A widely varying range of products in reactions of C6F5BrF2, C6F5IF2, and C6F5IF4 with Lewis acids of different strength

The relative fluoride donor ability: C₆F₅BrF₂ > C₆F₅IF₂ > C₆F₅IF₄ was outlined from reactions with Lewis acids of graduated strength in different solvents. Fluoride abstraction from C₆F₅HalF₂ with BF₃·NCCH₃ in acetonitrile (donor solvent) led to [C₆F₅HalF·(NCCH₃)_n][BF₄]. The attempted generation of [C₆F₅BrF]⁺ from C₆F₅BrF₂ and anhydrous HF or BF₃ in weakly coordinating SO₂ClF gave C₆F₅Br besides bromoperfluorocycloalkenes C₆BrF₇ and 1-BrC₆F₉. In reactions of C₆F₅IF₂ with SbF₅ in SO₂ClF the primary observed intermediate (¹⁹F NMR, below 0 °C) was the 4-iodo-1,1,2,3,5,6-hexafluorobenzenium cation, which converted into C₆F₅I and 1-IC₆F₉ at 20 °C. The reaction of C₆F₅IF₄ with SbF₅ in SO₂ClF below −20 °C gave the cation [C₆F₅IF₃]⁺ which decomposed at 20 °C to C₆F₅I, 1-iodoperfluorocyclohexene, and iodoperfluorocyclohexane. Principally, the related perfluoroalkyl compound C₆F₁₃IF₄ showed a different type of products in the fast reaction with AsF₅ in CCl₃F (−60 °C) which resulted in C₆F₁₄. Intermediate and final products of C₆F₅HalF_n−1 (n = 3, 5) with Lewis acids were characterized by NMR in solution. Stable solid products were isolated and analytically characterized.     

Silver compounds in synthetic chemistry. Part 3. 4-Tetrafluoropyridyl silver(I), AgC5F4N - A reagent for redox transmetallations with group 12-14 elements

4-Tetrafluoropyridyl silver(I), AgC₅F₄N, has been obtained from Me₃SiC₅F₄N and AgF in nearly quantitative yield. Reactions with bis(triphenylphosphoranyliden)ammonium chloride, [PNP]Cl, gave crystalline material of the composition [PNP][Ag(C₅F₄N)₂]. Redox transmetallations of AgC₅F₄N and group 12-14 elements Zn, Cd, Hg, Ga, In, Sn yielded the corresponding 4-tetrafluoropyridyl element compounds. The molecular structures of [PNP][Ag(C₅F₄N)₂], Hg(C₅F₄N)₂, Ga(C₅F₄N)₃ · EtCN · H₂O, In(C₅F₄N)₃ · 2EtCN and Sn(C₅F₄N)₄ are discussed.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].     

Synthesis and surface activities of organic solvent-soluble fluorinated surfactants

A variety of fluorinated surfactants soluble in organic solvent were prepared, including C₈F₁₇SO₂NHC_nH_2n+1 (n = 2, 4, 6, 8, 10), C₈F₁₇SO₂NHR (R = C₆H₁₁, C₆H₅), C₈F₁₇SO₂N(C_nH_2n+1)₂ (n = 1, 2, 3, 4) and C₈F₁₇SO₂NH(CH₂)_nNHO₂SC₈F₁₇ (n = 6, 10). Their surface activities in various organic solvents were determined by surface tension measurement. The results showed that these fluorinated surfactants can reduce the surface tension of both polar and non-polar organic solvents. In general, organic solvents with strong polarity or long alkyl chain are beneficial to increase the surface activity of these polar fluorinated surfactants. By comparing fluorinated surfactants with the same fluorocarbon segment and connecting group, C₈F₁₇SO₂N(C_nH_2n+1)₂ (n = 1, 2, 3, 4) showed lower surface activity in organic solvents than C₈F₁₇SO₂NHC_nH_2n+1 (n = 2, 4, 6, 8) with an equal carbon number of the solvophilic group. Through surface tension vs. concentration curves given for N-octyl perfluorooctanesulfonamide in various organic solvents, a break point like the critical micelle concentration of ordinary surfactants in aqueous solutions was observed, and the effect of the different types of organic solvents on adsorption and aggregation behavior was also studied.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

