Optical retrieval of encrypted digital holograms for secure real-time display

Secure data transmission by use of encrypted digital holograms and an optical retrieval system for secure real-time display are proposed. Original images are encrypted by a double-random phase encryption technique and then are recorded as digital holograms in a CCD, together with a reference plane wave. This digital hologram of the encrypted image can be transmitted to receivers via any conventional electronic or digital communication channels. The decryption key is also recorded as a digital hologram. At the receiver, the original image can be retrieved by an optical correlation-based reconstruction process. Both encryption and retrieval can be performed by all-optical means, and thus a real-time secure display can be implemented. We demonstrate the proposed system numerically and experimentally.     

用于实现散射介质中时间反演的数字相位共轭的相干性

抑制散射介质对光的散射,调控光在散射介质中的传输,是光通信、生物光子学、光镊等领域的重要课题.设计并实现了基于宽谱光源和数字相位共轭的可调控光在散射介质中传输的时间反演实验系统.实验获取了不同相干长度下物光和参考光束之间的光程差与干涉图样、相位图及时间反演信号之间的关系,分析了光源相干性对调控光在散射介质中传输的影响.实验结果表明,基于宽谱光源的相干特性和数字相位共轭技术,通过调节光程差能选择性获取同一散射角度及相同传输路径的光束的相对相位,再利用空间光调制器对参考光束进行调控,实现光束的反向传播,从而选择性实现对同一散射角度及相同传输路径的光的时间反演.     

Image encryption based on extended fractional Fourier transform and digital holography technique

We present a new optical image encryption algorithm that is based on extended fractional Fourier transform (FRT) and digital holography technique. We can perform the encryption and decryption with more parameters compared with earlier similar methods in FRT domain. In the extended FRT encryption system, the input data to be encrypted is extended fractional Fourier transformed two times and random phase mask is placed at the output plane of the first extended FRT. By use of an interference with a wave from another random phase mask, the encrypted data is stored as a digital hologram. The data retrieval is operated by all-digital means. Computer simulations are presented to verify its validity and efficiency.     

Gamma-distorted fringe image modeling and accurate gamma correction for fast phase measuring profilometry

In fast phase-measuring profilometry, phase error caused by gamma distortion is the dominant error source. Previous phase-error compensation or gamma correction methods require the projector to be focused for best performance. However, in practice, as digital projectors are built with large apertures, they cannot project ideal focused fringe images. In this Letter, a thorough theoretical model of the gamma-distorted fringe image is derived from an optical perspective, and a highly accurate and easy to implement gamma correction method is presented to reduce the obstinate phase error. With the proposed method, high measuring accuracy can be achieved with the conventional three-step phase-shifting algorithm. The validity of the technique is verified by experiments.     

相位共轭皮秒光脉冲的直接观察和记录

利用条纹照相机直接观察和记录了由全息相位共轭技术产生的相位共轭的皮秒光脉冲。实验结果与理论相符合。 关键词：     

Digital phase-shifting interferometer with an electrically addressed liquid-crystal spatial light modulator

A digital phase-shifting interferometer with a liquid-crystal-display coupled, parallel aligned, nematic liquid-crystal spatial light modulator is developed. The optical phase shift in the Michelson-type polarization interferometer is achieved by a digital phase shift of a grating displayed on the spatial light modulator. Accurate experimental results of using the heterodyne system for pi/2 phase steps were demonstrated. A phase-shifting interferometer with no moving parts and no requirement for calibration of the value of the phase shift was achieved.     

光学扫描全息术研究进展

光学成像技术极大地拓展了人类的视觉极限,提高了人们观察和理解现实世界的能力。越多地获得目标的光学信息,对其的认识越充分。数字全息术是一种可以将样本的三维信息以二维全息图的形式编码记录下来的一种成像技术。通过获得由携带物体信息的物光波和参考光波叠加产生的干涉图案,可以以数字化的方式实现多种重建模态,例如图像恢复、相位成像和切片成像等。光学扫描全息术是一种独特的数字全息成像技术,通过主动式二维化扫描对三维物体进行成像,其完整的波前信息可以被单像素探测器记录,并基于光外差检测进行信号解调,从而恢复出复数全息图。对光学扫描全息术的最新进展进行介绍。首先,基于双光瞳成像系统,通过特殊的硬件和算法设计,提高光学成像系统的性能,如提高空间分辨率、缩短扫描时间。其次,基于计算成像原理,通过改进和优化全息像重建算法,实现高质量的图像恢复,主要涉及切片成像和三维成像等重建模态。第三,介绍光学扫描全息术的其他研究方向,并讨论该领域未来可能的发展方向。     

Curvature measurement of optical surface using digital holography

In this paper, an optical surface curvature measurement technique based on digital holography is proposed. Unlike the previous digital holographic methods, which only involve a small part of the measured data for parameter estimation, the proposed method adopts more of them using least square method. Hence, the analyzed result is not affected by data extraction direction and less sensitive to imperfect phase compensation. The proposed method is demonstrated with a sample of reflection mirror in laser resonator, and verified by comparing the measurement result with that of the white light interferometer.     

