Experimental and theoretical studies on dynamic properties of Li ions in LixMn2O4

In order to study the dynamic properties of Li_xMn₂O₄, potential relaxation techniques (PRT) is used to measure the chemical diffusion coefficient of Li_xMn₂O₄. Results are presented for x ranges from x=0.1 to 0.9. They show that the chemical diffusion coefficient at the two-phase coexistent stage near x=0.3 and 0.7 is higher than at the single-phase stage during the insertion and extraction process. Monte Carlo (MC) simulations are also used to simulate the ionic conductivity σ of Li ions in Li_xMn₂O₄ and its dependence as a function of lithium concentration x. The results show an M shaped curve in the plot of ionic conductivity σ versus x when the simulation temperature is 293 K, which confirms the experimental PRT results. The voltage profiles of Li_xMn₂O₄/Li cells were also simulated with different boundary conditions.     

Small polaron migration in LixMn2O4: From first principles calculations

Migration of small polarons in λ-MnO₂, Li_0.5Mn₂O₄ and LiMn₂O₄ is studied via first principles calculations. Migration energy barriers of single small polaron migrations in λ-MnO₂, Li_0.5Mn₂O₄ and LiMn₂O₄ are 0.22 eV, 0.45 eV and 0.35 eV, respectively. The energy level changes of Mn-3d states along the polaron migration path are analyzed in detail. Results indicate that the activation energy barrier of polaron migration is strongly associated with the energy level shift of Mn-3dz² orbital, which is dependent on the short range structural arrangement of Mn³⁺/Mn⁴⁺ in the crystal. The electrical conduction properties of Li_xMn₂O₄ at room temperature are then discussed.     

Li0.5Fe2.5−xMnxO4 ferrite sintered from microwave-induced combustion

Li_0.5Fe_2.5−xMn_xO₄ (0≦x≦1.0) powders with small and uniformly sized particles were successfully synthesized by microwave-induced combustion, using lithium nitrate, ferric nitrate, manganese nitrate and carbohydrazide as the starting materials. The process takes only a few minutes to obtain as-received Mn-substituted lithium ferrite powders. The resultant powders annealed at 650 ^°C for 2 h and were investigated by thermogravimeter/differential thermal analyzer (TG/DTA), X-ray diffractometer (XRD), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermomagnetic analysis (TMA). The results revealed that the Mn content were strongly influenced the magnetic properties and Curie temperature of Mn-substituted lithium ferrite powder. As for sintered Li_0.5Fe_2.5−xMn_xO₄ specimens, substituting an appropriate amount of Mn for Fe in the Li_0.5Fe_2.5−xMn_xO₄ specimens markedly improved the complex permeability and loss tangent.     

Microstructure characterization and magnetic behavior of NiAlxFe2−xO4 and Ni1−yMnyAl0.2Fe1.8O4 ferrites

NiAl_xFe_2−xO₄ and Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites were prepared by the conventional ceramic method and were characterized by X-ray diffraction, scanning electron microscopy, and magnetic measurements. The single spinel phase was confirmed for all prepared samples. A proper explanation of data is possible if the Al³⁺ ions are assumed to replace Fe³⁺ ions in the A and B sites simultaneously for NiAl_xFe_2−xO₄ ferrites, and if the Mn²⁺ ions are assumed to replace Ni²⁺ ions in the B sites for Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites. Microstructural factors play an important role in the magnetic behavior of Ni_1−yMn_yAl_0.2Fe_1.8O₄ ferrites with large Mn²⁺ content.     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Effect of allied and alien ions on the EPR spectrum of Mn-containing lithium-manganese spinel oxides

Electron paramagnetic resonance spectroscopy was used for studying the effect of allied and alien ions on the EPR spectrum of Mn⁴⁺-containing lithium-manganese spinel oxides. Manganese spinel oxides with paramagnetic Mn⁴⁺ and diamagnetic substituents in the 16d spinel sites were studied: Li[Mg_0.5Mn_1.5]O₄, Li[Mg_0.5−xCo_2xMn_1.5−x]O₄, 0<x≤0.5, and Li[Li_1/3Mn_5/3]O₄. Ni²⁺-ions with integer-spin-ground state (S=1) were selected as alien ions: Li[Mg_0.5−xNi_xMn_1.5]O₄ (0≤x≤0.5), Li[Li_(1−2x)/3Ni_xMn_(5−x)/3]O₄ (0≤x≤0.5), and Li[Ni_0.5Mn_1.5−yTi_y]O₄ (0≤y≤1.0). It was shown that in Ni-substituted oxides the low temperature EPR response comes from magnetically correlated Ni-Mn spins, while at high registration temperature Mn⁴⁺ ions give rise to the EPR profile. Analysis of the EPR line width allows differentiating between the contributions of the density of paramagnetic species and the strength of the exchange interactions in magnetically concentrated systems. The density of allied and alien paramagnetic species has no effect on the EPR line width in cases when the strengths of antiferro- and ferromagnetic interactions on an atomic site are close. On the contrary, when antiferro- or ferromagnetic interactions on an atomic site are dominant, the EPR line width increases with the density of paramagnetic species.     

