Sorption of cesium on copper hexacyanoferrate/polymer/silica composites in batch and dynamic conditions

The sorption of cesium ions from aqueous solutions on composite sorbents was investigated in static (by the batch method) and dynamic (on column) conditions. The composite sorbents consisted of copper hexacyanoferrate retained by an anion-exchange polymeric layer bound to porous silica beads. The influence of cesium concentration and solution flow rates on cesium sorption were studied. The cesium sorption isotherm obtained is of the Langmuir type. The shape of the breakthrough curves and the sorption capacity for cesium depend on the preparation procedure of the composites.     

Preparation and Ion-Exchange Properties of Mixed Zirconium(IV) Phosphate-Phosphonate Sorbents

Composite sorbents based on Zr(IV) phosphate-hydroxyethylidenediphosphonate with different phosphate-phosphonate ratio were prepared. These sorbents were characterized by elemental analysis, X-ray diffraction, and IR spectroscopy, and their ion-exchange sorption capacity for several transition metals and strontium was studied. The sorption capacity of these sorbents increases with increasing pH.     

Preparation of zirconium phosphate on support material and its application for the sorption of some radioions

Several sorbents were prepared by precipitating zirconium phosphate on activated carbon support material. The main parameters of the chemical procedure were optimized in order to obtain the highest decontamination factors which can be achieved in the case of Cs⁺, Sr²⁺ and I⁻ ions. For the characterization of the sorbents, sorption isotherms and capacity data were determined. The reproducibility of the preparation is about 10%.     

Sorption-atomic-absorption determination of gold using VION chemisorption fibers

The sorption of gold(III) from hydrochloric acid solutions on VION chemisorption fibers containing ion-exchange and complexing groups has been studied. Using these sorbents, a combined sorption-atomic-absorption procedure for the determination of gold has been developed. The procedure has been verified in the determination of gold in gold-containing ores.     

Sequestration of naphthenic acids from aqueous solution using β-cyclodextrin-based polyurethanes

The sorption characteristics of naphthenic acids (NAs) in their anion form with β-cyclodextrin (β-CD) based polyurethanes, as sorbents, from aqueous solutions that simulate the conditions of oil sands process water (OSPW) are presented. The copolymer sorbents were synthesized at various β-CD:diisocyanate monomer mole ratios (e.g., 1:1, 1:2, and 1:3) with diisocyanates of variable molecular size and degree of unsaturation. The equilibrium sorption properties of the copolymer sorbents were characterized using sorption isotherms in aqueous solution at pH 9.00 with electrospray ionization mass spectrometry to monitor the equilibrium unbound fraction of anionic NAs in the aqueous phase. The copolymer sorbents were characterized in the solid state using (13)C CP-MAS NMR spectroscopy, IR spectroscopy and elemental analysis. The sorption results of the copolymer sorbents with anion forms of NAs in solution were compared with a commercially available carbonaceous standard: granular activated carbon (GAC). The monolayer sorption capacities of the sorbents (Q(m)) were obtained from either the Langmuir or the Sips isotherm model used to characterize the sorption characteristics of each copolymer sorbent. The estimated sorption capacity for GAC was 142 mg NAs per g sorbent whereas the polymeric materials ranged from 0-75 mg NAs per g sorbent over the experimental conditions investigated. In general, significant differences in the sorption capacities between GAC and the copolymer sorbents were related to the differences in the accessible surface areas and pore structure characteristics of the sorbents. The Sips parameter (K(eq)) for GAC and the copolymer materials reveal differences in the relative binding affinity of NAs to the sorbent framework in accordance with the synthetic ratios and the value of Q(m). The diisocyanate linker plays a secondary role in the sorption mechanism, whereas the β-CD macrocycle in the copolymer framework is the main sorption site for NAs because of the formation of inclusion complexes with β-CD.     

Platinum Complexation at Sorption of Hexachloroplatinate(IV) Ion with Fibrous N,S-Containing Sorbents Based on Polyacrylonitrile (of TIOPAN Type)

Sorption properties of fibrous nitrogen-containing sorbents based on polyacrylonitrile containing diethyldithiocarbamate (TIOPAN-2) and 8-mercaptoquinoline groups (TIOPAN-6) with respect to the platinum(IV) chloride complex were studied. The effects of the temperature, platinum concentration, and acidity on the metal recovery were determined. The kinetics of sorption and sorption capacity of sorbents in hydrochloric acid and chloride solutions were established. The most probable mechanism of sorption and the composition of compounds formed in the fiber phase were proposed.     

