Integration of shock absorption and energy harvesting using a hydraulic rectifier

Hydraulic shock absorbers have been widely used to dissipate kinetic energy of the shocks into surrounding environment. By employing oscillatory motion to drive power generator, the shock energy can be converted into electricity for harvesting. However, the frequent bidirectional oscillation of the generator can cause a large impact force. This further leads to deteriorated energy harvesting performance, moving parts fatigue, and even system failure. As such, this study introduces four check values to form a hydraulic rectifier to integrate the shock absorption and energy harvesting functionalities. The bidirectional oscillation of the shock and the vibration is converted into unidirectional rotation to drive the generator. Following the proposed concept, a prototype energy-harvesting shock absorber has been designed and fabricated. An electromechanical model has also been developed to examine the response behavior of the prototype device. The prototype performance has been characterized based on the experimental results from three test setups. Both mechanical and electrical parameters of the electromechanical model have been identified based on our cyclic loading experiments. The results have shown that the developed energy-harvesting shock absorber is capable of harvesting the energy and absorbing the shock simultaneously. In our experiments, a maximum of 248.8 W instantaneous power (a maximum of 114.1 W on average) has been captured and a maximum of 38.81% energy harvesting efficiency has been achieved via harmonic excitation with an amplitude of 8 mm and a frequency of 2 Hz, when the load resistance is tuned to 7.5 Ω.     

Nonlinear dynamics of a bistable piezoelectric-composite energy harvester for broadband application

The continuing need for reduced power requirements for small electronic components, such as wireless sensor networks, has prompted renewed interest in recent years for energy harvesting technologies capable of capturing energy from ambient vibrations. A particular focus has been placed on piezoelectric materials and devices due to the simplicity of the mechanical to electrical energy conversion and their high strain energy densities compared to electrostatic and electromagnetic equivalents. In this paper an arrangement of piezoelectric layers attached to a bistable asymmetric laminate is investigated experimentally to understand the dynamic response of the structure and power generation characteristics. The inherent bistability of the underlying structure is exploited for energy harvesting since a transition from one stable configuration to another, or “snap-through”, is used to repeatedly strain the surface bonded piezoelectric and generate electrical energy. This approach has been shown to exhibit high levels of power extraction over a wide range of vibrational frequencies. Using high speed digital image correlation, a variety of dynamic modes of oscillation are identified in the harvester. The sensitivity of such modes to changes in vibration frequency and amplitude are investigated. Power outputs are measured for repeatable snap-through events of the device and are correlated with the measured modes of oscillation. The typical power generated is approximately 3.2?mW, comparing well with the needs of typical wireless senor node applications.     

Enhanced vibration energy harvesting using dual-mass systems

A type of dual-mass vibration energy harvester, where two masses are connected in series with the energy transducer and spring, is proposed and analyzed in this paper. The dual-mass vibration energy harvester is proved to be able to harvest more energy than the traditional single degree-of-freedom (dof) one when subjected to harmonic force or base displacement excitations. The optimal parameters for maximizing the power output in both the traditional and the new configurations are discussed in analytical form while taking the parasitic mechanical damping of the system into account. Consistent of the previous literature, we find that the optimal condition for maximum power output of the single dof vibration energy harvester is when the excitation frequency equals to the natural frequency of the mechanical system and the electrical damping due to the energy harvesting circuit is the same as the mechanical damping. However, the optimal conditions are quite different for the dual-mass vibration energy harvester. It is found that two local optimums exist, where the optimal excitation frequency and electrical damping are analytically obtained. The local maximum power of the dual-mass vibration energy harvester is larger than the global maximum power of single dof one. Moreover, at certain frequency range between the two natural frequencies of the dual-mass system, the harvesting power always increases with the electrical damping ratio. This suggests that we can obtain higher energy harvesting rate using dual-mass harvester. The sensitivity of the power to parameters, such as mass ratio and tuning ratio, is also investigated.     