Cr-doping effect on the structural, magnetic, transport properties and Raman spectroscopy of La(2+x)/3Sr(1−x)/3Mn1−xCrxO3 perovskites

A series of the double-doping samples La_(2+x)/3Sr_(1−4x)/3Mn_1−xCr_xO₃ (0?x?0.25) with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 have been fabricated. The structural, magnetic, transport properties and Raman spectroscopy have been investigated, and no apparent crystal structure change is introduced by Cr doping up to x=0.25. But the Curie temperature T_C and metal-insulator transition temperature T_MI are strongly affected by Cr substitution. The room temperature Raman spectra start exhibiting some new features following the increasing concentration of Cr substitutions. Moreover, it is worth noting that the frequency of the A_1g phonon mode can also be well correlated with the A-site mismatch effect (σ²), which is influenced mainly by the variety of the Sr content.     

Structural and magnetic properties of Mg(In2−xMnx)O4 system

We synthesized the Mn-doped Mg(In_2−xMn_x)O₄ oxides with 0.03?x?0.55 using a solid-state reaction method. The X-ray diffraction patterns of the samples were in a good agreement with that of a distorted orthorhombic spinel phase. Their lattice parameters and unit-cell volumes decrease with x due to the substitution of the smaller Mn³⁺ ions to the larger In³⁺ ions. The undoped MgIn₂O₄ oxide presents diamagnetic signals for 5 K?T?300 K. The M(H) at T=300 K reveals a fairly negative-sloped linear relationship. Neither magnetic hysteresis nor saturation behavior was observed in this parent sample. For the Mn-doped samples, however, positive magnetization were observed between 5 and 300 K even if the x value is as low as 0.03. The mass susceptibility enhances with Mn content and it reaches the highest value of 1.4×10⁻³ emu/g Oe (at T=300 K) at x=0.45. Furthermore, the Mn-doped oxides with x=0.06 and 0.2, respectively, exhibit nonlinear magnetization curves and small hysteretic loops in low magnetic fields. Susceptibilities of the Mn-doped samples are much higher than those of MnO₂, Mn₂O₃ oxides, and Mn metals. These results show that the oxides have potential to be magnetic semiconductors.     

Magnetic and transport properties in Sr1−xLaxFe1−xMnxO3

The magnetic and transport properties in the perovskite Sr_1−xLa_xFe_1−xMn_xO₃ have been explored. As x rises, the systemic ferromagnetism increases gradually and cluster-spin-glass state occurs in the low-temperature region. For 0.3?x?0.7, the ferromagnetic phase separation from the paramagnetic phase was observed from the results of electron-spin-resonance measurement. Although all samples show a semiconducting behavior, their transport properties are dominated by two different mechanisms, namely, the electronic transport of x?0.5 samples is realized by thermal activation but the variable-range hopping is applied in x?0.7 ones. The different transport mechanism can be understood from the Mn/Fe ions interaction.     

Structural, thermal and magnetic properties of Ni1−xMnxFe2O4 nanoferrites

In this paper, the structural, thermal and magnetic properties of Ni_1−xMn_xFe₂O₄ are presented. It is observed that high concentration of Mn²⁺ ions into NiFe₂O₄ tends to reduce the particle size. Calcination at 500 °C has resulted in the growth of Ni_1−xMn_xFe₂O₄ nanoparticles, but the calcination at 900 °C has led to the evaporation of the majorities of the polyvinyl alcohol. After calcination at 900 °C, crystallographically oriented NiMnFe₂O₄ nanoparticles are formed. These Ni_1−xMn_xFe₂O₄ nanoparticles show hysteresis behaviour upon magnetization. On the other hand, saturation magnetization (Ms) values decreases with increasing Mn content in ferrite due to the influence of Mn²⁺ ion in the sub lattice.     

