Selective fluorination of m-tyrosine by OF2

Fluorine-18 labeled aromatic amino acids are routinely used as tracers in positron emission tomography (PET) to study in vivo metabolic processes. The most versatile method for the production of such radiotracers is electrophilic fluorination of the aromatic amino acid with [¹⁸F]F₂, which is most commonly produced by the gas-phase nuclear reaction ¹⁸O(p, n)¹⁸F. Although [¹⁸F]F₂ is the major product, considerable amounts of [¹⁸F]OF₂ (up to 20%) are also produced. Electrophilic fluorination reactions of l-phenylalanine, 3-nitro-l-tyrosine, 4-nitro-dl-phenylalanine, 3,4-dihydroxyphenyl-l-alanine (l-DOPA), 3-O-methyl-l-DOPA, 3,4-dimethoxy-l-phenylalanine, p-tyrosine and o-tyrosine in H₂O and of m-tyrosine in anhydrous HF (aHF), CF₃SO₃H, CF₃COOH, CH₃COOH, HCOOH and H₂O using OF₂ were investigated. Although F₂ is an efficient fluorinating agent in aHF, electrophilic fluorination reactions using OF₂ were shown to be most efficient in less acidic media such as H₂O. In addition, and contrary to reports that OF₂ and F₂ have similar reactivities, m-tyrosine was the only aromatic system studied that was fluorinated by OF₂ and this was optimum in H₂O for the fluorinated m-tyrosine isomers (total yield, 4.35 ± 0.04%). The presence of [¹⁸F]OF₂ byproduct has no significant impact on the fluorination of aromatic amino acids investigated in this study and the subsequent production of their corresponding ¹⁸F-labeled radiotracers for patient use.     

Direct fluorination—Useful tool to enhance commercial properties of polymer articles

Fundamental features and industrial applications of the direct fluorination of polymers are reviewed. Fundamental features of the direct fluorination of a set of polymers, such as polystyrene, polyethyleneterephthalate, poly(2,6-dimethyl-1,4-phenylene oxide), PMMA, LDPE (two types), HDPE (six types), polyvinyltrimethylsilane, poly(4-methyl-pentene-1), polyimide Matrimid 5216^®, polysulfones, polyetheretherketone, polycarbonatesiloxane, polysulphone-polybuthadiene block-copolymers, polypropylene, PVF, PVDF, etc. are described. Influence of composition of the fluorinating mixture (F₂-He-N₂-O₂-HF), fluorine partial pressure, temperature and fluorination duration, on the rate of formation of the fluorinated layer and the chemical composition, density, refraction index, surface energy, gas separation properties and friction coefficient of fluorinated layer have been investigated. Processes of formation and termination of long-living and short-living radicals and grafting of acrylonitrile to fluorinated polymers have been studied. Industrial applications of the direct fluorination to enhance the commercial properties of polymeric goods, such as separation factor of polymeric membranes for gas separation, barrier properties of polymer vessels, pipes and packagings, adhesion, printability, wetting and transparency in visible and IR are reviewed.     

Fluorination rates of polyolefins as a function of structure and gas atmosphere

Polyolefins and fluoropolymers were reacted with elemental fluorine under carefully controlled conditions in a thermobalance adapted to be compatible with fluorine gas. The fluorination reactions were monitored by measuring the mass increase as a result of hydrogen substitution by fluorine. The mass increase was directly proportional to the square root of the fluorination time, which indicates that fluorine gas diffusion to the unreacted surface is the rate determining step. The fluorination rate was increased by increasing the fluorine concentration and the fluorination temperature. The fluorination rate is higher when nitrogen rather than helium is used as diluting gas. The fluorination rate for the reaction in which CO₂ is used as diluting gas is the same as during fluorination with nitrogen as diluting gas, while the presence of oxygen dramatically decreased the fluorination rate. Oxygen is incorporated during fluorination with oxygen as diluting gas, while no functionalization was observed when CO₂ was employed as diluting gas. The effect of polymer structure on fluorination was studied. Poly(vinylfluoride) gained mass during fluorination, while no reaction was observed for poly(vinylidenefluoride). The reaction rate for polypropylene was higher than that of polyethylene. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Synthesis and structural investigation of a new oxide fluoride of composition Ba2SnO2.5F3·xH2O (x≈0.5)

