Preparation of fluoroalkyl end-capped oligomers/magnetite nanocomposites possessing a good dispersibility and stability

Fluoroalkyl end-capped vinylphosphonic acid cooligomers-encapsulated magnetite nanocomposites were prepared by the magnetization of aqueous ferric and ferrous ions in the presence of the corresponding fluorinated cooligomers and magnetic nanoparticles under alkaline conditions. These fluorinated cooligomers magnetic composites are nanometer size-controlled very fine particles and have a good dispersibility and stability in water and traditional organic solvents. These fluorinated nanocomposites were also applied to the surface modification of poly(methyl methacrylate) to exhibit a good oleophobicity imparted by fluorine on their surface. Fluoroalkyl end-capped 2-methacryloyloxyethanesulfonic acid oligomer-encapsulated magnetite nanocomposites and fluoroalkyl end-capped 2-acrylamide-2-methylpropanesulfonic acid oligomer-encapsulated magnetite nanocomposites were prepared in good isolated yields by the magnetization of iron chlorides in the presence of the corresponding oligomers and magnetic nanoparticles under similar conditions. Colloidal stability of these fluorinated nanocomposites thus obtained in water was demonstrated to become extremely higher than that of fluorinated vinylphosphonic acid cooligomers/magnetic nanocomposites.     

Preparation of novel fluoroalkyl-end-capped 2-acrylamido-2-methylpropanesulfonic acid cooligomeric nanoparticles containing adamantane units possessing a lower critical solution temperature characteristic in organic media

Fluoroalkyl-end-capped 2-acrylamido-2-methylpropanesulfonic acid cooligomers containing adamantyl segments were prepared by reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 3-hydroxy-1-adamantyl acrylate (Ad-HAc). These obtained fluorinated AMPS-Ad-HAc cooligomers were found to form nanometer-size-controlled fine particles not only in water but also in a large variety of traditionally organic solvents. In addition, these fluorinated cooligomeric nanoparticles showed a good dispersibility in these solvents. Interestingly, the size of these fluorinated nanoparticles is extremely sensitive to solvent changes, and an increase of the particle size was observed in the solvents, in which the dielectric constant is higher or lower. More interestingly, these fluorinated AMPS-Ad-HAc cooligomeric nanoparticles exhibited a lower critical solution temperature around 52 degrees C in an organic medium (tert-butyl alcohol).     

Synthesis and Properties of Novel Cross‐Linked Fluoroalkyl End‐Capped Oligomeric Nanoparticles Containing Adamantane Units

Fluoroalkyl end‐capped cooligomers that contain both oxime‐blocked isocyanato and hydroxyadamantyl segments are prepared by the cooligomerization of fluoroalkanoyl peroxide with the corresponding monomers under mild conditions. This fluorinated cooligomer affords new cross‐linked fluoroalkyl end‐capped cooligomeric nanoparticles that contain adamantane segments by the deprotecting reaction of oxime‐blocked isocyanato segments in cooligomers in excellent to moderate isolated yield. A variety of cross‐linked fluoroalkyl end‐capped cooligomeric nanoparticles that contain adamantane segments are also prepared by similar deprotecting reactions with this fluorinated cooligomer in the presence of adamantane‐1,5‐diol. Furthermore, we have prepared cross‐linked fluoroalkyl end‐capped cooligomers that contain oxime‐blocked isocyanato segments by the use of 2‐hydroxyethyl acrylate and poly(ethylene glycol)‐containing methacrylate monomer as comonomers, respectively. However, the deprotecting reactions of the oxime‐blocked isocyanato segments in the cooligomers do not afford the expected nanoparticles, and these cross‐linked cooligomers are found to show a gelling characteristic. The thermal stability of these cross‐linked fluorinated cooligomeric nanoparticles that contain adamantane segments increases significantly compared to that of the parent fluorinated cooligomer. More interestingly, the thermal stability of these cross‐linked fluorinated nanoparticles is almost the same as that of the fluoroalkyl end‐capped acrylic acid oligomer/SiO₂ nanocomposites (content of SiO₂ in composites: 70%). In addition, these cross‐linked fluorinated nanoparticles have been applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate) to exhibit a good oleophobicity imparted by fluorine on their surface.

