Simultaneous determination of trace uranium and thorium by radiochemical neutron activation analysis

A method for the simultaneous, radiochemical neutron activation analysis of uranium and thorium at trace levels in biological materials is described, based on a technique known as LICSIR, in which a double neutron irradiation is employed. In the first, long irradiation²³³Pa (27.0 d) is induced by neutron capture on²³²Th and then the sample is cooled for several weeks. A second short irradiation to induce²³⁹U (23.5 m) is followed by a rapid sequential radiochemical separation by solvent extraction of²³⁹U with TBP and²³³Pa with TOPO. Chemical yields of²³⁹U and²³³Pa were measured for each sample aliquot using added²³⁵U and²³¹Pa tracers from the -spectra of the separated fractions. The technique was validated by quality control analyses.     

Determination of uranium in ores using instrumental neutron activation analysis

An instrumental neutron activation analysis method based on the measurement of²³⁹Np has been developed for the determination of uranium in ores. The samples after 5 sec irradiation were cooled for 3 days and the gamma-ray spectra were measured with a 30 cm³ Ge(Li) detector. The precision and accuracy of the proposed method were determined by analysing IAEA Standard Uranium Ore samples.     

Simultaneous determination of uranium and thorium in high grade thorium ores

A routine procedure has been developed for the simultaneous determination of uranium and thorium in high concentration thorium ores. INAA is used to determine the uranium and thorium concentration. However, for very low concentrations of uranium a radiochemical procedure based on the use of NPy/benzene as an extractant has to be employed. The precision and accuracy of the method has been determined by analyzing IAEA and NBL standard thorium/uranium ores.     

The determination of uranium and thorium in rocks by neutron activation analysis

A neutron activation method is described for the determination of thorium and uranium in rocks at the microgram and submicrogram levels. Radiochemical separations are carried out using the alpha-active nuclides protactinium-231 and neptunium-237 as tracers. The method is applied to the Standard granite XXX and the standard diabase XXX.     

Determination of rare earths in low grade uranium ores and SRM-rock by instrumental neutron activation analysis

An instrumental neutron activation analysis technique has been developed for simultaneous determination of 10 REE in low grade U/Zr ores and other geological materials. The samples were irradiated with reactor neutrons for 2 min to 8 hrs followed by a cooling of 30 min to 3 weeks. The γ-ray activity was measured with a semi-planar Ge(Li) detector. A precision of 5% has been obtained by the repeated analysis of NBS-SRM. The technique is relatively simple and adaptable on the routine basis.     

Determination of trace concentrations of thorium in uranium oxide matrix by epithermal instrumental neutron activation analysis

An epithermal instrumental neutron activation analysis (EINAA) method using cadmium filter was standardized to determine trace concentrations of thorium in four samples of uranium oxide (U₃O₈) samples. Samples and thorium standards, wrapped with cadmium foil, were irradiated at a reactor neutron flux of about 10¹² cm^?2 s^?1. Radioactive assay was carried out using a Compton suppressed anticoincidence gamma ray spectrometer consisting of HPGe-BGO detectors coupled to MCA. Concentrations of thorium in these samples were found to be in the range of 15–72 mg kg^?1. EINAA results were validated by determining thorium concentrations in uranium matrix by standard addition method. EINAA results were compared with those obtained by two wet chemical methods namely ion chromatography (IC) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The results obtained by the three methods were found to be in good agreement, indicating further validity of the proposed EINAA method.     

Simultaneous determination of tantalum,niobium, thorium and uranium in placer columbite-tantalite deposits from the Akim Oda District of Ghana by epithermal instrumental neutron activation analysis

Summary Tantalum, niobium, thorium and uranium contents of 21 columbite-tantalite minerals from the Akim Oda District of Ghana have been determined using epithermal instrumental neutron activation analysis (ENAA) with a conventional counting system. As thermal neutron filters, boron carbide was encapsulated in the irradiation vials during irradiation. The samples were irradiated at one of the outer irradiation channels in the Ghana Research Reactor-1 facility, and counted directly. Various elements were identified and quantified using 172 keV of ^182mTa, 871 keV of ^94mNb, 86.5 keV of ²³³ Th and 74.7 keV of ²³⁹U. The precision and accuracy of the method were evaluated using standard reference materials and the precision was found to be within 5% with comparable accuracy. The composition of columbite-tantalite minerals ranged from 33.1% to 59.2% Ta₂O₅ and 19.2% to 44.6% Nb₂O₅, ThO₂ and U₃O₈ the levels were 0.024-0.045% and 0.014-0.048%, respectively.     

