Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea

Conversions of statins, 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitors, from lactone forms to their corresponding hydroxy acid form in 0.1 N NaOH or 0.05 N KOH (prepared with 25, 50, 75, 90% acetonitrile or methanol in water or 100% water) were evaluated. Results showed that lactone form statins could be transformed almost completely only in alkaline solutions prepared with 25 or 50% acetonitrile. In all methanolic alkaline solutions, lactone form statins could also be converted entirely, nevertheless, they would be further transformed to the methyl ester of the hydroxy acid form and the transformation increased as methanol rises. When lactone and hydroxy acid forms of statins were in methanol, ethyl acetate, 70% acetonitrile in water (with 0.5% acetic acid or no) for 0-48 h at room temperature or in 100 degrees C water for 0-2 h, lactone form statins were converted to their corresponding hydroxy acids, which were raised as time extends and the highest conversions of them were about 35% in 100 degrees C water and 70% acetonitrile, slightly transformed for lactone form statins in 70% acetonitrile (with 0.5% acetic acid) after 8 h, and the other treatments for all statins showed no significant changes. Interferences would be reduced efficiently when statins were extracted from Pu-Erh tea with methanol, ethyl acetate or 100 degrees C water followed by purifying through a C18 solid-phase extraction cartridge. Lovastatin was the only statin found in Pu-Erh tea and the highest content of it was found under ethyl acetate extraction. In ethyl acetate and methanol extracts, lovastatin existed merely as lactone form. The lowest content of lovastatin was found in the 100 degrees C water extract of Pu-Erh tea, however, both of lactone and hydroxy acid forms were found to exist in the extract.     

Discrimination of biofilm samples using pattern recognition techniques

Biofilms are complex aggregates formed by microorganisms such as bacteria, fungi and algae, which grow at the interfaces between water and natural or artificial materials. They are actively involved in processes of sorption and desorption of metal ions in water and reflect the environmental conditions in the recent past. Therefore, biofilms can be used as bioindicators of water quality. The goal of this study was to determine whether the biofilms, developed in different aquatic systems, could be successfully discriminated using data on their elemental compositions. Biofilms were grown on natural or polycarbonate materials in flowing water, standing water and seawater bodies. Using an unsupervised technique such as principal component analysis (PCA) and several supervised methods like classification and regression trees (CART), discriminant partial least squares regression (DPLS) and uninformative variable elimination–DPLS (UVE-DPLS), we could confirm the uniqueness of sea biofilms and make a distinction between flowing water and standing water biofilms. The CART, DPLS and UVE-DPLS discriminant models were validated with an independent test set selected either by the Kennard and Stone method or the duplex algorithm. The best model was obtained from CART with 100% correct classification rate for the test set designed by the Kennard and Stone algorithm. With CART, one variable describing the Mg content in the biofilm water phase was found to be important for the discrimination of flowing water and standing water biofilms.     

Drinking water quality from the aspect of element concentrations

Summary Drinking water in developed countries is usually treated by the water-purification system, while in developing countries untreated natural water such as well water, river water, rain water, or pond water are used. On the other hand, many kinds of mineral water bottled in plastic containers are sold as drinking water with or without gas in urban areas in many countries. Seawater under hundreds meters from the surface is also bottled and sold as drinking water with advertising good mineral balance. Various element concentrations in water samples for drinking were analyzed, and then it was considered the effects of elements on human health.     