     

Synthesis and applications of novel fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments: a new approach to the surface arrangement of diphenylacetylene segments on the traditional organic polymer

Fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments [R_F‐(DPMA)_x‐(Co‐M)_y‐R_F] were prepared by reaction of fluoroalkanoyl peroxide with 4‐(phenylethynyl)phenyl methacrylate (DPMA) and radical polymerizable comonomers such as N,N‐dimethylacrylamide (DMAA) and acryloylmorpholine (ACMO) under very mild conditions. Fluorinated cooligomers containing diphenylacetylene segments thus obtained exhibited a good solubility in a variety of organic solvents. These fluorinated cooligomers were also applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate) (PMMA) to exhibit not only a good surface active property imparted by fluorine but also a fluorescent characteristic related to diphenylacetylene segments on their surface. In addition, these fluorinated cooligomers could form the nanometer size‐controlled fluorinated molecular aggregates in chloroform. Interestingly, some benzenes and biphenyl (BP) derivatives could interact with these fluorinated oligomeric aggregates as guest molecules, and in particular 2‐chloro‐5‐nitrobenzotrifluoride (CNB) was most effective for enhancing the fluorescent intensity of these guest molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and properties of novel cross-linked fluoroalkyl end-capped cooligomeric nanoparticles possessing double decker-type aromatic silsesquioxane segments as core units

Cross-linked fluoroalkyl end-capped cooligomers possessing double decker-type aromatic silsesquioxane segments as core units [R_F-(Ar-SiSQ) _x -(Co-M) _y -R_F] were prepared under mild conditions by the cooligomerizations of fluoroalkanoyl peroxide with the corresponding aromatic silsesquioxane possessing bifunctional vinyl groups (Ar-SiSQ) and comonomers (Co-M) such as acryloylmorpholine (ACMO), N,N-dimethylacrylamide (DMAA) and N-(1,1-dimethyl-3-oxobutyl)acrylamide (DOBAA). Interestingly, these cross-linked fluorinated cooligomers thus obtained were found to form the nanometer size-controlled nanoparticles with a good dispersibility in a variety of solvents including fluorinated aliphatic solvents. These fluorinated cooligomeric nanoparticles were demonstrated to have red-shifted fluorescent emissions related to the presence of aromatic silsesquioxane segments, compared with that of parent aromatic silsesquioxane, indicating that each aromatic moiety in these nanoparticles can interact effectively with each other through the π–π stacking between the aromatic moieties to afford the red-shifted fluorescent emissions. These fluorinated nanoparticles were also applied to the surface modification of poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a fluorescent emission behavior related to aromatic silsesquioxane segments in nanoparticles on the modified PMMA surface. More interestingly, cross-linked R_F-(Ar-SiSQ) _x -(DOBAA) _y -R_F cooligomeric nanoparticles interacted with fluorescein to give the corresponding fluorinated cooligomeric particles/fluorescein nanocomposites in methanol. These fluorinated fluorescein nanocomposites were found to afford an extraordinarily enhanced light absorption (λ _max = 441 nm), compared with that of fluoroalkyl end-capped DOBAA oligomer [R_F-(DOBAA) _n -R_F] possessing no aromatic silsesquioxane segments.     

Preparation and properties of fluorinated carboxylic acid/silica nanocomposite-encapsulated low molecular weight compounds