Transport and magnetic properties of disordered LixVyO2 (x=0.8 and y=0.8)

The magnetic and electron transport properties of rhombohedral Li_xV_yO₂ (x=0.8 and y=0.8) are studied. The dc susceptibility of Li_xV_yO₂ can be well fitted to the modified Curie-Weiss law, which verified the paramagnetic ground state. The magnetic hysteresis and ac susceptibility also confirm this paramagnetism. The Li_xV_yO₂ exhibits semiconducting behavior, which is explained by thermal activated process at high temperature and variable-range hopping mechanism at low temperature. Anderson localization plays an important role in both the electron transport behavior and the magnetic behavior due to the site disorder between the Li⁺ ion and V⁴⁺ ion.     

Enhancement of initial permeability due to Mn substitution in polycrystalline Ni0.50−xMnxZn0.50Fe2O4

The structural and magnetic properties of Mn substituted Ni_0.50−xMn_xZn_0.50Fe₂O₄ (where x=0.00, 0.10 and 0.20) sintered at various temperatures have been investigated thoroughly. The lattice parameter, average grain size and initial permeability increase with Mn substitution. Both bulk density and initial permeability increase with increasing sintering temperature from 1250 to 1300 °C and above 1300 °C they decrease. The Ni_0.30Mn_0.20Zn_0.50Fe₂O₄ sintered at 1300 °C shows the highest relative quality factor and highest initial permeability among the studied samples. The initial permeability strongly depends on average grain size and intragranular porosity. From the magnetization as a function of applied magnetic field, M(H), it is clear that at room temperature all samples are in ferrimagnetic state. The number of Bohr magneton, n(μ_B), and Neel temperature, T_N, decrease with increasing Mn substitution. It is found that Mn substitution in Ni_0.50−xMn_xZn_0.50Fe₂O₄ (where x=0.20) decreases the Neel temperature by 25% but increases the initial permeability by 76%. Possible explanation for the observed characteristics of microstructure, initial permeability, DC magnetization and Neel temperature of the studied samples are discussed.     

Ferromagnetism of epitaxially grown CaRu1−xMxO3 (M=Ti, Mn) films

Epitaxial thin films of CaRu_1−xM_xO₃ (M=Ti, Mn) were fabricated on a (0 0 1)-SrTiO₃ substrate by spin-coat method using organometallic solutions (metal alkoxides). Results of X-ray diffraction and transmission electron microscopy indicate that the epitaxial films were grown pseudomorphically so as to align the [0 0 l] axis of the CaRu_1−xM_xO₃ films perpendicular to the (0 0 1) plane of the SrTiO₃ substrate. Ferromagnetism and metal-insulator transition are induced by the substitution of transition metal ions. The occurrence of ferromagnetism was explained qualitatively assuming a TiRu₆ cluster model for CaRu_1−xTi_xO₃ film and a mixed valence model for CaRu_1−xMn_xO₃ film. Ferromagnetism was also observed for layered CaRuO₃/CaMnO₃ film and CaRuO₃/CaMnO₃/CaRuO₃/CaMnO₃ multilayer film and the magnetism was explained by an interfacial exchange interaction model with magnetic Mn³⁺, Mn⁴⁺, and Ru⁵⁺ ions.     

The effect of cation doping on spinel LiMn2O4: a first-principles investigation

The effect of the cation doping on the electronic structure of spinel LiM_yMn_2−yO₄ (M=Cr, Mn, Fe, Co and Ni) has been calculated by first-principles. Our calculation shows that new M-3d bands emerge in the density of states compared with that in LiMn₂O₄. Simultaneously, the new O-2p bands appear accordingly in almost the same energy range around the Fermi energy owing to the M-3d/O-2p interaction. It is found that the appearance of new O-2p bands in the lower energy position results in a higher intercalation voltage. Consequently, the origin of higher intercalation voltage in LiM_yMn_2−yO₄ can be ascribed to the lower O-2p level introduced by the doping cation M.     

Electrochemical behaviour of nano-sized spinel LiMn2O4 and LiAlxMn2−xO4 (x=Al: 0.00-0.40) synthesized via fumaric acid-assisted sol-gel synthesis for use in lithium rechargeable batteries

