Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

分步晶化法合成ZSM-5/SAPO-5复合材料

通过分步晶化水热处理的方式合成了ZSM-5/SAPO-5复合材料。研究了两种分子筛凝胶的混合方式、调节ZSM-5母液的酸类型、SAPO-5凝胶组成以及晶化时间对复合材料形成的影响。实验结果表明,简单将两种分子筛的合成凝胶混合不能得到复合材料。采用H₂SO₄调节ZSM-5合成母液的pH值,在ZSM-5与SAPO-5理论质量比为3.5、SAPO-5凝胶中P₂O₅与Al₂O₃摩尔比为1.2的条件下可以得到ZSM-5/SAPO-5复合材料。但样品中含有少量无定形物质,这些无定形通过延长晶化时间并不能完全消除。     

Interaction energies of histidine with cations (H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>)

The imidazol side group of histidine has two nitrogen atoms capable of being protonated or participating in metal binding. Hence, histidine can take on various metal-bound and protonated forms in proteins. Because of its variable structural state, histidine often functions as a key amino acid residue in enzymatic reactions. Ab initio (HF and MP2) calculations were done in modeling the cation (H⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺) interaction with side chain of histidine. The region selectivity of metal ion complexation is controlled by the affinity of the side of attack. In the imidazol unite of histidine the ring nitrogen has much higher metal ion (as well as proton) affinity. The complexation energies with the model systems decrease in the following order: Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. The variation of the bond lengths and the extent of charge transfer upon complexation correlate well with the computed interaction energies.     

Kinetic study of the thermal decomposition of low-grade nickeliferous laterite ores

This study presents an evaluation of the decomposition kinetic of low-grade nickeliferous laterite by thermogravimetric analysis. Kinetic parameters were calculated using the Ozawa and the iso-conversional Friedman methods. Simplified kinetics models like those based on the reaction order were also applied for the simulations. Two-dimensional shrinkage models of the reaction interface mechanism were adopted as describing the thermal transformation process from non-isothermal kinetic analysis. The iso-conversional method (model-free kinetics) reveals that the decomposition of low-grade nickeliferous laterite does not follow a single mechanism because the determined activation energies and pre-exponential factor are not constant during the course of the reaction.     

Model-free kinetics applied for the removal of CTMA<Superscript>+</Superscript> and TPA<Superscript>+</Superscript> of the nanostructured hybrid AlMCM-41/ZSM-5 material

The nanostructured hybrid AlMCM-41/ZSM-5 composite was synthesized starting from a hydrogel with molar composition SiO₂:0.32Na₂O:0.03Al₂O₃:0.20TPABr:0.16CTMABr:55H₂O. The cetyltrimethylammonium bromide (CTMABr) and tetrapropylammonium bromide (TPABr) were used as templates. The above mentioned material presents morphological properties with specific characteristics, such as the surface area of the composite which is approximately half of the surface area of the conventional MCM-41. Another interesting feature is the formation of walls with the double of the density of the MCM-41 structure, which characterizes the hybrid material, resulting in a high stability material for catalytic application. The aim of this study is obtain optimized structures of the hybrid material and for this purpose variations in the synthesis time were carried out. A comparative analysis was performed including X-ray diffraction, Fourier transform infrared spectroscopy, and Thermogravimetry measurements. The model-free kinetic algorithms were applied in order to determinate conversion and apparent activation energy of the decomposition of the CTMA⁺ and TPA⁺ species from the hybrid AlMCM-41/ZSM-5.     

Comparison ofn-decane hydroconversion with Pt/SAPO-5 and Pt/SAPO-11 catalysts

The product distributions from bifunctional conversion ofn-decane over Pt/SAPO-5 and Pt/SAPO-11 catalysts are compared in detail. Selectivities in decane reaction vary largely with the catalyst employed: Pt/SAPO-11 produces high yields of feed isomers, whereas Pt/SAPO-5 gives high yields of cracked products and only under mild reaction conditions are isodecanes the main products obtained. These selectivities seem to be determined by the structure of the catalyst.     

Hydration of the H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes modified with inorganic dopants

The hydration, state, and mobility of protons and Li⁺, Na⁺, and Cs⁺ ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes doped with silicon dioxide and phosphotungstic acid have been investigated by NMR and impedance spectroscopy. The dopants increase the moisture content of the membrane and change the system of pores and channels in which ion transport takes place. At low humidities, the dopant particles are involved in ion transport. The greatest effect is observed for the membranes doped with both SiO₂ and phosphotungstic acid. The water molecules sorbed by dopant particles as a material participate in the hydration of alkali metal cations in the membrane.     