基于白光数字莫尔的三维数字成像系统

提出一种基于数字莫尔的三维光学数字成像系统,此系统采用了非相干光投影和空间相移算法以及混合模板相位复原技术来重构连续位相分布图。给出一种光学几何灵敏度的确定方法并由此区得空间自由表面的三维数字图像。文中还给出由该光学数字化系统得以的真实人体面部的三维数字图像的实验结果。     

First step toward a benchtop model of the Laser Interferometer Space Antenna

A technique for simulating large optical path lengths by use of digital delay buffers is presented. This technique is used to generate a synthetic interferometer with one arm having an arbitrary length. The response of the interferometer to phase and frequency modulation is measured and found to be in agreement with predictions. This technique could be used to simulate long-baseline interferometric space missions such as the Laser Interferometer Space Antenna.     

双随机相位加密全息标识防伪技术研究

在输入面和频谱面上分别放置随机相位加密模板对图像数据进行加密是一种高密级的有效数据加密技术。在研究双随机相位数据加密技术的基础上,结合数字全息技术和印刷技术的特点,提出了一种新的双随机相位加密同轴相位全息标识(简称同轴相位全息标识)印刷防伪方法。理论分析证明了同轴相位全息标识方法能有效地恢复原始图像数据,仿真实验证明了该方法具有强抗随机干扰能力和抗位压缩性能。通过打印和扫描实验验证了同轴相位全息标识可以通过普通的数字印刷技术印制在证件等印刷品中作为防伪标识,印刷品中的同轴相位全息标识可以通过扫描输入计算机,变换生成数字图像,通过解密模板可从中恢复出原始图像数据。     

Accuracy and sensitivity of a hole drilling and digital speckle pattern interferometry combined technique to measure residual stresses

This paper reports on the accuracy and sensitivity of digital speckle pattern interferometry (DSPI) when it is combined with the hole drilling technique for measuring residual stresses. The in-plane displacement field generated by the introduction of a small hole is determined using an automated data analysis approach. This method is based on the calculation of the optical phase distribution through a phase-shifting method and the application of a robust iterative phase unwrapping algorithm. It is experimentally demonstrated that residual stresses can be measured with a relative uncertainty of 7.5%. It is also shown that the minimum value of residual stress that can be determined with the DSPI and hole drilling combined technique is about 10% of the yield stress of the material.     

Optical backpropagation for fiber-optic communications using optical phase conjugation at the receiver

A fiber-optic system design with optical backpropagation that uses an optical phase conjugator, high-dispersion fibers, and highly nonlinear fibers is investigated. The proposed technique outperforms the midpoint optical phase conjugation and digital backpropagation with the same step size.     

基于光学三维形貌数字重建的不规则表面的参数测量

针对不规则形状物体表面参数测量困难的问题,提出了一种利用光学三维形貌数字重建技术来获取待测物体表面三维数字信息的方法。首先利用傅里叶变换得到反映三维物体表面高度的相位数据,在计算机中重建三维待测物体,然后再利用Matlab软件编写面向用户的人机交互界面,通过计算机鼠标指定待测量的表面区域,最后运用Matlab软件对鼠标所指定区域的三维数字信息进行处理,根据几何关系计算出指定区域的表面积、两点间的曲线长度等参数,实现人机交互式的非接触测量。     

半色调编码计算全息图的数字水印方法

提出一种新的基于信息光学的数字水印方法。该方法将水印信息隐藏于半色调编码的计算全息图之中。通过相位复原技术将需隐藏的水印信息编码为相位函数嵌入在复波前中,其振幅定义为宿主图像,通过计算全息记录复波前并对全息图进行半色调编码完成水印信息的嵌入。水印的提取过程只需对含有水印信息的半色调图像进行光学或数字的傅里叶变换即可完成。并给出了算法有效性的理论分析和仿真实验结果。结果证明这种水印技术对于各种数字图像处理操作具有很高的稳健性,且半色调编码图的二值特性使嵌入水印具有很强的抗打印、抗复印、抗扫描的能力。     

