CO/CO2一步法制备航空煤油的研究进展

CO/CO₂一步法制备航空煤油技术是石油基航空煤油重要的替代手段之一。目前,CO一步法制备航空煤油技术存在的主要问题是航空煤油组分C₈~C₁₆选择性不高。CO₂一步法制备航空煤油存在的问题是CO₂转化率低和C₈~C₁₆选择性不高。综述了近五年CO/CO₂一步法制备航空煤油用催化剂的研究进展。催化剂研究的重点在于主催化剂、载体和助催化剂。调变主催化剂、载体和助催化剂,有望得到理想的航空煤油组分。     

The effect of temperature, pressure, exposure time, and depressurization rate on lipase activity in SCCO2

We investigated the influence of temperature, pressure, exposure time, and decompression rate on lipase activity in high-pressure CO₂ medium. A high-pressure, variable-volume view cell was employed in the experiments, varying the temperature from 30 to 70°C in the pressure range of 70–250 bar at various high-pressure exposure times (60–360 min) and adopting several decompression rates (10–200 kg/[m³·min]). The results obtained show that an increase in temperature and density led to an enhancement of enzyme activity losses while the decompression rates had a weak influence on enzyme inactivation.     

Application of thermogravimetric analysis to the evaluation of aminated solid sorbents for CO<Subscript>2</Subscript> capture

In this work a series of solid sorbents were synthesized by immobilizing liquid amines on the surface of a mesoporous alumina. The samples were chemically characterized and BET surface areas calculated from the N₂ adsorption isotherms at 77 K. The CO₂ capture performance of the sorbents and their thermal stability was studied by thermogravimetric methods. The effect of amine loading on the CO₂ capture performance of the prepared sorbents was also evaluated. Analysis of TG-DTG curves showed that thermal stabilization of the amines is significantly improved by immobilizing them on an inorganic support. Temperature-programmed CO₂ adsorption tests from 298 K up to 373 K at atmospheric pressure, proved to be a useful technique for assessing the capacity of sorbents for CO₂ capture. Alumina impregnated with diethylenetriamine presented the highest CO₂ adsorption capacities throughout the tested temperature range.     

Experimental determination and calculation of the critical curves for the binary systems of CO2 containing ketone, alkane, ester and alcohol, respectively

A set of variable-volume autoclave with a quartz window was used for the experimental determination of the high-pressure phase equilibria and critical curves. The critical temperatures, pressures, densities and mole volumes in the region near the critical point of CO₂ were examined for eleven binary systems of supercritical CO₂ (SC CO₂) with different kinds of substances (ketone, alkane, ester and alcohol), respectively. The critical curves of the above binary systems were also calculated using an equation of state. The equation consists of a hard body repulsion term and an additive perturbation term, which takes care of the attractive molecular interaction. The calculated data were compared with the experimental data, and yielded good agreements. At the same time, the values of the adjustable parameters, λ, k_σ and k_? were obtained. The critical curves of the above eleven binary systems at higher temperatures and pressures all belong to type I.     

Predictions of cation and anion effects on solubilities,selectivities and permeabilities for CO2 in ionic liquid using COSMO based activity coefficient model

The solubilities and selectivities for CO₂, N₂ and CH₄ in ionic liquid were predicted using a COSMO based activity coefficient model, COSMO-SAC method. The 1-alkyl-3-methylimidazolium cations were focused in this work. The anion species include tetrafluoroborate [BF₄], hexafluorophosphate [PF₆], triflate [OTf], dicyanamide [dca] and bis(trifluoromethane)-sulfonimide [Tf₂N]. The predicted results of the solubilities of CO₂ in the ionic liquids by COSMO-SAC method are in agreement with the experimental data within the averaged deviation of 0.0017 in mole fraction. The predicted results of selectivities for CO₂/N₂ and CO₂/CH₄ represent the effects of anion species qualitatively. Permeability through supported liquid membrane can be presented by solubility and diffusion coefficients in the liquid. The permeabilities of CO₂ through the ionic liquid membranes were also predicted by a solution-diffusion model with COSMO-SAC method. The predicted results of the CO₂ permeabilities through the ionic liquids represent the experimental data within the order of the permeabilities.     

