A silk‐like extensible poly(α,L ‐amino acid) fiber is created by self‐assembly of poly(α,L ‐lysine) and poly(α,L ‐glutamic acid) at their aqueous solutions' interface. Distinguishing features of the PLL/PLG fiber are the high extensibility and good stretch. Stretching after spinning changes this fiber to a rigid and strong one. The concept and the poly(α,L ‐amino acid) fibers themselves open doors for the production of new protein fibers which are more silk‐ and wool‐like. 相似文献
Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.
A novel preparation method for the core‐shell type biodegradable polyesters or biodegradable materials grafted with biodegradable polyesters was developed by alkaline surface treatment of biodegradable polyester films and subsequent enzymatic polymerization of aliphatic lactones, one example of which is shown in this study, i.e., the preparation of poly(L ‐lactide) (PLLA) film grafted with poly(ε‐caprolactone). It is revealed that only alkaline surface treatment or the combination of alkaline surface treatment and enzyme‐catalyzed grafting, the former and the latter, respectively accelerating and delaying the enzymatic degradation of PLLA, will give PLLA materials having a wide variety of biodegradability. Also, the specificity of the enzyme used for hydrolysis could be used to confirm the grafted chain species.
This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm2) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.
The effect of PAMAM dendrimers (generations G3, G4 and G5) on the fibrillation of α‐synuclein was examined by fluorescence and CD spectroscopy, TEM and SANS. PAMAM dendrimers inhibited fibrillation of α‐synuclein and this effect increased both with generation number and PAMAM concentration. SANS showed structural changes in the formed aggregates of α‐synuclein – from cylindrical to dense three‐dimensional ones – as the PAMAM concentration increased, on account of the inhibitory effect. PAMAM also effectively promoted the breaking down of pre‐existing fibrils of α‐synuclein. In both processes – that is, inhibition and disassociation of fibrils – PAMAM redirected α‐synuclein to an amorphous aggregation pathway.
Summary: A novel method for the tailoring of unique three‐phase crystalline systems in isotactic poly(propylene) has been proven. It is based on a synergistic application of a specific β‐nucleating agent and high pressure during crystallization. The formation of a γ phase was supported by elevated pressure and high temperature during crystallization; under these conditions the growth of both β and α phases was significantly suppressed. Nevertheless, during the course of crystallization at lower pressure and/or lower temperatures, strong β‐nucleation efficiency favored the formation of a β phase.
New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.
CDDP is loaded into methoxypoly(ethylene glycol)‐block‐poly(L ‐glutamic acid) (mPEG‐b‐PLG), and a combination with iRGD is applied for NSCLC chemotherapy. The CDDP‐loaded micelles show sustained cisplatin release in PBS, dose‐ and time‐dependent inhibition to HeLa and A549 cell proliferation, and no apparent hemolysis activities. In in vivo studies using subcutaneous NSCLC xenograft models (A549), both free CDDP and CDDP‐loaded micelles show an evident anti‐tumor effect. However, the toxicity of CDDP is significantly reduced in the cases of CDDP‐loaded micelles and co‐administration with iRGD, and the survival time is prolonged by over 30%. Therefore, mPEG‐b‐PLG‐loaded cisplatin and the combination with iRGD provides a promising new therapy for NSCLC.
Films of an α‐cyclodextrin/poly(ε‐caprolactone) inclusion complex have been successfully prepared and show high transparency and heat resistance in comparison to the pure polymer film. The physical properties, such as transparency, mechanical properties, and thermal stability, of the α‐CD‐PCL‐IC films are found to depend on the α‐cyclodextrin‐to‐polymer stoichiometry.
L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.
A novel poly‐L ‐arginine group microcapsule was produced to investigate its nutritional function and pharmacological efficacy. The molecular weight of poly‐L ‐arginine is an important parameter for its membrane strength, but does not obviously affect its release property. Thus, poly‐L ‐arginine can be used as a kind of new membrane material in microcapsules, and it is expected to be used as an therapeutic and biodegradable drug carrier.
Influence of the molecular weight of poly‐L ‐arginine on membrane thickness. 相似文献
A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of 1H NMR analysis.
We report on the modification of the polyelectrolytes poly(L ‐glutamic acid) (PGA), poly(acrylic acid) (PAA), and poly(L ‐lysine) (PLL) with side groups bearing phosphorylcholine (PC) groups. Two different side chains were synthesized from monoamino tri‐ or tetraethylene glycol, both with PC group linked to the OH end: the tert‐butyloxycarbonyl protected compounds BOCNH(EO)nPC (n = 2, 3) and the succinylated compound SucNH(EO)3PC. BOCNH(EO)nPC was deprotected and the resulting amine was condensed with PGA or PAA and SucNH(EO)3PC was directly coupled to PLL. Degrees of substitution as high as 80% were obtained with the method described. These polyelectrolytes are potential candidates to fabricate multilayers with protein repellent properties.
