Ultra‐Narrow‐Band Blue‐Emitting Oxoberyllates AELi2[Be4O6]:Eu2+ (AE=Sr,Ba) Paving the Way to Efficient RGB pc‐LEDs

Highly efficient phosphor‐converted light‐emitting diodes (pc‐LEDs) are popular in lighting and high‐tech electronics applications. The main goals of present LED research are increasing light quality, preserving color point stability and reducing energy consumption. For those purposes excellent phosphors in all spectral regions are required. Here, we report on ultra‐narrow band blue emitting oxoberyllates AELi₂[Be₄O₆]:Eu²⁺ (AE=Sr,Ba) exhibiting a rigid covalent network isotypic to the nitridoalumosilicate BaLi₂[(Al₂Si₂)N₆]:Eu²⁺. The oxoberyllates’ extremely small Stokes shift and unprecedented ultra‐narrow band blue emission with fwhm ≈25 nm (≈1200 cm^?1) at λ_em=454–456 nm result from its rigid, highly condensed tetrahedra network. AELi₂[Be₄O₆]:Eu²⁺ allows for using short‐wavelength blue LEDs (λ_em<440 nm) for efficient excitation of the ultra‐narrow band blue phosphor, for application in violet pumped white RGB phosphor LEDs with improved color point stability, excellent color rendering, and high energy efficiency.     

一种上转换白光荧光粉的制备与发光性能研究

采用高温固相法制备了上转换白光荧光粉AlF3-YbF3:Er3+/Tm3+。通过XRD物相分析可知:上转换白光荧光粉AlF3-YbF3:Er3+/Tm3+是由三方AlF3相和正交YbF3相组成;利用发射光谱研究了该荧光粉的上转换发光性能,并且分析了当固定Er3+离子掺杂浓度时,Tm3+离子掺杂浓度对上转换白光荧光粉AlF3-YbF3:Er3+/Tm3+色度的影响,进而提出其上转换能量传递机制。结果表明:在980 nm激光激发下,波长为410 nm的紫光峰、550 nm的绿光峰和660 nm的红光峰分别对应于荧光粉中Er3+离子的2H9/2→4I15/2,4S3/2→4I15/2和4F9/2→4I15/2能级的跃迁,而波长为360 nm的紫外光峰、450 nm的蓝光峰、700 nm的红光峰,分别对应于荧光粉中Tm3+离子的1D2→3H6,1G4→3H6和1G4→3F4能级的跃迁,Er3+离子发出的光与Tm3+离子发出的光最终混合成色坐标为x=0.32,y=0.36的白光。此外,通过980 nm半导体激光器和EPM 2000 Dual-channel Joulemeter/Power meter测得该荧光粉最大上转换效率为6.90%。     

Efficient White‐Light Generation from Ionically Self‐Assembled Triply‐Fluorescent Organic Nanoparticles

Low cost, simple, and environmentally friendly strategies for white‐light generation which do not require rare‐earth phosphors or other toxic or elementally scare species remain an essentially unmet challenge. Progress in the area of all‐organic approaches is highly sought, single molecular systems remaining a particular challenge. Taking inspiration from the designer nature of ionic‐liquid chemistry, we now introduce a new strategy toward white‐light emission based on the facile generation of nanoparticles comprising three different fluorophores assembled in a well‐defined stoichiometry purely through electrostatic interactions. The building blocks consist of the fluorophores aminopyrene, fluorescein, and rhodamine 6G which represent blue, green, and red‐emitting species, respectively. Spherical nanoparticles 16(±5) nm in size were prepared which display bright white‐light emission with high fluorescence quantum efficiency (26 %) and color coordinate at (0.29, 0.38) which lie in close proximity to pure white light (0.33, 0.33). It is noteworthy that this same fluorophore mixture in free solution yields only blue emission. Density functional theory calculations reveal H‐bond and ground‐state proton transfer mediated absolute non‐parallel orientation of the constituent units which result in frustrated energy transfer, giving rise to emission from the individual centers and concomitant white‐light emission.     

