Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Electrophilic aromatic addition reaction (AdEAr) to anthracene

After finding in a previous study that naphthalene and quinoline can react via electrophilic aromatic addition reaction (Ad_EAr), we applied this to anthracene. When anthracene was reacted with bromine in methanol in the presence of NaHCO₃ and pyridine, 9,10-dihydro-9,10-dimethoxyanthracene (2) was obtained in 82% yield in the absence of substitution products or oxidative demethylation products like anthraquinone. The same reaction in ethanol produced 9,10-diethoxy-9,10-dihydroanthracene (9) in much lower yield (45%). In addition, we investigated the reactivity of addition product 2. Treatment of 2 with DDQ in benzene at 65 °C for 12 h produced 9,10-dimethoxyanthracene (3) in 62% yield, and 2 was rapidly transformed to 9-methoxyanthracene (4) in methanolic NaOH in 10 min. Moreover, the acid-catalyzed aromatization of 2 in 1-propanol at 75 °C for 10 min gave 9-n-propoxyanthracene (8) in 65% yield.     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Synthesis,characterization and crystal structure of new silver(I) and palladium(II) complexes containing 1,2,4-triazole moieties

The reaction of 4-amino-5-ethyl-2H-1,2,4-triazole-3(4H)-thione (AETT, L1) with 2-thiophen carbaldehyde in methanol leads to the corresponding Schiff-base HL1a. The reaction of L1 with AgNO₃ in ethanol gives the ionic complex [{[Ag(L1)]NO₃}₂]_n (1). The ionic complex [(PPh₃)₂Ag(HL1a)₂]NO₃ · CH₃CN (2) can be obtained by the reaction of HL1a with [(PPh₃)₂Ag]NO₃ in methanol and acetonitrile solution, while its reaction with [(PPh₃)₂PdCl₂] in the presence of sodium acetate in methanol leads to the neutral complex [(PPh₃)₂Pd(L1a)₂] · 4MeOH (3). All the compounds were characterized by infrared spectroscopy, elemental analyses as well as by X-ray diffraction studies.     

Comparison of the electrophilic and free-radical addition of halogens with hexafluoro-1,3-butadiene and 1,3-butadiene

Ionic and photochemical reaction of chlorine (Cl₂), bromine (Br₂) and iodine monochloride (ICl) to hexafluoro-1,3-butadiene (1) and 1,3-butadiene (2) were carried out under conditions that would provide product distributions under controlled ionic or free-radical conditions. Product distributions for ionic reaction of Cl₂ and Br₂ with 1 are similar and suggest a weakly-bridged halonium ion species. Theoretical calculations support weakly-bridged chloronium and bromonium ions for both dienes 1 and 2. There are more of the 1,4-dihalo-2-butene products from ionic halogenation of 1 than 2 which correlates with the greater charge density on carbon-4 of halonium ions from 1. Ionic and free-radical reactions of ICl with 1 give 8 and 2% of 3-chloro-4-iodohexafluoro-1-butene and 4-chloro-3-iodohexafluoro-1-butene, respectively. The minor cis-1,4-dihalo-2-butene products from 1 and 2 are reported when formed.     

Sodium dithionite initiated fluoroalkylation of trimethoxybenzenes, mesitylene and pyrroles with BrCF2CF2Br

Sodium dithionite initiated reaction of 1,2-dibromotetrafluoroethane with 1,3,5-trimethoxybenzene (1a) in an acetonitrile-water mixture proceeded efficiently at ambient temperature to give 1-(2-bromotetrafluoroethyl)-2,4,6-trimethoxybenzene (2) almost quantitatively. Similar reaction with 1,2,3-trimethoxybenzene (1b) gave only reasonable yield of regioisomers of (2-bromotetrafluoroethyl)-trimethoxybenzenes 3 and 4 and small amount of a substitution product of the central trimethoxy group, 1-(2-bromotetrafluoroethyl)-2,6-dimethoxybenzene (5). The reaction with mesitylene (6) gave complex mixtures from which, depending on the temperature and a mesitylene/BrCF₂CF₂Br ratio, the expected (2-bromotetrafluoroethyl)mesitylene (8) or a dimeric product, 4,4′-bis(2-bromo-1,1,2,2-tetrafluoroethyl)-1,3,5,1′,3′,5′-hexamethylbicyclohexyl-2,5,2′,5′-tetraene (7), were isolated in a yield of 18 and 13%, respectively. The reactions of BrCF₂CF₂Br with pyrrole (9) and 1-methylpyrrole (11) gave the respective alkylated compounds, 2-(2-bromotetrafluoroethyl)pyrrole (10) and 2-(2-bromotetrafluoroethyl)-1-methylpyrrole (12) in over 70% yields; the former was found to be fairly unstable. The reactivity of the terminal bromine atom in 1-(2-bromotetrafluoroethyl)-2,4,6-trimethoxybenzene (2) was also investigated.     