Structures of the nearest surroundings of the K<Superscript>+</Superscript>, Rb<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in aqueous solutions of their salts

Published data on structural characteristics of hydration of K⁺, Rb⁺, and Cs⁺ ions in aqueous solutions of their salts under standard conditions, including authors’ X-ray diffraction data, are summarized and correlated. The structural parameters of the nearest surrounding of the K⁺, Rb⁺, and Cs⁺ ions, such as the coordination numbers, interparticle distances, and types of ionic association, are discussed. It is noted that, because of weak tendency of these cations to hydration, the parameters of their coordination spheres strongly depend on the concentration and chemical nature of counterions.     

Kinetics of solid-phase H<Superscript>+</Superscript>/M<Superscript>+</Superscript> ion exchange on hafnium hydrogen phosphate

The kinetics of solid-phase reactions between hafnium hydrogen phosphate and alkali metal chlorides were studied by thermogravimetry with subsequent analysis of leaving gases. For sodium and potassium chlorides, the reaction occurs in two stages; the first stages produces MHHf(PO₄)₂, and the second yields the MHf₂(PO₄)₃ NASICON phosphate. For rubidium chloride, the reaction is one stage and produces Rb₂Hf(PO₄)₂. For cesium chloride, the reaction is an analogue of the reaction for rubidium chloride, but has two stages. Kinetic data were used to determine interdiffusion coefficients for hydrogen and alkali-metal ions at various temperatures and the activation energies of interdiffusion.     

Selective ion-exchange sorption of K<Superscript>+</Superscript> from aqueous solutions containing Na<Superscript>+</Superscript>-K<Superscript>+</Superscript> mixture on Sn(IV) hydrophosphate

Ion-exchange sorption of K⁺ and Na⁺ from their mixture on X-ray-amorphous and crystalline Sn(IV) hydrophosphates was studied. These sorbents exhibit a high selectivity for K⁺. Amorphous Sn(IV) hydrophosphate can be used for efficient purification of aqueous sodium salt solutions to remove potassium impurity.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1275–1278.Original Russian Text Copyright © 2004 by Smirnov, Dimova, Redchenko.     

The solvation dynamics of Na<Superscript>+</Superscript> and K<Superscript>+</Superscript> ions in liquid methanol

The structure of the solvation shell of Na⁺ and K⁺ in fully deuterated liquid methanol has been studied by ab initio Car-Parrinello molecular dynamics simulations. The solvent cage has been found relatively stable and this property has been explained by means of charge transfer and electrostatic interactions as was previously done for Li⁺ in the same solvent. The differences with Li⁺ such as the increase of the coordination number going from Li⁺ to K⁺ and the reduced stability of the cage have been ascribed to the increase in the ionic radius.     

Structural role of large cations in sulfides with Cs<Superscript>+</Superscript> and Tl<Superscript>+</Superscript>

The results of a crystallographic analysis of the structures of CsFe₂S₃, Tl₂PbZrS₄, and Tl₂PbGeS₄ with a 1:1 cation–anion ratio are used to identify a joint F sublattice for Cs and S in the first compound and two separate F sublattices for cations and anions in the second compound (the PbS structural type). The substitution of the small Ge⁴⁺ (with its tetrahedral coordination by sulfur) for Zr⁴⁺ in the composition results in an increase in the unit cell volume, i.e., a decrease in the packing density for both cations and anions in the structure of the third compound. In the absence of regular F sublattices, there are “two-dimensional” orderings, typical of the PbS type, for the atomic positions in the projections of this structure.     

Synthesis and crystal structure of a supramolecular adduct of trinuclear molybdenum oxocluster with macrocyclic cavitand cucurbit[5]uril containing the included ionic associate Na<Superscript>+</Superscript>...Cl...Na<Superscript>+</Superscript>

The compound of composition [{Mo₃O₄(H₂O)₆Cl₃}₂(Na₂Cl⊂ C₃₀H₃₀N ₂₀O₁₀)]Cl₃⋅14H₂O (1) was prepared by evaporation of a hydrochloric acid solution containing NaCl, the trinuclear aqua complex [Mo₃O₄(H₂O)₉]⁴⁺, and the macrocyclic cavitand cucurbit[5]uril (C₃₀H₃₀N₂₀O₁₀). X-ray diffraction analysis demonstrated that the cucurbit[5]uril molecule is closed on both sides by the cluster cations through hydrogen bonding between the CO groups of the cucurbit[5]uril portals and the aqua ligands of the oxo cluster. The inner cavity of the supramolecular adduct includes an unusual ionic associate Na⁺...Cl...Na⁺. The sodium cations are coordinated by five carbonyl oxygen atoms of each portal of the macrocycle. Compound 1 is the first structurally characterized complex, in which the macrocyclic cucurbit[5]uril ligand is directly coordinated to the alkali metal cation. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1513–1517, July, 2005.     