新型全色发光材料NaCaPO4∶Dy3+制备及发光性能

釆用高温固相法制备了NaCaPO4∶Dy3+系列样品, 并在紫外(UV)及真空紫外(VUV)区域研究了系列样品的发光性能. 紫外激发光谱显示在350 nm处有最强的激发峰, 可以有效地吸收紫外光并将其转化为可见光. 真空紫外激发光谱表明, NaCaPO4∶Dy3+能有效地吸收无汞荧光灯的激发源并将其转化为可见光. 系列样品发光均呈现为白色, 这种材料有潜力作为全色显示材料应用于发光二极管(LED)和无汞荧光灯中.     

快速合成宽带激发、窄带发射白光LED用Li2CaSiO4∶Eu2+蓝-绿荧光粉

采用微波辅助法合成了蓝-绿色荧光粉Li2CaSiO4∶Eu2+,该荧光粉能很好的与紫外光及蓝光LED匹配。分别采用X射线衍射(XRD)、扫描电镜(SEM)和激发-发射光谱(PLE/PL)对样品进行了表征。X射线衍射数据与标准卡片PDF#27-290很好吻合。扫描电镜测试表明样品粒径在2~5μm。在紫外光和蓝光激发下,Li2CaSiO4∶1%Eu2+发射主峰位于478 nm,对应于Eu2+的t2g→8S7/2电子跃迁,半高峰宽31 nm。样品发光性能与Eu2+掺杂浓度有关,且Eu2+的最佳掺杂浓度为1%。合成的样品色坐标为(0.09,0.24),可作为白光LED用蓝-绿色荧光材料。     

全光谱白光发光二极管用Eu3+掺杂Ca2KZn2(VO4)3黄色荧光粉的制备及光学性能

基于蓝光芯片激发黄色荧光粉或近紫外芯片激发三基色荧光粉构建的白光发光二极管(WLED)在青光区域呈现明显的凹口,导致白光的色彩性能不够理想。为了弥补这一缺陷,实现全光谱白光,我们设计了Eu³⁺掺杂Ca₂KZn₂(VO₄)₃黄色荧光粉,其发射波长范围为400~750 nm。在387 nm激发下,在所制荧光粉中可同时获得来自VO₄^3-基团和Eu³⁺的发射光。Eu³⁺在Ca₂KZn₂(VO₄)₃基质中的最佳掺杂浓度(物质的量分数)为0.05,且VO₄^3-基团向Eu³⁺的能量传递效率达到64.9%。基于变温的发射光谱,揭示了所制荧光粉的热稳定性并发现VO₄^3-基团和Eu³⁺的激活能分别为0.538和0.510 eV。此外,将所制黄色荧光粉与商用蓝色荧光粉和近紫外芯片进行封装整合,得到可发射暖白光的WLED器件,其色温和显色指数分别为3843 K和85.8。     

Site‐Selective Occupancy of Eu2+ Toward Blue‐Light‐Excited Red Emission in a Rb3YSi2O7:Eu Phosphor

Establishing an effective design principle in solid‐state materials for a blue‐light‐excited Eu²⁺‐doped red‐emitting oxide‐based phosphors remains one of the significant challenges for white light‐emitting diodes (WLEDs). Selective occupation of Eu²⁺ in inorganic polyhedra with small coordination numbers results in broad‐band red emission as a result of enhanced crystal‐field splitting of 5d levels. Rb₃YSi₂O₇:Eu exhibits a broad emission band at λ_max=622 nm under 450 nm excitation, and structural analysis and DFT calculations support the concept that Eu²⁺ ions preferably occupy RbO₆ and YO₆ polyhedra and show the characteristic red emission band of Eu²⁺. The excellent thermal quenching resistance, high color‐rendering index R_a (93), and low CCT (4013 K) of the WLEDs clearly demonstrate that site engineering of rare‐earth phosphors is an effective strategy to target tailored optical performance.     

新型全色发光材料NaCaPO_4:Dy~(3+)制备及发光性能

釆用高温固相法制备了NaCaPO4∶Dy3+系列样品,并在紫外(UV)及真空紫外(VUV)区域研究了系列样品的发光性能.紫外激发光谱显示在350nm处有最强的激发峰,可以有效地吸收紫外光并将其转化为可见光.真空紫外激发光谱表明,NaCaPO4∶Dy3+能有效地吸收无汞荧光灯的激发源并将其转化为可见光.系列样品发光均呈现为白色,这种材料有潜力作为全色显示材料应用于发光二极管(LED)和无汞荧光灯中.     