Perfluoro-2-methyl-3-oxahexanoic acid/silica nanocomposites [R_F-CO₂H/SiO₂] were prepared by the sol–gel reaction of tetraethoxysilane in the presence of silica nanoparticles and the corresponding fluorinated carboxylic acid under alkaline conditions. R_F-CO₂H/SiO₂ nanocomposites were found to exhibit no weight loss in proportion to the contents of fluorinated carboxylic acid in the composites even after calcination at 800 °C. The modified glass surface treated with the R_F-CO₂H/SiO₂ nanocomposites was shown to give a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid in the composites. R_F-CO₂H/SiO₂ nanocomposites were also applied to the encapsulation of a variety of low molecular weight aromatic and aliphatic compounds such as bisphenol AF [BPAF], bisphenol A [BPA], 4,4′-biphenol [BPOH], octafluoro-4,4′-biphenol [FBPOH], 4,4′-bis(triethoxysilyl)-1,1′-biphenyl [BTSBP], 3-(trihydroxysilyl)propane-1-sulfonic acid [THSP], α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), and γ-cyclodextrin (γ-CD). Encapsulated aromatic compounds possessing acidic hydroxyl groups such as BPAF, BPA, and FBPOH in the R_F-COOH/SiO₂ nanocomposites were found to exhibit no weight loss corresponding to the contents of aromatic compounds in the composites even after calcination at 800 °C. On the other hand, encapsulated aromatic compounds possessing no acidic hydroxyl groups such as BTSBP and aliphatic compounds (THSP, α-, β-, and γ-CD) gave a clear weight loss corresponding to the contents of these compounds in the composites after calcination. In addition, the fluorinated silica nanocomposite-encapsulated these compounds were applied to the surface modification of glass to exhibit a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid on the surface.

Controlled immobilization of palladium nanoparticles in two different fluorinated polymeric aggregate cores and their application in catalysis

Fluoroalkyl end-capped betaine-type cooligomeric nanocomposites-immobilized palladium nanoparticles were prepared by the reactions of palladium chloride with sodium acetate in the presence of sodium chloride and the corresponding fluorinated cooligomers. Outer blocks of poly(2,3,4,5,6-pentafluorostyrene)-containing ABA-triblock copolymeric nanocomposites-immobilized palladium nanoparticles were prepared by the use of the corresponding block copolymers under similar conditions. TEM images showed that palladium nanoparticles can be immobilized outside the fluorinated cooligomeric nanocomposite cores; in contrast, palladium nanoparticles can be effectively immobilized inside these fluorinated ABA-triblock copolymeric nanocomposite cores. Thus, these two different fluorinated copolymers enabled the controlled immobilization of palladium nanoparticles in the fluorinated nanocomposite cores. These fluorinated nanocomposites-immobilized palladium nanoparticles were also applied to the catalysts for Suzuki-Miyaura cross-coupling reaction, and the different reactivity between these nanocomposites was observed.     

Preparation and applications of novel fluoroalkyl end‐capped oligomers/polyimide/silica nanocomposites

Fluoroalkyl end‐capped acrylic acid, N,N‐dimethylacrylamide, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide and vinyltrimethoxysilane oligomers reacted with polyamic acid possessing trimethoxysilyl groups under alkaline conditions to yield the corresponding fluoroalkyl end‐capped oligomers/polyamic acid/silica nanocomposites. These isolated fluorinated composite powders were found to afford nanometer size‐controlled fine particles with a good dispersibility and stability in water and traditional organic solvents. We succeeded in preparing new fluoroalkyl end‐capped oligomers/polyimide/silica nanocomposites by the imidization of fluorinated polyamic acid silica nanocomposites through the stepwise heating at 110 and 270°C under air atmosphere conditions. These fluorinated polyimide/silica nanocomposites thus obtained were applied to the surface modification of glass and poly(methyl methacrylate) (PMMA) to exhibit good hydro‐ and oleo‐phobic characteristics imparted by fluoroalkyl groups in the composites on their surface. In addition, the surface morphology of the modified glass treated with these fluorinated nanocomposites were analyzed by using FE‐SEM and DFM. Copyright © 2011 John Wiley & Sons, Ltd.     