一种检测CO32-比率荧光探针的合成及其在细胞成像中的应用

本文设计开发了一种以2,6-二甲酰基对甲苯酚为母体的新型荧光探针HMI,可用于高效识别EtOH-H₂O (8/2, v/v, HEPES 10 mM, pH =7.4)体系中的CO_3^2-。HMI在660 nm处显示发射带,加入CO_3^2-后,在600 nm的等吸收点激发时,原来在660 nm处的荧光淬灭,而以540 nm为中心的新发射带荧光显着增加,为比率型荧光探针。HMI对CO_3^2-表现出高选择性且具有较强的抗干扰能力。此外,荧光探针HMI对CO_3^2-荧光响应的检测限较低,可达到3.938×10^_-6 M。更具有意义的是,HMI探针对CO_3^2-的检测能够在实际水样中起到很好的应用,而且细胞成像研究表明,HMI可用于活体MCF-7细胞中CO_3^2-的成像。     

Cu掺杂TiO2纳米管可见光催化矿化甲苯

采用低温水热法制备氢钛酸管, 通过吸附-煅烧法制备Cu掺杂TiO₂纳米管(Cu-TNT)催化剂. 利用X射线衍射(XRD)、电感耦合等离子体-原子发射光谱(ICP-AES)、X射线光电子能谱(XPS)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis-DRS)和电化学测试手段对样品进行表征, 并进行平面波赝势密度泛函理论(DFT)计算. 结果表明, 样品中Cu/Ti原子比接近理论值, Cu掺杂进入TiO₂晶格内部, 诱发催化剂可见光活性. 掺Cu后,Cu 3d轨道和O 2p轨道杂化形成价带顶, 价带负向偏移, 样品禁带宽度减小为2.50-2.91 eV, 具有可见光响应.以甲苯为模型污染物研究催化剂对挥发性有机化合物(VOCs)的催化去除和矿化效果. 未掺杂的TNT可见光催化活性较差; Cu掺杂量超过0.1%(Cu/Ti原子比)时, 样品催化活性也减弱; Cu掺杂量为0.1%的催化剂具有最佳可见光催化氧化能力, 7 h内甲苯的去除率达77%, 甲苯的矿化率达59%.     

聚乙烯亚胺修饰的氧化硅纳米管基吸附剂的制备及其CO_2吸附应用

以P123为模板,1,2-二(三甲氧基硅基)乙烷(BTME)为硅源合成了介孔氧化硅纳米管(E-SNTs).将ESNTs经过聚乙烯亚胺(PEI)修饰后制得吸附剂用于捕捉CO2.对吸附剂进行了透射电镜(TEM)、物理吸附、傅里叶变换红外(FTIR)光谱、热重分析(TGA)等表征.E-SNTs-PEI吸附剂的最佳CO2吸附温度为75°C.吸附剂的CO2吸附量随着PEI负载量的增加呈现先增大后减小的趋势,其中50%为最佳负载量,此时吸附剂的吸附量最大为3.32 mmol·g-1.相比较SBA-15基吸附剂,E-SNTs基吸附剂具有更优异的吸附性能.在有水汽的存在下,吸附剂E-SNTs-50的CO2吸附量达到3.75 mmol·g-1.经过四次循环吸脱附实验测试E-SNTs-PEI吸附剂的稳定性能,结果表明其CO2吸附量基本不变,该吸附剂表现出较好的稳定性和可再生能力.     

陈化温度和pH值对氨基功能化介孔氧化硅吸附CO_2性能的影响

本研究采用溶胶-凝胶法,分别以十二烷基肌氨酸钠、氨丙基三甲氧基硅烷(APTMS)和正硅酸乙酯(TEOS)为结构导向剂(SDA)、共结构导向剂(CSDA)和硅源合成了氨基功能化的介孔氧化硅预产物。利用乙醇和乙醇胺混合液对预产物进行萃取后获得氨基功能化介孔氧化硅。利用红外光谱、元素分析、N2吸-脱附、透射电镜等手段对材料进行了表征。红外光谱结果证明通过萃取方法可较好地去除表面活性剂;N2吸附结果表明所有样品都具有介孔结构;元素分析和透射电镜结果说明反应陈化温度、pH值等合成条件对材料孔道内表面的氨基含量和材料结构有较大的影响。CO2吸附实验证明在低陈化温度、相对较低的pH值下合成的材料具有较高的CO2吸附量。     

