Novel fluorinated hybrid polymer preparation from silsesquioxanes by radical polyaddition

Radical polyaddition of bis(α-trifluoromethyl-β,β-difluorovinyl) terephthalate [CF₂C(CF₃)OCOC₆H₄COOC(CF₃)CF₂] (BFP) with silsesquioxanes was investigated in order to produce a polymer possessing silsesquioxane moiety in polymer main chain. 1,3,5,7,9,11,13,15-octakis(dimethylsilyloxy)pentacyclo[9.5.1.1^3,9.1^5,15.17,13]octasiloxane (T₈S) with BFP successfully afforded a polymer bearing a molecular weight of about 2.5×10⁵. The polymer obtained were soluble in usual organic solvent such as methanol, tetrahydrofuran and chloroform. In order to get some information on the polyaddition reaction mechanism, model reactions of 2-benzoxypentafluoropropene [CF₂C(CF₃)OCOC₆H₅] (BPFP) with dimethylphenylsilane, [(CH₃)₂SiHC₆H₅], BPFP with 1,1,3,3-tetramethyldisiloxane {[(CH₃)₂SiH]₂O}, and BFP with dimethylphenylsilane were carried out. The mechanism that the radical abstracts a hydrogen from silane compounds followed by the addition of perfluoroisopropenyl groups was proposed.     

Group 4 complexes derived from o-carborane: synthesis, structures and ethylene polymerization properties

Nine thermally stable complexes (η⁵-Cp*)[η⁵-(C₅H₄)CMe₂CB₁₀H₁₀CR]MCl₂ (R=H and Me) and (η⁵-Cp*)[η⁵; η¹-(C₅H₄)CMe₂(CB₁₀H₁₀C)]MCl have been prepared via metathesis reactions of Cp*MCl₃ (M=Ti, Zr and Hf, Cp*=pentamethylcyclopentadienyl) with monolithium salts of (C₅H₅)CMe₂(CB₁₀H₁₀CR) (R=H and Me) and with dilithium salt of (C₅H₅)CMe₂(CB₁₀H₁₀CH), respectively. These compounds have been fully characterized by various spectroscopic methods and elemental analyses. All of the compounds except (η⁵-Cp*)[η⁵-(C₅H₄)CMe₂CB₁₀H₁₀CMe]HfCl₂ were additionally characterized by a single crystal X-ray diffraction study, establishing their monomeric bent metallocene structural feature with carborane acting as a substituent or an ancillary ligand. The titanium and zirconium complexes produce high-density polyethylenes with the activity range of about 10³-10⁴ g PE per mol of M bar h in the presence of modified methylaluminoxane cocatalyst.     

Knoevenagel condensation of [NC-CH2C(O)-NH-CH(CO2Et)-S]2 with ferrocenecarbaldehyde and the activation of the σ(C-S) bond of [(η-C5H5)Fe{(η-C5H4)-CHC(CN)-C(O)-NH-CH(CO2Et)-CH2-S-}]2 induced by palladium(II)

The results obtained from the Knoevenagel condensation between the aldehydes R-CHO {with R=4-MeO-C₆H₄, 4-NO₂-C₆H₄, 4-Cl-C₆H₄, C₆H₅, 2,4,6-Me₃-C₆H₂ or (η⁵-C₅H₅)Fe(η⁵-C₅H₄)} and [NC-CH₂C(O)-NH-CH(CO₂Et)-S]₂ under different experimental conditions are reported. These studies have allowed the isolation and characterisation of three optically pure polyamides of general formula [R-CHC(CN)-C(O)-NH-CH(CO₂Et)-CH₂-S-]₂ with R=4-MeO-C₆H₄ (3a), 4-NO₂-C₆H₄ (3b) or (η⁵-C₅H₅)Fe(η⁵-C₅H₄) (3f). The reactions of 3f with Na₂[PdCl₄] or Pd(AcO)₂ are also studied. The treatment of Pd(AcO)₂ with 3f in a 2:1 molar ratio in refluxing toluene leads to the formation of [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CHC(CN)-C(O)-NH-C(CO₂Et)CH₂}] (5f). Electrochemical studies based on cyclic voltammetry of compounds 3f and 5f are also reported.     