Harvesting base vibration energy by a piezoelectric inverted beam with pendulum

We proposed a two-degrees-of-freedom inverted piezoelectric beam with pendulum to promote the performance of vibration energy harvesting. This configuration is composed of an inverted elastic beam and a pendulum attached to its free end. The electromechanical equations governing the nonlinear system were derived. The harmonic balance method(HBM)is applied to solve the equation and the results prove that there exists a 1:3 super-harmonic resonance. The simulation results show that owing to the particular nonlinearity, there appears a special bending effect in the amplitude-frequency response, i.e., bending right for the first natural frequency and left for the second natural frequency, which is beneficial for harvesting vibration energy. The HBM results are verified by the entity simulations. Furthermore, over a relatively wide range of power spectral density, it could reach a dense jumping and give a dense high pulse voltage.     

窄带随机激励双稳压电悬臂梁响应机制与能量采集研究

具有中心频率的窄带随机振动是一种典型的环境振动,其振动特征与环境的变化密切相关.本文以双稳压电悬臂梁能量采集系统为研究对象,分析系统在不同磁铁间距下的等效线性固有频率特性,以带通滤波器输出一定带宽的窄带随机激励模拟环境振动,研究系统的响应和能量采集特征.研究表明,对于一定带宽的窄带随机激励,一方面系统始终存在一个固定的磁铁间距使其输出达到峰值,另一方面当激励中心频率在一定范围内变化时,系统还分别存在另外两个或一个不同磁铁间距也能使系统输出达到峰值,而且该峰值特性是系统在其等效线性固有频率处诱导双稳或单稳“共振”形成的.研究结果可为具有窄带随机激励特征的振动能量采集提供一定的理论和技术支持.     

Stationary response of nonlinear magneto-piezoelectric energy harvester systems under stochastic excitation

Recent years have shown increasing interest of researchers in energy harvesting systems designed to generate electrical energy from ambient energy sources, such as mechanical excitations. In a lot of cases excitation patterns of such systems exhibit random rather than deterministic behaviour with broad-band frequency spectra. In this paper, we study the efficiency of vibration energy harvesting systems with stochastic ambient excitations by solving corresponding Fokker-Planck equations. In the system under consideration, mechanical energy is transformed by a piezoelectric transducer in the presence of mechanical potential functions which are governed by magnetic fields applied to the device. Depending on the magnet positions and orientations the vibrating piezo beam system is subject to characteristic potential functions, including single and double well shapes. Considering random excitation, the probability density function (pdf) of the state variables can be calculated by solving the corresponding Fokker-Planck equation. For this purpose, the pdf is expanded into orthogonal polynomials specially adapted to the problem and the residual is minimized by a Galerkin procedure. The power output has been estimated as a function of basic potential function parameters determining the characteristic pdf shape.     

The dynamic characteristics of harvesting energy from mechanical vibration via piezoelectric conversion

As an alternative power solution for low-power devices, harvesting energy from the ambient mechanical vibration has received increasing research interest in recent years. In this paper we study the transient dynamic characteristics of a piezoelectric energy harvesting system including a piezoelectric energy harvester, a bridge rectifier, and a storage capacitor. To accomplish this, this energy harvesting system is modeled, and the charging process of the storage capacitor is investigated by employing the in-phase assumption The results indicate that the charging voltage across the storage capacitor and the gathered power increase gradually as the charging process proceeds, whereas the charging rate slows down over time as the charging voltage approaches to the peak value of the piezoelectric voltage across the piezoelectric materials. In addition, due to the added electrical damping and the change of the system natural frequency when the charging process is initiated, a sudden drop in the vibration amplitude is observed, which in turn affects the charging rate. However, the vibration amplitude begins to increase as the charging process continues, which is caused by the decrease in the electrical damping （i.e., the decrease in the energy removed from the mechanical vibration）. This electromechanical coupling characteristic is also revealed by the variation of the vibration amplitude with the charging voltage.     

Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator

Vibration energy harvesting research has largely focused on linear electromechanical devices excited at resonance. Considering that most realistic vibration environments are more accurately described as either stochastic, multi-frequency, time varying, or some combination thereof, narrowband linear systems are fated to be highly inefficient under these conditions. Nonlinear systems, on the other hand, are capable of responding over a broad frequency range; suggesting an intrinsic suitability for efficient performance in realistic vibration environments. Since a number of nonlinear dynamical responses emerge from dissipative systems undergoing a homoclinic saddle-point bifurcation, we validate this concept with a bistable inertial oscillator comprised of permanent magnets and a piezoelectric cantilever beam. The system is analytically modeled, numerically simulated, and experimentally realized to demonstrate enhanced capabilities and new challenges. In addition, a bifurcation parameter within the design is examined as either a fixed or an adaptable tuning mechanism for enhanced sensitivity to ambient excitation.     