Pollution of agricultural crops with lanthanides,thorium and uranium studied by instrumental and radiochemical neutron activation analysis

The lanthanide elements, Th and U were measured in soils and agricultural crops collected in an area polluted by emissions from a phosphate fertilizer plant. Concentrations of the above elements in the soil and crop samples were determined by instrumental neutron activation analysis (INAA). Selected crop samples were also analyzed using radiochemical neutron activation analysis (RNAA) based on alkaline-oxidative fusion of the irradiated samples followed by precipitation of REE oxalates. Elevated levels of lanthanides, Th and U were found in some samples, especially in wheat chaff and parsley.     

High precision instrumental neutron activation analysis of uranium by multiple gamma-ray peak ratio determination

The method of multiple γ-ray peak ratio determination has been applied to the nondestructive neutron activation analysis of uranium in rocks and ores. The photopeaks of²³⁹Np gamma-rays produced by the activation of²³⁸U and those of the fission products of²³⁵U are a measure of the quantity of uranium in the irradiated sample, provided that the uranium is of natural isotopic composition. The ratios between the integrated areas of the different photopeaks are calculated and compared with those obtained for a uranium standard. The uranium concentration in the sample is calculated from the photopeaks whose ratios correspond, within the error limits to those of pure natural uranium. High accuracy better than ±2% has been obtained.     

Determination of uranium in thorium matrixes by epithermal neutron activation analysis

Uranium in thorium matrixes or in minerals and ores containing thorium is determined by epithermal neutron activation analysis (ENAA). In some minerals and ores, such as monazite sands, the analysis can be carried out by purely instrumental means with no chemical separation of uranium or thorium from the irradiated matrix. For thorium compound matrixes with very low uranium contents, a rapid radiochemical separation method, based on the retention of uranyl ion on anion-exchange resins, is first carried out, before counting the gamma-ray peaks for²³⁹U in multichannel analysers coupled to NaI(Tl) scintillators or to Ge(Li) detectors.     

Determination of uranium and thorium in solar salts by neutron activation analysis

Uranium and thorium contents of solar salts were measured by neutron activation analysis. In advance of neutron irradiation, U and Th were concentrated and separated from some interfering elements by neutralization in which they were precipitated with aluminium hydroxide from solutions obtained by dissolving the salts in water or dilute nitric acid solution. The uranium and thorium concentrations determined were from several hundred ppt to 10 ppb. It was strongly indicated that uranium tends to remain in the solution (brine from seawater) phase in the process of solar salt production while thorium tends to transfer to the solid (solar salt) phase.     

Multielement determination in water by instrumental neutron activation analysis

Instrumental neutron activation analysis /INAA/ technique has been applied to a water sample to determine the elemental concentrations. The sample was irradiated with a neutron flux of 1.2×10¹² n cm^–2 s^–1 for two different periods followed by counting at three different decay times, using two coaxial type high-resolution Ge/Li/ detectors. The dominant elements determined in the water sample are Ca, Cl, Na, Mg, and K present in ppm-level while Co, I, Mn, Sm, and Sb are present in smaller amounts, approximately on the average 0.01 ppm. Only traces of other elements such as the rare-earth elements, Ag, As, Ba, Cu, Cd, Fe, Sr, W, Zn, seem to be present in the water sample.     

