Adsorption and reduction reactions of anthraquinone derivatives on gold electrodes studied with electrochemical surface‐enhanced Raman spectroscopy

Electrochemical surface‐enhanced Raman spectroscopy (EC‐SERS), combined with cyclic voltammetry, and the density functional theoretical (DFT) method were used to investigate self‐assembled monolayer (SAM) adsorption and reduction processes. Here, we choose the system of interest, being thiolacetyl‐terminated 2‐phenylene ethynylene‐substituted anthraquinone molecule (2‐AQ) on gold electrodes in buffered aqueous and aprotic solutions. In the buffered aqueous solution, the results of cyclic voltammetry and EC‐SERS measurements, as well as DFT calculations, indicate that the adsorbed molecules pass through a two‐electron two‐proton reduction reaction with cathodic polarization. In particular, the latter two methods confirmed the structural changes of SAMs during the process of redox reaction, 2‐AQ + 2e + 2H⁺ → 2‐AQH₂, where 2‐AQ and 2‐AQH₂ are the oxidized and reduced forms, respectively. In aprotic solutions (acetonitile), a stepwise reaction mechanism was proposed on the basis of the results of EC‐SERS and DFT calculations. The first reduction peak should be a half reaction process 2‐AQ + e → 2‐AQ⁻, where 2‐AQ⁻ is a single electron reduced form. Compared with that of 2‐AQ SAMs in the buffered aqueous solution, the results of EC‐SERS and DFT calculations in aprotic solution suggested that the solvent effect significantly influences the redox process of 2‐AQ in electrochemical interfaces. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation and study of complex self-assembled film as a super-thin barrier on silver

A self-assembled monolayers (SAMs) of (3-mercaptopropy) trimethoxysilane (3-MPT) chemisorbed on silver surface was chemically modified by 1-octadecanethiol (C₁₈H₃₇SH) (to form self-assembled mixed-monolayer (SAMM)) and the co-polymer of N-vinylcarbazole and methyl methacrylate ester to form complex self-assemblied film (CSAF). The combinative state of interface between SAMs (or SAMM) and co-polymer were characterized by dynamic mechanical thermal analysis (DMTA). The thickness of film on Ag was characterized by X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) measurements in 10% NaOH aqueous solution with the silver surface and covered with film indicated that 3-MPT SAMs modified with C₁₈H₃₇SH and then with co-polymer have higher capability against oxidation.     

Photopatterning of gold and copper surfaces by using self-assembled monolayers

A photolithographic technique was successfully employed to generate micropatterns of gold and copper by using self-assembled monolayer (SAMs) as resist materials. Copper patterns were successfully prepared from SAMs of 11-mercaptoundecanoic acid (MUA) and dodecanethiol (DDT) on Cu after UV irradiation followed by etching but gold patterns were prepared only from the SAM of MUA and not from the SAM of DDT, which revealed the difference of photooxidation of the metal–sulfur bond on SAMs. However, the maximum resolution of the pattern was about 1.0 μm on gold and 5.0 μm on copper. This may be due to lower quality packing of SAM on copper than gold. Ellipsometric and cyclovoltammetric observation of SAMs during the UV irradiation indicated the gradual removal of SAMs on copper and gold. Photopatterning of gold and copper by using SAM is more compatible with the current microelectronics process and is complementary to the microcontact printing technique.     

RA-IR Studies on the Structure of Mercapto-Ended Azobenzene Derivatives in Self-Assembled Monolayers

Self-Assembled Monolayers (SAMs) were prepared from mercapto-ended azobenzene derivatives with the structure of n-C_nH_2n+1, AzoO(CH₂)_mSH (n=4,6,8,10,12; m=3,5). the structure of these SAMs was thoroughly studied with grazing-angle incident reflection absorption FT1R technique and wettability measurement. the results suggested that the plane of Azobenzene system of the assembling molecules in the SAMs lies on its back with an approximate angle of 22° included between the substrate surface normal and the Azobenzene plane. Tail alkyl groups (n-C_nH_2n+1) in these assembling molecules were considered to be in an all-trans conformation, as if they were in a crystalline-like environment. and the C-C-C plane of these all-trans tail alkyl groups, while n≤8, lies also on its back with an angle about 70° between its plane and the substrate surface normal. the conformation of these head groups (-O(CH₂)_mSH) in SAMs are disturbed by many structural factors. While m=3 or 5, the head group chain was proposed to remain in a gauche conformation to fit the upright orientation of the Azobenzene plane. the packing density was investigated by measuring the contact angle of water on these SAMs. the results showed that the self-assembled monolayer films are perfectly packed and the coverage density might be improved with increasing the length of both tail and head alkyl chains.     

