Triosmium compounds containing the oxametallacycle [Os(CO)3{C(R)CHC(O)CHC(H)C5H4FeC5H5}] moiety. Synthesis and electrochemical studies

The compounds [Os₃(CO)₁₀{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe (C₅H₅)}] (2), [Os₃(CO)₉{μ,η³-(SCH₂CH₂SCCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}] (3) and [Os₃(CO)₈{μ₃,η²-{CCHC(O)CHCH(C₅H₄)Fe(C₅H₅)}(SCH₂CH₂S)}] (4) have been obtained by rupture of S-C bonds in the ketene dithioacetal [C₅H₅FeC₅H₄CHCHC(O)CHC(SCH₂CH₂S)], in their reaction with the activated cluster [Os₃(CO)₁₀(NCMe)₂]. The presence of an oxametallacycle in these derivatives has been confirmed by an X-ray diffraction analysis. The electrochemical study has indicated the ability of these compounds to modify the electrode surfaces.     

Preparation of E-(1,2-difluoro-1,2-ethenediyl)bis(tributylstannane)

Chlorotrifluoroethene is converted in situ to [F₂CCFSiMe₃]. The crude [F₂CCFSiMe₃] solution is reduced with lithium aluminum hydride to (HFCCFSiMe₃), which (without isolation) is converted to (Z)-HFCCFSnBu₃. Subsequent metallation and trapping of the vinyllithium reagent with Bu₃SnCl gives (E)-Bu₃SnCFCFSnBu₃ in 73% overall yield. Only two isolation steps are required and the use of Me₃SiCl and F₂CCFCl provides a cheap, economical route to this useful synthon.     

The first evidence for a transient stibaallene ArSbCCR2

Dechlorofluorination of ArSb(F)-C(Cl)CR₂ (CR₂ = fluorenylidene, Ar = 2,4,6-tri-tert-butylphenyl) by tert-butyllithium afforded a 3,4-bis(fluorenylidene)-1,2-distibacyclobutane. The formation of the latter probably involves the transient stibaallene ArSbCCR₂ followed by a head-to-head dimerization via two SbC double bonds. Molecular orbital calculations at the ab initio and DFT levels support the head-to-head dimerization of ArSbCCR₂ with the formation of a 1,2-distibacyclobutane.     

Thermal gas-phase reaction of perfluorobuta-1,3-diene with NO2

The reaction of NO₂ with perfluorobuta-1,3-diene, CF₂CFCFCF₂ (C₄F₆), has been studied at 312.9, 323.0, 333.4, 396.0 and 418.0 K, using a conventional static system. The products formed in the temperature range 312.9-333.4 K were CF₂CFCF(NO₂)CF₂(NO₂) (I), CF₂(NO₂)CFCFCF₂(NO₂) (II), CF₂CFCF(NO₂)C(O)F (III) and CF₂(NO₂)CFCFC(O)F (IV) and FNO. The formation of these compounds was detected performing infrared and Raman spectra. The infrared spectrum shows a band at 1785 cm⁻¹, characteristic to the terminal -CFCF₂ group and the Raman spectrum shows a band located at 1733 cm⁻¹, corresponding to -CFCF- group. It indicates, that in this temperature range, NO₂ attacks initially only one double bound of CF₂CFCFCF₂. Since the intermediate radical CF₂CFCFCF₂(NO₂) formed in this process is allylic in nature, so there is no isomerization involved in this process, but rather the allylic radical is able to add the second NO₂ either to CF₂ or CFCF₂(NO₂) end, forming the corresponding products. At 396.0 and 418.0 K different products were observed: CF₂(NO₂)CF(NO₂)C(O)F (V), NO, CF₃C(O)F, C(O)F₂ and traces of epoxide of tetrafluoroethene, showing that, at these temperatures, both double bonds are attacked by NO₂ and detachment of CF₂ group is produced. The mechanisms consistent with experimental results in the temperature range 312.9-333.4 and at 396.0 and 418 K are proposed.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Ferrole-type compounds containing thiophenic or thiepinic rings in the 3,4-positions of the metallacycle

The new ferrole Fe₂(CO)₆[μ-η²,η⁴-(Fc)CC{C(H)C(R)S}CC(SiMe₃)] [R = SiMe₃ (1) and R = Fc (2)] and ruthenoles Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(H)}CC(Fc)] 3 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC(SCCFc)C(H)C(Fc)] 4, have been obtained from the reactions of M₃(CO)₁₂ (M = Fe, Ru) and FcCCSCCSiMe₃ through S-C bond activations and C-C coupling reactions. Thermolysis of Ru₂(CO)₆[μ₃-η²,η⁴,η³-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃}Ru(CO)₃}CC(Fc)] alone and in the presence of HCCFc, yielded the compounds Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)}CC(Fc)] 5 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)C(H)C(Fc)}CC(Fc)] 6, respectively. The crystal structures of the compounds 1, 3, 4 and 6 are reported.     