无溶剂法大量制备高效红光碳点及其在白光器件中的应用

以邻苯二胺、 2,5-二氨基苯磺酸和三氯化铝为原料, 通过无溶剂法大量制备了高效的红色荧光碳点 (R-CDs). 制得的碳点尺寸大约为2.4 nm, 含有13%的氮元素, 主要由高度石墨化的碳核及覆盖在其表面的大量官能团构成. 在不同的波长光激发下, 碳点在乙醇溶液中表现出不依赖于激发的红光发射, 其荧光峰位于 704 nm, 最大量子产率达到22%. 由于R-CDs具有优异的光学性质, 利用其构筑了紫外光激发的碳基白色发光二极管, 其色坐标为(0.33, 0.33), 非常接近自然光. 该研究为高效红色荧光碳点的大量制备提供了一种新路径, 同时拓宽了其在白光器件中的应用.     

Highly effective synthesis and photoluminescence of Sr2Si5N8:Eu2+ red-emitting phosphor for LEDs

We developed a highly effective and self-sustaining route for synthesizing Sr(2)Si(5)N(8):Eu(2+) red-emitting phosphor particles for use in light emitting diodes (LEDs). The phosphors thus synthesized showed excellent emission characteristics under a blue excitation wavelength of 450 nm, had a uniform particle size distribution, and showed high performance in LED packages.     

Li2SrSiO4:Ce3+,Tb3+荧光粉的发光特性及Ce3+→Tb3+的能量传递

用固相反应法合成了具有单相的Li2EuSiO4结构的Li2Sr1-x-ySiO4:xCe3+,yTb3+系列样品。荧光光谱研究表明,Li2SrSiO4:Ce3+发射很强的蓝光,最强的激发峰位于360 nm;而Li2SrSiO4:Tb3+发射很强的绿光,最强的激发激发峰位于243 nm,但在350～410 nm的激发非常微弱。在Ce3+,Tb3+共掺杂的样品Li2Sr0.99-ySiO4:0.01Ce3+,yTb3+中,观察到Ce3+对Tb3+的共振能量传递。由于Ce3+对Tb3+能量传递,Tb3+的激发光谱中出现360 nm附近的宽激发峰。控制Tb3+/Ce3+掺杂浓度比可以实现绿蓝双基色的调制。这种双基色的荧光粉有望在紫外激发的白光LED中获得应用。     

Orange-emitting bimetallic nanoclusters combined with cyan-emitting Fe@TAOH as white light-emitting materials

White-light-emitting diodes（WLEDs） possess many merits, such as high efficiency and stability. Developing cost-effective, environmentally friendly, high-performance luminophores to achieve high-quality,full-spectrum, white lighting is of great importance to the construction and progress of WLEDs. In this work, solid-state, highly luminescent orange-emitting nanoclusters（MgCl₂-Lys-Ag/Au NCs） were prepared via the salt-induced precipitation of Lys-Ag/Au NCs from solution, which showed a...     

Sr2MgSi2O7∶Tb3+，Li+荧光粉的合成和发光机理

采用高温固相法合成Sr2-mMg1-nSi2O7∶mTb3+,nLi+(m=0.03~0.50,n=m)系列荧光粉。使用X射线衍射仪和荧光光谱仪对样品的物相和发光性质进行了表征。在377 nm紫外光激发下,荧光粉的发射光谱呈多谱带发射,主峰位于490 nm,542 nm,590 nm和613 nm处,分别对应于Tb3+的5D4→7FJ(J=6,5,4,3)跃迁发射。调节Tb3+离子掺杂浓度,可实现荧光粉的发光颜色从蓝到白、黄、绿的可调发射;名义组成为Sr1.95Mg0.95Si2O7∶0.05Tb3+,0.05Li+的荧光粉在紫外光(377 nm)激发下发白光,其色坐标(0.322,0.317)接近纯白光(0.33,0.33),是一种潜在的LED用单基质白光荧光粉。     