A new functional lactone, α‐iodo‐ε‐caprolactone (αIεCL), was synthesized from ε‐caprolactone by anionic activation using a non‐nucleophilic strong base (lithium diisopropylamide) followed by an electrophilic substitution with iodine chloride. Ring‐opening (co)polymerizations of the resulting monomer with ε‐caprolactone were carried out using tin 2‐ethylhexanoate as a catalyst in toluene at 100 °C. Homopolymerization of αIεCL was achieved, and poly(αIεCL) was fully characterized by SEC, 1H NMR and elemental analysis. Random copolymerizations of αIεCL with εCL were controlled with experimental molecular weights close to the theoretical values, narrow molecular weight distributions and a good agreement between experimental and theoretical molar compositions of αIεCL.
Three types of copolymers of poly(L ‐lactic acid) (PLLA) were synthesized by direct polycondensation of L ‐lactic acid and phenyl‐substituted α‐hydroxy acids (L ‐phenyllactic acid and D ‐ and L ‐mandelic acids). It was found that the glass transition temperature of the copolymers comprising L ‐mandelic acid became significantly higher (from 58 to 69 °C) with increasing content of L ‐mandelic acid (from 0 to 50 mol‐%) although the Mw decreased (from 87 000 to 4 000 Da). The cast films of the L ‐mandelic acid containing copolymers showed improved tensile properties compared with those of the PLLA film. This may be due to a pinning effect of the L ‐mandelic acid units on the helix formation of PLLA, although 30% of the units were racemized. The enzymatic degradability of the L ‐mandelic acid containing copolymers was much higher than that of PLLA, as analyzed with Proteinase K® originating from Tritirachium album.
Synthesis of copolymers of L ‐lactic acid and phenyl‐substituted α‐hydroxy acids. 相似文献
A series of amphiphilic poly(L ‐leucine)‐block‐poly(ethylene glycol)‐block‐poly(L ‐leucine) (PLL‐PEG‐PLL) hybrid triblock copolymers have been synthesized. All the blocks in this system have good biocompatibility and low toxicity. The PLL‐PEG‐PLL copolymers could self‐assemble into micelles with PLL blocks as the hydrophobic core and PEG blocks as the hydrophilic shell, which were characterized by FT‐IR, 1H NMR, and transmission electron microscopy analysis. The critical micellar concentration of the copolymer was 95.0 mg · L−1. The circular dichroism spectrum shows that the PLL segments adopt a unique α‐helical conformation, which is found to play an important role in controlling the drug release rate. The drug release could be effectively sustained by encapsulation in the micelles. The copolymers may have potential applications in drug delivery.
Summary: 5‐Fluorouracil‐poly(L ‐lactide) (5‐Fu‐PLLA) microparticles have been prepared by an SEDS process. First, the 5‐Fu is successfully micronized and is then used to produce the 5‐Fu‐PLLA microparticles. The 5‐Fu‐PLLA microparticles synthesized by the SEDS process exhibit a rather spherical shape and a narrow particle size distribution, where it ranges from 615 to 1 990 nm, with a mean particle size of 980 nm. The dichloromethane residue in the 5‐Fu‐PLLA microparticles without any further treatment is 46 ppm. The average drug load and encapsulation efficiency of the 5‐Fu‐PLLA microparticles are 3.05 and 17.8%, respectively. The rate of drug release from the 5‐Fu‐PLLA microparticles shows mainly first‐order kinetics.
Scanning electron spectroscopy image of 5‐Fu‐PLLA microparticles. 相似文献
The present article reports on a strategy for the functionalization of multi‐walled carbon nanotubes (MWCNTs) by grafting with various polymer chains. Copolymers consisting of α‐methylstyrene (AMS) and a second monomer, that is glycidyl methacrylate (GMA) or styrene (St), were synthesized in advance. The copolymers were heated in the presence of MWCNTs in solution, decomposition of the AMS sequences occurred, providing macroradicals, which further attacked the double bonds on the MWCNT surfaces. Grafting of the copolymer chains onto the surface of the MWCNTs was thus achieved, as demonstrated by FT‐IR, XPS and Raman technologies. The resulting poly(AMS‐co‐GMA)‐g‐MWCNTs could be uniformly dispersed in N,N‐dimethylformamide (DMF) and acetone, and the poly(AMS‐co‐St)‐g‐MWCNTs also could be uniformly dispersed in DMF.
Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et2O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.
The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG. 相似文献
A compositional graded film of poly(ε‐caprolactone) (PCL) with 4,4′‐thiodiphenol (TDP), in the film thickness direction, was fabricated by self‐diffusing of TDP in the PCL melt. We found out the self‐bending deformation of the gradient film, which bent into a rolled‐up shape by itself. The initial shape of the film was flat when the sample was quenched from the melt. Upon the fast crystallization of PCL, the gradient film bent to the side with low TDP content. Then, after PCL crystallized the film bent to the opposite direction, that is, to the side with high TDP content. This bending to the TDP rich region was induced by not only the crystallization of PCL but also mass transfer due to the diffusion of TDP from TDP rich region to poor region.