A novel method of high resolution imaging through random perturbation wave front

A novel method is proposed for eliminating the effect of the traditional optical aberration on high resolution imaging by random perturbation wave front and digital image processing. A random phase mask, whose phase spectrum fluctuation is accordant with Kolmogorov distribution, is positioned near the aperture stop of optical system, making the optical aberration image become random perturbation image, that is, the intermediate image. The blind deconvolution algorithm based on maximum-likelihood estimation technique is used to restore the intermediate image acquired by a digital detector. The effects of optical aberrations and the noise on the restoration image are explored. To demonstrate the validity of the method proposed, the computer simulation and laboratory experiments are carried out for the imaging of the optical system with primary aberration. The results have shown that the present method is well suited for effectively improving the imaging quality of the optical system with certain aberration, thus making the optical system resolution close to or reach the diffraction-limit of the optical system.     

Watermarking of three-dimensional objects by digital holography

We present an optical method for information watermarking of three-dimensional (3D) objects by digital holography. A hidden image is embedded by double phase encoding in a phase-shift digital hologram of the 3D object. We decode the watermarked hologram to reconstruct the hidden image and the 3D object. We use either the entire hologram or a part of it to decode the hidden image. Experiments are presented to illustrate the ability to recover both the 3D object and the decoded hidden image. Digital holograms of the 3D object are obtained by optical experiments. The watermarking process, 3D object reconstruction, and hidden image recovery are performed digitally. To the best of our knowledge, this is the first report of 3D object watermarking by use of a phase encoding technique and digital holography.     

Optical correlation techniques in fluid dynamics

Three flow measurement techniques make use of fast digital correlators. The most widely spread is photon correlation velocimetry using crossed laser beams, and detecting Doppler shifted light scattered by small particles in the flow. Depending on the processing of the photon correlation output, this technique yields mean velocity, turbulence level, and even the detailed probability distribution of one velocity component. An improved data processing scheme is demonstrated on laminar vortex flow in a curved channel. In the second method, rate correlation based upon threshold crossings of a high pass filtered laser Doppler signal can be used to obtain velocity correlation functions. The most powerful set-up developed in our laboratory uses a phase locked loop type tracker and a multibit correlator to analyze time-dependent Taylor vortex flow. With two optical systems and trackers, cross-correlation functions reveal phase relations between different vortices. The last method makes use of refractive index fluctuations (eg in two phase flows) instead of scattering particles. Interferometry with bidirectional counting, and digital correlation and probability analysis, constitutes a new quantitative technique related to classical Schlieren methods. Measurements on a mixing flow of heated and cold air contribute new ideas to the theory of turbulent random phase screens.     

两步广义相移干涉术的光学实验验证

提出了一种基于两步广义相移干涉术的波前再现技术以及基于衍射场统计特性的未知相移值提取算法,并且进行了光学实验验证.该方法中可仅利用两幅干涉图及一次不需精确预设的未知相移,参照物光光强和参考光光强,即可通过计算提取真实的相移量,进而恢复出物波波前复振幅,而无需借助傅里叶谱分析或数字滤波等操作.在光学实验中,对借助于空间光调制器（SLM）的间接输入和三维漫反射物体直接输入两种情况进行了详细地研究,得到的光学实验结果验证了所提方案的有效性和可行性. 关键词： 信息光学 相移干涉术 波前再现 数字图像处理     

Quantitative three-dimensional holographic interferometry for flow field analysis

Holographic interferometry offers the potential for quantitative, wholefield analysis of three-dimensional compressible flows. The technique is non-intrusive, does not require the introduction of seeding particles, and records the entire flow information within the pulse duration of a Q-switched ruby laser (˜30ns). At present, however, holographic interferometry is mainly used qualitatively due to the practical restrictions of data recording, acquisition and processing.To address the potential of holographic flow analysis a prototype multi-channel interferometer has been designed and preliminary wind tunnel results have been obtained. The proposed configuration uses specular illumination which, unlike comparable diffuse systems, does not suffer from fringe localisation and speckle noise. Beam collimation and steering through the flow field is achieved in a single operation by the use of holographic optical elements (HOEs). The resulting design is compact, light efficient, has aberration compensation, and the recorded data are conducive to both tomographic analysis and direct comparison to computational fluid dynamics (CFD) predictions.Holograms have been recorded of simple two-dimensional and axisymmetric compressible flows, to compare the accuracy of holographic density measurements with data from conventional pressure sensors and CFD codes. Data extraction from the holograms, and the elimination of rigid body motion, was achieved using digital Fourier transform fringe analysis. The introduction of phase errors by image processing has been investigated by analysing simulated fringe patterns generated from a combination of experimental amplitude information and computer generated phase data.