Simultaneous determination of trace uranium and vanadium in biological samples by radiochemical neutron activation analysis

Summary A radiochemical neutron activation analysis (RNAA) for simultaneous determination of uranium and vanadium in a single sample at trace levels is described. The method is based on post-irradiation wet-ashing and solvent extraction of vanadium with N-benzoyl-N-phenyl-hydroxylamine reagent. From the remaining aqueous phase, uranium is extracted into a toluene solution of tri-n-butyl phosphate. The chemical yields are determined spectrophotometrically for vanadium and by gamma-counting of the added natural uranium carrier for uranium. The method was evaluated by the analysis of reference materials and the results showed a good agreement with the certified values. The method was applied to the determination of vanadium and uranium in five military total diet samples in Slovenia.     

Simultaneous determination of chlorine and sodium in large volume parenteral solutions by instrumental neutron activation analysis

Large volume parenteral solutions are pharmaceutical products containing as active compounds aminoacids, carbohydrates, calcium, chlorine, magnesium, potassium and sodium. A very simple fast and accurate method has been developed for the simultaneous determination of chlorine and sodium in large volume parenteral solutions by instrumental neutron activation analysis. Two reference materials were used for the precision and accuracy tests. The applicability of the method was checked by the assay of chlorine and sodium in large volume parenteral solutions from the Greek market. The results from all the analyzed samples showed that the proposed method with the advantages of simplicity (no chemical procedure is needed), rapidity (two-element analysis in one sample with one set of runs in 20 minutes) high precision and high accuracy is suitable for routine determinations of chlorine and sodium in large volume parenteral solutions.     

Aluminum determination by instrumental neutron activation analysis in tree barks

Journal of Radioanalytical and Nuclear Chemistry - Neutron activation analysis (NAA) for Al determination in tree bark samples containing phosphorus and silicon was studied. The contributions of...     

Multielement determination in soil extracts by instrumental neutron activation analysis

Forest Swiss soils from 39 locations sampled ad three depths each were extracted with a buffered solution of pH 4.65 containing EDTA. Nearly 30 elements were determined by instrumental neutron activation analysis in these extracts. The results obtained are discussed in terms of efficiency of the extractant, precision and accuracy. Summariszed results are presented for the quantities fractions of the elements extracted.     

Multi-element determination in silicate rocks by instrumental neutron activation analysis

Instrumental neutron activation analysis technique was applied for the determination of 20 elements in 54 silicate rock samples which belong to three sedimentary geological formations located in the western desert of Iraq. The samples along with USGS standards were irradiated in an IRT-5000 reactor at a neutron flux of 3.7·10¹³ n·cm^–2·s^–1 The following minor and trace element constituents have been determined: Na, K, Ca, Fe, Sc, Cr, Co, Zr, Ce, La, Nd, Sm, Eu, Tb, Yb, Lu, Hf, Ta, Th and U.     

Multi-element determination in sandstone rock by instrumental neutron activation analysis

Summary Instrumental neutron activation analysis (INAA) was used for the qualitative and quantitative analysis of sandstone samples of Aswan area, in South Egypt. The samples were properly prepared together with standards and simultaneously irradiated by a neutron flux of 7 ^. 10¹¹ n ^. cm^-2.s^-1. in the TRIGA research reactor facilities in Mainz. The gamma-spectra from a hyperpure germanium HPGe detector were analyzed. The present study provides the basic data of elemental concentrations of a sandstone rock. The following elements have been determined: Na, K, Fe, Sc, Cr, Co, Zr, Ce, La, Nd, Sm, Eu, Yb, Lu, Hf, Ta, Th and U. Energy dispersive X-ray fluorescence (EDXRF) was used for comparison and to detect elements which can be detected only by this method.     

Preconcentration and neutron activation analysis of thorium and uranium in natural waters

Uranium and thorium were analyzed in commercial bottled waters and in fresh waters, such as tap water, by neutron activation analysis. The analysis was applied after a preconcentration step from a batch of 1–3 dm³ water under investigation. The adsorption was performed in the presence of a small amount (about 1 g) of an adsorber derived from the salt of a-hydroxyquinoline and benzilic (diphenylglycolic) acid, adsorbed onto charcoal. The preconcentration method has shown to be rapid and reliable. The overall method was set in order to have an alternative method of comparison with other different methods of analysis. The proposed method may be applied to different fresh water samples. This revised version was published online in July 2006 with corrections to the Cover Date.