Synthesis, characterization and catalytic activity of organolanthanide(II) complexes with heterocyclic-functionalized fluorenyl ligands

Two series of new organolanthanide(II) complexes with tetrahydro-2H-pyranyl- or N-piperidineethyl-functionalized fluorenyl ligands were synthesized via one-electron reductive elimination reaction. Treatments of [(Me₃Si)₂N]₃Ln^III(μ-Cl)Li(THF)₃ with 2 equiv. of C₅H₉OCH₂C₁₃H₉ (1) or C₅H₁₀NCH₂CH₂C₁₃H₉ (2), respectively, in toluene at about 80 °C produced, after workup, the corresponding organolanthanide(II) complexes with formula [η⁵:η¹-C₅H₉OCH₂C₁₃H₈]₂Ln^II (Ln = Yb (3), Ln = Eu (4)) and [η⁵:η¹-C₅H₁₀NCH₂CH₂C₁₃H₈]₂Ln^II (Ln = Yb (5), Ln = Eu (6)) in good yields. All the compounds were fully characterized by spectroscopic methods and elemental analyses. The structures of complexes 3, 4, and 6 were additionally determined by single-crystal X-ray analyses. It represents the first example of solvent-free organolanthanide(II) complexes with fluorenyl ligands. The catalytic properties of the organolanthanide(II) complexes on the polymerization of ε-caprolactone and methyl methacrylate have been studied. The temperatures, solvents and coordination effects on the catalytic activities of the complexes were examined.     

STUDY ON CATIONIC RING-OPENING POLYMERIZATION MECHANISM OF 3-ETHYL-3-HYDROXYMETHYL OXETANE

ABSTRACT

Cationic ring-opening polymerization of 3-ethyl-3-hydroxylmethyl oxetane was carried out using BF₃·O(C₂H₅)₂ as initiator, and a branched polyether was formed. Typical SEC curves show that the polymer consists of two fractions: one has higher molecular weight (11.7×10⁴～ 9.2×10⁴) and the other has lower molecular weight (3.8×10³～4.0×10³). This probably resulted from the chain-tran sfer reaction of two propagating polymer chains. The structure of the polyEHMO formed was characterized by ¹H and ¹³C NMR spectra. The degree of branching is mainly affected by the propagation mechanism. As the molar ratio of [I]₀/[EHMO]₀ in feed increased, the degree of branching also increased.     

Kinetics and Mechanism of the Reaction of Chloroplatinum(II) Complexes with Alkyl Radicals

The reaction between certain platinum(II) complexes and alky radicals produces an unstable organoplatinum(III) intermediate, {Pt^III -R}. The kinetics of this step were evaluated by laser flash photolysis with ABTS² (2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonate) ion) and TMPD (tetramethylphenylenediamine) as kinetic probes. The rate constants for PtCl₄^2? are: k_Pt/10⁸ L mol^?1 s^?1 = 5.2, 2.8 and 0.27 for CH_3, C₂H₅, and CH₂Cl in aqueous solution at pH 1. Those with cis-Pt(NH₃)₂Cl₂ are somewhat smaller, and those for Pt(NH₃)₄²⁺ too small to measure will) this technique. The product analysis indicates that the decomposition of organoplatinum takes place by hydrolysis and (for R = C₂H₅ only) by β-elimination, The kinetic isotope effect on die β-elimination of DCH₂CH₂PtC₄,^2? is k_H/k_D = 1.2. The β-elimination step produces a Pt^III-hydride that releases hydrogen gas and forms {Pt_III-OH}. The short-lived Pt(III) intermediate may disproportionate or oxidize the Co^II complex that is produced in the radical-generating step.     