Supramolecular assemblies of a series of 2-arylbenzimidazoles at the air/water interface: in situ coordination, surface architecture and supramolecular chirality

The spreading behavior and supramolecular assemblies of some arylbenzimidazoles with 2-substituted aromatic groups such as phenyl, naphthyl, anthryl and pyrenyl on water surface and the subphase containing AgNO3 were investigated. It was observed that although these compounds lack long alkyl chains, they showed surface activity when spread from chloroform solution on water surface and formed the supramolecular assemblies. When AgNO3 was present in the subphase, a coordination between the imidazole group of the compounds and Ag(I) occurred in situ in the spreading film, which was verified by the surface pressure/area (pi-A) isotherms and UV/Vis absorption spectra. Both the spreading films from water and the aqueous AgNO3 subphase were transferred onto solid substrates and their surface morphologies as well as properties were characterized by AFM, UV/Vis absorption and CD spectra. Various surface morphologies such as nanoparticles, block domains and nanoutensils were observed depending on the substituted aromatic groups. Interestingly, although all of these compounds were achiral, supramolecular chirality was obtained for some of the arylbenzimidazole films assembled from either the water surface or the subphase containing AgNO3. It was revealed that chiral assemblies could be obtained from water surface for the benzimidazoles which have pyrenyl or alpha-naphthyl groups. For benzimidazole derivative with anthryl group, chiral assemblies could be obtained when spreading on the aqueous AgNO3 subphase. For the benzimidazoles with phenyl or beta-naphthyl groups, no chirality was obtained. It was suggested that both the overcrowded stacking of the aromatic groups and the cooperative arrangement of the molecules on water surface or aqueous AgNO3 subphase play a crucial role in forming the chiral supramolecular assemblies.     

Two OPEEs (organic phase enzyme electrodes) used to check the percentage water content in hydrophobic foods and drugs.

The development and optimization of an analytical method using enzymatic biosensors able to operate in organic solvents [organic phase enzyme electrodes (OPEEs)] for the determination of the water content in food fats (butter, margarine) or pharmaceutical or cosmetic ointments is described. The method is based on the increase in enzymatic activity which is related to the increase in the percentage water content in the organic phase into which the biosensor is dipped. The enzymes used to assemble the biosensors were tyrosinase or catalase, the substrates were phenol or p-cresol and tert-butyl hydroperoxide, respectively, and the organic solvents were acetonitrile or dioxane. A gas diffusion amperometric electrode for oxygen measurement was used as electrochemical transducer. The results were compared with those obtained applying the Karl Fischer method to the same food or drug matrices. The correlations among the two methods proved satisfactory, as the difference in the computed values of water content was never higher than 7%. Also, the precision of measurements was acceptable (RSD < 6%) in all the analyses of real matrices.     

Radon Removal from Different Types of Groundwater Applying Granular Activated Carbon Filtration

Granular activated carbon (GAC) filters were installed in 12 private homes or vacation homes for removing unacceptably high concentrations of radon from household water. Radon removal efficiency was nearly 100% in most locations, although different water types were encountered. Other radionuclides such as uranium, radium, lead and polonium were removed less efficiently. Treated water quality remained good and no significant external radiation dose was caused to the residents.     

Interaction of mineral surfaces with simple organic molecules by diffuse reflectance IR spectroscopy (DRIFT)

The adsorption of simple organic molecules to mineral surfaces was investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) and by solution chemical analysis. Salicylic acid, myristic acid or octacosane were deposited from water or hexane onto gamma-alumina and kaolinite, and examined without evacuation or blending with KBr. The DRIFTS results replicated those from ATR-IR, where available, supporting the validity of DRIFTS as a versatile and convenient alternative to ATR. Results were obtained for coverage as low as 0.02 molecules/nm(2). Monolayer coverage on gamma-alumina was determined from spectra as 0.7 molecules/nm(2) for salicylic acid, confirmed by solution analysis, and 2 molecules/nm(2) for myristic acid. Spectral features of salicylic acid deposited on gamma-alumina from hexane were not distinguishable from those deposited from water. In almost all cases, spectral features associated with the carboxyl moiety were substantially altered, indicating a significant role in the adsorption mechanism. Adsorption of salicylic acid from hexane onto kaolinite was also as carboxylate, but myristic acid showed both carboxylate and carbonyl. The results from using hexane as solvent compared to water suggest that surface-adsorbed hydroxyl and molecular water, present on mineral oxides under ambient conditions, may be a key determinant of the adsorbate architecture.     