Comparative study on Th(IV) sorption on alumina and silica from aqueous solutions

The effects of pH, ionic strength and concentration on the sorption of Th(IV) on alumina and silica were investigated and the sorption isotherms of Th(IV) on alumina and silica at different pH values were determined. It was found for both sorbents that the absorbability of silica is less than that of alumina. The relative sorption rate of silica is similar to that of alumina. The sorption edges are similar to each other, that the insensitivity of sorption to ionic strength is about the same. These similarities between the sorbents suggest that the speciation of Th(IV) in aqueous solutions plays a significant, but subtle role, in controlling the sorption process, because the charges of both sorbents are distinctly different. The mechanism of Th(IV) sorption on alumina is distinctly different from that of the sorptions of Cs⁺, Eu³⁺ and Yb³⁺ on alumina, and similar to that of the sorption of Co(II) on alumina.     

Physicochemical properties of complexing para-substituted polystyrene sorbents containing functional amino groups

The acid-base properties of the analytical functional groups of complexing polymer sorbents based on aminopolystyrene and the sorption capacity of the sorbents were investigated. The influence of various substituents on the acid-base properties of the sorbents was studied.     

Evaluation of metal fractions in river sediments and waters: application of chelation chromatography-differential pulse anodic stripping voltammetry

The ability of chelation chromatography in combination with differential pulse anodic stripping voltammetry (DPASV) to provide a simple, fast and reliable way of dealing with interionic interferences, competitive complexations, re-adsorption of released metal ions and sorption of spiking metal ions by organic/inorganic materials in the complex matrixes of real natural samples has been critically examined. The technique is based on the selective complexation of target metal fractions on some novel sorbents which are polymeric chelating resins doped on stationary supports (Whatman No. 1 paper and silica gel). The usual complications of leaching of the resin and/or the chelating ligand and colloid retention on the sorption bed at any stage of separation were largely obviated with these sorbents under the operational conditions of metal sorption. A detailed study on the application of such sorbents to the differentiation of ionic (free), labile (ionic plus weakly complexed) and bound (strongly complexed) metal fractions present in local river-sediment and water samples was carried out. Chelating resin-impregnated paper (CRIP) and chelating resin-immobilized silica gel column (CRISC) methods of chromatographic separation of analyte trace metals in combination with the follow-up 'standard addition' procedure of the DPASV technique were employed. A modest attempt has been made to formulate a speciation (fractionation) scheme for metal contents present in river-sediments and waters on the basis of selective retention of ionic and labile fractions on complexing resins.     

Strontium(II) sorption by complexing polymeric sorbents with various structures

Optimal conditions for strontium(II) sorption by new complexing polymeric sorbents (CPSs) from aqueous solutions were studied, namely, optimal solution acidity (pH_opt), pH of 50% sorption (pH₅₀), and optimal time and temperature of quantitative sorption. The strontium(II) sorption capacities of the test sorbents (SCSs) were determined, and sorption isotherms were plotted. The strontium(II) sorption parameters determined were used to recognize the most efficient CPSs.     

Effect of lead on the sorption of phenol onto montmorillonites and organo-montmorillonites

The effect of lead (Pb) on the sorption of phenol onto montmorillonite-based sorbents was studied using a batch equilibration method when phenol and Pb were sorbed simultaneously and either Pb or phenol was previously sorbed. The sorbents were Na(+)-, Ca(2+)-, hexadecyl trimethylammonium (HDTMA)-Na(+)-, and HDTMA-Ca(2+)-montmorillonites. Pb diminished the sorption of phenol largely onto Na(+)- or Ca(2+)-montmorillonites, while phenol had little effect on the sorption of Pb onto all sorbents. Pb had no effect on the sorption of phenol onto HDTMA-Na(+)- or HDTMA-Ca(2+)-montmorillonites either. The sorption capacity of phenol followed the order HDTMA-Na(+)- > HDTMA-Ca(2+)- > Na(+)- > Ca(2+)-montmorillonites. The pseudo-second-order equation described the kinetics of phenol sorption well. Sorption isotherms of phenol followed the Freundlich equation. Phenol sorption on HDTMA-Na(+)- and HDTMA-Ca(2+)-montmorillonites was linear, while that on Na(+)- and Ca(2+)-montmorillonites was nonlinear.     