Localized grafting through chemical lift-off

In this work we present two techniques that provide localized functionalization of the surface of materials. Both lead to localized grafted thin organic films (10-200 nm). The localization is brought by a chemical lift-off process, which relies on patterned weakly bonded films as sacrificial layers, combined with electrochemical (SEEP) or chemical (GraftFast©) processes which provides the final robust pattern on the surface. Both grafting processes, which were recently described, take advantage of the redox activation of diazonium salts associated with vinylic monomers in aqueous solution, and lead to similar grafted polymer films. Thanks to the high difference in adhesion between the grafted polymer and the patterned sacrificial layer (either an ink or weakly bound self-assembled monolayers), the latter may be easily removed, which unveils uncovered areas of the substrate.     

Preparation and characterization of patterned copper sulfide thin films on n-type TiO2 film surfaces

Micro-arrayed patterns of p-type copper sulfide (Cu_xS) thin films with positive and negative features were deposited onto the surfaces of n-type TiO₂ semiconductor films via a selective nucleation and growth process from aqueous solution. The surface functional molecules of the UV photo-oxidised patterned SAMs were utilized to direct the nucleation and growth of Cu_xS crystallites. The resultant Cu_xS/TiO₂ composite films with negative and positive Cu_xS patterns on the TiO₂ film surface were investigated using SEM, XRD, XPS and a 3D Surface Profiler. It is demonstrated that regular and compact patterned films of Cu₂S crystallites had been deposited onto the n-type TiO₂ surface, with sharp edges demarcating the boundaries between the patterned Cu₂S region and the TiO₂ film region. The UV-vis spectra for three Cu₂S/TiO₂ films exhibit a wide absorption between 300 nm and 450 nm. The maximum wavelength differences in the spectra of Cu₂S/TiO₂ films and TiO₂ film were attributed to the added absorption of Cu₂S films at 302 nm and the unchanged adsorption of TiO₂ films. The absorption intensities of the Cu₂S/TiO₂ films could be varied in the UV-vis range using the Cu₂S patterned features (positive, negative).     

Molecular simulation studies of self-assembled monolayers of alkanethiols on Au(111)

A review is presented of this group's recent molecular simulation studies of self-assembled monolayers (SAMs) of alkanethiols on Au(111) surfaces. SAMs are very useful for the systematic alteration of the chemical and structural properties of a surface by varying chain length, tail group and composition. The scientific and technological importance of SAMs cannot be overestimated. The present work has been centred on studies of atomic scale surface properties of SAMs. First, configurational-bias Monte Carlo simulations were performed in both semigrand canonical and canonical ensembles to investigate the preferential adsorption and phase behaviour of mixed SAMs on Au(111) surfaces. Second, a novel hybrid molecular simulation technique was developed to simulate atomic force microscopy (AFM) over experimental timescales. The method combines a dynamic element model for the tip-cantilever system in AFM and a molecular dynamics relaxation approach for the sample. The hybrid simulation technique was applied to investigate atomic scale friction and adhesion properties of SAMs as a function of chain length. Third, dual-control-volume grand canonical molecular dynamics (DCV-GCMD) simulations were performed of transport diffusion of liquid water and methanol through a slit pore with both inner walls consisting of Au(111) surfaces covered by SAMs under a chemical potential gradient. Surface hydrophobicity was adjusted by varying the terminal group of CH₃ (hydrophobic) or OH (hydrophilic) of the SAMs. Finally, ab initio quantum chemical calculations were performed on both clusters and periodic systems of methylthiols on Au(111) surfaces. Based on the ab initio results, an accurate force field capable of predicting c(4×2) superlattice structures over a wide range of temepratures for alkanethiols on Au(111) was developed. The extension of current work is discussed briefly.     