A sensitive gas chromatographic-tandem mass spectrometric method for detection of alkylating agents in water: application to acrylamide in drinking water,coffee and snuff

A sensitive analytical method for the analysis of acrylamide and other electrophilic agents in water has been developed. The amino acid L-valine served as a nucleophilic trapping agent. The method was applied to the analysis of acrylamide in 0.2-1 mL samples of drinking water or Millipore-filtered water, brewed coffee, or water extracts of snuff. The reaction product, N-(2-carbamoylethyl)valine, was incubated with pentafluorophenyl isothiocyanate to give a pentafluorophenylthiohydantoin (PFPTH) derivative. This derivative was extracted with diethyl ether, separated from excess reagent and impurities by a simple extraction procedure, and analyzed by gas chromatography-tandem mass spectrometry. (2H3)Acrylamide, added before the reaction with L-valine, was used as internal standard. Acrylamide and the related compound, N-methylolacrylamide, gave the same PFPTH derivative. The concentrations of acrylamides were < or = 0.4 nmol L(-1) (< or = 0.03 microg acrylamide L(-1)) in water, 200 to 350 nmol L(-1) in brewed coffee, and 10 to 34 nmol g(-1) snuff in portion bags, respectively. The precision (the coefficient of variation was 5%) and accuracy of the method were good. The detection limit was considerably lower than that of previously published methods for the analysis of acrylamide.     

Pre-formulation studies on moisture absorption in microcrystalline cellulose using differential thermo-gravimetric analysis

A study on the differential thermo-gravimetric (DTG) measurements of microcrystalline cellulose (MCC) containing moisture indicated that particle size affected the amount of bound water and the flow indices. Thermal analysis of 6 commercial grades of MCC powders and MCC/water blends were performed using a thermo-gravimetric analyzer. These MCCs were differentiated by their particle size, bulk and tapped densities, crystallinity and micromeritic properties. From the DTG curves, it was observed that water loss from the MCC/water blends occurred in 3 phases which corresponded to the different states of water associated with the solid particles. Area under the third phase, or the falling rate phase, can be associated with the release of water that was physically shielded or bound to the solid. This water may be referred to as "structured" water. The large particle size grades of MCC-Avicel PH 102, PH 302 and Pharmacel 102 were found to possess smaller quantities of structured water. Water vapor sorption results revealed the monolayer capacities for the respective MCC grades. The amount of structured water appeared to correspond to the existence of bilayers on the surface of the small particle size MCC grades. Using the avalanche flow assessment method, flow properties of small particle size grades of MCC were found to be poorer as indicated by the significant correlation between their flow indices and size, in addition to the longer mean times to avalanche.     

Lecithin organogels used as bioactive compounds carriers. A microdomain properties investigation

Organogels were obtained by adding small amounts of water to a solution of lecithin in organic solvents. Either isooctane or isopropyl palmitate and isopropyl myristate were used as the continuous organic phase of the gels. EPR spectroscopy using both DSA membrane-sensitive and lipophilic spin probes was applied to define the dynamic structure of the surfactant monolayer and the continuous oil phase of lecithin organogels. It was found that by increasing the water quantity, an increase of the polar head area per lecithin molecule was induced, and as a consequence the total interface expanded. It was found that the use of esters as organic solvents induced a decrease of the size of the dispersed structures. The interconnection of the aqueous microdomains and their dynamics were monitored by both static and time-resolved fluorescence quenching spectroscopy using Ru(bipy)32+ as fluorophore and Fe(CN)63- as quencher. It was found that the rates of inter- and/or intra-micellar exchange of water molecules were very slow because they appeared quite immobilized close to the lecithin polar heads. According to the results of the dynamic studies, appropriate organogels were formulated and used to incorporate model bioactive compounds with medicinal or cosmetic interest such as caffeine and theophylline. When these systems were tested for trans-membrane diffusion, they showed a 24 h permeation of 20% and 35%, respectively.     