The preparation of a new oxide fluoride of composition Ba₂SnO_2.5F₃·xH₂O (x≈0.5) from the low-temperature (240 °C) reaction between Ba₂SnO₄ and ZnF₂ is reported. X-ray and neutron powder diffraction showed fluorination to result in a significant enlargement along the c-axis (by ca. 3 Å) of the unit cell of the precursor oxide. A structural model based on the perovskite-related K₂NiF₄-type structure of this oxide is proposed in which there is direct replacement of oxygen in octahedral SnO₆ units by fluorine, as well as the presence of F^- at interstitial sites between BaO rock salt layers. Atomistic computer modelling indicates that apical fluorine substitution is favoured. The structural model is supported by the results of ¹⁹F and ¹¹⁹Sn MAS NMR spectroscopy as well as tin K- and barium K-edge EXAFS. Thermal analysis revealed the presence of water in the synthesized material and this is assigned to interstitial sites. ¹¹⁹Tin Mössbauer spectroscopy and tin K-edge XANES are consistent with enhanced withdrawal by substituted fluorine of electron density from Sn⁴⁺.     

Solid-state NMR and EPR study of fluorinated carbon nanofibers

Carbon nanofibers were fluorinated in two manners, in pure fluorine gas (direct fluorination) and with a fluorinating agent (TbF₄ during the so-called controlled fluorination). The resulting fluorinated nanofibers have been investigated by solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR). This underlines that the fluorination mechanisms differ since a (CF)_n structural type is obtained, whatever the temperature, with the controlled reaction, whereas, during the direct process, a (C₂F)_n type is formed over a wide temperature range. Through a careful characterization of the products, i.e. density of dangling bonds (as internal paramagnetic centers), structural type (acting on molecular motion) and specific surface area (related to the amount of physisorbed O₂), the effect of atmospheric oxygen molecules on the spin-lattice nuclear relaxation has been underlined.     

Fluorination effect of activated carbon electrodes on the electrochemical performance of electric double layer capacitors

The surface of phenol-based activated carbon (AC) was fluorinated at room temperature with different F₂:N₂ gas mixtures for use as an electrode material in an electric double-layer capacitor (EDLC). The effect of surface fluorination on EDLC electrochemical performance was investigated. The specific capacitance of the fluorinated AC-based EDLC was measured in a 1 M H₂SO₄ electrolyte, in which it was observed that the specific capacitances increased from 375 and 145 F g⁻¹ to 491 and 212 F g⁻¹ with the scan rates of 2 and 50 mV s⁻¹, respectively, in comparison to those of an unfluorinated AC-based EDLC when the fluorination process was optimized via 0.2 bar partial F₂ gas pressure. This enhancement in capacitance can be attributed to the synergistic effect of increased polarization on the AC surface, specific surface area, and micro and mesopore volumes, all of which were induced by the fluorination process. The observed increase in polarization was derived from a highly electronegative fluorine functional group that emerged due to the fluorination process. The increased surface area and pore volume of the AC was derived from the physical function of the fluorine functional group.     

New synthesis methods for fluorinated carbon nanofibres and applications

Several new synthesis methods of fluorinated carbon nanofibres, such as controlled fluorination using fluorinating agent (TbF₄ or XeF₂), or assisted fluorination under UV and gamma irradiation, are reviewed and compared with the direct fluorination using undiluted fluorine gas. The results highlight the different fluorination mechanisms for the direct fluorination and the new methods. The other advantage of those alternative fluorination routes is the possibility to provide fine tuning of the fluorination level, i.e. from F/C atomic ratio close to zero, as a functionalization, to the unity (CF₁) according to the required application, electrochemical or tribological. Two applications are described in this paper as a function of the fluorine content: protection against ozonation and use as solid lubricants.     