Photothermally Responsive Inks for Inkjet‐Printing Secure Information

2D patterns of photothermally responsive near‐infrared (NIR) absorbing gold nanostars (GNS), coated with multiple charged polymer layers, are inkjet‐printed on a glass surface. The shape of the localized surface plasmon resonance (LSPR) NIR absorption bands in the printed patterns loses its peaked form due to plasmon coupling, unless GNS are enveloped in multiple coating layers, keeping the inter‐GNS distance sufficiently large. In the latter case, the photothermal temperature increase (ΔT) induced by the NIR laser irradiation follows a ΔT versus irradiation wavelength (λ_irr) profile with the same sharply peaked shape of the LSPR bands of the liquid ink. With this result, a new paradigm for inkjet‐writing secure information is introduced, as an alternative to the current methods based on direct visual inspection of printed patterns. While the printed ink patterns of GNS with different coatings are visually indistinguishable despite their different NIR absorption spectrum, their photothermal response changes dramatically with λ_irr. This allows either to write and read simple information using a single λ_irr (YES answer for ΔT > threshold) or to use multiple λ_irr to write and read complex information like thermal bar codes and anti‐counterfeit signatures.     

Control of surface properties of self-assembled monolayers by tuning the degree of molecular asymmetry

We have studied self-assembled monolayers (SAMs) of asymmetric dialkyldisulfide derivatives of the form CH₃-(CH₂)_11+m-S-S-(CH₂)₁₁-OH with m = −4, −3, 0, +2 and +4 on gold. Sub-nanoscale changes in the length of the CH₃-terminated alkylchain have been used to selectively protrude one particular end group in the resulting film. The alteration of the chain length in only two methylene units already results in changes of surface properties, which have been detected with local (chemical force microscopy) and macroscopic (contact angle) techniques. In particular, advancing contact angles can be adjusted between 40° and 80°. The adhesion between a hydrophobic tip and these SAMs in water is determined by the chemical nature of the protruding end group. Chemical force microscopy, X-ray photoelectron spectroscopy and infrared reflection absorption spectroscopy have shown that these SAMs are composed of mixed, well-packed CH₃- and OH-alkylthiolate branches. The surface composition ratio is close to 1:1 for all investigated SAMs.     

Nanopatterned surface with adjustable area coverage and feature size fabricated by photocatalysis

We report an effective approach to fabricate nanopatterns of alkylsilane self-assembly monolayers (SAMs) with desirable coverage and feature size by gradient photocatalysis in TiO₂ aqueous suspension. Growth and photocatalytic degradation of octadecyltrichlorosilane (OTS) were combined to fabricate adjustable monolayered nanopatterns on mica sheet in this work. Systematic atomic force microscopy (AFM) analysis showed that OTS-SAMs that have similar area coverage with different feature sizes and similar feature size with different area coverages can be fabricated by this approach. Contact angle measurement was applied to confirm the gradually varied nanopatterns contributed to the gradient of UV light illumination. Since this approach is feasible for various organic SAMs and substrates, a versatile method was presented to prepare tunable nanopatterns with desirable area coverage and feature size in many applications, such as molecular and biomolecular recognition, sensor and electrode modification.     

Formation and characterization of long-chained alkylsiloxane self-assembled monolayers on atomic-layer-deposited aluminum oxide surfaces

We report the formation of highly robust long-chained alkylsiloxane self-assembled monolayers (SAMs) on aluminum oxide films prepared by atomic-layer deposition (ALD). The surface chemistry and the morphological characteristics of the SAMs were examined by X-ray photoelectron spectroscopy, infrared spectroscopy, atomic-force microscopy, and contact-angle goniometry. The octadecylsiloxane-derived SAMs initially hydrolyze and deposit on the alumina surface as ∼1.8 nm thick, monolayer-high islands ≤50 nm in diameter. The size of these islands increases with time, likely through a surface-diffusion aggregation process. Coalescence of neighboring islands leads to a densely packed and robust monolayer on the alumina surface. The SAMs on ALD alumina are expected to be useful in a number of nanostructure applications where the combination of conformal alumina deposition and conformal coverage of the alumina by an organic layer is critical. PACS 81.16.Dn; 81.65.Kn; 82.45.Mp; 81.65.-b     