Synthesis of phosphate-type fluorocarbon-hydrocarbon hybrid surfactants and their adsorption onto calcium hydroxyapatite

Five novel phosphate-type hybrid surfactants, C_mF_2m+1C₆H₄CH[OPO₂(OC₆H₅)Na]C_nH_2n+1 (FmPHnPPhNa: m = 4, 6, 8; n = 3, 5; C₆H₄ = p-phenylene, C₆H₅ = phenyl), have been synthesized. When compared with sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (C₆H₄ = p-phenylene), the new hybrid surfactants are found to have comparable abilities to lower surface tension of water. The critical micelle concentrations of FmPHnPPhNa follow Klevens rule and their occupied areas per molecule increase with increasing m and n. Calcium hydroxyapatite (CaHAp) pellets modified with FmPH3PPhNa gives high hydrophobic and lipophobic surfaces. The hybrid surfactants are expected as new dental reagents for oral hygiene.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

Bis(perfluoroorganyl)bromonium salts [(RF)2Br]Y (RF = aryl, alkenyl, and alkynyl)

Bromonium salts [(R_F)₂Br]Y with perfluorinated groups R_FC₆F₅, CF₃CFCF, C₂F₅CFCF, and CF₃C≡C were isolated from reactions of BrF₃ with R_FBF₂ in weakly coordinating solvents (wcs) like CF₃CH₂CHF₂ (PFP) or CF₃CH₂CF₂CH₃ (PFB) in 30-90% yields. C₆F₅BF₂ formed independent of the stoichiometry only [(C₆F₅)₂Br][BF₄]. 1:2 reactions of BrF₃ and silanes C₆F₅SiY₃ (Y = F, Me) ended with different products - C₆F₅BrF₂ or [(C₆F₅)₂Br][SiF₅] - as pure individuals, depending on Y and on the reaction temperature (Y = F). With C₆F₅SiF₃ at ≥−30 °C [(C₆F₅)₂Br][SiF₅] resulted in 92% yield whereas the reaction with less Lewis acidic C₆F₅SiMe₃ only led to C₆F₅BrF₂ (58%). The interaction of K[C₆F₅BF₃] with BrF₃ or [BrF₂][SbF₆] in anhydrous HF gave [(C₆F₅)₂Br][SbF₆]. Attempts to obtain a bis(perfluoroalkyl)bromonium salt by reactions of C₆F₁₃BF₂ with BrF₃ or of K[C₆F₁₃BF₃] with [BrF₂][SbF₆] failed. The 3:2 reactions of BrF₃ with (C₆F₅)₃B in CH₂Cl₂ gave [(C₆F₅)₂Br][(C₆F₅)_nBF_4−n] salts (n = 0-3). The mixture of anions could be converted to pure [BF₄]⁻ salts by treatment with BF₃·base.     

Gas phase UV and IR absorption spectra of CxF2x+1CHO (x = 1-4)

The UV and IR spectra of C_xF_2x+1CHO (x = 1-4) were investigated using computational and experimental techniques. C_xF_2x+1CHO (x = 1-4) have broad UV absorption features centered at 300-310 nm. The maximum absorption cross-section increases significantly and shifts slightly to the red with increased length of the C_xF_2x+1 group: CF₃CHO, 3.10 × 10⁻²⁰ (300 nm); C₂F₅CHO, 6.25 × 10⁻²⁰ (308 nm); C₃F₇CHO, 8.96 × 10⁻²⁰ (309 nm); and C₄F₉CHO, 10.9 × 10⁻²⁰ (309 nm). IR spectra for C_xF_2x+1CHO were recorded, calculated, and assigned. Results are discussed with respect to the literature data and to the atmospheric fate of CxF2x+1CHO.     