Darstellung und NMR-spektroskopische Untersuchungen der tert-Butylimino-cyclopentadienylvanadium (V)-Verbindungen tC4H9NVCpX2 (X=SR,SeC6H5, Br,I)

Synthesis and NMR Spectroscopic Studies of tert-Butylimino-cyclopentadienylvanadium(V) Compounds ^tC₄H₉N?VCpX₂ (X=SR, SeC₆H₅, Br, I ) Syntheses of the cyclopentadienylvanadium(V) compounds ^tC₄H₉N?VCpX₂ (X=SR, SeC₆H₅, Br, I) ^tC₄H₉N?VCp (S^tC₄H₉) and ^tC₄H₉N?VCp[S? (CH₂)₃? S] ( 4 ) are described starting from ^tC₄H₉N?VCpCl₂. ^tC₄H₉N?VCl₃ reacts with BBr₃ and BI₃ by halogen exchange forming the trihalogenides ^tC₄H₉N?VX₃ (X=Br, I). All compounds obtained are characterized by ¹H and ⁵¹V NMR spectroscopy. 4 has been found by X-ray diffraction analysis to be a distorted tetrahedral vanadium complex with a chair conformation of the VS₂C₃-ring.     

Synthesis,structure, EPR,and DFT calculation on dinuclear paddle wheel Cu(II) complexes with bis-chelate rings

A series of diester-dicarboxylic acids, L¹H₂, L²H₂, L³H₂, L⁴H₂, and L⁵H₂ and their dinuclear Cu₂ complexes [Cu(L¹)CH₃CN]₂ (1), [Cu(L²)H₂O]₂ (2), [Cu(L³)CH₃CN]₂ (3), [Cu(L⁴)EtOH]₂ (4), and [Cu(L⁵)CH₃CN]₂ (5), were synthesized. The crystal structures obtained for 1, 2, and 4 and the density functional theory optimized structures for 2, 3, and 5 illustrated the formation of tetracarboxylate “paddle wheel” complexes. The phthalyl and diphenyl head groups and the spacer moieties were appropriately altered and the size of the chelate ring expanded from 15-membered in 1 to 21-membered in 5. The dinuclear units have strong Cu–Cu interaction with EPR spectra exploring spin coupled features.     

Hydrazinium Oxalatometallates of Rare Earths(III)

Oxalates of La(III), Ce(III), Pr(III), Nd(III) and Sm(III) with the hydrazinium cation with the general formulae (N₂H₅)₄Ln₂(C₂O₄)₅7H₂O (Ln=La³⁺, Ce³⁺, Pr³⁺) and N₂H₅Ln(C₂O₄)₂·3.5H₂O (Ln=Nd³⁺, Sm³⁺) were synthesized. The thermal decompositions of these compounds take place in three stages: thermal dehydration at 65–100°C, exothermic decomposition of the N₂H₄ at 230–260°C, and oxidation of the oxalate ion.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis and characterization of cyclopentadienyl/alkoxo titanium dichlorides: structural analysis of monocyclopentadienyl titanium dichlorides with ligands derived from menthol and borneol

A variety of monocyclopentadienyl alkoxo titanium dichloride and bisalkoxo titanium dichloride complexes have been prepared and characterized by spectroscopic techniques. The titanium derivatives containing both cyclopentadienyl and various alkoxo ligands [Ti(η⁵-C₅H₅)(OR)Cl₂] (1-5) have been synthesized from the reaction of [Ti(η⁵-C₅H₅)Cl₃] with 1 equivalent of the corresponding alcohol in THF in the presence of triethylamine (ROH = Adamantanol, 1R,2S,5R-(−)-menthol, 1S-endo-(−)-borneol, cis-1,3-(−)-benzylideneglycerol, 1,2:3,4-di-O-isopropylidene-α-d-galactopyranose). The bisalkoxo titanium dichloride derivatives [TiCl₂(OR)₂] (6-10) have been prepared by a redistribution reaction between Ti(OR)₄ and TiCl₄ compounds 6-8 (OR = Adamantanoxy, (1R,2S,5R)-(−)menthoxy, (1S-endo)-(−)-borneoxy) and by reaction of [Ti(OR)₂(OPrⁱ)₂]₂ with CH₃COCl compounds 9 and 10 (OR = 1,2:3,4-di-O-isopropylidene-α-d-galactopyranoxy, and 1,2:5,6-di-O-isopropylidene-α-d-glucofuranoxy). The molecular structures of 2 and 3 have been determined by single crystal X-ray diffraction studies.     