HO2+HONO及其异构体抽氢反应机理

本文在CCSD(T)/aug-cc-pVTZ//M06-2X/6-311+G(3d,2p)水平上构建了HO_2与HONO及其异构体的反应势能剖面,并对各通道的速率常数进行了计算。结果表明,HONO存在cis-HONO、trans-HONO、HNO_2三种不同的异构体,其中HNO_2是最稳定的构型。HNO_2+HO_2反应(R3)能垒比其他两个反应(R1(cisHONO+HO_2)和R2(trans-HONO+HO_2))的能垒降低了8. 2～13. 8 kcal·mol~(-1)。采用传统过渡态理论结合Wigner校正对各反应在240～425 K范围内的速率常数进行了计算。结果表明,反应R3的速率常数比R1和R2的对应值大4～9个数量级,表明HO_2+HONO及其异构体的抽氢反应的速率主要取决于HNO_2+HO_2反应。     

Surfactant-assisted hydrothermal crystallization of nanostructured lithium metasilicate (Li2SiO3) hollow spheres: II—Textural analysis and CO2-H2O sorption evaluation

In a previous work, the synthesis and structural-microstructural characterization of different nanocrystalline lithium metasilicate (Li₂SiO₃) samples were performed. Then, in this work, initially, a textural analysis was performed over the same samples. Li₂SiO₃ samples prepared with a non-ionic surfactant (TRITON X-114) presented the best textural properties. Therefore, this sample was selected to evaluate its water vapor (H₂O) and carbon dioxide (CO₂) sorption properties. Sorption experiments were performed at low temperatures (30-80 °C) in presence of water vapor using N₂ or CO₂ as carrier gases. Results clearly evidenced that CO₂ sorption on these materials is highly improved by H₂O vapor, and of course, textural properties enhanced the H₂O-CO₂ sorption efficiency, in comparison with the solid-state reference sample.     

Synthesis,Characterization and Application of Amine-Functionalized Hierarchically Micro-Mesoporous Silicon Composites for CO2 Capture in Flue Gas

An efficient CO₂ adsorbent with a hierarchically micro-mesoporous structure and a large number of amine groups was fabricated by a two-step synthesis technique. Its structural properties, surface groups, thermal stability and CO₂ adsorption performance were fully investigated. The analysis results show that the prepared CO₂ adsorbent has a specific hierarchically micro-mesoporous structure and highly uniformly dispersed amine groups that are favorable for the adsorption of CO₂. At the same time, the CO₂ adsorption capacity of the prepared adsorbent can reach a maximum of 3.32 mmol-CO₂/g-adsorbent in the actual flue gas temperature range of 303–343 K. In addition, the kinetic analysis results indicate that both the adsorption process and the desorption process have rapid adsorption/desorption rates. Finally, the fitting of the CO₂ adsorption/desorption experimental data by Avrami’s fractional kinetic model shows that the CO₂ adsorption rate is mainly controlled by the intra-particle diffusion rate, and the temperature has little effect on the adsorption rate.     

Valorization of Different Fractions from Butiá Pomace by Pyrolysis: H2 Generation and Use of the Biochars for CO2 Capture

This work valorizes butiá pomace (Butia capitata) using pyrolysis to prepare CO₂ adsorbents. Different fractions of the pomace, like fibers, endocarps, almonds, and deoiled almonds, were characterized and later pyrolyzed at 700 °C. Gas, bio-oil, and biochar fractions were collected and characterized. The results revealed that biochar, bio-oil, and gas yields depended on the type of pomace fraction (fibers, endocarps, almonds, and deoiled almonds). The higher biochar yield was obtained by endocarps (31.9%wt.). Furthermore, the gas fraction generated at 700 °C presented an H₂ content higher than 80%vol regardless of the butiá fraction used as raw material. The biochars presented specific surface areas reaching 220.4 m² g⁻¹. Additionally, the endocarp-derived biochar presented a CO₂ adsorption capacity of 66.43 mg g⁻¹ at 25 °C and 1 bar, showing that this material could be an effective adsorbent to capture this greenhouse gas. Moreover, this capacity was maintained for 5 cycles. Biochars produced from butiá precursors without activation resulted in a higher surface area and better performance than some activated carbons reported in the literature. The results highlighted that pyrolysis could provide a green solution for butiá agro-industrial wastes, generating H₂ and an adsorbent for CO₂.     