Physicochemical investigations of microemulsification of coconut oil and water using polyoxyethylene 2-cetyl ether (Brij 52) and isopropanol or ethanol

The microemulsification of coconut oil/polyoxyethylene 2-cetyl ether/2-propanol or ethanol/water was investigated. The phase behaviors of the mixed system were examined. The shear viscosity at different temperatures was measured to derive activation parameters for the viscous flow. The diffusion coefficient of the microemulsions at different compositions was determined by the DLS method. The energetics of solubilization of water into oil + Brij + alkanol as well as of oil into water + Brij + alkanol forming w/o and o/w microemulsions, respectively, were calorimetrically determined.     

One-step advanced preparation of surface-functional peptide nanospheres by the polymerization of L-phenylalanine N-carboxyanhydride with dual initiators

Surface-grafted peptide nanospheres consisting of hydrophobic poly(L-phenylalanine) with hydrophilic poly(ethylene glycol) (PEG) grafts were successfully prepared by the one-step polymerization of L-phenylalanine N-carboxyanhydride with the dual initiators of hydrophobic n-butylamine and hydrophilic NH2-monoterminated PEG (NH2-PEG). The monodispersed peptide nanospheres were stably self-assembled during polymerization in a mixture of water/dimethyl sulfoxide to create a colloidal solution, but only aggregated in water or organic solvents. When n-butylamine or NH2-PEG was used as a solitary initiator, the peptide nanospheres were not formed. The peptide nanospheres showed high dispersion-stability in water, and their diameter was approximately 300 nm. Furthermore, the peptide nanospheres were well-redispersed in water, retaining the same diameter and monodispersity even after lyophilization. Peptide nanospheres with the functional carboxylic acid on their graft layer were also successfully prepared by the one-step preparation method. This one-step preparation method of surface-grafted peptide nanospheres will be useful as an advanced technology to develop biodegradable functional nanospheres.     

Obtaining Bioactive Compounds from the Coffee Husk (Coffea arabica L.) Using Different Extraction Methods

Coffee husks (Coffea arabica L.) are characterized by exhibiting secondary metabolites such as phenolic compounds, which can be used as raw material for obtaining bioactive compounds of interest in food. The objective of this study is to evaluate different methods for obtaining the raw material and extracting solutions of bioactive compounds from coffee husks. Water bath and ultrasound-assisted extraction methods were used, using water (100%) or ethanol (100%) or a mixture of both (1:1) as extracting solutions and the form of the raw material was in natura and dehydrated. The extracts were evaluated by their antioxidant potential using DPPH radicals, ABTS, and iron reduction (ferric reducing antioxidant power (FRAP)), and later total phenolic compounds, total flavonoids, and condensed tannins were quantified the phenolic majority compounds were identified. It was verified that the mixture of water and ethanol (1:1) showed better extraction capacity of the compounds with antioxidant activity and that both conventional (water bath) or unconventional (ultrasound) methods showed satisfactory results. Finally, a satisfactory amount of bioactive compounds was observed in evaluating the chemical composition (total phenolic compounds, total flavonoids, condensed tannins, as well as the analysis of the phenolic profile) of these extracts. Corroborating with the results of the antioxidant activities, the best extracting solution was generally the water and ethanol mixture (1:1) using a dehydrated husk and water bath as the best method, presenting higher levels of the bioactive compounds in question, with an emphasis on chlorogenic acid. Thus, it can be concluded that the use of coffee husk as raw material to obtain extracts of bioactive compounds is promising. Last, the conventional method (water bath) and the water and ethanol mixture (1:1) stood out among the methods and extracting solutions used for the dehydrated coffee husk.     