A kinetic analysis of thermal decomposition of polyaniline/ZrO<Subscript>2</Subscript> composite

Synthesis, characterization and thermal analysis of polyaniline (PANI)/ZrO₂ composite and PANI was reported in our early work. In this present, the kinetic analysis of decomposition process for these two materials was performed under non-isothermal conditions. The activation energies were calculated through Friedman and Ozawa-Flynn-Wall methods, and the possible kinetic model functions have been estimated through the multiple linear regression method. The results show that the kinetic models for the decomposition process of PANI/ZrO₂ composite and PANI are all D₃, and the corresponding function is ƒ(α)=1.5(1−α)^2/3[1−(1-α)^1/3]−1. The correlated kinetic parameters are E _a=112.7±9.2 kJ mol⁻¹, lnA=13.9 and E _a=81.8±5.6 kJ mol⁻¹, lnA=8.8 for PANI/ZrO₂ composite and PANI, respectively.     

Theoretical investigation on the gas phase decomposition of ethyl acetate by Ni<Superscript>+</Superscript>

The density functional theory calculations were performed to systematically investigate the reaction of Ni⁺ with ethyl acetate in the gas phase. The reactive sites and reactivity were predicted by the average local ionization energy (ALIE). All possible reaction pathways were identified, which led to the formation of ketene or ethanol, two acetal units, and acetic acid or ethylene. The product distribution was discussed by means of the Curtin-Hammett principle. In addition, the properties of the chemical bonding evolution along the reaction pathway were studied using various analysis methods including atoms in molecules (AIM) and natural bond orbital (NBO). The frontier molecular orbital interactions were analyzed. The calculation results confirm that there are three reaction paths, in which the path B is the most favorable path, and acetic acid or ethylene is the main product.

Open image in new window

Graphical abstract ?

     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

SAPO—5分子筛的合成与表征

SAPO-5分子筛合成所用的模板剂主要是四丙基氢氧化铵、三乙胺和三丙胺等。目前报道较多的是四丙基氢氧化铵和三乙胺。尚未见以三丙胺(Pr_3N)为模板剂在F~-离子存在下合成SAPO-5分子筛的详细报道。此外,对SAPO-5分子筛合成影响因素的研究还不够系统。本文以三丙胺为模板剂,在F~-离子存在下,合成出SAPO-5分子筛,用多种研究手段进行了鉴定,并对影响合成的诸因素进行了研究和讨论。     

Kinetics of H<Superscript>+</Superscript>/Na<Superscript>+</Superscript> solid-phase ion exchange on iron(III) hydrogen sulfate

The kinetics of solid-phase reaction between iron(III) hydrogen sulfate and sodium chloride was studied by thermal analysis followed by analysis of leaving gases. The exchange kinetics are described by the soft cylinder model. The hydrogen and sodium ion interdiffusion coefficients were determined for various temperatures, as well as the activation energy of interdiffusion. Sodium ion diffusion through the product layer is the rate-controlling stage of the reaction.     

Na<Superscript>+</Superscript>-stimulated ATPase of alkaliphilic halotolerant cyanobacterium <Emphasis Type="Italic">Aphanothece halophytica</Emphasis> translocates Na<Superscript>+</Superscript> into proteoliposomes via Na<Superscript>+</Superscript> uniport mechanism

Background  

When cells are exposed to high salinity conditions, they develop a mechanism to extrude excess Na⁺ from cells to maintain the cytoplasmic Na⁺ concentration. Until now, the ATPase involved in Na⁺ transport in cyanobacteria has not been characterized. Here, the characterization of ATPase and its role in Na⁺ transport of alkaliphilic halotolerant Aphanothece halophytica were investigated to understand the survival mechanism of A. halophytica under high salinity conditions.     

气相转移法合成ZSM-5/SAPO-5复合分子筛

以磷酸、拟薄水铝石和硅溶胶为原料, 三乙胺为模板剂, 采用气相转移法合成了一系列ZSM-5/SAPO-5复合分子筛. 产物经X射线衍射、扫描电镜、X射线能量散射谱、红外光谱及N2 静态吸附法等手段对其进行了表征, 证明合成材料是以ZSM-5为核、SAPO-5为壳的双结构分子筛. 实验结果表明, 干胶制备条件及液相组成都影响复合分子筛的结晶. 晶化温度的提高和晶化时间的延长有利于分子筛结晶度的提高. VPT法可以减小SAPO-5和复合分子筛颗粒的直径, 改善SAPO-5在ZSM-5分子筛表面的分布. 重油裂化结果表明, 核壳结构复合分子筛对生成低碳烯烃的性能优于机械混合的样品.