Nickel alkynyl and allenylidene complexes: Synthesis and properties

Copper-catalyzed reaction of [Cp(PPh₃)NiCl] with the terminal alkynes H-CC-C(O)R (R = O-Menthyl, NMe₂, Ph) yields the alkynyl complexes [Cp(PPh₃)Ni-CC-C(O)R]. Subsequent O-methylation with either [Me₃O]BF₄ or MeSO₃CF₃ affords cationic allenylidene complexes, [Cp(PPh₃)NiCCC(OMe)R]⁺X¯ (X = BF₄, SO₃CF₃). N-Alkylation of Cp(PPh₃)Ni-pyridylethynyl complexes likewise gives cationic allenylidene complexes. [Cp(PPh₃)Ni-CC-C(CH)₄N] adds BF₃ at nitrogen. Modification of the ligand sphere in these nickel allenylidene complexes is possible by replacing PPh₃ by PMe₃ in the alkynyl complex precursors. The first allenylidene(carbene)nickel cation, [Cp(SIMes)NCCC(OMe)NMe₂]⁺, is accessible by successive reaction of [Cp(SIMes)NiCl] with H-CC-C(O)NMe₂ and [Me₃O]BF₄. By the analogous sequence an allenylidene complex containing the chelating (diphenylphosphanyl)ethylcyclopentadienyl ligand can be prepared. DFT Calculations were carried out on the allenylidene complex cation [Cp(PPh₃)NiCCC(OMe)NMe₂]⁺ and on its precursor, the alkynyl complex [Cp(PPh₃)Ni-CC-C(O)NMe₂]. Based on the spectroscopic data and a X-ray structure analysis the bonding in the new nickel allenylidene complexes is best represented by several resonance forms, an alkynyl resonance form considerably contributing to the overall bond.     

Protonation of manganese phosphonioallenyl complexes

The addition of phosphines to the manganese allenylidene complexes Cp(CO)₂MnCCC(Ph)R (R = H, Ph) proceeds selectively at the C_α atom to result in the α-phosphonioallenyl complexes Cp(CO)₂Mn⁻-C(⁺PR₃¹)CC(Ph)R. The protonation of the latter affords the η²-(1,2)-phosphonioallenes Cp(CO)₂Mn{η²-(1,2)-HC(⁺PR₃¹)CC(Ph)R}, rather than the phosphoniovinylcarbenes Cp(CO)₂MnC(⁺PR₃¹)-HCC(Ph)R. All complexes obtained are stereochemically rigid and do not isomerize into the η²-(2,3)-phosphonioallene isomers.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.     

Bis(amino)allenylidene complexes by displacement of the MeO group in methoxy allenylidene complexes of chromium and tungsten. Synthesis, DFT calculations and solid-state structures of new bis(amino)allenylidene complexes

Pentacarbonyl dimethylamino(methoxy)allenylidene tungsten, [(CO)₅WCCC(OMe)NMe₂] (1b), reacts with one equivalent of primary amines, H₂NR, by selectively replacing the methoxy group to give dimethylamino(amino)allenylidene complexes, [(CO)₅WCCC(NHR)NMe₂]. When the amine is used in excess both terminal groups, OMe as well as NMe₂, are replaced by the primary amino group giving [(CO)₅WCCC(NHR)₂ ]. The NHR substituent in these complexes may be modified by deprotonation with LDA followed by alkylation. The replacement of the methoxy group in 1b by a secondary amino group, NR₂, can be achieved by a stepwise process. Addition of Li[NR₂] to the C_γ atom of 1b affords an alkynyl tungstate. Subsequent OMe⁻ elimination induced by TMS-Cl/SiO₂ yields the allenylidene complexes [(CO)₅WCCC(NR₂)NMe₂]. When bidentate diamines are used instead of monoamines both substituents, OMe and NMe₂, are replaced and allenylidene complexes are formed in which C_γ constitutes part of a 5-, 6-, or 7-membered heterocycle. The reaction of [(CO)₅CrCCC(OMe)NMe₂] (1a) with diethylene triamine affords an allenylidene complex with a heterocyclic endgroup carrying a dangling CH₂CH₂NH₂ substituent. All reactions follow a strict regioselective attack of the nucleophile at C_γ and proceed with good to excellent yields. The addition of N-H to the C_αC_β bond is not observed. By applying either one of these routes nearly any substitution pattern in bis(amino)allenylidene complex can be realized.     

A well feasible and general route to (organoethynyl)difluoroboranes, RHCCBF2, and their perfluorinated analogues, RFCCBF2

A representative series of (organoethynyl)difluoroboranes RCCBF₂ (RC₄H₉, (CH₃)₃C, CF₃, C₃F₇, (CF₃)₂CF, CF₃CFCF, C₄F₉CFCF, C₆F₅) was prepared by abstraction of fluoride from the corresponding K[RCCBF₃] salts with BF₃ in appropriate solvents (1,1,1,3,3-pentafluoropropane, 1,1,1,3,3-pentafluorobutane, or dichloromethane).     