蓝光钙钛矿发光二极管:机遇与挑战

金属卤化钙钛矿由于具有优异的光电性能(如:高电子/空穴迁移率,高荧光量子产率,高色纯度,以及光色可调性等),成为应用于发光二极管(LED)的理想材料。近年来,钙钛矿LED的发展十分迅速,红光和绿光钙钛矿LED的外量子效率(EQE)均已超过20%。然而,蓝光(尤其是深蓝光)钙钛矿LED的EQE以及稳定性依然相对落后,这严重制约了钙钛矿LED在高性能、广色域显示领域和高显色指数白光照明领域的应用。因此,总结现阶段蓝光钙钛矿LED的发展,并剖析其机遇与挑战,对未来蓝光甚至整个钙钛矿LED领域的发展至关重要。本文将蓝光钙钛矿LED根据光色细分为天蓝光、纯蓝光、深蓝光三大部分进行总结,回顾了三种LED器件的发展历程,并详细阐述了现阶段实现他们的主要手段以及相关的基础原理,最后分析了它们各自的问题并提出了相应的解决思路。     

Double Perovskite Mn4+-Doped La2CaSnO6/La2MgSnO6 Phosphor for Near-Ultraviolet Light Excited W-LEDs and Plant Growth

Non-rare earth doped oxide phosphors with far-red emission have become one of the hot spots of current research due to their low price and excellent physicochemical stability as the red component in white light-emitting diodes (W-LEDs) and plant growth. Herein, we report novel Mn⁴⁺-doped La₂CaSnO₆ and La₂MgSnO₆ phosphors by high-temperature solid-phase synthesis and analyzed their crystal structures by XRD and Rietveld refinement. Their excitation spectra consist of two distinct excitation bands with the dominant excitation range from 250 to 450 nm, indicating that they possess strong absorption of near-ultraviolet light. Their emission is located around 693 and 708 nm, respectively, and can be absorbed by the photosensitive pigments Pr and Pfr, proving their great potential for plant growth. Finally, the prepared samples were coated with 365 nm UV chips to fabricate far-red LEDs and W-LEDs with low correlation color temperature (CCT = 4958 K/5275 K) and high color rendering index (R_a = 96.4/96.6). Our results indicate that La₂CaSnO₆:Mn⁴⁺ and La₂MgSnO₆:Mn⁴⁺ red phosphors could be used as candidate materials for W-LED lighting and plant growth.     

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Due to the difficulty in achieving high efficiency and high color purity simultaneously, blue emission is the limiting factor for the performance and stability of OLEDs. Since 2003, we have been working on organic light‐emitting diodes (OLEDs), especially on blue light. After a series of molecular designs, novel strategies have been proposed from different aspects. At first, highly efficient deep blue emission could be achieved through molecular design with highly twisted structure to suppress fluorescence quenching and redshift. Deep blue emitters with high efficiency in solid state, a twisted structure with aggregation induced emission (AIE) characteristics was incorporated to inhibit molecular aggregation, and triplet‐triplet fusion (TTF) and hybridized localized charge transfer (HLCT) were adopted to increase the ratio of triplet exciton used. Secondly, a highly efficient blue OLED could be achieved through improving charge transport. New electron transport materials (ETMs) with wide band gap were developed to control charge transport balance in devices. Thirdly, a highly efficient deep blue emission could be achieved through a mesoscopic structure of out‐coupling layer. A mesoscopic photonic structured organic thin film was fabricated on the top of metal electrode by self‐aggregation in order to improve the light out‐coupling efficiency.     

Novel Composites of Graphitic‐phase Nitrogen Carbon/Lanthanide Coordination Polymers as White Light‐emitting Phosphor

Lanthanide coordination polymers (Ln‐CPs) are excellent candidates for designing white light materials due to their adjustable fluorescent characteristic by decorating organic ligands, changing metal centers and including guests. However, low quantum yield, weak blue emission, high prices and supply risks have hindered the application and developments of the pure Ln‐CPs materials. Herein, we have designed a new white color composite material capable of white light‐emission upon excitation at 338 nm, which fabricated by compositing a graphitic‐phase nitrogen carbon (g‐C₃N₄) treated with nitric acid and lanthanide‐based complexes, with the photoluminescencequantum yield (QY) in solid state reaching 11.7 %. WLEDs constructed by depositing the (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt [dbpt = 3‐(3,5‐dicarboxylphenyl)‐5‐(pyrazinyl)‐1H‐1,2,4‐triazole] composites on a commercial UV LED chip feature a CIE chromaticity coordinate at (0.33, 0.33), high color rendering index (CRI) of 94.6. Compared to conventional white light‐emission Ln‐CPs materials of La_0.928Eu_0.045Tb_0.027‐dbpt and La_0.896Eu_0.104‐dbpt reveals that (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt composites have higher QY and CRI values.     

