极化时间对含疏基席夫碱自组装膜的影响

交流阻抗;极化时间对含疏基席夫碱自组装膜的影响     

银纳米修饰电极的制备及电化学行为

金属纳米粒子由于其小的体积和大的比表面积而具有独特的电子、光学和异相催化特性,是目前表面纳米工程及功能化纳米结构制备的一种理想研究对象[1]。银纳米粒子可广泛应用于催化剂材料、电池的电极材料、低温导热材料和导电材料等,成为近年来人们研究的热点[2,3]。在电化学方面,银纳米粒子具有比其他纳米粒子更为优异的导电性能和电催化性能。因此,研究银纳米粒子修饰电极有重要的应用价值和前景[4]。1实验部分1.1仪器CHI660电化学工作站(USA);TU-1901型双光束紫外可见分光光度计(北京普析通用仪器公司);KQ-100型超声清洗器(昆山市超声…     

Unmodified supported thiol/lipid bilayers: studies of structural disorder and conducting mechanism by cyclic voltammetry and AC impedance.

Supported thiol/lipid bilayer assembly, one of the most spectacular bilayer systems in recent years, has provided a good model to study biomembranes because of its high mechanical stability. In this work, the structural and conducting property of unmodified Au supported octadecanethiol/phosphatidylcholine bilayers were investigated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The forming process of bilayer was monitored by capacitance plane plot. The normalized membrane capacitance of supported bilayer is 0.52 microF cm(-2). Kinetically controlled voltammograms determined by Butler-Volmer equation were obtained for both thiol monolayer and thiol/lipid bilayer in linear sweep voltammetry. Results of EIS experiment indicate that collapsed sites and pinhole defects exist in thiol monolayer and lipid monolayer, respectively. The difference between the values of experimental and theoretical standard electron transfer rate constant indicates that the conducting mechanism of Au supported thiol monolayer is electron tunneling at collapsed sites. The conducting mechanism of Au supported thiol/lipid bilayer is attributed as the following: the electroactive species could diffuse through pinholes in the lipid monolayer and reach collapsed sites in thiol monolayer, where electron transfer occurs via a tunneling process. The fractional coverage of the lipid monolayer measure by EIS experiments is about 0.98 or higher.     

Liquid crystal-gold nanoparticle composite-modified indium tin oxide (ITO) substrates and their electrochemical characterisation

A simple efficient strategy for the simultaneous synthesis and anchoring of liquid crystal (LC)-stabilised gold nanoparticles (NPs) on indium tin oxide (ITO) substrate is described. A monolayer of 3-mercaptopropyltrimethoxy silane (MPS) compound was formed on ITO and quality of the monolayer was assessed using electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Gold NP preparation was carried out on this monolayer-modified substrate (and on bare ITO), in a single-step reaction, simply by drop-casting a solution containing an appropriate amount of chloroauric acid and a LC compound possessing a terminal amino group, on the MPS monolayer-modified substrate and heating (70degree) for 2-3 min.. The LC compound served as a reducing agent as well as a capping ligand. LC-capped NPs were chemically anchored onto the ITO substrate through bonding to thiol moiety of the MPS. The CV and EIS analysis of the MPS monolayer showed a complete blocking behaviour for the electron transfer across the electrode/electrolyte interface confirming the formation of a high-quality dense compact monolayer. On the other hand, upon immobilisation of LC-gold NP composite on self-assembled monolayer-modified ITO substrates, both CV and impedance studies showed a small current indicating the gold NP-mediated electron transfer, thus confirming the successful immobilisation of NPs.     

Cysteamine monolayer inducing the formation of platinum nanoclusters for methanol electrocatalytic oxidation

Platinum nanoclusters (Pt-NCs) were synthesized on the surface of a gold electrode that was modified with cysteamine to form a kind of self-assembled monolayer via in-situ cyclic voltammetry (CV). Scanning electron microscopy, electrochemical impedance spectroscopy, and CV were used to characterize the properties of the electrode. The Cys monolayer induces the aggregation of platinum nanoparticles due to electrostatic interaction between the positive amino groups of the cystein monolayer and the negative charge of the hexachloroplatinate ions and causes the formation of Pt-NCs on the surface of the electrode. The resulting electrode exhibits high elecrocatalytic activity towards the oxidation of methanol.     