Ru(bpy)_3 掺杂的核壳型 Ag@SiO_2 荧光纳米粒子的制备及表征

利用反相微乳液法制备了一种三联吡啶钌掺杂的核壳型Ag@SiO2纳米粒子。利用透射电子显微镜、荧光光谱和紫外-可见光谱等对其进行表征,并对其光稳定性和表面氨基进行了测定,结果表明该纳米粒子单分散性良好,呈规则球状、粒径为(60±5)nm,由于银的金属增强荧光效应,相对没有银核的Ru(bpy)3掺杂的SiO2纳米粒子,其荧光强度增强了2倍,光稳定性也有所提高。     

Synthesis of novel fluoroalkyl end‐capped oligomers/silica gel polymer hybrids possessing antibacterial activity

New fluoroalkyl end‐capped oligomers/silica gel polymer hybrids‐low‐molecular weight biocide (hibitane) composites were prepared by the reactions of tetraethoxysilane (TEOS) with fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide oligomers, and acrylic acid oligomers in methanol under acidic conditions at room temperature. The presence of hibitane in the composites was clarified by the use of elementary analyses of nitrogen in fluorinated acrylic acid oligomer composite and thermogravimetric analysis (TGA) of these fluorinated composites. Thermal stability of fluorinated composites thus obtained were found to increase significantly compared to those of the parent fluorinated oligomers. Thermal stability of fluorinated N,N‐dimethylacrylamide oligomer, acrylic acid oligomer/silica gel polymers hybrid‐hibitane composites decreased compared to those of the corresponding fluorinated oligomers/silica gel polymer hybrids; however, the thermal stability of fluorinated N‐(1,1‐dimethyl‐3‐oxobutylacryl)amide oligomer/silica gel polymer hybrid‐hibitane composite increased significantly compared to that of the corresponding fluorinated oligomer hybrid. The sol methanol solutions of these fluorinated composites were applied to the surface modification of glass to exhibit not only a strong oleophobicity imparted by end‐capped fluoroalkyl groups in oligomers but also a good hydrophilicity on the glass surface. Fluorinated oligomers/silica gel polymer hybrids‐hibitane composites were found to exhibit high anti‐bacterial activity against Pseudomonas aeruginosa and Staphylococcus aureus. Therefore, these fluorinated hibitane composites are suggested to have high potential for new attractive functional materials through not only their excellent surface active property imparted by fluorine and their thermal stability but also through their anti‐bacterial activity. Copyright © 2005 John Wiley & Sons, Ltd.     

Novel self-assembled molecular aggregates formed by fluoroalkyl end-capped oligomers and their application

A variety of fluoroalkyl end-capped oligomers were prepared under mild conditions by the use of fluoroalkanoyl peroxide as a key intermediate. These oligomers can form the self-assembled molecular aggregates with the aggregations of end-capped fluoroalkyl groups in aqueous and organic media. Fluorinated self-assembled molecular aggregates containing carboxyl and sulfo groups were suggested to interact with positively charged HIV-1 to exhibit a potent anti-HIV-1 activity in vitro. In contrast, fluoroalkyl end-capped oligomers containing cationic segments exhibited not only the unique surface active properties imparted by fluorine as well as the usual low-molecular fluorinated surfactants, but also high surface antibacterial activity. Fluoroalkyl end-capped oligomers containing betaine-type segments were found to cause a gelation where the strong aggregation of the end-capped fluoroalkyl groups is involved in establishing the physical gel network in water and polar organic solvents under non-crosslinked conditions. Similarly, fluoroalkyl end-capped oligomers containing hydroxyl groups could cause a gelation, where the aggregation of fluoroalkyl groups and hydrogen-bonding interaction is involved in establishing a physical gel network in water and polar organic solvents under non-crosslinked conditions. Fluoroalkanoyl peroxide is also a convenient tool for the preparation of new fluoroalkyl end-capped oligomers containing recognition moieties such as diacetone segments. These fluorinated oligomers containing recognition moieties could form the self-assembled molecular aggregates to recognize selectively the hydrophilic amino and N,N-dimethylamino compounds as guest molecules.     

Preparation of novel fluoroalkyl end-capped oligomers/silica hybrid nanoparticles-encapsulation of a variety of guest molecules into fluorinated nanoparticles

Fluoroalkyl end-capped oligomers reacted with tetraethoxysilane and silica/nanoparticles under alkaline conditions to afford fluoroalkyl end-capped oligomers/silica nanoparticles (mean diameters: 31–54 nm) with a good dispersibility and stability in organic media. Interestingly, the isolated fluorinated particle powders were found to afford nanometer size-controlled colloidal particles with a good redispersibility and stability in these media. In addition, fluoroalkyl end-capped oligomers/silica nanoparticles-encapsulated guest molecules such as stable organic radicals and ionic liquids were prepared under similar conditions. These fluorinated nanoparticles-encapsulated guest molecules were applied to a new type of surface-modification agent, and these particles were able to disperse well above the poly (methyl methacrylate) films.     

Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method

This study was focused on the photocatalytic activity of polyaniline (Pani)/iron doped titanium dioxide (Fe–TiO₂) composites for the degradation of methylene blue as a model dye. TiO₂ nanoparticles were doped with iron ions (Fe) using the wet impregnation method and the doped nanoparticles were further combined with Pani via an in situ polymerization method. For comparison purposes, Pani composites were also synthesized in the presence undoped TiO₂. The photocatalyst and the composites were characterized by standard analytical techniques such as FTIR, XRD, SEM, EDX and UV–Vis spectroscopies. Fe–TiO₂ and its composites exhibited enhanced photocatalytic activity under ultraviolet light irradiation. Improved photocatalytic activity of Fe–TiO₂ was attributed to the dopant Fe ions hindering the recombination of the photoinduced charge carriers. Pani/Fe–TiO₂ composite with 30?wt.% of TiO₂ nanoparticles achieved 28% dye removal and the discoloration rate of methylene blue for the sample was 0.0025?min^?1. FTIR, XRD, SEM, EDX and UV–Vis spectroscopies supported the idea that Fe ions integrated into TiO₂ crystal structure and Pani composites were successfully synthesized in the presence of the photocatalyst nanoparticles. The novelty of this study was to investigate the photocatalytic activity of Pani composites, containing iron doped TiO₂ and to compare their results with that of Pani/TiO₂.     

Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Fe3O4@SiO2@polymer复合粒子的制备及在药物控制释放中的应用

本文通过多步反应制备了一种新型的、多层结构的、多功能的磁性纳米复合粒子, (Fe₃O₄@SiO₂@polymer). 纳米复合粒子内核是磁性Fe₃O₄纳米粒子, SiO₂包裹在Fe₃O₄上能够使其稳定分散和保护其不被腐蚀氧化; 中间层是生物相容的聚天冬氨酸(PAsp)载药层; 最外层是亲水的聚乙二醇(PEG)稳定层. 磁性纳米复合粒子各层都是生物相容的, 利用静电作用将抗癌药物阿霉素(DOX)负载在磁性纳米复合粒子中, 通过PAsp的pH响应调节了DOX的释放速率.     

Fluorinated piperidine iminosugars and their N-alkylated derivatives: Synthesis,conformational analysis,immunosuppressive and glycosidase inhibitory activity studies

The fluorinated piperidine iminosugars 2a-4a and their N-octyl and N-decyl derivatives 2b,c-4b,c were synthesized from d-mannose/d-xylose using nucleophilic fluorination as the key step. The conformation of iminosugars 2/3, either ²C₅ or ⁵C₂, was assigned based on the ¹H NMR studies at different pH. Immunomodulatory activity of 2a,c-4a,c was examined using Mixed Lymphocyte Reaction (MLR) and B-cell assay. The N-alkylated fluorinated d-manno-iminosugars 3b/4b were found to be better immunosuppressive agents (IC₅₀?=?5–6?μM) on T-cells. The fluorinated iminosugar 3a/4a act as potent and selective inhibitors of β-glucosidase (IC₅₀?=?4–8?μM). The N-alkyl-iminosugars 4b-c were found to be moderate inhibitors of α-glucosidase (yeast) and α-galactosidase (coffee beans), respectively.     