Snap-through piezoelectric energy harvesting

Snap-through mechanism is employed to harvest electricity from random vibration through piezoelectricity. The random excitation is assumed to be Gaussian white noise. The snap-through piezoelectric energy harvester possesses the bistability. For small-amplitude vibration in a potential well, the Ito stochastic differential equation of the electromechanical coupling system is derived from the Taylor approximation at a stable equilibrium point. The method of the moment differential equations is applied to determine the statistical moments of the displacement response and the output voltage. The effects of the system parameters on the output voltage and the output power are examined. The approximate analytical outcomes are qualitatively and quantitatively supported by the numerical simulations. For large-amplitude interwell motion, the effects of the parameters on the output voltage and the output power are numerically investigated. Nonlinearity produced by the snap-through improves energy harvesting so that the snap-through piezoelectric energy harvester can outperform the linear energy harvester in the similar size under Gaussian white noise excitations.     

随机激励下双稳态压电俘能系统的相干共振及实验验证

随着压电晶体材料的迅速发展, 基于压电效应的能量采集系统是俘获环境中的宽带随机振动能量的一种有效途径. 研究了有限宽带随机激励作用下, 磁斥力双稳态压电俘能系统的相干共振俘能机理, 并进行了实验验证. 运用Euler-Maruyama方法求解了随机非线性压电振动耦合方程, 比较分析了相干共振发生前后系统的动力学特性和俘能效率, 然后基于Kramers逃逸速率解释了相干共振. 最后的随机振动实验结果验证了双稳态压电俘能系统的相干共振俘能机理. 并且观察到: 当相干共振发生时, 系统会在两个势能阱之间剧烈运动, 此时宽带随机振动能量会被转化为大幅值窄带低频振动响应, 从而极大地提高了宽带随机振动能量的俘获效率.     

Output response identification in a multistable system for piezoelectric energy harvesting

In this paper we examine in detail the multiple responses of a novel vibrational energy harvester composed of a vertical bistable beam whose complex non-linear behavior is tuned via magnetic interaction. The beam was excited horizontally by a harmonic inertial force while mechanical vibrational energy is converted to electrical power through a piezoelectric element. The bistable laminate beam coupled to the piezoelectric transducer showed a variety of complex responses in terms of the beam displacement and harvested power output. The range of vibration patterns in this non-linear system included single-well oscillations and snap-through vibrations of periodic and chaotic character. Harvested power was found to be strongly dependent on the vibration pattern with nonlinearities providing a broadband response for energy harvesting. Wavelet analysis of measured voltage, displacement and velocity time histories indicated the presence of a variety of nonlinear periodic and also chaotic phenomena. To measure the complexity of response time series we applied phase portraits and determine stroboscopic points and multiscale entropy. It is demonstrated that by changing parameters such as the magnetic interaction, the characteristics of the bistable laminate harvester, such as the natural frequency, bandwidth, vibration response and peak power can be readily tailored for harvesting applications.     

An investigation into the simultaneous use of a resonator as an energy harvester and a vibration absorber

A mass–spring–damper system is at the core of both a vibration absorber and a harvester of energy from ambient vibrations. If such a device is attached to a structure that has a high impedance, then it will have very little effect on the vibrations of the structure, but it can be used to convert mechanical vibrations into electrical energy (act as an energy harvester). However, if the same device is attached to a structure that has a relatively low impedance, then the device may attenuate the vibrations as it may act as both a vibration absorber and an energy harvester simultaneously. In this paper such a device is discussed. Two situations are considered; the first is when the structure is excited with broadband random excitation and the second is when the structure is excited by a single frequency. The optimum parameters of the device for both energy harvesting and vibration attenuation are discussed for these two cases. For random excitation it is found that if the device is optimized for vibration suppression, then this is also adequate for maximizing the energy absorbed (harvested), and thus a single device can effectively suppress vibration and harvest energy at the same time. For single frequency excitation this is found not to be the case. To maximize the energy harvested, the natural frequency of the system (host structure and absorber) has to coincide with the forcing frequency, but to minimize vibration of the host structure, the natural frequency of the absorber has to coincide with the forcing frequency. In this case, therefore, a single resonator cannot effectively suppress vibration and harvest energy at the same time.     