The Selective CO2 Adsorption and Photothermal Conversion Study of an Azo-Based Cobalt-MOF Material

A new metal–organic framework (MOF), [Co₂(L)₂(azpy)]_n (compound 1, H₂L = 5-(pyridin-4-ylmethoxy)-isophthalic acid, azpy = 4,4′-azopyridine), was synthesized by a solvothermal method and further characterized by elemental analysis, IR spectra, thermogravimetric analysis, single-crystal and powder X-ray diffraction. The X-ray single-crystal diffraction analysis for compound 1 indicated that two cis L2²⁻ ligands connected to two cobalt atoms resulted in a macrocycle structure. Through a series of adsorption tests, we found that compound 1 exhibited a high capacity of CO₂, and the adsorption capacity could reach 30.04 cm³/g. More interestingly, under 273 K conditions, the adsorption of CO₂ was 41.33 cm³/g. In addition, when the Co-MOF was irradiated by a 730 nm laser, rapid temperature increases for compound 1 were observed (temperature variation in 169 s: 26.6 °C), showing an obvious photothermal conversion performance. The photothermal conversion efficiency reached 20.3%, which might be due to the fact that the parallel arrangement of azo units inhibited non-radiative transition and promoted photothermal conversion. The study provides an efficient strategy for designing MOFs for the adsorption of CO₂ and with good photothermal conversion performance.     

ACTH(6–9)PGP Peptide Protects SH-SY5Y Cells from H2O2, tert-Butyl Hydroperoxide,and Cyanide Cytotoxicity via Stimulation of Proliferation and Induction of Prosurvival-Related Genes

Stabilized melanocortin analog peptide ACTH(6–9)PGP (HFRWPGP) possesses a wide range of neuroprotective activities. However, its mechanism of action remains poorly understood. In this paper, we present a study of the proproliferative and cytoprotective activity of the adrenocorticotropic hormone fragment 6–9 (HFRW) linked with the peptide prolyine–glycyl–proline on the SH-SY5Y cells in the model of oxidative stress-related toxicity. The peptide dose-dependently protected cells from H₂O₂, tert-butyl hydroperoxide, and KCN and demonstrated proproliferative activity. The mechanism of its action was the modulation of proliferation-related NF-κB genes and stimulation of prosurvival NRF2-gene-related pathway, as well as a decrease in apoptosis.     

Direct atomic absorption spectrometry determination of tin, lead, cadmium and zinc in high-purity graphite with flame furnace atomizer

This work described methodology of Sn, Pb, Cd and Zn impurities determination in high-purity graphite at direct atomic absorption spectrometry (AAS) with flame furnace (FF) atomizer. It was evidence that quality of AAS measurements are depended from sample amount, its homogeneity, particle size, as well as calibration procedure and operation parameters of FF atomizer. Prior to analysis the method has been developed and optimized with respect to the furnace heating temperature and flame composition of FF atomizer. Conditions of absorption peak areas (Q_A) formation to each element were studied on the basis of contribution into its value some of individual parameters of analytes, including mass-transporting process from increasing mass of graphite samples into gas phase. Because particle size and homogeneous distribution of analyte in powdered materials has an enormous influence on accuracy and precision of measurement results, graphite as well as appropriate series of powdered reference standards was previously ground and investigated. Graphite samples to be analyzed and standard reference materials with mass from 0.025 to 0.200 g was previously briquetted as pellet and insert on corresponding hole in furnace. The characteristic mass (g₀) of Sn, Pb, Cd and Zn were 0.35, 0.1, 0.008 and 0.025 ng, respectively, and relative standard deviation (S_r) not more than 20%.     