Synthesis and characterization of methyl-phenyl-substituted cyclopentadienyl zirconium complexes

The trisubstituted methyl-phenyl-silyl-cyclopentadienes [Me-Ph-C₅H₃(SiMe₂X)] (X = Me, Cl, NHt-Bu) and [(Me-Ph-C₅H₃)₂SiMe₂] and the lithium salts Li₂[Me-Ph-C₅H₂(SiMe₂Nt-Bu)] and Li₂[(Me-Ph-C₅H₂)₂SiMe₂] have been isolated by conventional methods and characterized by NMR spectroscopy. Desilylation of [Me-Ph-C₅H₃(SiMe₃)] with ZrCl₄(SMe₂)₂ gave the monocyclopentadienyl complex [Zr(η⁵-1-Ph-3-Me-C₅H₃)Cl₃]. The ansa-metallocene [Zr{(η⁵-2-Me-4-Ph-C₅H₂)SiMe₂(η⁵-2-Ph-4-Me-C₅H₂)}Cl₂] was obtained from the mixture of isomers formed by transmetallation of Li₂[(Me-Ph-C₅H₂)₂SiMe₂] to ZrCl₄ and characterized as the meso-diastereomer by X-ray diffraction methods. Similar transmetallation of Li₂[Me-Ph-C₅H₂(SiMe₂Nt-Bu)] gave the silyl-η-amido complex [Zr{η⁵-2-Me-4-Ph-C₅H₂(SiMe₂-η-Nt-Bu)}Cl₂] that was further alkylated to give [Zr{η⁵-2-Me-4-Ph-C₅H₂(SiMe₂-η-Nt-Bu)}R₂] (R = Me, CH₂Ph) and used as a catalyst precursor, activated with MAO, for ethene and propene polymerization. All of the new compounds were characterized by elemental analysis and NMR spectroscopy.     

Ethylene polymerization by 3-oxa-pentamethylene bridged dinuclear metallocene (Ti, Zr)/MAO systems

Two hetero-atom containing bridged dinuclear metallocene complexes, (CpMCl₂)₂(C₅H₄CH₂CH₂OCH₂CH₂C₅H₄) [M = Ti (1), Zr (2)], have been synthesized by treating the disodium salt of the corresponding ligand (C₅H₅CH₂CH₂)₂O with two equivalents of CpTiCl₃ and CpZrCl₃ · DME, respectively, in THF at 0 °C and characterized by ¹H- and ¹³C-NMR, MS and IR spectroscopy. Homogenous ethylene polymerization by those complexes has been conducted systematically in the presence of methylaluminoxane (MAO). The influences of reaction parameters, such as [MAO]/[Cat] molar ratio, catalyst concentration, ethylene pressure, temperature and time, have been studied in detail. The catalytic activities of the dinuclear complexes 1 and 2 were higher than those of (MeCpTiCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (3), (CpZrCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (4) and the mononuclear metallocenes Cp₂TiCl₂ and Cp₂ZrCl₂, respectively. Complex 2 showed high catalytic activity at high temperature (50-100 °C) and high pressure (6 bar). The molecular weight distributions of polyethylene produced by 1 and 2 (MWD = 2.49 and 5.90) were broader than those using the corresponding mononuclear metallocenes (MWD = 2.05 and 2.15). The melting points of the polyethylene produced ranged from 129 to 133 °C, indicating a high linearity and a high crystallinity.     

