Synthesis and characterization of partially fluorinated ethers

A series of partially fluorinated ethers PFE-m,n with general formula F(CF₂)_mCH₂CH₂O(CH₂)_nH (m = 4, 6, 8 and n = 2, 3, 5, 8, 14, 18, 21) has been synthesized and characterized. The present work aimed to investigate the synthesis of PFE-m,n and evaluate some of their fundamental physico-chemical properties such as: specific gravity, refractive index, viscosity, solid-solid transitions, solubility and amphiphile surface activity in a variety of solvents. Further, a comparison between PFE-m,n and the well known semifluorinated n-alkanes F(CF₂)_m-(CH₂)nH (FHm, n) with the same value of the m/n ratio have been reported.     

Synthesis and properties of gemini-type hydrocarbon-fluorocarbon hybrid surfactants

Gemini-type hybrid surfactants with two fluorocarbon chains connected through a hydrocarbon spacer, F(CF₂)_m(CH₂)₂CH(OSO₃Na)(CH₂)_nCH(OSO₃Na)(CH₂)₂(CF₂)_mF [Fm(Hn)FmOS, m = 4, 6; n = 5, 6, 7, 8)], were synthesized and their surface chemical properties were examined with the aim to have highly functional and highly water-soluble fluorinated surfactants when compared with the conventional fluorinated surfactants. Comparisons of the surface chemical properties of the synthesized gemini-type hybrid surfactants with those of monounit-type hybrid surfactants, F(CF₂)_m(CH₂)₂CH(OSO₃Na)(CH₂)_nH [FmEHnOS, m = 4, 6; n = 3, 5)], revealed that gemination causes a remarkable lowering (about 1/100) in cmc value while it produces little changes in Krafft point (below 0 °C) and surface tension at cmc (γ_cmc).     

Novel perfluoroalkylated oligo(oxyethylene) methyl ethers with high hemocompatibility and excellent co-emulsifying properties for potential biomedical uses

Two series of novel perfluoroalkylated amphiphilic compounds were synthesized from monomethyl ethers of mono-, di- and tri-(oxyethylene) glycols. The first series CH₃(OCH₂CH₂)_nOCH₂CH(OH)CH₂-CF₂(CF₂CF₂)_nCF₃ (n = 1-3) bearing the hydroxy group at the spacer between hydrophilic and hydrophobic parts was prepared by the reactions of the monomethyl ethers with 2-(perfluoroalkylmethyl)oxiranes in 76-97% yields. The second series CH₃(OCH₂CH₂)_nOCH₂CH₂CH₂-CF₂(CF₂CF₂)_nCF₃ (n = 1-3) possessing the non-hydroxylated spacer was synthesized from allyl methyl ethers of oligo(oxyethylene) glycols using radical additions of perfluoroalkyl iodides and subsequent selective reductions of the C-I bond in the adducts in overall yields of 23-69%. Some of the novel amphiphilic compounds displayed very low hemolytic activity to erythrocytes and excellent co-emulsifying properties on testing on perfluorodecalin/Pluronic F-68 microemulsions. 1-O-(2-Hydroxy-4,4,5,5,6,6,7,7,8,8,9,9,9-tridecafluorononyl)-d-xylitol was prepared by a novelized synthesis and employed as a standard compound in the testing.     

sp C-H bond functionalization of methyl n-alkyl ketones [MeCOCnH2n+1 (n = 6-8)] as a novel method for the one-pot regioselective synthesis of ‘bifunctional alkanes’ with remote functional groups

Selective one-pot functionalization of methyl n-alkyl ketones, C_nH_2n+1COMe (n = 6-8) involving C-sp³-H bond cleavage with CO and various nucleophilic substrates [ⁱPrOH, BuCH(Et)CH₂OH, CF₃CH₂OH, (CF₃)(Me)CHOH, H(CF₂)₂CH₂OH, HCCCH₂OH, furan, thiophene, and anisole] in the presence of the superelectrophilic system CBr₄·2AlBr₃ has been performed for the first time.     

