First-principles study of electronic structure, chemical bonding, and optical properties of cubic SrHfO3

Electronic structure and optical properties of SrHfO₃ are calculated using the full potential linearized augmented plane wave plus local orbitals method. The calculated equilibrium lattice is in reasonable agreement with the experimental data. From the density of states (DOS) as well as charge density studies, we find that the bonding between Sr and HfO₃ is mainly ionic and that HfO₃ entities bond covalently. The complex dielectric functions are calculated, which are in good agreement with the available experimental results. The effect of the spin-orbit coupling on the optical properties is also investigated and found to be quite small.     

First-principles study of the electronic and optical properties of rutile TiO2

The electronic, structural properties and optical properties of the rutile TiO₂ have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. We employed the generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure calculations. Our results including lattice parameter, bulk modulus, density of states, the reflectivity spectra, the refractive index and band gap are compared with the experimental data. We present calculations of the frequency-dependent complex dielectric function ε(ω) and its zero-frequency limit ε₁(0).     

Optical properties of the alkaline-earth fluorohalides matlockite-type structure SrFX (X=Cl, Br, I) compounds

The optical properties of the SrFX (X=Cl, Br, I) compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. We employed the generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure calculations. Our calculations show that the valence band maximum (VBM) and conduction band minimum (CBM) are located at Γ resulting in a direct energy gap. We present calculations of the frequency-dependent complex dielectric function ε(ω) and its zero-frequency limit ε₁(0). We find that the value of ε₁(0) increases on decreasing the energy gap. The reflectivity spectra and absorption coefficient have been calculated and compared with the available experimental data.     

First-principles calculations of the electronic and optical properties of In6S7 compound

The electronic structure and the optical properties of In₆S₇ crystal are calculated by the first-principles full-potential linearized augmented plane wave method (FP-LAPW) using density functional theory (DFT) in its generalized gradient approximation (GGA). The calculated band structure shows that the In₆S₇ is a semiconductor with a direct band gap in good agreement with experimental studies. Furthermore, the dielectric tensor and the optical properties, such as absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, are derived and analyzed in the study.     

The dielectric constant of barium mono-chalcogenides and their improved band gap results

We have applied Engel-Vosko exchange energy within density functional theory, to calculate the electronic structure and the optical properties of BaX (X = Te, Se, and S) compounds via full potential linearized augmented plane wave method. We have found that this improves the band gap results comparing to our previous work in which we had made use of Perdew et al. exchange energy functional. We have also calculated the dielectric constant of these compounds, using both Perdew et al. and Engel-Vosko schemes. It is shown that Engel-Vosko exchange energy functional leads to a better result. We have also reported the effect of spin-orbit coupling on the results.     

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite BaHfO3

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite-type BaHfO₃ has been reported using the pseudo-potential plane wave method within the local density approximation. The calculated equilibrium lattice is in a reasonable agreement with the available experimental data. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear pressure dependence of the elastic stiffnesses is found. Band structures show that BaHfO₃ is a direct band gap between the occupied O 2p and unoccupied Hf d states. The variation of the gap versus pressure is well fitted to a quadratic function. Furthermore, in order to understand the optical properties of BaHfO₃, the dielectric function, absorption coefficient, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. We have found that O 2p states and Hf 5d states play a major role in the optical transitions as initial and final states, respectively. This is the first quantitative theoretical prediction of the elastic, electronic and optical properties of BaHfO₃ compound, and it still awaits experimental confirmation.     

First-principles study of the optical properties of PbFX (X = Cl,Br, I) compounds in its matlockite-type structure

We present the results of the ab initio theoretical study of the optical properties for PbFX (X = Cl, Br, I) compounds in its matlockite-type structure using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. We employed generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure calculations. Our calculations show that the valence band maximum (VBM) and conduction band minimum (CBM) are located at Z resulting in a direct energy gap. We present calculations of the frequency-dependent complex dielectric function ε( ω) and its zero-frequency limit ε₁ ( 0 ). We find that the values of ε₁ ( 0 ) increases with decreasing the energy gap. The reflectivity spectra and absorption coefficient has been calculated and compared with the available experimental data. The optical properties are analyzed and the origin of some of the peaks in the spectra is discussed in terms of the calculated electronic structure.     