Pristine spinel LiMn₂O₄ and LiAl_xMn_2−xO₄ (x=Al: 0.00-0.40) with sub-micron sized particles have been synthesized using fumaric acid as chelating agent by sol-gel method. The synthesized samples were subjected to thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and cyclic voltammetry (CV) and galvanostatic cycling studies. The TGA curve of the gel shows several weight-loss regions stepwise amounting to 55% till 800 °C attributed to the decomposition of the precursors. Calcination to higher temperatures (800 °C) yields pure-phase spinel (LiAl_xMn_2−xO₄), as it is evident from the high-intensity XRD reflections matching to the standard pattern. SEM and TEM studies confirm that the synthesized grains are of uniform regular surface morphology. FT-IR studies show stretching and bending vibration bands of Li-O, Li-Al-Mn-O. LiAl_0.1Mn_1.90O₄ spinel was found to deliver discharge capacity of 139 mA h/g during the first cycle with columbic efficiency of 97%. LiAl_0.1Mn_1.90O₄ spinel exhibits the high cathodic peak current indicating better electrochemical performance. Low doping (x=0.1) of Al is found to be beneficial in stabilizing the spinel structure.     

Structural, chemical and magnetic investigations of polycrystalline Zn1−xMnxO

Present study reports the detailed structural and magnetic, as well as chemical analysis of polycrystalline Zn_1−xMn_xO (where x=0, 0.005, 0.01, 0.03, 0.05 and 0.1) samples synthesized by the high-temperature solid state reaction route. X-ray diffraction studies reveal the presence of secondary phase for higher Mn-doping concentrations (x≥0.03). Secondary phase formation having spinel structure is confirmed and reported as an evidence for the first time using transmission electron microscopy study. Chemical investigations using X-ray photoelectron spectroscopy showed the presence of Mn in two valence states. From the observed results we are of the opinion that Zn²⁺ ions, mainly present at or near grain boundaries, diffuse into manganese oxide to form a stable spinel phase Zn_xMn_3−xO₄ at or near the grain boundaries of ZnO/Zn_1−xMn_xO. Magnetization measurements did not show any magnetic transition down to 5 K.     

Magnetic properties of the Ce2Fe17−xMnx helical magnets up to high magnetic fields

Magnetic properties of the Ce₂Fe_17−xMn_x, x=0–2, alloys in magnetic fields up to 40 T are reported. The compounds with x=0.5–1 are helical antiferromagnets and those with 1<x?2 are helical ferromagnets or helical antiferromagnets at low and high T, respectively. Mn ions in the system carry average magnetic moment of 3.0±0.2 μ_B that couple antiparallelly to the Fe moments. Easy-plane magnetic anisotropy in the Ce₂Fe_17−xMn_x compounds weakens upon substitution of Mn for Fe. The absolute value of the first anisotropy constant in the Ce₂Fe_17−xMn_x helical ferromagnets decreases slower with increasing temperature than that calculated from the third power of the spontaneous magnetization. Noticeable magnetic hysteresis in the Ce₂Fe_17−xMn_x, x=0.5–2, helical magnets over the whole range of magnetic fields reflects mainly irreversible deformation of the helical magnetic structure during the magnetization of the compounds. A contribution from short-range order (SRO) magnetic clusters to the magnetic hysteresis of the helical magnets has been also estimated.     

Magnetic phase diagram of double-layered La2−2xCa1+2xMn2O7 manganite

Double-layered manganite La_2−2xCa_1+2xMn₂O₇ have been synthesized for compositions ‘x’=0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 by solid state reaction method. From X-ray diffraction study, their crystal structures were found to be tetragonal perovskite with lattice parameters decreasing with increasing ‘x’. The decreasing lattice parameters affect the balance between in-plane, intra-bilayer and inter-bilayer exchange interactions, which is reflected on magnetotransport properties. The metal-to-insulator transition temperature is found to vary with composition and peaked around ‘x’=0.3. From ac-susceptibility study, 2D-ferromagnetic ordering was observed at higher temperatures for all compositions whereas 3D-ferromagnetic ordering was observed at quite low temperatures. In low-temperature region, decreasing susceptibility shows antiferromagnetic state for all compositions. On the basis of electrical and magnetic properties, a magnetic phase diagram is given.     

X-ray photoelectron spectroscopy and magnetism of Mn1−xAlxNi alloys

X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), magnetization and magnetic susceptibility of Mn_1−xAl_xNi alloys are reported. A change in the crystallographic structure takes place around x=0.4 from CuAuI to CsCl (B2) structure type. For x0.5 a mixed B2+L2₁ state exists which incorporates antiferromagnetic (B2) and ferromagnetic (L2₁) parts. A direct evidence for the existence of local moments on Mn sites in Mn_1-xAl_xNi alloys is given by the exchange splitting of XPS Mn 3s and Mn 2p3/2 core levels. The gradual filling of the Ni 3d band as the Al concentration increases can be explained by the hybridization of the Ni 3d band and Al 3sp states.