Abnormal Anti‐Quenching and Controllable Multi‐Transitions of Bi3+ Luminescence by Temperature in a Yellow‐Emitting LuVO4:Bi3+ Phosphor for UV‐Converted White LEDs

Phosphors with an efficient yellow‐emitting color play a crucial role in phosphor‐converted white LEDs (pc‐WLEDs), but popular yellow phosphors such as YAG:Ce or Eu²⁺‐doped (oxy)nitrides cannot smoothly meet this seemingly simple requirement due to their strong absorptions in the visible range. Herein, we report a novel yellow‐emitting LuVO₄:Bi³⁺ phosphor that can solve this shortcoming. The emission from LuVO₄:Bi³⁺ shows a peak at 576 nm with a quantum efficiency (QE) of up to 68 %, good resistance to thermal quenching (T_{50 %}=573 K), and no severe thermal degradation after heating–cooling cycles upon UV excitation. The yellow emission, as verified by X‐ray photoelectron spectra (XPS), originates from the (³P₀,³P₁)→¹S₀ transitions of Bi³⁺. Increasing the temperature from 10 to 300 K produces a temperature‐dependent energy‐transfer process between VO₄^3? groups and Bi³⁺, and further heating of the samples to 573 K intensifies the emission. However, it subsequently weakens, accompanied by blueshifts of the emission peaks. This abnormal anti‐thermal quenching can be ascribed to temperature‐dependent energy transfer from VO₄^3? groups to Bi³⁺, a population redistribution between the excited states of ³P₀ and ³P₁ upon thermal stimulation, and discharge of electrons trapped in defects with a trap depth of 359 K. Device fabrication with the as‐prepared phosphor LuVO₄:Bi³⁺ has proved that it can act as a good yellow phosphor for pc‐WLEDs.     

Crystal rigidifying strategy toward hybrid cadmium halide to achieve highly efficient and narrowband blue light emission

Highly efficient and narrowband blue light-emitting performance is extremely crucial for the optoelectronic applications of organic-inorganic hybrid perovskites. However, the not yet viable approach has been shown to simultaneously improve photoluminescence quantum yield (PLQY) and narrow linewidth of blue light emission. Herein, a new crystal rigidifying strategy is proposed as a viable dual-optimization avenue. Specifically, we perform a post-synthetic technique on hybrid cadmium halides and successfully convert zero-dimensional (0D) DMP-0-CdBr₄ to one-dimensional (1D) DMP-1-CdBr₃, accompanied by luminescent transformation from sky-blue (470 nm) to deep-blue (432 nm) emissions. The structural evolution from discrete block to infinite chain significantly enhances the crystal rigidity, which results in narrower emission linewidth (89 to 50 nm) and increased color purity (74.5% to 96.7%). Synchronously, the PLQY also realizes a notable enhancement from 14.0% to 52.3%. Systematical characterizations demonstrate that enhanced crystal rigidity simultaneously weakens the electron-phonon interaction and slows down nonradiative decay, which narrows the emission linewidth and boosts the PLQY. The highly efficient light-emitting performance enables them as excellent down-conversion blue phosphors to fabricate solid-state LED giving bright warm white light with high color rendering index of 95.4. This work paves a novel structural optimization way to rationally design or fine-tune high-performance blue-light emitting halides.     

Discovery of Key TIPS‐Naphthalene for Efficient Visible‐to‐UV Photon Upconversion under Sunlight and Room Light**

While many studies have been done on triplet–triplet annihilation‐based photon upconversion (TTA‐UC) to produce visible light with high efficiency, the efficient TTA‐UC from visible to UV light, despite its importance for a variety of solar and indoor applications, remains a challenging task. Here, we report the highest visible‐to‐UV TTA‐UC efficiency of 20.5 % based on the discovery of an excellent UV emitter, 1,4‐bis((triisopropylsilyl)ethynyl)naphthalene (TIPS‐Nph). TIPS‐Nph is an acceptor with desirable features of high fluorescence quantum yield and high singlet generation efficiency by TTA. TIPS‐Nph has a low enough triplet energy level to be sensitized by Ir(C6)₂(acac), a superior donor that does not quench UV emission. The combination of TIPS‐Nph and Ir(C6)₂(acac) realizes the efficient UV light production even with weak light sources such as an AM 1.5 solar simulator and room LEDs.