Formation of a cyclobutenylidene by cyclo-addition of an alkynyl-ruthenium complex to a cyano(alkynyl)ethene

In contrast to the usual formal [2+2]-cycloaddition reaction, (NC)₂CC{CC(SiPrⁱ₃)}₂, containing bulky alkynyl substituents, reacts with Ru(CCPh)(PPh₃)₂Cp to give the unprecedented cyclobutenylidene complex Ru{C(CN)₂C[CC(SiPrⁱ₃)]CC(SiPrⁱ₃)CPhC}(PPh₃)Cp, formed by addition of one of the CC(SiPrⁱ₃) groups to the Ru-CCPh moiety and subsequent electronic reorganisation.     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

Molecular complexes of octafluoronaphthalene with catenated chalcogen-nitrogen compounds C6H5-X-NSN-SiMe3 (X = S, Se)

Mismatched molecular 1:1 complexes of C₁₀F₈ with catenated chalcogen-nitrogen compounds C₆H₅-X-NSN-SiMe₃ (X = S, Se) were prepared and characterized by X-ray crystallography. The complexes provide examples of structurally non-rigid polyheteroatom molecules involved in non-covalent arene-polyfluoroarene π-stacking interactions. In going from homocrystals to the co-crystals, the molecular Z, E configuration of the catenated compounds changes from noticeably non-planar to perfectly planar, i.e. C₁₀F₈ acts as “molecular iron”. On the other hand, C₁₀H₈ does not produce complexes with C₆F₅-X-NSN-SiMe₃ (X = S, Se).     

Organometallic chemistry and catalysis on gold metal surfaces

As in transition metal complexes, CN-R ligands adsorbed on powdered gold undergo attack by amines to give putative diaminocarbene groups on the gold surface. This reaction forms the basis for the discovery of a gold metal-catalyzed reaction of CN-R, primary amines (R′NH₂) and O₂ to give carbodiimides (R′-NCN-R). An analogous reaction of CO, RNH₂, and O₂ gives isocyanates (R-NCO), which react with additional amine to give urea (RNH)₂CO products. The gold-catalyzed reaction of CN-R with secondary amines (HNR′₂) and O₂ gives mixed ureas RNH(CO)NR′₂. In another type of gold-catalyzed reaction, secondary amines HN(CH₂R)₂ react with O₂ to undergo dehydrogenation to the imine product, RCHN(CH₂R). Of special interest is the high catalytic activity of gold powder, which is otherwise well-known for its poor catalytic properties.     

Silicon version of enamines: Amino-substituted disilenes by the reactions of the disilyne RSiSiR (R = SiPr[CH(SiMe3)2]2) with amines

The reaction of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with secondary or primary amines produced amino-substituted disilenes R(R₂′N)SiSiHR 2a-d (R = SiⁱPr[CH(SiMe₃)₂]₂, R₂′NEt₂N (2a), (CH₂CH₂)₂N (2b), ^tBu(H)N (2c), and Ph₂N (2d)). Spectroscopic and X-ray crystallographic analyses of 2 showed that 2a-c have a nearly coplanar arrangement of the SiSi double bond and the amino group, giving π-conjugation between the SiSi double bond and the lone pair on the nitrogen atom, whereas 2d has a nearly perpendicular arrangement precluding such conjugation. Theoretical calculations indicate that π-conjugation between the π-orbital of the SiSi double bond and the lone pair on the nitrogen atom is markedly influenced by the torsional angle between the SiSi double-bond plane and the amino-group plane.     

Tertiary phosphine abstraction from a platinum(II) coordination complex with SeCN: Crystal and molecular structures of SePTA and [SePTA-Me]I · CH3OH

Reacting [PtCl(PTA)₃]Cl(PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.1^3,7]decane) with KSeCN in aqueous or MeOH medium results in the abstraction of the PTA ligands to yield SePTA. The reaction also proceeds quantitatively by direct reaction of PTA and KSeCN in water or methanol. The methylated PTA ligand, [PTA-Me]I (1-methyl-1-azonia-3,5-diaza-7-phosphatricyclo[3.3.1.1^3,7]decane iodide), reacts accordingly with KSeCN, albeit significantly slower. The crystal structure of SePTA, 1, and [SePTA-Me]I · CH₃OH, 2, revealed PSe bond distances of 2.0991(19) and 2.100(2) Å, respectively. The first order phosphorous selenium coupling constants, ¹J_P-Se (D₂O), of 722 and 788 Hz for SePTA and [SePTA-Me]I, respectively, indicates the latter is significantly less electron rich.