the order-disorder transformation region volume and lead to the decrease of the ordered volume fraction with Au layer thickness increasing.     

Influence of the Ohmic Contact Structure on the Performance of GaAs/AlGaAs Photovoltaic Converters

A multilayer system of ohmic contacts for GaAs/AlGaAs photovoltaic converters has been developed. A method of ohmic contact blackening is suggested with the aim of improving the coefficient of optical signal reflection from an Ag/Au/Ag multilayer contact. Owing to blackening, the reflection coefficient has been decreased more than tenfold.     

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

High-temperature application of the low-emissivity Au/Ni films on alloys

The 200 nm-thickness Ni film was imposed as the diffusion barrier layer between the Au film and the alloy substrate to improve the low-emissivity durability of the Au film at high temperature. The results show that the Au/Ni multilayer films still kept low emissivity after working at 600 °C for 200 h. It was concluded that the Ni interlayer effectively retarded the diffusion between gold film and the metal alloy below 600 °C.     

Dumbbell to Core–Shell Structure Transformation of Ni–Au Nanoparticle Driven by External Stimuli

Conversion of CO₂ gas to CO fuels is one of the most promising solutions for the increasing threat of global warming and energy crisis. The efficient catalyst Ni–Au dumbbell converting CO₂ into CO at elevated temperatures has high CO product selectivity; however, the accompanied atomic diffusion and subsequent surface reconstruction affect the catalytic efficiency of chemical reaction. Atomic scale characterization of structural evolution of the catalyst, which is essential to correlate the functional mechanism to active catalyst surfaces, is yet to be studied. Here, in situ transmission electron microscopy experiments and atomistic simulations are performed to characterize the structural evolution of Ni–Au dumbbell nanoparticles under two different external stimuli. In the condition of high temperature and vacuum, the Ni–Au nanostructure reveals a clear shape reconstruction from the initial dumbbell to core–shell‐like, which is induced by capillary force to minimize free surface energy of the system. The shape transformation involves two stages of processes, initial fast Au diffusion followed by slow source‐controlled diffusion. At ambient temperature, the combination of CO₂ and electron flux surprisingly induces analogous structural transformation of Ni–Au nanostructure, where the associated chemical reaction and CO absorption stimulate the Au migration on Ni surface. Such surface reconstruction can be widely present in catalytic reactions in different environmental conditions, and the results herein demonstrate the detailed processes of Ni–Au structure evolution, which provide important insights for understanding the catalyst performance.     

TEMPERATURE DEPENDENCE OF ANISOTROPY IN Co/X(Pt, Au, Ag, Ni) MULTILAYER FILMS

Temperature dependences of effective perpendicular anisotropy (PA) K_u and inter-face energy K_s for Co/X(Pt, Au, Ag, Ni) multilayer films(MFs) as well as of spontaneous magnetization M_s for Co/Pt and Co/Au MFs are reported. The dependence of K_s on T dis-tinguishes between Go/Au, Co/Ni and Co/Pt, Co/Ag MFs, i.e., K_s of the former decreases with the increase of T, but it increases for the latter. Co/Pt MFs with the perpendicular anisotropy possess a large enhancement of M_s at low temperature, but there is not any en-hancement for Co/Au MFs. We have discussed the source of PA in Co/Au and Co/Pt MFs and speculated that the strain due to the lattice mismatch may be the main cause of PA in Co/Au MFs, but it is not for Co/Pt MFs.     

CdTe太阳电池的不同背电极和背接触层的特性研究

用Ni替代Au来作为CdTe太阳电池的背电极，比较了Ni,Ni/Au,Au/Ni及Au背电极对电池性能的影响.发现Ni作为背电极和ZnTe/ZnTe:Cu复合层接触，电池的开路电压V_oc略有降低，填充因子FF有增有减，变化幅度不大，但因短路电流I_sc有较大的提高，转换效率η平均增长4％.测试了不同背电极的CdTe太阳电池的暗I-V和C-V特性，对背电极剥离后的样品进行了XPS测试分析.结果表明，Ni扩散到ZnTe/ZnTe:Cu复合层的深度比Au多，且大多呈离子态，与ZnTe/ZnTe:Cu复合层中的富Te离子形成Ni_xTe，提高了掺杂浓度，使电池性能获得改善. 关键词： 金属背电极 复合背接触层 转换效率 CdTe太阳电池     