Kinetic studies of underpotential deposition of antimony on Se-modified Au electrode

Atomic layers of antimony can be electrodeposited onto the Se monolayer covered Au electrode in the underpotential region. In this paper, the formation and dissolution kinetics of antimony monolayer on the Se monolayer covered Au electrode are investigated using cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Scanning-rate-dependent CV experiments reveal that the peak current of underpotential deposition (UPD) wave of antimony is not a linear function of the scanning rate, υ, but scales as υ ^2/3. Similar behavior is observed when the Antimony monolayer is stripped from the modified substrate. These results indicate the character of monolayer formation and dissolution by a two-dimensional nucleation and growth mechanism. Additionally, current density−time transient obtained through CA experiments also reveal that both the deposition and stripping of the antimony monolayer involve an instantaneous nucleation and two-dimensional growth process.     

Comparison Between a Charge Transfer Process and an Electrocatalytic Process in Cyclic Voltammetry and Cyclic Voltcoulommetry. Application to the Oxidation of Ferrocyanide at a Ferrocene‐Monolayer Modified Gold Electrode

Ferrocyanide oxidation catalyzed by a ferrocene‐alkylthiolate monolayer at gold electrodes has been investigated by using cyclic voltammetry (CV) and cyclic voltcoulommetry (CVC). The voltammetric current‐potential curves obtained present a stationary sigmoidal feature which points out to a very high rate constant for the chemical step, whereas the charge‐potential curves do not reach an stationary behavior in any case. Simple expressions are presented for the characterization of the CV and CVC curves under Nernstian conditions for the charge transfer step. From these expressions, a value for the chemical rate constant 2.5×10⁴ M^?1 s^?1 has been easily obtained from an anodic plateau of the CV curves or from the linear anodic region of the CVC curves.     

Study on Microcontamination of Silver onto p-Type Crystalline Silicon(111) from an Aqueous Solution Using Cyclic Voltammetry

The microcontamination process of silver onto p-type crystalline silicon(111) in a solution of 0.01 mol L⁻¹ AgNO₃ at room temperature was investigated by studying the anodic stripping behavior using cyclic voltammetry (CV). This paper shows that the rate of Ag deposition is rapid and that deposition is almost fully accomplished within 1 s. Calculating the surface coverage (Γ) for 1 s, 10 min, or 1 h immersion based on the CV curves demonstrated that the silver layer was only a monolayer.     

Schiff碱在金电极上的自组装膜

本文利用自组装技术 ,首次将带有巯基的Schiff碱自组装到Au电极的表面 ;并利用扫描电子的显微电镜 (SEM )直接证实了Schiff碱的成膜 ,用循环伏安和交流阻抗技术对其膜的致密性等进行了分析 ,证实由Schiff碱形成的膜虽较疏松 ,但对异相电子转移起到了一定的抑制作用 ,本工作为利用自组装膜的方法研究Schiff碱提供了必要的实验理论参考     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.     

Metal ion interaction with phosphorylated tyrosine analogue monolayers on gold

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.     

Electrochemical properties of mixed self-assembled monolayers on gold electrodes containing mercaptooctylhydroquinone and alkylthiols

Mixed self-assembled monolayers of 2-(mercaptooctyl)hydroquinone (QH2) and alkylthiols were formed on gold electrodes in EtOH and the redox process of the hydroquinone moiety of QH2 was characterized by cyclic voltammetry (CV) in 0.1 M H(2)SO(4). The monolayers were formed at a series of QH2:alkylthiol ratios and the QH2:alkylthiol ratio in solution was compared to the electrochemical response from QH2 in the obtained monolayer. Mixed monolayers of QH2 with hexylthiol, dodecylthiol, and octadecylthiol were studied. The length of the alkylthiol is crucial for the electrochemical response from QH2 in the monolayer. The total concentration of thiols during monolayer formation and incubation times were also studied and low concentrations of < 2.5 mM and long incubation times gave rise to lower peak separation, lower peak half widths in the CVs of the mixed monolayers, and lower background current. The stability of a pure QH2 monolayer and a 1:4 QH2:hexylthiol monolayer toward high potentials of up to 1.5 V versus Ag/AgCl was also studied and it was observed that the mixed monolayer is significantly more stable than the pure QH2 monolayer.     