Novel generation ponytails in fluorous chemistry: Syntheses of primary, secondary, and tertiary (nonafluoro-tert-butyloxy)ethyl amines

(Nonafluoro-tert-butyloxy)ethyl tosylate 4 was prepared in 65% yield from nonafluoro-tert-butanol 1 using commercially available reagents. Further reaction of 4 with HNR¹R² (R¹ = R² = H, CH₃; R¹ = H, R² = CH₃, (CH₂)₃C₈F₁₇, CH₂CH₂OC(CF₃)₃) affords the appropriate (CF₃)₃COCH₂CH₂NR¹R² amines in 20-69% yields. Improved overall yields of [(CF₃)₃COCH₂CH₂]_3−nNR_n to 1 were obtained by the reaction of (CF₃)₃CONa 2 and (XCH₂CH₂)_3−nNR_n (X = Cl, n = 0, 1, 2, R = CH₃; X = CH₃SO₂O, n = 1, R = CH₃SO₂) nitrogen mustards and a similar reactive β-substituted ethyl amine. The title amines are mobile colorless liquids and volatile with steam. The bulky fluorous ponytail (CF₃)₃CO(CH₂)₂ displays high acidic stability and increases fluorous character almost as much as the classical straight-chain C₈F₁₇(CH₂)₃ ponytail.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

Preparation of ferrocenes with high fluorous-phase affinities

The reaction of 1,1′-bis(pentafluorophenyl)ferrocene with fluorous alkoxides having the general formula NaOCH₂(CF₂)_nCF₃ (n = 0, 2, 5, 7, and 8) afforded a series of ferrocenes of general formula {η⁵-4-[CF₃(CF₂)_nCH₂O]C₆F₄C₅H₄}₂Fe (1). The reaction of 1,1′-bis(4-tetrafluoropyridyl)ferrocene with the same fluorous alkoxides afforded a series of ferrocenes of general formula (η⁵-4-{2,6-[CF₃(CF₂)_nCH₂O]₂C₅F₂N}C₅H₄)₂Fe (2). Perfluoro(methylcyclohexane)/toluene partition coefficients increase with the number (2 or 4) and length (n) of the fluorous substituent. Complexes 1a and 2a (both n = 0) were structurally characterized.     

Gels from a semifluorinated n-alkane in fluorinated solvents as a probe for intermolecular interactions

Diblock semifluorinated n-alkanes can form aggregates and gels in fluorinated solvents. We have investigated the thermal behavior of binary mixtures comprising F(CF₂)₈(CH₂)₁₆H and fluorinated solvents. The solvents were perfluorohexane, perfluoroheptane, perfluorooctane, perfluorooctyl bromide, perfluorodecalin, and perfluorotributylamine. The phase diagrams were used to calculate the activity coefficients of the two components and the main excess thermodynamic functions. The solubility and self-assembly behavior of F₈H₁₆ in the fluorinated solvents are related to the different solute–solvent dispersion interactions that depend on the polarizabilities and ionization potentials of the interacting species, and on the structural properties of the solvent.     

Fluorinated phosphorus compounds: Part 9. The reactions of bis(fluoroalkyl) phosphorochloridates with oxygen nucleophiles

Twenty nine bis(fluoroalkyl) phosphates (R_FO)₂P(O)OR were prepared in 18-75% yield by treating phosphorochloridates (R_FO)₂P(O)Cl, where R_F was HCF₂CH₂, HCF₂CF₂CH₂, H(CF₂)₄CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH and (CH₃)₂CF₃C with methanol, ethanol, propanol and isopropanol in diethyl ether in the presence of triethylamine. The bulky chloridate [(CH₃)₂CF₃CO]₂P(O)Cl reacted with methanol, ethanol and propanol, but not with isopropanol - even on heating in the presence of the catalyst 4-dimethylaminopyridine - due to steric hindrance at phosphorus. The relative reactivities of three of the chloridates decreased in the order [(CF₃)₂CHO]₂P(O)Cl > [(FCH₂)₂CHO]₂P(O)Cl > [(CH₃)₂CF₃CO]₂P(O)Cl. Also described is the synthesis of phosphates (CF₃CH₂O)₂P(O)OCH₂R, where R = CH₂Br, CH₂Cl, CH₂F and CHF₂, and diphosphates [H(CF₂)_nCH₂O]₂P(O)OCH₂(CF₂)₂CH₂OP(O)[OCH₂(CF₂)_nH]₂, where n = 1, 2 and 4.     