A reagent-free SIA module for monitoring of sugar, color and dissolved CO2 content in soft drinks

This work presents a new sequential injection analysis (SIA) method and a module for simultaneous and real-time monitoring of three key parameters for the beverage industry, i.e., the sugar content (measured in Brix), color and dissolved CO₂. Detection of the light reflection at the liquid interface (the schlieren effect) of sucrose and water was utilized for sucrose content measurement. A near infrared LED (890 ± 40 nm) was chosen as the light source to ensure that all the ingredients and dyes in soft drinks will not interfere by contributing light absorption. A linear calibration was obtained for sucrose over a wide concentration range (3.1-46.5 Brix). The same module can be used to monitor the color of the soft drink as well as the dissolved CO₂ during production. For measuring the color, the sample is segmented between air plugs to avoid dispersion. An RGB-LED was chosen as the light source in order to make this module applicable to a wide range of colored samples. The module also has a section where dissolved CO₂ is measured via vaporization of the gas from the liquid phase. Dissolved CO₂, in a flowing acceptor stream of water resulting in the change of the acceptor conductivity, is detected using an in-house capacitively coupled contactless conductivity detector (C⁴D). The module includes a vaporization unit that is also used to degas the carbonated drink, prior the measurements of sucrose and color within the same system. The method requires no chemicals and is therefore completely friendly to the environment.     

A Generalized Method for the Synthesis of Carbon-Encapsulated Fe3O4 Composites and Its Application in Water Treatment

In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe₃O₄ composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe₂O₃ as the precursors. The morphologies of the as-prepared C@Fe₃O₄ composites, inherited from their corresponding precursors of α-Fe₂O₃, survived from the annealing treatments, were characterized by the field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The C@Fe₃O₄ composites resisted to oxidation, acidification and aggregation, exhibiting porous structures and ferromagnetic properties at room temperature. Moreover, the adsorption performance of the C@Fe₃O₄ composites was evaluated by absorbing MB (methylene blue) in liquid environment. Experiments indicated that the C@Fe₃O₄ composites exhibited highly enhanced adsorption capacities and efficiencies as compared with their corresponding precursors of α-Fe₂O₃. This generalized method for the synthesis of C@Fe₃O₄ composites provides promising applications for the highly efficient removal of MB from industrial effluents.     

Synthesis, structural characterization and antimicrobial activity evaluation of metal complexes of sparfloxacin

The synthesis and characterization of binary Cu(II)- (1), Co(II)- (2), Ni(II)- (3), Mn(II)- (4), Cr(III)- (5), Fe(III)- (6), La(III)- (7), UO₂(VI)- (8) complexes with sparfloxacin (HL₁) and ternary Cu(II)- (9), Co(II)- (10), Ni(II)- (11), Mn(II)- (12), Cr(III)- (13), Fe(III)- (14), La(III)- (15), UO₂(VI)- (16) complexes with sparfloxacin (HL₁) and dl-alanine (H₂L₂) complexes are reported using elemental analysis, molar conductance, magnetic susceptibility, IR, UV–Vis, thermal analysis and ¹H-NMR spectral studies.The molar conductance measurements of all the complexes in DMF solution correspond to non-electrolytic nature.All complexes were of the high-spin type and found to have six-coordinate octahedral geometry except the Cu(II) complexes which were four coordinate, square planar and U- and La-atoms in the uranyl and lanthanide have a pentagonal bipyramidal coordination sphere. The antimicrobial activity of these complexes has been screened against two Gram-positive and two Gram-negative bacteria. Antifungal activity against two different fungi has been evaluated and compared with reference drug sparfloxacin. All the binary and ternary complexes showed remarkable potential antimicrobial activity higher than the recommended standard agents. Ni(II)- and Mn(II) complexes exhibited higher potency as compared to the parent drug against Gram-negative bacteria.     

Pilot-plant for NOx, SO2 and HC removal from flue-gas of municipal waste incinerator by electron beam irradiation

According to the basic research performed using a small size reactor at TRCRE of JAERI, the electron beam irradiation process was proved to be very effective for NO_x, SO₂ and HC removals from flue-gas of municipal waste incinerators. Based on this result, a pilot-plant was constructed for the demonstration of NO_x, SO₂ and HC removal performance using electron accelerator of maximum energy 0.95 MeV and maximum power 15kW.The pilot-plant was constructed at Matsudo City waste Disposal Center. The flue-gas of 1,000 Nm³/hr is guided from the waste incinerator flue-gas line of 30,000Nm³/hr to the pilot-plant to be processed by spraying Ca(OH)₂ slurry or powder and irradiation with high-energy electron beam of the accelerator. NO_x, SO₂ and HC are removed simultaneously from the flue-gas by the enhanced reaction with Ca (OH)₂ under irradiation.A brief explanation of the pilot-plant and preliminary results of the experiments are introduced in this paper.