Growth and sacrificial oxidation of transition metal nanolayers

Growth and oxidation of Au, Pt, Pd, Rh, Cu, Ru, Ni and Co layers of 0.3-4.3 nm thickness on Mo have been investigated with ARPES and AFM. Co and Ni layers oxidize while the Mo remains metallic. For nobler metals, the on top O and oxidation state of subsurface Mo increase, suggesting sacrificial e⁻ donation by Mo. Au and Cu, in spite of their significantly lower surface free energy, grow in islands on Mo and actually promote Mo oxidation. Applications of the sacrificial oxidation in nanometer thin layers exist in a range of nanoscopic devices, such as nano-electronics and protection of e.g. multilayer X-ray optics for astronomy, medicine and lithography.     

Graphene-graphite phase transition at the surface of a carbonized metal

A phase transition leading to the transformation of a graphene layer into a multilayer graphite film at the surface of a carbonized metal has been experimentally studied on the atomic level under ultrahigh-vacuum conditions. It has been shown that this process is governed by dynamic equilibrium between edge atoms of graphene islands and a chemisorbed carbon phase, two-dimensional carbon “gas,” and is observed in the temperature range of 1000–1800 K. The features of the phase transition at the surfaces Ni(111), Rh(111), and Re(10-10) are similar, although the specific kinetic characteristics of the process depend on the properties of the substrate. It has been shown that change in the emissivity of the substrate after the formation of a multilayer graphite film increases the rate of the phase transition and leads to a temperature hysteresis.     

Metallurgical behaviour of Ni/AuGe ohmic contacts to GaAs

Auger depth profiling and contact resistance measurements have been used to study sintered Ni/Au/AuGe and Ni/AuGe contacts to GaAs. The results indicate that Ge incorporation is by a process of solid state diffusion rather than by the eutectic melting-recrystallization mechanism found in AuGe contacts. In spite of the improvement in the homogeneity of the contact brought about by using Ni, the thermal stability of these contacts is found to be worse than the simple AuGe ones.     

197Au Mössbauer study of Au/Ni and Au/Fe metallic superlattices

¹⁹⁷Au Mössbauer measurements have been performed for Au/Ni and Au/Fe metallic superlattices at below 75 K. For Au/Ni superlattices, the area ratio in a spectrum between a superlattice component and that of the pure Au buffer layer has been determined at 25, 50 and 75 K. From the area ratios, it is found that the recoil-free fraction of Au in Au(10 Å)/Ni(10 Å) is larger than that of the bulk Au, suggesting the existence of the supermodulus effect in this superlattice. The¹⁹⁷Au Mössbauer spectrum obtained from Au(5 Å)/Fe(8 Å) is entirely magnetic at 16 K, suggesting the existence of a magnetic hyperfine interaction at¹⁹⁷Au nuclei through the transferred electron spin polarization.     

Anisotropy of the optical and magneto-optical response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) surfaces

The optical and magneto-optical second harmonic reflectivity response of Au/Co/Au/Cu multilayers grown on vicinal Si (111) substrates has been studied. These azimuthal optical non-linear experiments check the uniaxial character of the crystallinity of the Au buffer layer and the magnetic behavior of the ultrathin Co films in the metallic multilayer. They clearly show the strong dependence of the growth parameters and the misorientation of the vicinal surface on the SHG reflectivity signals. This uniaxial behavior is also correlated to linear MOKE experiments on the magnetic anisotropy with an easy magnetization axis parallel to the step edges. Received: 16 October 2001 / Published online: 29 May 2002     

Study of Ti/Au,Ti/Al/Au,and Ti/Al/Ni/Au ohmic contacts to <Emphasis Type="Italic">n</Emphasis>-GaN