Thermomorphic fluorous phosphines as organocatalysts for Michael addition reactions

The fluorous phosphines P[(CH₂)_mR_fn]₃ (R_fn = (CF₂)_n−1CF₃; m/n = 2/8, 3/8, 3/10) are efficient nucleophilic catalysts of Michael addition reactions. They can be easily recycled based upon their highly temperature-dependent solubilities (thermomorphism), with recovery by simple liquid/solid phase separation. The phosphonium salt formed by reaction of the nucleophilic phosphine with the α,β-unsaturated system appears to be a significant component of the catalyst rest state.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

Synthesis and characterization of fluorous (S)- and (R)-1-phenylethylamines that effect heat facilitated resolution of (±)-2-(8-carboxy-1-naphthylsulfinyl)benzoic acid via diastereomeric salt formation and study of their circular dichroism

Perfluoroalkyl- or nonafluoro-tert-butoxy-alkyl-substituted enantiopure amines having the structure PhCHCH₃(NR¹R²) [R¹ = H, CH₃; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃; R¹ = R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃] are obtained in high yields, when (S)-(−)-1-phenylethylamine is reacted with readily accessible alkylating reagents or fluorous 2° amines (R¹ = H; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃) are methylated in a Leuckart-Wallach reaction. The solubility patterns of these novel chiral amines and their hydrochlorides are qualitatively described for a broad spectrum of solvents and the fluorous partition coefficients of the free bases are determined by GC. A novel method for the resolution of enantiomers is disclosed here, which involves the use a half-equivalent of the selected resolving agent in solvent water that displays low solubility for the crystalline diastereomeric salt(s) formed even at temperatures near to its boiling point. Compound (S)-(−)-PhCHCH₃[NH(CH₂)₃C₈F₁₇] is found to satisfy all the latter conditions and successfully used for the heat facilitated resolution of the title racemic acid. The circular dichroism (CD) spectra of six novel fluorous (S)-(−)-1-phenylethylamine derivatives are measured in ethanol, trifluoroethanol and hexafluoropropan-2-ol and discussed in detail.     

New synthesis and thermal studies of palladacycloalkanes and their precursors

A series of new palladacycloalkanes of formula cis-[PdL₂(CH₂)_n] (9. n = 6, L = PPh₃; 10. n = 6, L₂ = dppe; 11. n = 8, L = PPh₃; 12. n = 8, L₂ = dppe) have been prepared by two routes. In the first route, the precursor bis(1-alkenyl) complexes cis-[PdL₂((CH₂)_nCHCH₂)₂] (1. n = 2, L = PPh₃, 2. n = 2, L₂ = dppe, 3. n = 3, L = PPh₃, 4. n = 3, L₂ = dppe) were allowed to react with Grubb’s 2nd generation catalyst to give the palladacycloalkenes, cis-[PdL₂(CH₂)_nCHCH(CH₂)_n] (5. n = 2, L = PPh₃, 6. n = 2, L₂ = dppe, 7. n = 3, L = PPh₃, 8. n = 3, L₂ = dppe), which were then hydrogenated to the palladacycloalkanes, 9-12. In the second route, the di-Grignard reagents BrMg(CH₂)_nMgBr (n = 6, 8) were reacted with the palladium complex [PdCl₂(COD)] followed by immediate ligand displacement to form the respective palladacycloalkanes 10 and 12. The complexes obtained were characterized by a range of spectroscopic and analytical techniques. Thermal decomposition studies were carried out on the palladacycloalkanes 9-12 and the main organic products shown to be 1-alkenes and 2-alkenes.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Synthesis and repellent properties of vinylidene fluoride-containing polyacrylates