First-principles studies of magnetic properties and electronic structure of EuC60

The full potential linearized augmented plane wave (FP-LAPW) method with the GGA+U approach was applied to study the electronic structures of the compound Eu₆C₆₀. Present calculations show that the hybridization between the Eu s, d state and the C₆₀ π states plays an essential role in its FM exchange interactions between the 4f electrons and metallic properties.     

First-principles calculations of structural, elastic, electronic and optical properties of the antiperovskite AsNMg3

The density functional theory (DFT) calculations of structural, elastic, electronic and optical properties of the cubic antiperovskite AsNMg₃ has been reported using the pseudo-potential plane wave method (PP-PW) within the generalized gradient approximation (GGA). The equilibrium lattice, bulk modulus and its pressure derivative have been determined. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline AsNMg₃ aggregate. We estimated the Debye temperature of AsNMg₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of AsNMg₃ compound, and it still awaits experimental confirmation. Band structure, density of states and pressure coefficients of energy gaps are also given. The fundamental band gap (Γ-Γ) initially increases up to 4 GPa and then decreases as a function of pressure. Furthermore, the dielectric function, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. The all results are compared with the available theoretical and experimental data.     

First-principle calculations of structural, electronic and optical properties of BaTiO3 and BaZrO3 under hydrostatic pressure

A theoretical study of structural, electronic and optical properties of cubic BaTiO₃ and BaZrO₃ perovskites is presented, using the full-potential linear augmented plane wave (FP-LAPW) method as implemented in the WIEN2K code. In this approach the local density approximation (LDA) is used for the exchange-correlation (XC) potential. Results are given for lattice constant, bulk modulus, its pressure derivative, band structure, density of states, pressure coefficients of energy gaps and refractive indices. The results are compared with previous calculations and experimental data.     

Electronic structure and optical properties of BiSI crystal

Electronic structure and optical properties of BiSI crystal were investigated by the full potential linearized augmented plane wave (FL-LAPW) method with density functional theory (DFT). The complex dielectric function and optical constants, such as optical absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, were calculated. The optical properties of BiSI crystal were studied experimentally by spectroscopic ellipsometry. The experimental results were compared with the theoretical spectra of complex dielectric functions and with the spectra of a pseudo-dielectric function (PDF). This method shows that experimental spectra consist of four Laurence lines sum.     

Theoretical study of CuxAg1−xI alloys

We have performed first-principles calculations using full potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT) to investigate the fundamental properties of Cu_xAg_1−xI alloys. We used both GGA96 [J.P. Perdew, K. Burke, M. Ernzerhof, Phys. Rev. Lett. 77 (1996) 3865.] and EVGGA [E. Engel, S.H. Vosko, Phys. Rev. B. 47 (1993) 13164.] generalized gradient approximations of the exchange-correlation energy that are based on the optimization of total energy and corresponding potential. Quantities such as lattice constants, bulk modulus, band gap, density of occupied states and effective mass were calculated as a function of copper molar fraction x. These parameters were found to depend non-linearly on alloy composition x, except the lattice parameter, which follows Vegard's law. The microscopic origins of the gap bowing were explained using the approach of Zunger and co-workers; we have concluded that the band-gap energy bowing was mainly caused by the chemical charge-transfer effect and the volume deformation , while the structural relaxation contribute to the gap bowing parameter at smaller magnitude. The calculated phase diagram shows a broad miscibility gap for this alloy with a high critical temperature.     

Optical properties of BiSBr and BiSeBr crystals

Optical properties of BiSBr and BiSeBr crystals were investigated by the full potential linearized augmented plane wave (FP-LAPW) method with density-functional theory (DFT). The complex dielectric function and optical constants, such as optical absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, were calculated and compared in the energy range of 0–30 eV. Origin of anisotropic behavior of optical spectra was also discussed. The plasmon energy ?ω_p was estimated to be 18 eV for BiSeBr and 20 eV for BiSBr crystal.     