Study the reactions of fluoroalkanesulfonyl azides with N-alkylindoles

The reactions of fluoroalkanesulfonyl azides R_fSO₂N₃1 with N-alkylindoles 2 have been studied in detail. It was found that both solvent and the amount of the azides seriously affected the product distribution. 1 reacted with equimolar of 2 in ether or 1,4-dioxane affording 2-(N-substituted-indolinylidene)fluoroalkane sulfonylimines 3 as major product; While, treatment of 2 with 2 equiv. of 1 in ethanol, an unexpected product N-substituted-2-fluoroalkanesulfonimino-3-diazo-indolines 4 were obtained in good yield. The reaction mechanism was discussed.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Cation-anion interactions involving hydrogen bonds: Syntheses and crystal structures study of hexafluorotitanate(IV) salts with pyridine and methyl substituted pyridines

Fluorotitanates (LH)₂[TiF₆]·nH₂O (1: R = pyridine, n = 1, 2: R = 2-picoline, n = 2, 3: R = 2,6-lutidine, n = 0, 4: R = 2,4,6-collidine, n = 0) and (LH)[TiF₅(H₂O)] (3a: L = 2,6-lutidine) have been synthesized by the reaction of pyridine or corresponding methyl substituted pyridines and titanium dioxide dissolved in hydrofluoric acid. The crystal structures of ionic compounds 1, 2, 3, 3a and 4 have been determined by single-crystal X-ray diffraction analysis. The hydrogen bonding led to the formation of discrete (LH)₂[TiF₆] units (4), chains (1-3), and layers (3a). The additional π-π interactions present in 1, 2, and 4 results in chain structures of 1 and 4 and in a layer structure of 2. The [TiF₆]²⁻ and [TiF₅(H₂O)]⁻ anions were observed by ¹⁹F NMR spectroscopy in aqueous solutions of 1, 2, 3, 3a and 4.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Efficient approach to allylated quinolines via palladium-catalyzed cyclization–allylation of 1-azido-2-(2-propynyl) benzenes with allyl methyl carbonate

The palladium-catalyzed cyclization–allylation reaction of ortho-azido propynylbenzenes 1 and allyl methyl carbonate 2d gives the corresponding allylated quinolines in moderate to good yields. The reaction of 1-azido-2-(2-propynyl)benzene 1a proceeds smoothly with 10 mol % Pd(PPh₃)₄ and 5 equiv K₃PO₄ or NaOAc in DMF at 100 °C to afford 3,4-diallylquinoline 3a in 69% yield in the case of R² = H and 3-allylquinoline 4 in 67% yield in the case of R² ≠ H.     

Copper/sodium-directed hydrolytic condensation of methyltriethoxysilane: Self-assembly of polyhedral Cu/Na-methylsiloxane. Synthesis and properties of new stereoregular macrocyclosiloxane

A hydrolytic condensation of methyltriethoxysilane was performed in the presence of sodium and copper ions. A crystalline copper/sodium-methylsiloxane of a general formula {Na₄[(MeSi(O)O)₁₂Cu₄]} · 6(n-BuOH) (1a) was obtained as the only product in a high yield. X-ray analysis of a single crystal obtained after recrystallization of 1a by slow diffusion of methanol vapours into its ethanol solution was characterised as {Na₄[(MeSi(O)O)₁₂Cu₄]} · 4(MeOH) · 4(EtOH) (1b). In the crystal molecules are assembled into zig-zag chains by O-H?O bonds. Removal of metal ions by a reaction of 1a or 1b with Me₃SiCl gave a new siloxane macrocycle tris-cis-tris-trans-dodecamethyldodecatrimethylsiloxycyclododecasiloxane, [MeSi(O)OSiMe₃]₁₂ (2), in a high yield.     