o-Phenylene-bridged Cp/amido titanium and zirconium complexes and their polymerization reactivity

o-Phenylene-bridged trimethylcyclopentadienyl/amido titanium complexes [(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]TiCl₂ (18, R = CH₃; 19, R = CH₂CH₃; 20, R = CH₂C(CH₃)₃; 21, R = CH₂(C₆H₁₁)) and zirconium complexes {[(η⁵-2,3,5-Me₃C₅H)C₆H₄NR-κN]ZrCl-μCl}₂ (22, R = CH₃; 23, R = CH₂CH₃; 24, R = CH₂C(CH₃)₃; 25, R = CH₂(C₆H₁₁); 26, R = C₆H₁₁; 27, R = CH(CH₂CH₃)₂) are prepared via a key step of the Suzuki-coupling reaction between 2-dihydroxyboryl-3-methyl-2-cyclopenten-1-one (2) and the corresponding bromoaniline compounds. The molecular structures of titanium complexes 18 and 19 and dinuclear zirconium complexes 24 and 26 were confirmed by X-ray crystallography. The Cp(centroid)-Ti-N and Cp(centroid)-Zr-N angles are smaller, respectively, than those observed for the Me₂Si-bridged complex [Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂ and its Zr-analogue, indicating that the o-phenylene-bridged complexes are more constrained than the Me₂Si-bridged complex. Titanium complex 19 exhibits comparable activity and comonomer incorporation to the CGC ([Me₂Si(η⁵-Me₄C₅)(N^tBu)]TiCl₂) in ethylene/1-octene copolymerization. Complex 19 produces a higher molecular-weight polymer than CGC.     

Pyrolysis of metallocene complexes (ηC5H4R)2MR: An organometallic route to metal carbide (MC) materials (M = Ti,Zr, Hf)

The following compounds were prepared and their pyrolysis in a stream of argon was studied: (η⁵-C₅H₅)₂Ti(C?CC₆H₅)₂, (η⁵-C₅H₄SiMe₃)₂-Ti(SH)₂, [(η⁵-C₅H₅)Ti(μ-CH₂)]₂, (η⁵-C₅H₅)₂ZrR₂-(R?CH₂, CH₂C₆H₅, N(CH₃)₂), (η⁵-C₅H₄CH₃)₂-Zr(C?CC₆H₅)₂, [(η⁵-C₅H₄SiMe₃)₂Zr(μ-S)]₂, [(η⁵-C₅H₄SiMe₃)₂Hf(μ-S)]₂ and (η⁵-C₅H₄SiMe₃)₂Hf-(C?CC₆H₅)₂. The products of bulk pyrolysis of these materials were formed in 20–40% yield, based on the charged sample weight, and consisted mainly of titanium carbide together with small amounts of amorphous carbon.     

Ethylene polymerization by rigid benzene ring centered dinuclear metallocene (Ti, Zr)/MAO systems

Two rigid benzene centered dinuclear metallocene complexes C₆H₂[(CH₂C₅H₄)₂MCl₂]₂, M = Ti (1), Zr (2) have been prepared by treating two equivalents of TiCl₄ and ZrCl₄ with the tetralithium salt of the ligand C₆H₂(CH₂C₅H₅)₄-1,2,4,5 in toluene and characterized by ¹H NMR and elemental analysis. Both complexes are effective catalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). The influence of [MAO]/[Cat] molar ratio, catalyst concentration, polymerization temperature and time has been tested in detail. The catalytic activity of complex 2 is more than two times higher than that of complex 1, which is still more active than that of the tetranuclear titanocene C₆H₂[CH₂C₅H₄Ti(C₅H₅)Cl₂]₄-1,2,4,5 (5). On the other hand, the catalytic activities of 1 and 2 is slightly lower than that of the dinuclear metallocene complexes C₆H₄[CH₂C₅H₄Ti(C₅H₄CH₃)Cl₂]₂-1,3 (3) and C₆H₄[CH₂C₅H₄Zr(C₅H₅)Cl₂]₂-1,3 (4), respectively, which is related to the limited intermolecular rotation of the metallocene units in 1 and 2. The melting points above 130 °C indicate a polyethylene formed by complexes 1 and 2 with highly linear and highly crystalline. GPC spectra show that polyethylene produced by complexes 1 and 2 has a broad and even bimodal molecular weight distribution (MWD).     