Theoretical investigations of energy harvesting efficiency from structural vibrations using piezoelectric and electromagnetic oscillators

Conversion of ambient vibrational energy into electric power has been the impetus of much modern research. The traditional analysis has focused on absolute electrical power output from the harvesting devices and efficiency defined as the convertibility of an infinite resource of vibration excitation into power. This perspective has limited extensibility when applying resonant harvesters to host resonant structures when the inertial influence of the harvester is more significant. Instead, this work pursues a fundamental understanding of the coupled dynamics of a main mass-spring-damper system to which an electromagnetic or piezoelectric mass-spring-damper is attached. The governing equations are derived, a metric of efficiency is presented, and analysis is undertaken. It is found that electromagnetic energy harvesting efficiency and maximum power output is limited by the strength of the coupling such that no split system resonances are induced for a given mass ratio. For piezoelectric harvesters, only the coupling strength and certain design requirements dictate maximum power and efficiency achievable. Since the harvesting circuitry must "follow" the split resonances as the piezoelectric harvesters become more massive, the optimum design of piezoelectric harvesters appears to be more involved than for electromagnetic devices.     

Sustained high-frequency energy harvesting through a strongly nonlinear electromechanical system under single and repeated impulsive excitations

This work investigates a vibration-based energy harvesting system composed of two oscillators coupled with essential (nonlinearizable) stiffness nonlinearity and subject to impulsive loading of the mechanical component. The oscillators in the system consist of one grounded, weakly damped linear oscillator mass (primary system), which is coupled to a second light-weight, weakly damped oscillating mass attachment (the harvesting element) through a piezoelastic cable. Due to geometric/kinematic mechanical effects the piezoelastic cable generates a nonlinearizable cubic stiffness nonlinearity, whereas electromechanical coupling simply sees a resistive load. Under single and repeated impulsive inputs the transient damped dynamics of this system exhibit transient resonance captures (TRCs) causing high-frequency ‘bursts’ or instabilities in the response of the harvesting element. In turn, these high-frequency dynamic instabilities result in strong and sustained energy transfers from the directly excited primary system to the lightweight harvester, which, through the piezoelastic element, are harvested by the electrical component of the system or, in the present case, dissipated across a resistive element in the circuit. The primary goal of this work is to demonstrate the efficacy of employing this type of high-frequency dynamic instability to achieve enhanced nonlinear vibration energy harvesting under impulsive excitations.     

Vibration confinement and energy harvesting in flexible structures using collocated absorbers and piezoelectric devices

We propose an optimal design for supplementing flexible structures with a set of absorbers and piezoelectric devices for vibration confinement and energy harvesting. We assume that the original structure is sensitive to vibrations and that the absorbers are the elements where the vibration energy is confined and then harvested by means of piezoelectric devices. The design of the additional mechanical and electrical components is formulated as a dynamic optimization problem in which the objective function is the total energy of the uncontrolled structure. The locations, masses, stiffnesses, and damping coefficients of these absorbers and capacitances, load resistances, and electromechanical coupling coefficients are optimized to minimize the total energy of the structure. We use the Galerkin procedure to discretize the equations of motion that describe the coupled dynamics of the flexible structure and the added absorbers and harvesting devices. We develop a numerical code that determines the unknown parameters of a pre-specified set of absorbers and harvesting components. We input a set of initial values for these parameters, and the code updates them while minimizing the total energy in the uncontrolled structure. To illustrate the proposed design, we consider a simply supported beam with harmonic external excitations. Here, we consider two possible configurations for each of the additional piezoelectric devices, either embedded between the structure and the absorbers or between the ground and absorbers. We present simulations of the harvested power and associated voltage for each pair of collocated absorber and piezoelectric device. The simulated responses of the beam show that its energy is confined and harvested simultaneously.     

非线性磁式压电振动能量采集系统建模与分析

为便于评价、优化磁式压电振动能量采集系统的性能,系统研究了该类系统的建模与分析方法,建立了非线性的分布参数模型用于描述系统的非线性动力学行为,并采用谐波平衡法给出了谐波响应的解析解.随后利用仿真模型分析了磁铁间距、加速度幅值、负载阻抗对输出功率的影响,比较了不同激励频率和加速度幅值下的最优阻抗.结果表明:双稳态特性适用于低强度的振动环境,且愈接近临界区域,输出功率愈高,而单稳态渐硬特性适用于高强度振动环境,其最优间距并不靠近临界区域;阱间大幅运动和阱内小幅运动均存在高低能量态共存的现象,愈接近临界区域,现象愈明显;激振频率是影响最优负载阻抗的决定性因素.     