Electronic structure,chemical bonding and elastic properties of the first thorium‐containing nitride perovskite TaThN3

The full‐potential linearized augmented plane wave method with the generalized gradient approximation for the exchange and correlation potential (LAPW‐GGA) is used to understand the electronic and elastic properties of the first thorium‐containing nitride perovskite TaThN₃. Total and partial density of states, charge distributions as well as the elastic constants, bulk modulus, compressibility, shear modulus, Young modulus and Poisson ratio are obtained for the first time and analyzed in comparison with cubic ThN. The chemical bonding in TaThN₃ is a combination of ionic Th–N and of mixed covalent–ionic Ta–N bonds. The cubic TaThN₃ is semiconducting with the direct gap at about 0.65 eV. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Strong Coulomb correlation effects in ZnO

The electronic structure, band parameters, and optical spectra of wurtzite-type ZnO were studied by first-principles calculations within different approximations of the density functional theory. The local-density approximation underestimates the band gap, the energy levels of the Zn-3d states, the band dispersion, the crystal-field splitting, the spin-orbit interaction, and location of peaks in the optical spectra. The generalized-gradient approximation slightly corrects the discrepancies with the experimental findings and it shows good agreement for the optical spectra with experimental data at energies 10-20 eV for E⊥c. Studies within the local-density approximation with the multiorbital mean-field Hubbard potential show that strong Coulomb correlations are in operation. From effective mass calculations it is found that holes are much heavier and more anisotropic than the conduction-band electrons in ZnO.     

Ab initio study of the electronic structure and the magnetic properties of polymers Co[N(CN)2]2(L) [L=pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo)] with dual μ- and μ3-[N(CN)2] bridges

The first principle within the full potential linearized augmented-plane-wave (FP-LAPW) method was applied to study the compound of Co[N(CN)₂]₂(L) [L=pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo)] with dual μ- and μ₃-[N(CN)₂]⁻ bridges. The density of states, the electronic band structure and the spin magnetic moment are calculated. The calculations reveal that these two compounds have a ferromagnetic (FM) interaction arising from the 1,5-μ- and μ₃-[N(CN)₂]⁻ bridges. The spin magnetic moment mainly comes from the Co ion with little contribution from N, O and C anions.     

Ab Initio Comparative Study of Zincblende and Wurtzite ZnO

By employing the first-principles pseudopotential plane-wave method, the physical properties of zincblende ZnO are investigated in comparison with those of the common wurtzite structure. Zincblende ZnO is predicted to be a direct gap semiconductor. Compared to the wurtzite structure, the zincblende ZnO is characterized by smaller bandgap and pressure coefficient, larger electron effective mass, increasing static dielectric constants and more covalent bonding. Furthermore, the optical properties including dielectric function and energy loss function of zincblende ZnO were obtained and analysed with some features. These aspects reveal promising applications of zincblende ZnO in optoelectronic devices.     

Propagation of light through localized coupled-cavity modes in one-dimensional photonic band-gap structures

We report on the observation of a new type of propagation mechanism through evanescent coupled optical cavity modes in one-dimensional photonic crystals. The crystal is fabricated from alternating silicon-oxide/silicon-nitride pairs with silicon-oxide cavity layers. We achieved nearly full transmission throughout the guiding band of the periodic coupled cavities within the photonic band gap. The tight-binding (TB) parameter κ is determined from experimental results, and the dispersion relation, group velocity and photon lifetime corresponding to the coupled-cavity structures are analyzed within the TB approximation. The measurements are in good agreement with transfer-matrix-method simulations and predictions of the TB photon picture. Received: 21 August 2000 / Revised version: 22 August 2000 / Published online: 9 November 2000     

First-principles electronic-structure calculation on the spin distribution and the half-metallic properties of the mixed valence iron compound Ba2F2Fe1.5S3

The first principles within the full potential linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA) approach were applied to study the new mixed valence compound Ba₂F₂Fe_1.5S₃. The density of states, the electronic band structure and the spin magnetic moment are calculated. The calculations reveal that the compound has an antiferromagnetic interaction between the Fe^III and Fe^II ions arising from the bridging S atoms, which validate the experimental assumptions that there is a low-dimensional antiferromagnetic interaction in Ba₂F₂Fe_1.5S₃. The spin magnetic moment mainly comes from the Fe^III and Fe^II ions with smaller contribution from S anion. By analysis of the band structure, we find that the compound has half-metallic property.     

First-principles study of the structural and thermodynamic properties of AsNMg3 antiperovskite

The structural and elastic properties of the antiperovskite semiconductor AsNMg₃ are investigated using the full-potential linearized augmented plane wave plus local orbital (FP-LAPW+lo) method within the generalized gradient in the frame of the density functional theory. The ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus and elastic constants are in good agreement with numerous experimental and theoretical data. Through the quasi-harmonic Debye model, in which the phononic effects are considered, we have obtained successfully the thermodynamic properties such as the thermal expansion coefficient, Debye temperature and specific heats in the whole pressure range from 0 to 30 GPa and temperature range from 0 to 1200 K.