Thermal stability of thiol and silane monolayers: A comparative study

The stability of self-assembled monolayers (SAMs) at elevated temperatures is of considerable technological importance. The thermal stability of 1-octadecanethiol (ODT), 16-mercaptohexadecanoic acid (MHDA) and 1H,1H,2H,2H-perfluorodecanethiol (PFDT) SAMs on gold surfaces, and of 4-aminobutyltriethoxysilane (ABTES) and 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (PFDS) assembled on hydroxylated silicon surfaces, was studied by X-ray photoelectron spectroscopy (XPS). The samples were heated in ultrahigh vacuum to temperatures in excess of that required for SAM degradation. ODT monolayers were stable to ca. 110 °C, while MHDA and PFDT SAMs were stable to ca. 145 °C. ABTES SAMs were found to be indefinitely stable to 250 °C, while PFDS SAMs were stable to 350 °C. These studies demonstrate the advantages of using silane monolayers for moderate to high temperature applications and illustrate differences that arise due to the nature of the tail group. To demonstrate the feasibility of silanes for template-directed patterning, a hydroxylated silicon oxide surface containing microcontact-printed PFDS patterns was spin-coated with a mainly hydrophilic block copolymer. Annealing the surface at 90 °C for 2 h caused the block copolymer to dewet the hydrophobic PFDS-patterned regions and adsorb exclusively on the unpatterned regions of the surface.     

Self-assembled monolayer and multilayer formation using redox-active Ru complex with phosphonic acids on silicon oxide surface

The formation of self-assembled monolayer and multilayer using redox-active Ru complex molecules with phosphonic acids on SiO₂ surface has been examined using X-ray photoelectron spectroscopy (XPS), ellipsometry, and time of flight secondary mass-ion spectroscopy (TOF-SIMS). We found that an introduction of a Zr adlayer leads to higher surface molecular density of Ru complex SAMs on the SiO₂ surface, compared to that of obtained from the direct adsorption of Ru complex monolayer on the SiO₂ surface. We further tried to fabricate a multilayer film using this molecule with Zr(IV) ion acting as a chemical glue by a successive immersion process. The XPS data revealed that the molecular densities of the multilayers were also higher for the immobilization with Zr adlayer between Ru complex and SiO₂ surface than those without the Zr adlayer, suggesting that Zr adlayer is effective in forming highly packed molecular layer of phosphonic acids on SiO₂ surface. We found the film growth reached a saturation point after 6 layers on the SiO₂ surface. The film growth saturation can be explained by a molecular domain boundary effect encountered due to the large tilt angle of the molecular layer.     

Molecular self-assembly and passivation of GaAs (0 0 1) with alkanethiol monolayers: A view towards bio-functionalization

Properties of as prepared or nanoengineered III-V semiconductor surfaces provide attractive means for photonic detection of different adsorbants from surrounding gaseous or liquid environments. To be practical, this approach requires that the surface is made selectively sensitive (functionalized) to targeted species. In addition, such surface has also to stay stable over extended period of time to make it available for rapid testing. Numerous reports demonstrate attractive properties of GaAs for sensing applications. One of the most fundamental issues relevant to these applications concerns the ability to functionalize chemically, or biologically, the surface of GaAs. The most studied method of GaAs surface functionalization is based on formation of self-assembled monolayers (SAMs) of various n-alkanethiols, HS-(CH₂)_n-T (T = CH₃, COOH, NH₂, etc.). In spite of multi-year research concerning this issue, it has only been recently that a comprehensive picture of SAMs formation on GaAs and an understanding of the natural limitation of the SAM-GaAs interface in some bio-chemical sensing architectures has begun to emerge.     

Calculated photoelectron angular distributions of ω-(n-pyrrolyl)alkanethiol self-assembled monolayers for distinguishing between different arrangements of the pyrrole groups

Photoelectron angular distributions from ω-(n-pyrrolyl)alkanethiol self-assembled monolayers (SAMs) were calculated within a single-scattering approximation of the photoemission process. The calculations were carried out on two different surface structures with face-stacked and herringbone arrangements of the pyrrole groups, which were deduced from molecular dynamics calculations. The characteristic angular patterns calculated for the molecular orbital originating from the pyrrole group involve information on the orientations of the pyrrole groups, which allows distinction between these arrangements. The photoelectron angular distributions from substituted SAMs can be used as a clue for studying the surface structures of the substituent groups.     

Interfacial kinetic enhancement of metal ion adsorption on binary mixed self-assembled monolayers

The adsorption of metal ions, a type of surface reaction on binary mixed self-assembled monolayers (SAMs) on a gold surface composed of 1,6-hexanedithiol (HDT) with 11-mercaptoundecanoic acid (MUA), was monitored by in situ surface plasmon resonance (SPR) measurements. The differential SPR reflectance (ΔR) enables the kinetics of adsorption of Pt²⁺ on the mixed SAMs to be investigated. Unlike single HDT SAM, kinetic analyses of the mixed SAMs showed that the rate of adsorption of Pt²⁺ was enhanced and that it was highly dependent on the fraction of MUA present. These SPR measurements suggest that the adsorption rate of metal ions can be readily manipulated simply by using mixed SAMs.     