用荧光方法研究端基为芘的聚苯乙烯在溶液中的聚集行为

利用原子转移自由基聚合（ATRP） 方法合成了窄分布的端基含有芘或萘的聚 苯乙烯（Py-PS和Na-PS）。研究了Py-PS在四氢呋喃（THF）溶液中的荧光发射光谱 随加水量的变化。结果表明,加水初期随着加水量的增加,对应于芘的单体荧光发 射峰强度（I_M）增加,当水加到一定量时,观察到由芘形成的激基缔合物（ excimer）的荧光光谱峰,其强度（I_E）随加水量的增加而进一步增强,而I_M下 降,直至体系产生宏观的相分离,此时I_M和I_E均不变。对这一结果从分子水平上 进行了讨论,并通过I_E/I_M与I_1/I_3随加水量的变化得到了不同浓度下Py-PS在 THF中聚集的临界加水量。另外,我们也用非辐射能量转移（NRET）的方法研究了 Py-PS混合溶液的聚集。这些结果对于进一步研究含聚苯乙烯链段的嵌段共聚物在 溶液中的聚集有重要意义。     

Screening and identification of unknown contaminants in water with liquid chromatography and quadrupole-orthogonal acceleration-time-of-flight tandem mass spectrometry

In order to assess and maintain the quality of surface waters, target compound monitoring is often not sufficient. Many unknown micro-contaminants are present in water, originating in municipal, industrial or agricultural effluents. Some of these might pose a risk to drinking water production and consequently to human health. The possibilities of screening surface water and identification of these non-target water pollutants with modern data acquisition possibilities of hybrid quadrupole-orthogonal acceleration time of flight mass spectrometers (Q-TOF), such as data-dependent MS to MS/MS switching were investigated. Using model compounds, a procedure for the liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening of water extracts was developed, enabling the detection and identification of compounds at levels < or = 0.25 microg/l in surface water. Based on the accurate mass the elemental compositions for the precursor and product ions are calculated. The calculated chemical formulae are searched against the Merck index, the NIST library, an own database containing about 2,500 water pollutants (pesticides and other contaminants) as well as a CI-CID library containing tandem MS spectra of about 100 water contaminants. The developed approach was applied for the identification of unknown compounds, present in native surface water extract. For three of these compounds, structures were proposed. Confirmation of the proposed structures with standards was beyond the scope of this study.     

Importance of bound water in hydration-dehydration behavior of hydroxylated poly(N-isopropylacrylamide)

In this study, a differential scanning calorimetric analysis was performed to investigate the role of water existing around the polymer chains on their thermoresponsive behaviors using the novel functional temperature-sensitive copolymer, poly(N-isopropylacrylamide-co-2-hydroxyisopropylacrylamide) (poly(NIPAAm-co-HIPAAm)). The HIPAAm comonomers were incorporated into the polymeric chains as hydrophilic parameters, and then the hydration states of poly(NIPAAm-co-HIPAAm) with various HIPAAm compositions were examined. Bound water, which is affected by the polymeric chains to some extent, was produced by adding the copolymers to the water, and the temperature due to the melting of the bound water decreased as the HIPAAm content increased. On the basis of this result, we considered that the interaction between the bound water and the polymeric chains is reinforced by the increasing HIPAAm composition. In addition, the cloud points of the copolymers shifted to a higher temperature, and the endothermic enthalpy for the phase transition decreased with increasing the HIPAAm content, suggesting that the number of water molecules disassociated from the polymeric chains decreased. Based on these results, we postulate that the changes in the interaction between the thermosensitive polymer and bound water exert a strong influence on its phase transition and/or separation, such as the cloud point or dehydration behavior.     

Recovery of atrazine, bromacil, chlorpyrifos, and metolachlor from water samples after concentration on solid-phase extraction disks: interlaboratory study