硅表面含二茂铁基团自组装单分子膜制备及电流-电压关系测量

合成了一种头基为二茂铁基团的长链烯烃分子(Fc-CO-NH-(CH₂)₉-CH=CH₂) (FcUA)，并用红外、核磁、质谱等手段对其进行了表征。用微波引发将该化合物嫁接到平面硅的表面，并用X射线光电子能谱、反射红外光谱、原子力显微镜表征了这一过程。最后，通过循环伏安电化学法和电敏感原子力显微镜的导电模式对其进行电学性质测试。结果表明这层单分子膜可以提高硅片的介电常数。同时还观察到了一种不稳定的类似负微分电流现象。     

In situ electrodeposition of Pt nanoclusters on glassy carbon surface modified by monolayer choline film and their electrochemical applications

Pt nanoclusters attached to the monolayer choline (Ch) modified glassy carbon surface were successfully synthesized by use of in situ cyclic voltammetry (CV) method. Field emission scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical impedance spectroscopy (EIS) were used to characterize the properties of this modified electrode. It was demonstrated that Ch was immobilized onto the carbon surface forming a covalently planted Ch monolayer, which could induce the formation of Pt nanoclusters. The preliminary study found that the homogeneous nanostructured Pt/Ch film exhibited remarkable electrocatalytic activity towards the oxidation of methanol and nitrite.     

Effects of metal coating on self-assembled monolayers on gold. 2. Copper on an oligo(phenylene-ethynylene) monolayer

We report studies on the modifications induced by the evaporation of copper overlayers on a self-assembled monolayer (SAM) of the oligo(phenylene-ethynyl) dithiol, 1-thio-4-[4'-[(4'-thio)phenylethynyl]-1'-ethynyl]-benzene (TTPEB). These SAMs were characterized after deposition from a tetrahydrofuran solution on polycrystalline gold substrates and after copper evaporation and its subsequent removal by nitric acid. Monolayers were studied via cyclic voltammetry (CV), UV-vis multiwavelength ellipsometry, external reflectance infrared (IR) spectroscopy, and ion scattering spectroscopy (ISS). The results obtained indicate that TTPEB SAMs display the same packing characteristics before and after copper evaporation and removal. However, as shown by IR spectroscopy, the monolayers undergo a reorganization process that involves an increase in tilt angle accompanied by rotation of aromatic rings that results in a decrease in the average molecular twist angle. ISS data suggest that copper diffuses through the monolayer after copper evaporation, a result that is significant for applications of this molecule in molecular electronic devices.     

Surface plasmon resonance and electrochemistry characterization of layer-by-layer self-assembled DNA and Zr4+ thin films, and their interaction with cytochrome c

Through electrostatic layer-by-layer (LbL) assembly, negatively charged calf thymus double stranded DNA (CTds-DNA), and positively charged Zr⁴⁺ ions were alternately deposited on gold substrate modified with chemisorbed cysteamine. Thus-prepared three-dimensional DNA networks were characterized by surface plasmon resonance (SPR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and infrared reflection-absorption spectroscopy (IR-RAS). SPR spectroscopy indicates that the effective thickness of DNA monolayer in the (DNA/Zr⁴⁺)₁ bilayer was 1.5 ± 0.1 nm, which corresponds to the surface coverage of 79% of its full packed monolayer. At the same time, a linear increase of film thickness with increasing number of layers was also confirmed by SPR characterizations. The data of XPS and IR-RAS show that Zr⁴⁺ ions interact with both the phosphate groups and nitrogenous bases of DNA and load into the framework of DNA. Furthermore, the interactions between this composite film and heme protein cytochrome c (Cyt c) were investigated by SPR spectroscopy and electrochemistry. Compared with the adsorption of Cyt c on DNA monolayer, this composite multilayer film can obviously enhance the amount of immobilized Cyt c confirmed by SPR reflectivity-incident angle (R-θ) curves. Cyclic voltammetry (CV) indicates the Cyt c adsorbed on the composite film is electroactive, and the enhancement of peak current in CV indirectly verifies the increase of the amount of immobilized Cyt c.     