汞离子天然吸附剂

汞离子是现代工业中剧毒的污染物之一,研究者致力于汞离子高效吸附剂的研制已有多年.本文基于国内外最新研究文献,系统论述了汞离子天然吸附剂如壳聚糖、矿物、微生物及其改性材料等的吸附性能,并详细比较了各种吸附剂的优缺点,指出天然吸附剂来源广泛、价格便宜,尤其是修饰后的壳聚糖吸附性能甚至可以和一些合成吸附剂相媲美.在所报道的天然吸附剂中,引入巯基后的戊二醛交联壳聚糖,对初始浓度为500 mg/L的汞离子的吸附容量可达1 604.7mg/g,属已知的汞离子天然吸附剂中之最.天然汞离子吸附剂在工业废水处理中显示出了广阔的应用前景.     

Beryllium(II) sorption from aqueous solutions by polystyrene-based chelating polymer sorbents

Optimal parameters of beryllium(II) sorption from aqueous solutions by polystyrene-based sorbents have been studied, namely: optimal sorption acidity (pH_opt), pH providing 50% sorption (pH₅₀), optimal time (τ, min) and temperature of quantitative sorption. The sorption capacities of the sorbents under study (SCSs) for beryllium(II) have also been determined; sorption isotherms have been constructed. The parameters determined for beryllium(II) sorption by chelating polymer sorbents (CPSs) make it possible to select the most efficient sorbent for practical use.     

Investigation of the sorption properties of β-cyclodextrin-based polyurethanes with phenolic dyes and naphthenates

The sorption of p-nitrophenol (PNP), phenolphthalein (phth) and naphthenates (NAs) with β-cyclodextrin (β-CD) based polyurethane sorbents from aqueous solutions are reported. The copolymer sorbents were synthesized at various β-CD/diisocyanate monomer mole ratios (e.g., 1:1, 1:2, and 1:3) with diisocyanates of variable molecular size and hydrogen deficiency. The copolymer sorbents were characterized in the solid state using (13)C CP-MAS NMR spectroscopy, IR spectroscopy and elemental (C,H,N) analysis. The equilibrium sorption properties of the copolymer sorbents in aqueous solution were characterized using isotherm models at pH 4.6 and 9.0 for PNP, pH 9.0 for naphthenates and pH 10.5 for phth. UV-Vis spectroscopy was used to monitor the unbound fraction of the phenolic dyes in the aqueous phase, whereas, electrospray ionization mass spectrometry was used to monitor the unbound fraction of naphthenates. The sorption results of the copolymer sorbents were compared with a commercially available carbonaceous standard; granular activated carbon (GAC). The sorption properties and capacities of the copolymer sorbents (Q(m)) were estimated using the Sips isotherm. The sorption capacity for GAC was 2.15 mmol PNP/g, 0.0698 mmol phth/g, and 142 mg NAs/g, respectively, whereas the polymeric materials ranged from 0.471 to 1.60 mmol/g (PNP), 0.114 to 0.937 mmol/g (phth), and 0 to 75.5 mg/g (naphthenates), respectively, for the experimental conditions investigated. The observed differences in the sorption properties were attributed to the accessible surface areas and pore structure characteristics of the copolymer sorbents. The binding constant, K(eq), for copolymer materials for each sorbate is of similar magnitude to the binding affinity observed for native β-CD. PNP showed significant binding onto the copolymer framework containing diisocyanate domains, whereas, negligible sorption to the sites was observed for phth and naphthenates. The β-CD inclusion sites in the copolymer framework are concluded to be the main sorption site for phth and naphthenates through the formation of well-defined inclusion complexes.     