Syntheses and structures of N-polyfluorophenyl- and N,N′-bis(polyfluorophenyl)ethane-1,2-diaminato(1- or 2-)platinum(II) complexes

The reaction of [PtX₂(L)] (X = Cl, Br, I; L = NH₂CH₂CH₂NY₂; Y = Et, Me) with thallium(I) carbonate and a polyfluorobenzene (RF) in pyridine (py) yields the platinum(II) complexes, [Pt{N(R)CH₂CH₂NY₂}X(py)] (R = C₆F₅, 4-HC₆F₄, 4-BrC₆F₄, or 4-IC₆F₄, Y = Et (1), Me (2), X = Cl, Br or I) in an improved synthesis. From the reaction of [PtCl₂(H₂NCH₂)₂)] with Tl₂CO₃ and 1,2,3,4-tetrafluorobenzene or 2-bromo-1,3,4,5-tetrafluorobenzene in py, the new complexes [Pt(NRCH₂)₂(py)₂] (3) (R = C₆H₂F₃-2,3,6 and C₆HBrF₃-2,3,5,6) have been isolated but the latter preparation also gave product(s) with a 4-bromo-2,3,5-trifluorophenyl group. From an analogous preparation in 4-ethylpyridine (etpy), [Pt(N(4-HC₆F₄)CH₂)₂(etpy)₂] (4) was obtained. The X-ray crystal structures of (3) (R = C₆HBrF₃-2,3,5,6) and (4) were determined as well as that of the previously prepared (3) (R = 4-BrC₆F₄) and a more precise structure of (3) (R = 4-HC₆F₄) has been obtained.     

Low-energy electron and X-ray degradation of biomedical plasma-fluoropolymer

Plasma-deposited thin films of fluoropolymer on metallic substrates were degraded by low-energy (1-100 eV) electrons and X-ray irradiation to simulate irradiation conditions of implanted coated stents in the human body during diagnostic procedures using high energy radiation. The desorption of anions and cations from the surface of the films induced by 1-100 eV electrons was recorded by mass spectrometry. The electron energy dependence of the emission of F⁻ exhibited a resonant peak at 12.9 ± 0.4 eV, showing the formation of a transient excited anion and a monotonic rise at higher energies, associated to dipolar dissociation. In the positive ion mode, the fragments F⁺, CF⁺, CF₂⁺, CF₃⁺, C₃F₃⁺, C₂F₄⁺ and C₂F₅⁺ were observed. Emission thresholds were measured and laid above 25 eV. The shape of the cation emission curves versus electron energy showed no resonant process. X-ray degradation was studied by X-ray photoelectron spectroscopy for different exposure times. Loss of fluorine in -CF₂ groups was observed and damage mechanisms were proposed.     

Synthesis and fluxional behaviour of new “heavy fluorous” cyclopentadienes

The new “heavy fluorous” cyclopentadienes C₅H_6−n[M(C₂H₄C₆F₁₃)₃]_n (M = Si, n = 1 (3); n = 2 (4) and M = Sn, n = 1 (10)) were synthesized by reaction of cyclopentadienyl lithium with BrSi(C₂H₄C₆F₁₃)₃ (2) or commercial BrSn(C₂H₄C₆F₁₃)₃. Fluorous cyclopentadienes prepared in this manner contain three or six C₆F₁₃ groups, which significantly increase their solubility in perfluorinated solvents. They also provide intermediates for titanium complexes suitable for fluorous biphase catalysis. All three isomers of silylcyclopentadienes 3 and 4 were identified and fully characterized by two dimensional NMR spectroscopy, which was performed at low temperature. The allylic isomers 3a and 4a undergo degenerate metallotropic rearrangement. This fluxional behaviour was compared with the behaviour of previously prepared cyclopentadienes 6 and 7 (C₅H_6−n[SiMe₂(C₂H₄C₈F₁₇)]_n where n = 1, 2, respectively). The presence of allylic isomers 6a and 7a was further confirmed by Diels-Alder cycloaddition of the strong dienophile tetracyanoethylene (TCNE), providing compounds 8 and 9.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

C60F14OFPh3, a fluoroxy derivative of C60F15Ph3; evidence for the presence of ‘missing’ fluorine through restricted rotation of a phenyl group