硅电极/溶液界面开路电位-时间谱和原子力显微镜在化学镀Ag中的应用研究

用开路电位-时间谱技术,表征了在硅（100）表面化学镀银的硅电极/溶液界 面吸附态。所得结果与原子力显微镜在纳米尺寸上的面结构信息分析结果作了对比 。同时也将该结果与循环伏安法（CV）结果作了比较。证明当硅电极表面具有单层 吸附Ag~+离子、表面单层吸附Ag~+离子发生沉积反应、Ag~+离子发生本体沉积时的 开路电位-时间曲线有完全不同的特征。     

Study of the Electrostatic Interaction of Lysine Monolayer on Glassy Carbon Electrodes Using the Electrochemical Method

A covalent modified glassy carbon electrode (GCE) with Lysine (Lys) has been fabricated via an electrochemical oxidation procedure. The electrostatic interaction of the monolayer has been investigated by cyclic voltammetry (CV) with Fe(CN)₆^3? redox probe in different concentrations of protons and different charged cations, respectively. The electrochemical method can be a new feasible method for the study of electrostatic interaction of the monolayer.     

Reaction of hydroquinone with hematite; I. Study of adsorption by electrochemical-scanning tunneling microscopy and X-ray photoelectron spectroscopy

The reaction of hematite with quinones and the quinone moieties of larger molecules may be an important factor in limiting the rate of reductive dissolution, especially by iron-reducing bacteria. Here, the electrochemical and physical properties of hydroquinone adsorbed on hematite surfaces at pH 2.5-3 were investigated with cyclic voltammetry (CV), electrochemical-scanning tunneling microscopy (EC-STM), and X-ray photoelectron spectroscopy (XPS). An oxidation peak for hydroquinone was observed in the CV experiments, as well as (photo)reduction of iron and decomposition of the solvent. The EC-STM results indicate that hydroquinone sometimes forms an ordered monolayer with approximately 1.1 QH(2)/nm(2), but can be fairly disordered (especially when viewed at larger scales). XPS results indicate that hydroquinone and benzoquinone are retained at the interface in increasing amounts as the reaction proceeds, but reduced iron is not observed. These results suggest that quinones do not adsorb by an inner-sphere complex where adsorbate-surface interactions determine the adsorbate surface structure, but rather in an outer-sphere complex where interactions among the adsorbate molecules dominate.     

Electrochemical Behavior of Uric Acid and Epinephrine at a Meso-2,3-Dimercaptosuccinic Acid Self-Assembled Gold Electrode

A self-assembled electrode with a meso-2,3-dimercaptosuccinic acid (DMSA) monolayer has been characterized by electrochemical quartz crystal microbalance and complex impedance analysis, surface enhanced Raman spectroscopy and cyclic voltammetry. The self-assembled electrode was used for the simultaneous electrochemical detection of epinephrine (EP) and uric acid (UA) in phosphate buffer of pH 7.7. The simultaneous oxidation of EP and UA was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), and the signals for each method were well separated with a potential difference of over 330 mV and without interference by each other. The detection limit of EP is 5.4 × 10⁻⁸ mol L⁻¹ by CV and 5.3 × 10⁻⁸ mol L⁻¹ by DPV and that of UA is 8.4 × 10⁻⁸ mol L⁻¹ by CV and 4.2 × 10⁻⁸ mol L⁻¹ by DPV. The DMSA self-assembled electrode can be applied to the simultaneous determination of EP and UA.