Tosylation/mesylation of 4-hydroxy-3-nitro-2-pyridinones as an activation step in the construction of dihydropyrido[3,4-b] benzo[f][1,4]thiazepin-1-one based anti-HIV agents

Reaction of 4-hydroxy-3-nitropyridinone 8 with TsCl and MsCl, respectively, resulted in rapid and quantitative formation of ditosylate 13 and dimesylate 16. Through chemoselective reaction of 16 with thiophenol 17 the key 4-thioaryl substituted intermediate 18 was obtained in 78% yield. This compound was efficiently converted to the target tricyclic products 4a and b. Compound 4a, in particular, is a potent inhibitor in vitro (IC₅₀ = 2 nM) of wild type HIV-1 replication.     

Synthesis, characterization and reactivity of a zwitterionic amine bridged bis(phenolate) lanthanide complex

A zwitterionic amine bridged bis(phenolate) ytterbium(III) complex was synthesized, and its reactivity with a zinc cluster was explored. The reaction of (C₅H₅)₃Yb(THF) with the amine bridged bis(phenol) HONNOH [ONNO = Me₂NCH₂CH₂N{CH₂-(2-O-C₆H₂-Bu^t₂-3,5)}₂] in a 1:2 M ratio in toluene at 80 °C produced the zwitterionic ytterbium complex [ONNO]Yb[ONNO(μ₄-H)] (1) in a high isolated yield. The reaction of ZnEt₂ with 1 equiv of PhCH₂OH gave a zinc cluster Zn₇Et₆(OCH₂Ph)₈ (2) in a good isolated yield. Complex 1 reacted with complex 2 in a 7:1 M ratio at room temperature to afford the unexpected ligand redistributed product [ONNO]Zn(THF) (3). These complexes were well characterized by elemental analyses, IR spectra and NMR spectroscopy in the case of complexes 2 and 3. The definitive molecular structures of complexes 2 and 3 were determined by single-crystal X-ray analyses.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Lewis acid-promoted reactions of ethenetricarboxylates with γ-CF3-substituted propargyl alcohols

The Lewis acid-promoted reaction of an ethenetricarboxylate derivative (1) with CF₃-substituted propargyl alcohols has been examined. Reaction of γ-CF₃ propargyl alcohols in the presence of zinc bromide gave five-membered CF₃-containing tetrahydrofurans in 66-85% yield. The CF₃ group activates alkyne as an electron-withdrawing group. On the other hand, reaction of γ-trifluoromethyl-α-aryl propargyl alcohols 2 with 1 in the presence of 1 equiv of SnCl₄ gave cyclobutane derivatives 6 in 29-49% yield. Formation of cyclobutane 6a arises from the [2+2] cycloaddition between ethenetricarboxylate 1 and chloroallene 8, which is produced by the reaction of propargyl alcohol 2a and SnCl₄.     

Trimethylaluminium-induced diastereoselective methylation onto ethyl 2-oxocyclopentane-1-carboxylate and isomerization between the dimethylaluminium-alkoxide products

Methylation of α-disubstituted cyclopentanone 1 with Me₃Al in CH₂Cl₂ at 0 °C for 30 min gave diastereoselectively a mixture of (1R*,2S*)-2 and (1R*,2R*)-2 in a 96:4 ratio and 83% total yield. When the same methylation was carried out at 0 °C for 1 h and then at room temperature for 120 h, a diastereomeric mixture of (1R*,2S*)-2 and (1R*,2R*)-2 was obtained in a 12:88 ratio and in 88% total yield. The stereochemistry of the two diastereomers was determined by the results of acetalization of their diol derivatives 3 and 5. Isomerization between the Me₂Al-alkoxides of (1R*,2S*)-2 and (1R*,2R*)-2 and its possible mechanism were investigated by HPLC analysis of the methylation reaction process at 0 °C for 1 h and then at room temperature for 56 h and also by their mutual epimerization reactions.