From the reaction of C₆₀F₁₈ with benzene in the presence of SbCl₅ we have isolated a compound of 1252 amu indicated to be C₆₀F₁₄OFPh₃, a fluoroxyfullerene. Temperature-variable ¹H NMR shows that one phenyl group suffers restricted rotation on cooling to 218 K, attributed to the presence of the OF group which, as in the case of the recently characterised C₆₀F₁₇OF, fails to give a signal for this group in the ¹⁹F NMR. We have isolated also, C₆₀F₁₄O₂FPh₃ (1268 amu) a mixture of oxahomo derivatives of C₆₀F₁₄OFPh₃ arising from oxygen insertion into FCCF bonds. Theoretical calculations for C₆₀F₁₄OFPh₃ indicate that the phenyl group nearest to the OF group is twisted out of the plane containing the other two.     

Dehalogenative aromatization of perchlorofluoroalicyclic compounds C6Cl6F6, C10Cl8F8 and C5Cl4F5N in the vapour phase or in solution

Dehalogenation of perhalogenated cyclohexanes C₆Cl₆F₆, 1-azacyclohexenes C₅Cl₄F₅N and bicyclo[4.4.0]dec-1(6)-enes C₁₀Cl₈F₈ in the vapour phase over iron filings at 350-500 °C and in solution with Zn and additivities (Cu, NiCl₂·6H₂O + bpy) at 80 °C (heterogeneous reaction) or with P(NEt₂)₃ at 20 °C (homogeneous reaction) was studied. In all cases, perfluoroarenes, chloroperfluoroarenes and dichloroperfluoroarenes (benzenes, naphthalenes and pyridines) were obtained in good overall yield.     

The formation of oxygen-containing perfluorocyclohexadien-1-yliodine tetrafluorides

The electrophilic oxygenation of pentafluorophenyl iodo compounds C₆F₅IF_n with iodine in different valencies (n = 0, 2, 4) using XeF₂-H₂O in HF allowed access to new organoiodine(V) compounds, namely isomeric oxopentafluorocyclohexadien-1-yliodine tetrafluorides, C₆(O)F₅IF₄.     

Synthesis of neutral and cationic monocyclopentadienyl alkyl niobium and tantalum complexes

Compound [NbCp′Me₄] (Cp′ = η⁵-C₅H₄SiMe₃, 1) reacted with several ROH compounds (R = tBu, SiiPr₃, 2,6-Me₂C₆H₃) to give the derivatives [NbCp′Me₃(OR)] (R = tBu 2a, SiiPr₃2b, 2,6-Me₂C₆H₃2c). The diaryloxo tantalum compound [TaCp^∗Me₂(OR)₂] (Cp^∗ = η⁵-C₅Me₅, R = 2,6-Me₂C₆H₃3) was obtained by reaction of [TaCp^∗Cl₂Me₂] with 2 equiv of LiOR (R = 2,6-Me₂C₆H₃). Abstraction of one methyl group from these neutral compounds 1-3 with the Lewis acids E(C₆F₅)₃ (E = B, Al) gave the ionic derivatives [NbCp′Me₂X][MeE(C₆F₅)₃] (X = Me 4-E. X = OR; R = SiiPr₃5b-E, 2,6-Me₂C₆H₃5c-E. E = B, Al) and [TaCp^∗Me(OR)₂][MeE(C₆F₅)₃] (R = 2,6-Me₂C₆H₃6-E; E = B, Al). Polymerization of MMA with the aryloxoniobium compound 2c and Al(C₆F₅)₃ gave syndiotactic PMMA in a low yield, whereas the tetramethylniobium compound 1 and the diaryloxotantalum derivative 3 were inactive.     

Catalytic pyrolysis of CHF3 over activated carbon and activated carbon supported potassium catalyst

The catalytic activity of activated carbon (AC) and activated carbon supported potassium for the decomposition of CHF₃ was investigated at temperatures between 873 and 1173 K and at a space velocity of 4300 h⁻¹. It is found that activated carbon supported potassium shows high and relatively stable activity during the pyrolysis of CHF₃ under the conditions studied. Compared with the gas phase reaction, the conversion of CHF₃ increases by up to 10 times between 873 and 1123 K, with the major products being C₂F₄ and C₃F₆. Selectivities as high as 55% to C₂F₄ and 35% to C₃F₆ are achieved under optimum conditions. The main byproduct HF readily reacts with K₂O in the catalyst, converting the catalyst from K₂O/AC into KF/AC. Selectivity to the major products remains relatively constant following this transformation.     