Peptide-induced patterning of gold nanoparticle thin films

In this work, the use of patterned proteins and peptides for the deposition of gold nanoparticles on several substrates with different surface chemistries is presented. The patterned biomolecule on the surface acts as a catalyst to precipitate gold nanoparticles from a precursor solution of HAuCl₄ onto the substrate. The peptide patterning on the surfaces was accomplished by physical adsorption or covalent attachment. It was shown that by using covalent attachment with a linker molecule, the influence of the surface properties from the different substrates on the biomolecule adsorption and subsequent nanoparticle deposition could be avoided. By adjusting the reaction conditions such as pH or HAuCl₄ concentration, the sizes and morphologies of deposited gold nanoparticle agglomerates could be controlled. Two biomolecules were used for this experiment, 3XFLAG peptide and bovine serum albumin (BSA). A micro-transfer molding technique was used to pattern the peptides on the substrates, in which a pre-patterned poly(dimethylsiloxane) (PDMS) mold was used to deposit a lift-off pattern of polypropylmethacrylate (PPMA) on the various substrates. The proteins were either physically adsorbed or covalently attached to the substrates, and an aqueous HAuCl₄ solution was applied on the substrates with the protein micropatterns, causing the precipitation of gold nanoparticles onto the patterns. SEM, AFM, and Electron Beam Induced Current (EBIC) were used for characterization.     

A promising approach to conductive patterns with high efficiency for flexible electronics

A promising approach for conductive patterns with high efficiency for flexible electronics was developed by direct-writing, silver(I) solution (silver nitrate, acetate silver, etc.) with no solid particles as a conductive ink, conductive pen as a writing implement, and polyimide (PI) film as a substrate. The physical properties of the conductive ink were investigated by a dynamic contact angle system, ubbelohde viscometer and surface tension instrument. Conductive properties of silver ink film were investigated by 4-point probe, scanning electron microscope (SEM) and surface profilometer. It is demonstrated how the design of solvent composition in conductive ink affects surface morphology, and conductivity of silver ink films. It can be obtained that conductive patterns drawn on PI substrate not only have good mechanical/electrical fatigue properties, but also have low resistivity. Especially, when the sintering condition is 200 °C for 60 min, the resistivity can be down to 6.6 μΩ cm, 4.25 times the silver bulk resistivity.     

Low temperature selective epitaxial growth of SiGe layers using various dielectric mask patterns and process conditions

The SiGe film was deposited at a low temperature of 675-725 °C with various dielectric mask patterns and process conditions using reduced pressure chemical vapor deposition. Pattern shape and process conditions associated with the growth rate and the Ge composition of the selective epitaxial growth (SEG) have been examined for the SiH₄-GeH₄-H₂ system. The objective was to understand the effect of pattern size at low temperature for the feasible device applications. The growth rates showed large non-uniformity of 1.4 depending upon the window width, 2-100 μm, of dielectric mask patterns. From the influence of the pattern shape/size and process parameters, the evolution of growth rates could be explained by the surface migration and the surface topology as well. After the surface migration control appearing dominantly at the initial stage, the surface topology became significant at the last part of the SEG process. The Ge composition is important to form the high quality SEG of SiGe films, so that it is important to optimize the flow rate of SiH₄, GeH₄, and total source gas.     

Growth kinetics of self-assembled monolayers of thiophene and terthiophene on Au(111): An infrared spectroscopic study

The growth kinetics of self-assembled monolayers (SAMs) of thiophene compounds on Au(111) surfaces was revealed by Fourier-transform infrared reflection absorption spectroscopy (FT-IR-RAS). Thiophene and terthiophene form well-ordered SAMs on Au(111) surfaces by immersing gold substrates into their ethanol solutions for ca. 15 h. Gibbs free energies for the adsorption processes of thiophene and terthiophene were found to be identical. However, the growth and molecular orientation of SAMs are different between two thiophene compounds. Terthiophene in SAMs orients parallel to the surface. The SAM growth of terthiophene obeys a time-dependent Langmuir scheme. On the other hand, the thiophene SAM undergoes a two-step growth process with unique molecular orientations. In the primary phase, thiophene assumes a parallel orientation on the Au(111) surface. In the second phase, thiophene is oriented close to the normal of the surface. The different growth process between thiophene and terthiophene is attributable to the topology of sulfur positions in the molecules. Received 23 May 2001 and Received in final form 11 February 2002