Fluorinated polyacrylats with side group containing vinylidene fluoride (VDF) units (CF₃(CF₂)_n (CH₂CF₂)_m, n = 3, 5; m = 1, 2) were successfully synthesized. The water and oil repellency properties of these polymers are similar to those of fluorinated polyacrylate with side group containing long perfluorooctyl group (CF₃(CF₂)₇). The thermal telomerization of CF₃(CF₂)₅I and CF₃(CF₂)₃I with vinylidene fluoride (VDF) provided CF₃(CF₂)₅CH₂CF₂I (1b) and CF₃(CF₂)₃CH₂CF₂CH₂CF₂I (1c), respectively. The addition of 1b with ethylene followed by hydrolysis gave CF₃(CF₂)₅CH₂CF₂CH₂CH₂OH (2b). Treatment of 1c with ethyl vinyl ether in the presence of Na₂S₂O₄ followed by reduction produced CF₃(CF₂)₃CH₂CF₂CH₂CF₂CH₂CH₂OH (2c). Fluoroacrylates 3b-d were prepared by acrylation of the corresponding fluoroalcohols 2b-d. The semi-continuous process emulsion co-polymerization of 3a-d with octadecyl acrylate and 2-hydroxylethyl acrylate initiated by (NH₄)₂S₂O₈ in the presence of a mixture emulsifiers of polyoxyethylene(10)nonyl phenyl ether (TX-10) and sodium lauryl sulfate provided stable latexes 4a-d, respectively. The water and oil repellency properties of 4b (R_f: CF₃(CF₂)₅CH₂CF₂) and 4c (R_f: CF₃(CF₂)₃CH₂CF₂CH₂CF₂) containing vinylidene fluoride (VDF) units were similar to those of 4a (R_f: CF₃(CF₂)₇) containing long perfluoroalkyl group and much better than those of polymer 4d (R_f: CF₃(CF₂)₃) with short perfluoroalkyl chain. Thus, polyacrylates containing vinylidene fluoride units showed promising aspects as the alternatives to the currently used water and oil repellent agents with long perfluoroalkyl chains.     

Fluorous modification of 2,2′-bipyridine

A series of 2,2′-bipyridines featuring fluorinated alkyl groups [(CH₂)₃(CF₂)_xCF₃: x = 0, (1); 5, (2); 7, (3); 9 (4)] appended in the 4 and 4′ positions have been prepared. 1-4 were characterized by spectroscopy and physical methods including partition coefficient (biphase: perfluoromethylcyclohexane/toluene) and cyclic voltammetry (THF). Ab-initio calculations of vertical ionization potentials (VIPs) for 1-4 confirm the insulating role of the methylene spacers as the electrochemical reduction potentials of 1-4 are almost identical to that of 2,2′-bipyridine. Calculations for (CH₂)_nCF₃ derivatives (n = 0-10) describe a limit for impact of the CF₃ group through 9-10 methylenes. From both physical and theoretical data fluorinated alkyl groups of the formula (CH₂)₃(CF₂)_xCF₃ [x = 0-9] are inductively equivalent to a hydrogen substituent when appended to the bipyridine moiety.     