Explored routes to unknown polyfluoroorganyliodine hexafluorides, RFIF6

Two routes to R_FIF₆ compounds were investigated: (a) the substitution of F by R_F in IF₇ and (b) the fluorine addition to iodine in R_FIF₄ precursors. For route (a) the reagents C₆F₅SiMe₃, C₆F₅SiF₃, [NMe₄][C₆F₅SiF₄], C₆F₅BF₂, and 1,4-C₆F₄(BF₂)₂ were tested. C₆F₅IF₄ and CF₃CH₂IF₄ were used in route (b) and treated with the fluoro-oxidizers IF₇, [O₂][SbF₆]/KF, and K₂[NiF₆]/KF. The observed sidestep reactions in case of routes (a) and (b) are discussed. Interaction of C₆F₅SiX₃ (X = Me, F), C₆F₅BF₂, 1,4-C₆F₄(BF₂)₂ with IF₇ gave exclusively the corresponding ring fluorination products, perfluorinated cyclohexadiene and cyclohexene derivatives, whereas [NMe₄][C₆F₅SiF₄] and IF₇ formed mixtures of C₆F_nIF₄ and C₆F_nH compounds (n = 7 and 9). CF₃CH₂IF₄ was not reactive towards the fluoro-oxidizer IF₇, whereas C₆F₅IF₄ formed C₆F_nIF₄ compounds (n = 7 and 9). C₆F₅IF₄ and CF₃CH₂IF₄ were inert towards [O₂][SbF₆] in anhydrous HF. CF₃CH₂IF₄ underwent C-H fluorination and C-I bond cleavage when treated with K₂[NiF₆]/KF in HF. The fluorine addition property of IF₇ was independently demonstrated in case of perfluorohexenes. C₄F₉CFCF₂ and IF₇ underwent oxidative fluorine addition at −30 °C, and the isomers (CF₃)₂CFCFCFCF₃ (cis and trans) formed very slowly perfluoroisohexanes even at 25 °C. The compatibility of IF₇ and selected organic solvents was investigated. The polyfluoroalkanes CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB), and C₄F₉Br are inert towards iodine heptafluoride at 25 °C while CF₃CH₂Br was slowly converted to CF₃CH₂F. Especially PFP and PFB are new suitable organic solvents for IF₇.     

Synthesis and characterization of fluorous (S)- and (R)-1-phenylethylamines that effect heat facilitated resolution of (±)-2-(8-carboxy-1-naphthylsulfinyl)benzoic acid via diastereomeric salt formation and study of their circular dichroism

Perfluoroalkyl- or nonafluoro-tert-butoxy-alkyl-substituted enantiopure amines having the structure PhCHCH₃(NR¹R²) [R¹ = H, CH₃; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃; R¹ = R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃] are obtained in high yields, when (S)-(−)-1-phenylethylamine is reacted with readily accessible alkylating reagents or fluorous 2° amines (R¹ = H; R² = (CH₂)₃C₈F₁₇, (CH₂)₂OC(CF₃)₃) are methylated in a Leuckart-Wallach reaction. The solubility patterns of these novel chiral amines and their hydrochlorides are qualitatively described for a broad spectrum of solvents and the fluorous partition coefficients of the free bases are determined by GC. A novel method for the resolution of enantiomers is disclosed here, which involves the use a half-equivalent of the selected resolving agent in solvent water that displays low solubility for the crystalline diastereomeric salt(s) formed even at temperatures near to its boiling point. Compound (S)-(−)-PhCHCH₃[NH(CH₂)₃C₈F₁₇] is found to satisfy all the latter conditions and successfully used for the heat facilitated resolution of the title racemic acid. The circular dichroism (CD) spectra of six novel fluorous (S)-(−)-1-phenylethylamine derivatives are measured in ethanol, trifluoroethanol and hexafluoropropan-2-ol and discussed in detail.