The contacts of Ti/Au, Ti/Al/Au, and Ti/Al/Ni/Au films deposited on n-GaN were studied by current–voltage (I–V) and transmission-line-method measurements. The effect of annealing temperature on specific contact resistivity has been investigated by changing the annealing temperature from 400 to 900 °C. Ti/Al/Au and Ti/Al/Ni/Au films were superior to the bilayer (Ti/Au) in ohmic contact characteristics and thermal stability. The Ti/Al/Ni/Au composite showed the best thermal stability due to the fact that Ni plays a more important role than the alloy of Ti/Al in preventing the interdiffusion of Ti, Al, and Au. The lowest contact resistivity (10^-7cm²) to n-GaN was obtained for the Ti/Al/Ni/Au sample by short-time/high-temperature annealing. The formation mechanism of ohmic contacts to n-GaN is also discussed. PACS 73.40.Cg; 73.61.Ey     

纳米厚度贫铀/Au多层膜的制备及特性研究

理论和实验研究表明,纳米厚度周期调制的贫铀(DU)/Au多层膜材料具有高效的激光X射线转换效率. 采用交替磁控溅射制备纳米厚度的DU/Au平面多层周期结构,通过白光干涉仪、扫描电子显微镜、 X射线光电子能谱对DU/Au多层膜的几何参数、表面形貌、成分以及界面形貌进行表征.实验结果表明: 8 nm为Au连续成膜的厚度阈值,结合理论计算最优化原子配比,选取DU层厚度为30 nm、 Au层厚度为8 nm的调制周期结构;实测周期厚度为37 nm;扫描电子显微镜照片显示DU/Au分层明显; X射线光电子能谱深度刻蚀分析表明DU/Au界面处存在扩散, DU, Au, O三者原子比为73:26:1; 由于团簇效应, Au原子4f电子结合能向高能端移动,没有观察到DU相应的电子结合能移动现象.     

Fabrication and performance characterization of Al/Ni multilayer energetic films

Al/Ni multilayer bridge films, which were composed of alternate Al and Ni layers with bilayer thicknesses of 50, 100 and 200 nm, were prepared by RF magnetron sputtering. In each bilayer, the thickness ratio of Al to Ni was maintained at 3:2 to obtain an overall 1:1 atomic composition. The total thickness of Al/Ni multilayer films was 2 μm. XRD measurements show that the compound of AlNi is the final product of the exothermic reactions. DSC curves show that the values of heat release in Al/Ni multilayer films with bilayer thicknesses of 50, 100 and 200 nm are 389.43, 396.69 and 409.92 J?g^?1, respectively. The temperatures of Al/Ni multilayer films were obviously higher than those of Al bridge film and Ni bridge film. Al/Ni multilayer films with modulation of 50 nm had the highest electrical explosion temperature of 7000 K. The exothermic reaction in Al/Ni multilayer films leads to a more intense electric explosion. Al/Ni multilayer bridge films with modulation period of 50 nm explode more rapidly and intensely than other bridge films because decreasing the bilayer thickness results in an increased reaction velocity.     

Experimental investigations on the weakening effect of magnetic fields on surface‐enhanced Raman scattering

Currently, because of the wide use of magnetic/metal hybrid materials in the field of surface‐enhanced Raman scattering (SERS), magnetic fields (MFs) as a kind of surrounding environments of SERS substrates have been not ignored. And enormous attentions for the effect of MFs on SERS are very necessary. Our analysis from previous reports shows SERS signals are closely associated with MFs; yet the study of the exact effect of MFs on SERS is still in need of detail and broadening. In this work, we demonstrate that the use of Ni/Au microparticles (MPs) and Au hollow spheres (HSs) to study the effect of MFs on SERS signals. The experiments are preformed from three aspects, including the comparison of SERS signals of Ni/Au MPs with different Ms values, the comparison of SERS signals of Au HSs and Ni/Au MPs under different external MFs, and the comparison of SERS signals of single Au HS particle and single Ni/Au particle in the absence and presence of an external MF. Thereinto, under different external MFs from 0, 0.01, 0.02, 0.04 to 0.08 T, SERS signals of Au HSs and Ni/Au MPs are gradually weaker. According to the experiments, the weakening effect of MFs on SERS is confirmed. It is suggested that the weakening effect is originated from the blue‐shift of surface plasmon resonance and the locking of charge‐transfer from Au to probe molecules. Copyright © 2012 John Wiley & Sons, Ltd.