Practice of fluorous biphase chemistry: convenient synthesis of novel fluorophilic ethers via a Mitsunobu reaction

The evolution of the term fluorous is addressed first, then a concise terminology is proposed, including fluorous partition coefficient, specific fluorophilicity and fluorousness. Some examples are shown for the design of higher generation fluorophilic molecules, involving Class I to Class III ponytails. Fluorophilic ethers of the structure of ArC(CF₃)₂O(CH₂)_m(CF₂)_nF (m=1, n=1, 7; m=3, n=8) are obtained in high yields, when 2-aryl-1,1,1,3,3,3-hexafluoro-propanols are reacted either with trifluoroethyl- and 1H,1H-perfluorooctyl triflates (NaH/DMF, Williamson ether synthesis) or with 3-perfluorooctyl-propanol (Ph₃P/EtO₂CNNCO₂Et/PhCF₃, Mitsunobu reaction), respectively. Fluorophilic phenol- and perfluoro-tert-butyl ethers can also be prepared effectively by the latter method. In case of higher homologues (n=7, 8) product isolation can be facilitated using fluorous extraction (C₆F₁₄/CH₃OH). Specific fluorophilicity values of target molecules are estimated using a 2D method and compared with experimentally determined ones.     

Explored routes to unknown polyfluoroorganyliodine hexafluorides, RFIF6

Two routes to R_FIF₆ compounds were investigated: (a) the substitution of F by R_F in IF₇ and (b) the fluorine addition to iodine in R_FIF₄ precursors. For route (a) the reagents C₆F₅SiMe₃, C₆F₅SiF₃, [NMe₄][C₆F₅SiF₄], C₆F₅BF₂, and 1,4-C₆F₄(BF₂)₂ were tested. C₆F₅IF₄ and CF₃CH₂IF₄ were used in route (b) and treated with the fluoro-oxidizers IF₇, [O₂][SbF₆]/KF, and K₂[NiF₆]/KF. The observed sidestep reactions in case of routes (a) and (b) are discussed. Interaction of C₆F₅SiX₃ (X = Me, F), C₆F₅BF₂, 1,4-C₆F₄(BF₂)₂ with IF₇ gave exclusively the corresponding ring fluorination products, perfluorinated cyclohexadiene and cyclohexene derivatives, whereas [NMe₄][C₆F₅SiF₄] and IF₇ formed mixtures of C₆F_nIF₄ and C₆F_nH compounds (n = 7 and 9). CF₃CH₂IF₄ was not reactive towards the fluoro-oxidizer IF₇, whereas C₆F₅IF₄ formed C₆F_nIF₄ compounds (n = 7 and 9). C₆F₅IF₄ and CF₃CH₂IF₄ were inert towards [O₂][SbF₆] in anhydrous HF. CF₃CH₂IF₄ underwent C-H fluorination and C-I bond cleavage when treated with K₂[NiF₆]/KF in HF. The fluorine addition property of IF₇ was independently demonstrated in case of perfluorohexenes. C₄F₉CFCF₂ and IF₇ underwent oxidative fluorine addition at −30 °C, and the isomers (CF₃)₂CFCFCFCF₃ (cis and trans) formed very slowly perfluoroisohexanes even at 25 °C. The compatibility of IF₇ and selected organic solvents was investigated. The polyfluoroalkanes CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB), and C₄F₉Br are inert towards iodine heptafluoride at 25 °C while CF₃CH₂Br was slowly converted to CF₃CH₂F. Especially PFP and PFB are new suitable organic solvents for IF₇.     

Synthesis of technically useful perfluorocarboxylic acids

The influence of technological parameters on the dehydroiodination of perfluoroalkylethene iodides (CF₃)₂CF(CF₂CF₂)_nCH₂CH₂I, where n = 1, 2, 3 and 4, has been investigated. The most advantageous conditions for the two-stage oxidation of (CF₃)₂CF(CF₂CF₂)_nCHCH₂, with ozone in the first stage, followed by the oxidation with hydrogen peroxide to the perfluorocarboxylic acids, were determined. The effects of temperature and time on the conversion of perfluoroalkylethenes during the oxidation with ozone were studied. In the second stage, the selectivity of transformation (of each homologue) to the perfluorocarboxylic acid in relation to the theoretical amount resulting from a quantity of perfluoroalkylethene used and the conversion of perfluoroalkylethene in the temperature range of 10-80 °C has been determined.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].