An interlaboratory comparison was conducted in 1997 and 1998 to examine the feasibility of using C18 solid-phase extraction disks (Empore) to simultaneously determine the herbicides atrazine, bromacil, and metolachlor and the insecticide chlorpyrifos in water samples. A common fortification source and sample processing procedure were used to minimize variation in initial concentrations and operator inconsistencies. The protocol consisted of paired laboratories in different locations coordinating their activities and shipping fortified water samples (deionized or local surface water) or Empore disks on which the pesticides had been retained and then quantitating the analytes by a variety of gas chromatographic methods. Average recoveries from all laboratories were >80% for atrazine, bromacil, and metolachlor, and >70% for chlorpyrifos. Detection of bromacil was unachievable at some locations because of chromatographic problems. Shipping samples between cooperating laboratories did not affect the recovery of atrazine, chlorpyrifos, or metolachlor in either matrix. Recoveries tended to be higher from disks shipped to cooperating laboratories compared with those from fortified water. Shipping disks eliminated many problems associated with the shipment of water samples, such as bottle breakage, higher shipping cost, and possible pesticide degradation. Recoveries of bromacil and metolachlor were lower from fortified surface water samples than from fortified deionized water samples. This collaborative research demonstrated that pesticides in water samples can be concentrated on solid-phase extraction disks at one location and quantitated under diverse analytical conditions at another location. The extraction efficiencies of the disks were comparable with or better than the recoveries obtained from the shipped water samples, and the problems associated with shipping water samples were eliminated by using the disks.     

Determination of microcystins in blue-green algae, fish and water using liquid chromatography with ultraviolet detection after sample clean-up employing immunoaffinity chromatography

Anti-microcystin LR immunnoaffinity cartridges were evaluated for their ability to selectively remove microcystins from extracts of blue-green algae, fish and water samples for subsequent analysis by liquid chromatography with UV absorbance detection at 238 nm. Blue-green algae and fish samples were extracted with 75% methanol in water. A portion of the extract was diluted and passed through an immunoaffinity cartridge. Water samples were applied directly to the cartridge. The cartridge was rinsed with water and 25% methanol in water. The microcystins were eluted with 80% methanol in water containing 4% acetic acid. It was found that the cartridges were effective in isolating the microcystins from blue-green algae, fish and water samples, resulting in extracts that were clean enough to enable direct LC-UV detection down to approximately 0.03 microg/g in the blue-green algae and fish samples, and as low as 0.02 ng/ml for water samples. The cartridges were found to have a capacity of approximately 200 ng each for a mixture of microcystins RR, YR, LR and LA, or as much as 525-800 ng for individual compounds. Recoveries trough the complete analytical procedure ranged from 64 to 115% (all values) with an overall average of approximately 80% at spiking levels of 0.5-4.0 microg/g for the microcystins in blue-green algae. The average recoveries (n=8) from spiked (0.1-0.5 microg/g) fish samples were 73% for RR, 79% for YR, 81% for LR and 77% for LA, while from the spiked (2.0-0.04 ng/g) tap and river water samples (n=6), recoveries were 78% for RR, 86% for YR, 94% for LR and 89% for LA.     

Effect of nonsolvents on properties of spinning solutions and polyethersulfone hollow fiber ultrafiltration membranes

The relationship among the presence of nonsolvent additives, the rheological behavior of spinning solutions and properties of hollow fiber membranes was studied. The additives tested were water, polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG), and the base mixture was polyethersulfone/N-methyl-2-pyrrolidone (PES–NMP). In addition the effect of combining water and PVP or PEG was also studied. Membranes were prepared using a spinneret having two concentric orifices. The internal coagulant used as well as the nonsolvent from the coagulation bath were both water at 28°C and 30°C, respectively. Rheological properties of polymer solutions were evaluated using a rheometer Haake RV 20. Changes on composition of spin-solutions were also evaluated in terms of membrane water permeability, solute rejection and membrane structure observed using scanning electron microscopy (SEM). Experimental results from this work showed that spinning solutions containing any of the three additives behave as Newtonian fluids in the range of shearing rates tested. The addition of water, PVP or PEG to the base PES–NMP solution increased its viscosity and this effect was independent of the type of additive used. A direct relation between viscosity of casting solutions and membrane thickness was found. However, rheological properties (viscosity and normal stress difference) could not be used to explain differences on membrane water flux (MWF) when using different additives at the same concentration. The addition of any of the three additives generally increased MWF. The extent of this increment seemed to be more related to changes on membrane porosity than changes on pore sizes induced by the nature and concentration of the additive used.