Radical polyaddition reaction of bis(α-trifluoromethyl-β,β-difluorovinyl) terephthalate onto diformylalkane

Radical polyaddition of bis(α-trifluoromethyl-β,β-difluorovinyl) terephthalate [CF₂C(CF₃)OCOC₆H₄COOC(CF₃)CF₂] (BFP) with diformylalkanes to produce fluorinated polymer bearing ketone-carbonyl groups in main chain is described. The radical additions of hexanal, pentanal and benzaldehyde with 2-benzoxypentafluoropropene [CF₂C(CF₃)OCOC₆H₅] were examined as model reactions to yield the corresponding addition product with hexanal and pentanal in high yields, and no product with benzaldehyde. The addition of acyl and hydrogen was found to take place to perfluoroisopropenyl group. The results of the model reactions suggested that the reaction might be applicable to polyaddition to produce polymers with diformylalkanes. The results of polyaddition of BFP with glutaraldehyde under the emulsion polymerization condition showed that the polymer of M_n=4.8×10³ was obtained in fairly high yields. This might be a novel preparation method of polymers bearing fluorinated polyketone structure.     

Phosphan-, Phosphit- und Phosphido-Komplexe des Vanadiums(V)

Phosphane, Phosphite, Phosphido, Complexes of Vanadium(V) Complex formation of tert-butylimidovanadium(V)trichloride ( 1 ) with phosphanes und phosphites has been studied. Syntheses of phosphidovanadium(V) compounds ^tC₄H₉N?VCp(NH^tC₄H₉)[P(SiMe₃)₂] and ^tC₄H₉N?VCp(NⁱProp₂)(PR₂) (R?SiMe₃, Ph) are described starting from the corresponding chlorovanadium(V) complexes. The reaction of 1 with silver hexafluorophosphate yields a bis(fluoro)phosphidovanadium(IV complex [(μ-PF₂)₂V₂Cl₂)(N^tC₄H₉)₂]; as primary intermediate product of the unknown redox reaction a cationic vanadium(V) complex [^tC₄H₉N?VCl₂ · PPh₃]⁺PF₆^? has been isolated. 1 reacts with an excess of diisopropylamine forming ^tC₄H₉N?V(NⁱProp₂)Cl₂ ( 16 ); in addition the following diisopropylamido-tert-butylimidovanadium(V) compounds ^tC₄H₉N?VCp(NⁱProp₂)Cl ( 3 ) and ^tC₄H₉N?V(NⁱProp₂)X₂ (X?CH₂CMe₃, O^tC₄H₉, CH₃COO) has been prepared. All compounds obtained are characterized by ¹H, ⁵¹V, ³¹P NMR spectroscopy. The X-ray diffraction analysis of 16 and 3 indicate a planar coordination sphere of the amido nitrogen atom.     

Novel fluorinated polymer from 18-crown-6 by radical polyaddition

Radical polyaddition of bis(α-trifluoromethyl-β,β-difluorovinyl) terephthalate [CF₂C(CF₃)OCOC₆H₄COOC(CF₃)CF₂] (BFP) with 18-crown-6 to produce fluorinated polymer bearing crown ether moiety in main chain is described. Prior to polyaddition, the model reaction of 2-benzoxypentafluoropropene [CF₂C(CF₃)OCOC₆H₅] (BPFP) with 18-crown-6 was investigated to afford suitable reactions condition for polyaddition. The polyaddition of BFP with 18-crown-6 yielded a soluble polymer bearing M_n=5.5×10⁴ with unimodal molecular weight distribution after purification by reprecipitation with cold ethanol.     