Determination of standard isotherms of the sorption of some vapors with cellulose

Standard isotherms of the sorption of water, methanol, and benzene vapors on cellulose using a cellulose standard are determined. The standard, namely, mesoporous cellulose with specific surface of up to 350 m2/g, is obtained by the method of exchanging water in swollen cellulose with organic solvents. A comparison of the experimental sorption isotherm with the standard isotherm makes it possible to determine the specific surface of celluloses accessible a the given sorbate and, in combination with the Brunauer-Emmett-Teller adsorption equation, to characterize their surface properties. The identity of the sorption properties of the initial and dewatered (porous) celluloses relative to active vapors is shown, which evidences the assumed mechanism of swelling as the sorbent's division into morphological structures with the formation of new surface. A comparative analysis of the sorption properties of cellulose and silica, whose nature of active sorption centers is similar (weak acid hydroxyl groups), has been made. The affinity of the standard isotherms and close values of the cross-sectional area of different sorbates on both sorbents testify the similarity in their sorption behavior. Thus, the processes of sorption with rigid and swelling sorbents can be regarded in a unified context. Therefore, the adsorption models developed for rigid sorbents can be applied to cellulose sorbents to analyze their sorption properties.     

Synthesis and properties of polymeric and organo-inorganic amphiphilic sorbents molecularly imprinted with cholesterol

Polymeric and organo-inorganic sorbents molecularly imprinted with cholesterol were synthesized to create selective hemosorbents for efferent therapy of hypercholesterlemia. These sorbents are block copolymers of 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate and granulated organo-inorganic sorbents in which the imprinting was performed in the layer of the above copolymer on the surface of selenium (Se) nanoparticles stabilized with polyvinyl pyrrolidone. The physicochemical and sorption properties of the sorbents were studied.     

Sorption of methylxanthines by different sorbents

Sorption of caffeine, theophylline, theobromine, diprophylline, and pentoxyphylline on different sorbents (supercross-linked polystyrene, surface-modified copolymer of styrene and divinylbenzene Strata-X, and carbon nanomaterials Taunit and Diasorb-100-C₁₆T) was studied in a static mode in an effort to find new sorbents suitable for sorption isolation and concentration of methylxanthines. The peculiarities of sorption of methylxanthines were explained in relation to the solution acidity, the nature of the sorbates and their concentration, the nature of the solvent, and the structural characteristics of the sorbents.     

Americium(III) sorption from multicomponent solutions by macrocyclic polyester-based sorbents

Americium sorption by crown-ether-impregnated polymeric sorbents from nitric acid solutions and multicomponent nitrate solutions that model process solutions was studied. Sorption of ballast elements by the unimpregnated Porolas-T support was studied. The sorption coefficients K _d of these elements on Porolas-T do not exceed 0.01. Sorption of the same elements by crown-ether-impregnated sorbents was also studied. Dicyclohexano-18-crown-6 (DCH18C6) and its alkyl derivatives were used. Sorption coefficients were determined for all ballast elements. At the final stage of the study, ²⁴¹Am sorption coefficients of from multi-component solutions were determined. The data obtained signify the utility of crown-ether-impregnated sorbents for recovering ²⁴¹Am from multicomponent technological solutions.     

Application of new types of fibrous sorbents for sampling of dissolved species of heavy metals in natural waters

The article discusses the importance and specific features of the preparatory stages in ecoanalytical monitoring of natural water, aimed to determine the content of heavy metals. A procedure was developed for sampling of dissolved species of heavy metals with sorbents. The influence of humic substances on the sorption of heavy metals was elucidated. The results obtained with the technique suggested are reported.     

Assessment of the sorption capacity and regeneration of carbon dioxide sorbents using thermogravimetric methods

Adsorption methods using solid sorbents are an alternative to the absorption technology in the processes of purification gases from carbon dioxide. There is a need to rapidly assess the suitability of sorbents for use it in PSA, TSA, or VPSA installations. Important parameters which determine the quality of the sorbent are the sorption capacity of sorbent, selectivity to CO₂ and the possibility of regeneration. This paper presents the results of sorption/desorption of CO₂ study on the impregnated porous materials using thermogravimetric methods. Thermogravimetry allows for rapid assessment of sorption capacity and regeneration of the sorbents. Specially selected temperature program allowed to determine the sorption capacity of sorbents depending on the concentration of CO₂ in the gas mixture and temperature. Degree of sorbent purification was determined in desorption process.