Pd(PPh3)4-catalyzed direct ortho-fluorination of 2-arylbenzothiazoles with an electrophilic fluoride N-fluorobenzenesulfonimide (NFSI)

An efficient protocol was developed for regio-selective Pd-catalyzed direct ortho-fluorination of 2-arylbenzo[d]thiazoles using N-fluorobenzenesulfonimide (NFSI) as the F⁺ source, and l-proline as the crucial promoter. The present method offered a practical route to synthesize valuable fluorinated products, which are of potential importance in the pharmaceutical and agrochemical industries.     

Effect of surface fluorination and conductive additives on the electrochemical behavior of lithium titanate (Li4/3Ti5/3O4) for lithium ion battery

Effect of surface fluorination and conductive additives on the charge/discharge behavior of lithium titanate (Li_4/3Ti_5/3O₄) has been investigated using F₂ gas and vapor grown carbon fiber (VGCF). Surface fluorination of Li_4/3Ti_5/3O₄ was made using F₂ gas (3 × 10⁴ Pa) at 25-150 °C for 2 min. Charge capacities of Li_4/3Ti_5/3O₄ samples fluorinated at 70 °C and 100 °C were larger than those for original sample at high current densities of 300 and 600 mA/g. Optimum fluorination temperatures of Li_4/3Ti_5/3O₄ were 70 °C and 100 °C. Fibrous VGCF with a large surface area (17.7 m²/g) increased the utilization of available capacity of Li_4/3Ti_5/3O₄ probably because it provided the better electrical contact than acetylene black (AB) between Li_4/3Ti_5/3O₄ particles and nickel current collector.     

Modification of ultra‐high‐molecular weight polyethylene by various fluorinating routes

Chemical–physical properties of ultra‐high‐molecular weight polyethylene (UHMWPE) treated by direct fluorination, direct fluorination accompanied with UV irradiation, by XeF₂ and by TbF₄, were tested by FTIR spectroscopy, visible spectroscopy, 19F and 13C NMR, scanning electron microscopy, XRD, and EPR. Surface energy measurements were carried out. The direct fluorination of UHMWPE is a diffusion‐controlled process, but treatment with XeF₂ is a kinetically controlled one. Direct fluorination and direct fluorination accompanied with UV irradiation results mainly in a formation of ? CF₂? groups. On the contrary, ? CHF? groups are prevailing in UHMWPE treated with XeF₂ and TbF₄. Surface texture of UHMWPE treated with XeF₂ and with F₂ is quite different. Direct fluorination results in a higher polarity of the polymer surface when compared with treatment with XeF₂. For the case of direct fluorination, both long‐lived peroxy and fluoroalkylradicals are formed. For the case of treatment with XeF₂, only fluoroalkylradicals were detected. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49:3559–3573, 2011     

Poly(vinylidene fluoride) as a reagent for the synthesis of K2NiF4-related inorganic oxide fluorides

In this paper we report an improved route to the synthesis of K₂NiF₄-related inorganic oxide fluorides, such as Sr₂TiO₃F₂ and Ca₂CuO₂F₂ using low-temperature fluorination of precursor oxides with poly(vinylidene fluoride). Use of this fluorinating agent results in high quality samples, without SrF₂ or CaF₂ or other impurities, which are commonly seen for alternative fluorination routes.     

Specific F binding to phenyl ring of aromatic polymers

Most of the hydrogels deswell more remarkably in F⁻ containing solutions than in other monovalent anion containing solutions. However, significant deswelling followed by abnormal reswelling of polymer gel in KF solutions with increasing F⁻ concentration was observed in a series of polymer gels consisted of phenyl rings, for instance, poly(styrene sulfonic acid) (PSSA), hydroxypropyl methylcellulose phthalate (HPMCP) and poly(4-vinyl phenol) (P4VPh) gel. Driving force of this phenomenon was studied to reveal the specific interactions involved in the aqueous systems of aromatic polymers. Elemental analysis and XPS results suggest that F⁻ is embedded to the gel by the physical adsorption of KF, as well as the interactions between phenyl ring and F⁻. Further theoretical calculations revealed that the interaction may be (phenyl)CH?F⁻(H₂O)_n interaction, which is stronger than (phenyl)CH?(H₂O)_n hydrogen bond. This kind of interaction decreases with the increasing water number and it is invalid when the surrounding water number is more than 5 for the phenol-F⁻(H₂O)_n system. Therefore, we conclude that F⁻ could bind to phenyl ring via such (phenyl)CH?F⁻(H₂O)_n interaction in solutions with low hydrophilicity. The strong polarization effect of F⁻ and (phenyl)CH?F⁻(H₂O)_n interaction are two important driving forces for the reswelling of gels.     