Homolysis of the Ln-N bond: Synthesis, characterization and catalytic activity of organolanthanide(II) complexes with furfuryl- and tetrahydrofurfuryl-functionalized indenyl ligands

A series of new organolanthanide(II) complexes with furfuryl- and tetrahydrofurfuryl-functionalized indenyl ligands were synthesized via one-electron reductive elimination reaction. Treatments of [(Me₃Si)₂N]₃Ln^III(μ-Cl)Li(THF)₃ (Ln = Yb, Eu) with 2 equiv. of C₄H₇OCH₂C₉H₇ (1) or C₄H₃OCH₂C₉H₇ (2), respectively in toluene at moderate high temperatures produced, after workup, the corresponding organolanthanide(II) complexes with formula [η⁵:η¹-(C₄H₇OCH₂C₉H₆)]₂Ln^II (Ln = Yb (5), Ln = Eu (6)) and [η⁵:η¹-(C₄H₃OCH₂C₉H₆)]₂Ln^II (Ln = Yb (7), Ln = Eu (8)) in reasonable to good yields. Treatments of [(Me₃Si)₂N]₃Ln^III(μ-Cl)Li(THF)₃ (Ln = Yb, Eu) with 2 equiv. of C₄H₇OCH₂C₉H₆SiMe₃ (3) or C₄H₃OCH₂C₉H₆SiMe₃ (4), respectively, in toluene at moderate high temperatures afforded, after workup, the corresponding organolanthanide(II) complexes with formula [η⁵:η¹-(C₄H₇OCH₂C₉H₅SiMe₃)]₂Ln^II (Ln = Yb (9), Ln = Eu (10)) and[η⁵:η¹-(C₄H₃OCH₂C₉H₅SiMe₃)]₂Ln^II (Ln = Yb (11), Ln = Eu (12)) in good to high yields. All the compounds were fully characterized by spectroscopic methods and elemental analyses. The structure of complex 9 was additionally determined by single-crystal X-ray analyses. Studies on the catalytic activities of complexes showed that the complexes having silyl group functionalized indenyl ligands have high catalytic activities on ε-caprolactone polymerization. The temperatures, substituted groups on the indenyl ligands of the complexes, and solvents effects on the catalytic activities of the complexes were examined.     

Synthesis,characterization, DNA-binding,and antioxidant activities of four copper(II) complexes containing N-(3-hydroxybenzyl)-amino amide ligands

Four new substituted amino acid ligands, N-(3-hydroxybenzyl)-glycine acid (HL₁), N-(3-hydroxybenzyl)-alanine acid (HL₂), N-(3-hydroxybenzyl)-phenylalanine acid (HL₃), and N-(3-hydroxybenzyl)-leucine acid (HL₄), were synthesized and characterized on the basis of ¹H NMR, IR, ESI-MS, and elemental analyses. The crystal structures of their copper(II) complexes [Cu(L₁)₂]·2H₂O (1), [Cu(L₂)₂(H₂O)] (2), [Cu(L₃)₂(CH₃OH)] (3), and [Cu(L₄)₂(H₂O)]·H₂O (4) were determined by X-ray diffraction analysis. The ligands coordinate with copper(II) through secondary amine and carboxylate in all complexes. In 2, 3, and 4, additional water or methanol coordinates, completing a distorted tetragonal pyramidal coordination geometry around copper. Fluorescence titration spectra, electronic absorption titration spectra, and EB displacement indicate that all the complexes bind to CT-DNA. Intrinsic binding constants of the copper(II) complexes with CT-DNA are 1.32?×?10^6?M^?1, 4.32?×?10^5?M^?1, 5.00?×?10^5?M^?1, and 5.70?×?10^4?M^?1 for 1, 2, 3, and 4, respectively. Antioxidant activities of the compounds have been investigated by spectrophotometric measurements. The results show that the Cu(II) complexes have similar superoxide dismutase activity to that of native Cu, Zn-SOD.