Damping as a result of piezoelectric energy harvesting

Systems that harvest or scavenge energy from their environments are of considerable interest for use in remote power supplies. A class of such systems exploits the motion or deformation associated with vibration, converting the mechanical energy to electrical, and storing it for later use; some of these systems use piezoelectric materials for the direct conversion of strain energy to electrical energy. The removal of mechanical energy from a vibrating structure necessarily results in damping. This research addresses the damping associated with a piezoelectric energy harvesting system that consists of a full-bridge rectifier, a filter capacitor, a switching DC–DC step-down converter, and a battery. Under conditions of harmonic forcing, the effective modal loss factor depends on: (1) the electromechanical coupling coefficient of the piezoelectric system; and (2) the ratio of the rectifier output voltage during operation to its maximum open-circuit value. When the DC–DC converter is maximizing power flow to the battery, this voltage ratio is very nearly 1/2, and the loss factor depends only on the coupling coefficient. Experiments on a base-driven piezoelectric cantilever, having a system coupling coefficient of 26%, yielded an effective loss factor for the fundamental vibration mode of 2.2%, in excellent agreement with theory.     

Broadband energy harvesting via magnetic coupling between two movable magnets

Harvesting energy from ambient mechanical vibrations by the piezoelectric effect has been proposed for powering microelectromechanical systems and replacing batteries that have a finite life span. A conventional piezoelectric energy harvester （PEH） is usually designed as a linear resonator, and suffers from a narrow operating bandwidth. To achieve broadband energy harvesting, in this paper we introduce a concept and describe the realization of a novel nonlinear PEH. The proposed PEH consists of a primary piezoelectric cantilever beam coupled to an auxiliary piezoelectric cantilever beam through two movable magnets. For predicting the nonlinear response from the proposed PEH, lumped parameter models are established for the two beams. Both simulation and experiment reveal that for the primary beam, the introduction of magnetic coupling can expand the operating bandwidth as well as improve the output voltage. For the auxiliary beam, the magnitude of the output voltage is slightly reduced, but additional output is observed at off-resonance frequencies. Therefore, broadband energy harvesting can be obtained from both the primary beam and the auxiliary beam.     

Designing and manufacturing a piezoelectric tile for harvesting energy from footsteps

The objective of this research is to design a piezoelectric tile for harvesting energy from footsteps and to optimize the system for harvesting maximum energy. Because piezoelectric modules easily break when directly subjected to energy generated by human movements, we designed a tile that employs indirect energy transmission using springs and a tip mass. We aimed at matching the mechanical resonance frequency of the tile with that of the piezoelectric modules. The resonance frequency of a piezoelectric module with a 10-g tip mass was almost similar to the vibration frequency of the tile at 22.5 Hz when we dropped an 80-g steel ball from a 1-m height. We performed impedance matching and realized a matching value of 15 kΩ. Under these optimal mechanical and electrical conditions, we harvested 770-μW RMS and 55-mW peak output power.     

界面羟基对碳纳米管摩擦行为和能量耗散的影响

本文采用分子动力学模拟研究了羟基对碳纳米管摩擦和能量耗散方式的影响.研究结果表明:由于界面间氢键的形成,碳纳米管所受的平均摩擦力明显增大;随着羟基比例的改变,界面间氢键的数量与摩擦力的变化趋势一致;碳纳米管的手性角对摩擦力有一定的影响,扶手椅型碳纳米管所受的摩擦力比其他类型的碳纳米管的大;直径对摩擦力的影响较大,直径越大界面间的摩擦力越大,其原因是大直径的碳纳米管底部变平导致界面接触面积增大;界面接枝羟基后,体系的声子态密度中出现羟基的振动峰;随羟基比例的增加,羟基的振动在能量耗散中起到更为重要的作用,当碳纳米管和硅基底的羟基比例为10%/20%时,体系能量耗散的主要途径由碳纳米管和硅基底的振动转变为羟基的振动.