The investigation of fluorination reaction of p-substituted benzenesulfonimides with fluorine–nitrogen mixed gas to synthesize NFSI analogues

This paper studied the fluorination reaction of p-substituted benzenesulfonimides with diluted elemental fluorine to synthesize N-fluoro-benzenesulfonimide (NFSI) analogues. Several synthetic methods were compared and we found that, for many p-substituted benzenesulfonimides, the fluorination of their sodium salts with 10% F₂–N₂ mixed gas in acetonitrile at room temperature could afford NFSI analogues in moderate to good yields.     

Selective formation of C60F18(g) and C60F36(g) by reaction of [60]fullerene with molecular fluorine

Fluorination of C₆₀(s), C₆₀(s)-MnF₂(s), C₆₀(s)-NiF₂(s) and C₆₀(s)-MnF₃(s) mixtures has been studied by Knudsen cell mass spectrometry with admission of molecular fluorine. The fluorination is selective when fullerene reacts with the fluorine chemisorbed on the MnF₂ surface. When the MnF₂ content in the initial mixture is at least 90 mol% both C₆₀F₁₈ and C₆₀F₃₆ are selectively formed. Under certain conditions, mixtures predominantly containing one of three compounds C₆₀F₃₈, C₆₀F₄₀, and C₆₀F₄₂ can be obtained. A consecutive change of the main fluorination products (C₆₀F₁₈ and C₆₀F₃₆) takes place at constant temperature (720 K) and on fluorine admission. A quantitative explanation of this fact is given. Selective fluorination of C₆₀(s) by molecular fluorine is compared with solid-phase fluorination using MnF₃(s) as a fluorinating agent.     

V2Cu3Ga8, Mo2Cu3Ga8 and W2Cu3Ga8—New compounds with a novel order variant of a bcc packing and motifs of self-similarity

Single crystals of the new compounds TM₂Cu₃Ga₈ (TM=V, Mo, W) were synthesised from the elements. Structure determinations of the isotypic compounds (cI104, space group , Z=8; Mo₂Cu₃Ga₈: a=11.9171(10) Å, 613 refl., 23 param., R₁(F)=0.022, wR₂(F²)=0.047; W₂Cu₃Ga₈: 11.9248(8) Å, 346 refl., 23 param., R₁(F)=0.048, wR₂(F²)=0.086; V₂Cu₃Ga₈: 11.7861(14) Å, 374 refl., 24 param., R₁(F)=0.033, wR₂(F²)=0.081) showed a new cubic structure type which can be classified as an ordered defect variant of a bcc packing with a^′=4a: [(TM)₂(Cu)₃(□)₃][Ga₈]. The coordination polyhedra of the transition metals consist of Ga₈-cubes with 3 sides capped by Cu leading to coordination number 11. The arrangement of the TMGa₈Cu₃-polyhedra is in a way they form itself a 3-fold capped cube. All compositions were confirmed by EDX measurements.     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

Dual-color upconversion fluorescence and aptamer-functionalized magnetic nanoparticles-based bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus

A sensitive luminescent bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus was developed using aptamer-conjugated magnetic nanoparticles (MNPs) for both recognition and concentration elements and using upconversion nanoparticles (UCNPs) as highly sensitive dual-color labels. The bioassay system was fabricated by immobilizing aptamer 1 and aptamer 2 onto the surface of MNPs, which were employed to capture and concentrate S. Typhimurium and S. aureus. NaY_0.78F₄:Yb_0.2,Tm_0.02 UCNPs modified aptamer 1 and NaY_0.28F₄:Yb_0.70,Er_0.02 UCNPs modified aptamer 2 further were bond onto the captured bacteria surface to form sandwich-type complexes. Under optimal conditions, the correlation between the concentration of S. Typhimurium and the luminescent signal was found to be linear within the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9964), and the signal was in the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9936) for S. aureus. The limits of detection of the developed method were found to be 5 and 8 cfu mL⁻¹ for S. Typhimurium and S. aureus, respectively. The ability of the bioassay to detect S. Typhimurium and S. aureus in real water samples was also investigated, and the results were compared to the experimental results from the plate-counting methods. Improved by the magnetic separation and concentration effect of MNPs, the high sensitivity of UCNPs, and the different emission lines of Yb/Er- and Yb/Tm-doped NaYF₄ UCNPs excited by a 980 nm laser, the present method performs with both high sensitivity and selectivity for the two different types of bacteria.     

New reprocessing system for spent nuclear reactor fuel using fluoride volatility method

Our proposed spent nuclear fuel reprocessing technology named FLUOREX, which is a hybrid system using fluoride volatility and solvent extraction, meets the requirements of the future thermal/fast breeder reactors (coexistence) cycle. We have been done semi-engineering and engineering scale experiments on the fluorination of uranium, purification of UF₆, pyrohydrolysis of fluorination residues, and dissolution of pyrohydrolysis samples in order to examine technical and engineering feasibilities for implementing FLUOREX. We found that uranium in spent fuels can be selectively volatilized by fluorination in the flame type reactor, and the amount of uranium volatilized is adjusted from 90% to 98% by changing the amount of F₂ supplied to the reactor. The volatilized uranium is purified using UO₂F₂ adsorber for plutonium and purification methods such as condensation and chemical traps for fission products provide a decontamination factor of over 10⁷. Most of the fluorination residues that consist of non-volatile fluorides of uranium, plutonium, and fission products are converted to oxides by pyrohydrolysis at 600-800 °C. Although some fluorides of fission products such as alkaline earth metals and lanthanides are not converted completely and fluorine is discharged into the solution, oxides of U and Pu obtained by pyrohydrolysis are dissolved into nitric acid solution because of the low solubility of lanthanide fluorides. These results support our opinion that FLUOREX has great possibilities for being a part of the future spent nuclear fuel cycle system.     

Influence of fluorination on the characterization of fluorotelomer-based acrylate polymers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The relative degree of fluorotelomer-based acrylate polymers (FTACPs) fluorination was demonstrated to influence the sample preparation protocol for matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry. A homologous series of FTACPs were synthesized from fluorotelomer and hydrocarbon acrylates of different chain lengths, which varied the ratio of perfluorinated to hydrogenated carbons (R_F/R_H). The solubility of FTACPs in tetrahydrofuran (THF) and chloroform was observed to decrease for highly fluorinated FTACPs (R_F/R_H > 0.5) promoting FTACP aggregation. No dependence on the degree of fluorination was observed for the solubility of FTACPs in the fluorinated solvents α,α,α-trifluorotoluene (TFT) or dichloropentafluoropropanes (HCFC-225). For FTACPs with a low degree of fluorination such as poly(8:2 FTAC-co-HDA) (R_F/R_H = 0.375), MALDI-ToF analysis was successful using a conventional sample preparation protocol with THF, and dithranol (Dith) matrix. Conversely, the poor solubility of the highly fluorinated poly(8:2 FTAC-co-BA) (R_F/R_H = 1.5) in THF resulted in mass discrimination. Several fluorinated sample preparation protocols were evaluated for poly(8:2 FTAC-co-BA) using TFT and HCFC-225, and decafluoroazobenzene (DFAB) or 2-[(2E)-3-(4-tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile (DCTB) matrices. The high volatility of HCFC-225 decreased FTACP pooling during solvent evaporation in comparison to the less volatile TFT, and improved the quantity of detectable signals. MALDI-ToF analysis of poly(8:2 FTAC-co-BA) in a 95:5 HCFC-225:methanol with DCTB being the best sample preparation protocol for highly fluorinated FTACPs in this study producing the highest number of observable signals. Employing a fluorinated sample preparation offers the capability of analyzing other highly fluorinated polymers that are not compatible with conventional sample preparations.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.