Synthesis and electromagnetic properties of polyaniline-coated silica/maghemite nanoparticles

Polyaniline coated silica/maghemite nanoparticles (PANI/SiO₂/γ-Fe₂O₃ composites) were synthesized by the combination of a sol-gel process and an in-situ polymerization method, in which ferrous and ferric salts as well as tetraethyl orthosilica (TEOS) acted as the precursor for γ-Fe₂O₃ and silica, respectively. As a result, the SiO₂/γ-Fe₂O₃ particle showed a core-shell structure, with γ-Fe₂O₃ as the magnetic core and silica as the shell of the particle. The shell thickness can be controlled by changing the TEOS concentration. The PANI/SiO₂/γ-Fe₂O₃ composites revealed a multilayer core-shell structure, where PANI is the outer shell of the composite. The doping level and the conductivity of PANI/SiO₂/γ-Fe₂O₃ composites decreased with increasing the TEOS content due to the presence of the less coated PANI on the SiO₂/γ-Fe₂O₃ core at higher TEOS content. For a SQUID analysis at room temperature, all γ-Fe₂O₃ containing composites showed a typical superparamagnetic behavior. The saturation magnetization of SiO₂/γ-Fe₂O₃ nanoparticles decreased with increasing the TEOS content due to the increase in silica shell thickness, while the saturation magnetization of PANI/SiO₂/γ-Fe₂O₃ composites also decreased with increasing the TEOS content, which is attributed to the lower conductivity of PANI in the composites at higher TEOS content.     

Preparation of novel fluoroalkyl end-capped oligomeric nanoparticles-encapsulated hibitane

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA)_n-R_F] reacted with hibitane in methanol at 90 °C to afford R_F-(DOBAA)_n-R_F oligomeric nanoparticles-encapsulated hibitane in good isolated yields. These fluorinated oligomeric particles-encapsulated hibitane were nanometer size-controlled very fine particles, and were found to exhibit a good dispersibility and stability in a wide variety of traditional organic solvents including fluorinated aliphatic solvents. Each dispersed solution with fluorinated nanoparticles afforded transparent colorless solution. These fluorinated nanoparticles were also found to exhibit a good antibacterial activity, and were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

A Versatile Approach to CF3‐Containing 2‐Pyrrolidones by Tandem Michael Addition–Cyclization: Exemplification in the Synthesis of Amidine Class BACE1 Inhibitors

The synthesis of new fluorinated pyrrolidones starting from unprotected amino esters and amino nitriles through a Michael addition–lactamization sequence is described. The resulting CF₃‐containing building blocks, bearing a quaternary stereogenic center adjacent to the fluorinated group, have been converted into amino pyrrolidines that display potent β‐secretase 1 (BACE1) inhibitory activity. This work constitutes an example of selective fluorination as a valid strategy for the modulation of physicochemical and biological properties of lead compounds in drug discovery.     

Compatibilisation effect of PP-g-MA copolymer on iPP/SiO2 nanocomposites prepared by melt mixing

In the present study, a series of iPP/SiO₂ nanocomposites, containing 1, 2.5, 5, 7.5, 10 and 15 wt% SiO₂ nanoparticles, were prepared by melt mixing in a twin screw co-rotating extruder. Poly(propylene-g-maleic anhydride) copolymer (PP-g-MA) containing 0.6 wt% maleic anhydride content was added to all nanocomposites at three different concentrations, 1, 2.5 and 5 wt%, based on silica content. Mechanical properties such as tensile strength at break and Young’s modulus were found to increase and to be mainly affected by the content of silica nanoparticles as well as by the copolymer content. For the tensile strength at break as well as for yield point, a maximum was observed, corresponding to the samples containing 2.5-5 wt% SiO₂. At higher concentrations, large nanosilica agglomerates are formed that have as a result a decrease in tensile strength. Young’s modulus increases almost linearly on the addition of SiO₂, and takes values up to 60% higher than that of neat iPP. Higher concentrations of PP-g-MA resulted in a further enhancement of mechanical properties due to silica agglomerate reduction. This finding was verified from SEM and TEM micrographs. Evidently the surface silica hydroxyl groups of SiO₂ nanoparticles react with maleic anhydride groups of PP-g-MA and lead to a finer dispersion of individual SiO₂ nanoparticles in the iPP matrix. The enhanced adhesion in the interface of the two materials, as a result of the mentioned reaction, has been studied and proved by using several equations. The increased Vicat point of all nanocomposites, by increasing the PP-g-MA content, can also be mentioned as a positive effect.